S205: Display Auto Dimming - How to turn off?

Hey,
I must admit that I am in a real rage right now. I recently updated the AMD Vision Center, but now I am facing my display dimming itself when there is a black background somewhere. On the other hand it turns up the brightness, when there is a white background, which is really killing my eyes. Which intelligent person at lenovo thought about implementing this !"=)!"§$(U§=()$§$()§)$="§)( feature? 
I can't see any option to turn this **bleep** thing off. 
I would really appreciate it, if you could help me.
Thanks...
PS: ah and Lenovo: This is going to be my last laptop I bought from you. Kthxbai.
Solved!
Go to Solution.

Hi junkilop,
This feature is called Vari-Bright and can be turned off in the AMD Vision Engine Contol Center. Look for Power and then under PowerPlay.
Right there you will find Enable Vari-Bright, which gets enabled everytime you update the graphic drivers.
Hope that helps,
witteks
Btw, why don't you post in the german IdeaPad forum

Similar Messages

  • Retail Display / Demo Mode: How to turn off

    Hello, I recently got a Q10 from a seller on ebay and the unit is in DEMO / RETAIL DISPLAY MODE; can anyone tell me how to turn this off so I can use the phone?
    Or should I just reload the OS using Link or Sachessi? Would that do the trick?
    Thanks. 
    Solved!
    Go to Solution.

    But yeah, in any case, reloading the OS should get rid of demo mode if you don't have access to the password.

  • How i turn off the cinema display?

    How i turn off the cinema display?

    Unfortunately there is no on off switch.
    The best you can do is sleep the display or
    unplug it.
    I don’t know what unplugging it will do/cause.
    You can try it.
    Thanks ... Ken

  • HT4623 How to turn-off tap display during passcode entry

    I recently bought Iphone 4s. I like the phone as such but one thing that I want to change is tap display while entering the passcode on lock screen. I don't want to see which keys I am entering as this can put my phone on risk as anyone close to me can see what keys I had pressed to unlock the phone.
    Please help to let me know "How to turn-off tap display during passcode entry" on locked screen.
    Thanks for the answers and suggestion.

    This cannot be done.  You should simply hide the display from others' view.
    iPhone 5S allows you to use your fingerprint instead of the passcode.

  • How to turn off macbook pro15" screen display ?

    Hi. how to turn off screen display on my macbook pro15" ?
    [email protected]

    Maybe this will help +Use a MacBook with the main display off+:
    http://hints.macworld.com/article.php?story=20060607121656766

  • Professional 7: How to turn off display of tab order numbers in a form?

    When I open a PDF which has form fields, it displays each form field's tab order number. They appear as little boxed numbers in the upper left-hand side of each form field. Can anyone let me know how to turn off the display of these tab order numbers?
    Thanks in advance for your help.

    Bernd Alheit wrote:
    But I can't see the numbers in the original form.
    Have they posted the original form somewhere? I just see a couple of image files that the OP posted.

  • Safari and webmail email alerts - how to turn off?

    One of the webmails I use has annoying feature - it alerts me with every incoming email. Safari icon starts to jump at the Dock and a small window appears telling me that I have email!
    I have searched my webmail settings but there is no way to turn it off. So there should be one at the Safari or Mac settings but I did not find anything there either! I have turned off pop-ups but apparently this small "thing" that appears is not considered a pop-up.
    Can anyone help me how to turn off this distraction?
    Sasha
    P.S. My Mac is iMac Intel and Safari is 2.0.4

    There is an option under Preferences > Auto-Correction to "Automatically detect email and web addresses." You want that one unchecked. There is also a link inspector, second from the right, with options to enable hyperlinks or make all hyperlinks inactive. Seems contradictory to me & I've found that if a document already has some linked text, changing these preferences doesn't change the existing links. And, if you paste in something with a link the link will still be active.

  • How to turn off sound when iMac starts up

    how to turn off or turn down sound when my imac starts up

    debrafromusa,
    This would be an extremely bad idea, the start up tone is there for a reason. It tells you when your system is attempting to  boot, it is also necessary in the even resets like a PRAM reset are done. There is software to mask the sound however as stated it is a very poor idea.
    Also, why turn it off. Why not simply put the display to sleep when the machine is not in use. You can easily do that in System Preferences - Energy Saver

  • How to turn off automatic backups in logic 8?

    How to turn off automatic backups in logic 8?
    there was the option to turn off auto backups in v.7.
    can't find it in 8...
    thanks for help!

    This option has been removed.

  • How to turn off "Copy Files on Import"

    I'm new to Photoshop Elements 9 and the Organizer.  I'm trying to import my pictures into the organizer but I don't want to copy the file from the network drive to my local Macbook hard drive.  Unfortunately I can't figure out how to turn off the "Copy Files on Import" checkbox.
    From within the Organizer I am selecting:
    File -> Get Photos and Videos -> From Files and Folder
    This opens a Finder window and I can navigate to the network drive, select the source folder, and select the files I want to import.  I just can't seem to figure out how to disable the "Copy Files on Import" option.  Is there something in Prefences that I need to change to allow me the option?
    Thanks,
    Vince

    From the PSE9 help :
    Add files from specific folders
    In the Elements Organizer, from the Display menu, select Folder Location.The folder hierarchy panel opens on the left side of the Media Browser.
    In the folder hierarchy panel, browse to the folder containing the files you want to import.
    Right-click/Control-click the folder, and choose Import To Organizer.The Getting Photos dialog box will report whether files were imported.
    Click OK.
    If files were imported, the folder’s icon changes from an Unmanaged Folder icon to a Managed Folder icon .

  • How to turn off t9

    hi in my i5 dictionary is suggesting words while i am texting.
    some times i want to type in my own laguage or some other..how to turn off this dictionary feature?
    rg,
    ravi kiran

    Go to Settings>General>Keyboard and turn off Auto-correction

  • NOT SURE HOW TO TURN OFF RESTRICTIONS AS i DO NOT HAVE A PASSCODE

    not sure how to turn off restrictions

    Are restrictions enabled? If they are and you don't know the restrictions passcode:
    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding passcodes
         If you have forgotten your Restrictions code, then follow the instructions
         below but DO NOT restore any previous backup. If you do then you will
         simply be restoring the old Restrictions code you have forgotten. This
         same warning applies if you need to restore a clean system.
    A Complete Guide to Restore or Recover Your iDevice (if You Forget Your Passcode)
    If you need to restore your device or ff you cannot remember the passcode, then you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and re-sync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone, iPad and iPod touch software.
    Try restoring the iOS device if backing up and erasing all content and settings doesn't resolve the issue. Using iTunes to restore iOS devices is part of standard isolation troubleshooting. Restoring your device will delete all data and content, including songs, videos, contacts, photos, and calendar information, and will restore all settings to their factory condition.
    Before restoring your iOS device, Apple recommends that you either sync with iTunes to transfer any purchases you have made, or back up new data (data acquired after your last sync). If you have movie rentals on the device, see iTunes Store movie rental usage rights in the United States before restoring.
    Follow these steps to restore your device:
         1. Verify that you are using the latest version of iTunes before attempting to update.
         2. Connect your device to your computer.
         3. Select your iPhone, iPad, or iPod touch when it appears in iTunes under Devices.
         4. Select the Summary tab.
         5. Select the Restore option.
         6. When prompted to back up your settings before restoring, select the Back Up
             option (see in the image below). If you have just backed up the device, it is not
             necessary to create another.
         7. Select the Restore option when iTunes prompts you (as long as you've backed up,
             you should not have to worry about restoring your iOS device).
         8. When the restore process has completed, the device restarts and displays the Apple
             logo while starting up:
               After a restore, the iOS device displays the "Connect to iTunes" screen. For updating
              to iOS 5 or later, follow the steps in the iOS Setup Assistant. For earlier versions of
              iOS, keep your device connected until the "Connect to iTunes" screen goes away or
              you see "iPhone is activated."
         9. The final step is to restore your device from a previous backup.
    If you can not restore your device then you will need to go to recovery mode.
    Placing your device into recovery mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
         1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the other end
             of the cable connected to your computer's USB port.
         2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the
             red slider appears, then slide the slider. Wait for the device to turn off.
              If you cannot turn off the device using the slider, press and hold the Sleep/Wake
              and Home buttons at the same time. When the device turns off, release the Sleep/Wake
              and Home buttons.
         3. While pressing and holding the Home button, reconnect the USB cable to the device.
             The device should turn on. Note: If you see the screen pictured below, let the device
             charge for at least ten minutes to ensure that the battery has some charge, and then
             start with step 2 again.
         4. Continue holding the Home button until you see the "Connect to iTunes" screen.
             When this screen appears you can release the Home button.
         5. If necessary, open iTunes. You should see the following "recovery mode" alert:
         6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • RSSTAT1 after upload. Problems + how to turn off?

    Hi experts,
    We have had a problem with an upload to one cube. After the upload was finished, the program rsstat1 automatically started, but never commited (step callback was never performed in the background job). Due to this, the transaction log in the DB was never released.
    Question1: how to turn off the automatic start of the rsstat1? Is it connected to BW statistics? We are currently not using any BW Statistic cubes.
    Question2: What could be the reason for this job to fail (start but not performing the call back.) Any ideas?
    Thanks

    Ahhhh... Doh!  Ok, so, X server has built-in display power management and using the keyboard or mouse will interrupt DPM, but it looks like the DPM doesn't have the ability to recognize movement on the screen to interrupt the computer from going to sleep.  Good to know, thanks Ashren.  Is there a program that can do this though, that anyone hasheard of?

  • How to turn off EDGE

    Hi,
    I can't find solution on how to turn off the EDGE when I am not using the internet or email. I googled for the answer but nothing seemed to helped. Can somebody help me here.
    BB Curve 8520

    sherebabu wrote:
    I try this out but it is not converting to wifi. please tell me the solution to properly turn off edge.....I m using black berry bold 9780...
    You do not want your EDGE signal?
    Manage Connections > Mobile Network > turn off your mobile data.
    Now, try only using WiFi and data, such as using the browser. Does that work?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How absolutely turn off computer if I use lilo boot loader?

    How absolutely turn off computer if I use lilo boot loader?
    With this /etc/lilo.conf content computer not absolutely turn off:
    # /etc/lilo.conf
    boot=/dev/hda
    # This line often fixes L40 errors on bootup
    # disk=/dev/hda bios=0x80
    default=arch
    timeout=0
    lba32
    prompt
    image=/boot/vmlinuz26 append="apm=power-off"
    label=arch
    root=/dev/hda1
    initrd=/boot/initrd26.img
    read-only

    Please provide some system specs so that we may give better advice. As phrakture has already said, you must have hardware that supports power management before auto shutdown works.

Maybe you are looking for