S205 drive D: & DVD issues

Hello,
Recently I started having issues with my Ideapad S205. I got a malware program that tried to force me to buy their software to remove it. In the process of trying to get rid of the problems it caused, I decided to use the Lenovo recovery key. The only option it gave me, was to go to the initial setup. Like a dummy I clicked on that and was taken back to day one. I subsequently found out that my back up partition did not work and I could not alter it so that it would work. I get constant error messages that I don't have enough room for a backup.
My other issue is that I purchased the Lenovo DVD/CD player, and it worked fine for a while. Now when I try to install software or load a music file, It won't proceed after the initial spin up and disk content window. The only thing I have been able to do with it, is to view a backup photo disk that I made some time ago.
Any help will be greatly appreciated.
Thank you,
Joe

Hello Yigit,
I just hooked my Lenovo USB portable DVD burner model DB50, up to my Lenovo desktop and ripped a music CD (something it would not do with the Ideapad), and it worked fine.
As far as the D: drive, here is what it says when you go to the "manage windows backup space " folder.
Data file backup      4.51GB
System Image     15.38 GB
Other files               1.60 GB
Free space             7.51 GB
Total size              29.00 GB
When I click on the "Change settings", I can click on "Let windows manage the space" or "Keep only the latest image", and it doesn't make any difference. If I "select a backup period to delete" it only shows the 4.51 GB data file as an option. I can click "refresh" and the next time it tries to do a backup, I'll get the same error message.
My gut feeling is that there are some corrupted driver files, but trying to find the right files on the Lenovo website to download is like trying to find a precise grain of sand on the beach, at least for me.
Thanks for your assistance.

Similar Messages

  • Secondary hard drive and dvd drive have the same location id's.

    Product Name: HP Pavilion dv7 Notebook PC (DV7t-7000)
    PRODUCT NUMBER: A5F92AV
    SERIAL NUMBER: [removed for privacy]
    My Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
    Secondary hard drive and dvd drive have the same location id's. The dvd drive can not write to any disk because of it. Had the dvd drive replaced and that did not help. Tried 3 different HDD and all the same outcome.
    Please help,
    Thank you
    -Rick

    This is what chat support said... Its like talking to yourself sometimes!!
    [Wednesday, October 24, 2012 10:33 PM] -- Automatically generated message:
    Your support request has been submitted and is in queue. Please wait momentarily while the system connects you with the next available support specialist.
    [Wednesday, October 24, 2012 10:46 PM] -- Automatically generated message:
    You are now chatting with support specialist JOLLY R.
    [Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
    Welcome to HP Total Care for Notebook and Desktop support. My name is Jolly. I will be your technical support specialist today. Please give me a few moments to review your issue description details.
    NOTE: For security reasons, PLEASE DO NOT send credit card information via chat.
    [Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
    How are you doing today ?
    [Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
    Hi Jolly, I tried 3 different HDD's all of them were reformated and reimaged with the HP image from this laptop. When I try to populate the drive, it just closes the window. Same with the dvd drive. Other then no able to write to the dvd/cd drive, everything else is perfect. But that is not good enough...
    [Wednesday, October 24, 2012 10:46 PM] -- Rick Friedman says:
    Great, you?
    [Wednesday, October 24, 2012 10:46 PM] -- JOLLY R says:
    I am fine. Thank you for asking.
    [Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
    Please let me know if the following details are correct for the notebook in question.
    PRODUCT NUMBER: A5F92AV
    SERIAL NUMBER: {Private Information Removed}
    EMAIL ADDRESS: {Private Information Removed}
    Am I correct?
    [Wednesday, October 24, 2012 10:48 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:48 PM] -- JOLLY R says:
    Thank You for confirming the details.
    [Wednesday, October 24, 2012 10:49 PM] -- JOLLY R says:
    Are you using the same notebook to chat with me which is in question?
    [Wednesday, October 24, 2012 10:49 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:51 PM] -- JOLLY R says:
    May I know since when you are facing the issue?
    [Wednesday, October 24, 2012 10:51 PM] -- Rick Friedman says:
    I few weeks ago now
    [Wednesday, October 24, 2012 10:52 PM] -- Rick Friedman says:
    HP swapped out the DVD drive and I swapped out the HDD's
    [Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
    Please click on the start button and click on computer.
    [Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
    Reimaged, renamed, removed, rotated them to different bays.
    [Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
    ok
    [Wednesday, October 24, 2012 10:53 PM] -- Rick Friedman says:
    Open\
    [Wednesday, October 24, 2012 10:53 PM] -- JOLLY R says:
    Is the CD/DVD drive getting detected ?
    [Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:54 PM] -- Rick Friedman says:
    Yes
    [Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
    So you need te reseat the CD/DVD drive and the hard drive .
    [Wednesday, October 24, 2012 10:55 PM] -- Rick Friedman says:
    I did, over and over and over
    [Wednesday, October 24, 2012 10:55 PM] -- JOLLY R says:
    Okay
    [Wednesday, October 24, 2012 10:56 PM] -- Rick Friedman says:
    I have swapped out the dvd drive and hard drives
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    Since you have already reseated the hard drive and CD/DVD drive, you need to send the notebook in for a bench repair.
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    It will be a mail in repair service. I will send you a box along with packaging materials and a prepaid shipping label. Once you pack your notebook in the box you can drop it off at you nearest fedex drop box or you can schedule a pickup.
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    Box would contain- packaging material, shipping instructions & pre-paid shipping label.
    • Once you receive the box you need to put the notebook inside the box (without any accessories), call fed-ex- (1800-463-3339).
    • Fed-ex would come at your place pick it up and send it back to hp.
    • This service will cost you $0.00
    • Standard turn around time for service is 7-9 business days.
    You can check the status of your order by going to: www.hp.com/go/csostatus or by calling HP Customer Care at 1-800-hpinvent (1-800-474-6836).
    Your repair service has an estimated turn around time of 7 to 9 business days from when we receive your product at our repair center.
    [Wednesday, October 24, 2012 10:57 PM] -- JOLLY R says:
    In order to set up a service request please provide the following information:
    * Full Name:
    * Mailing Address (No P.O. Boxes):
    * Apartment/Building/Mailstop:
    * City:
    * State:
    * Zip/Postal Code:
    * E-Mail address
    * Phone Number (including area code):
    * Best time to call
    * Time zone of your region
    [Wednesday, October 24, 2012 10:57 PM] -- Rick Friedman says:
    Dont I have on-site?
    [Wednesday, October 24, 2012 10:58 PM] -- JOLLY R says:
    Let me check.
    [Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
    This laptop is my life, my livelyhood.
    [Wednesday, October 24, 2012 10:59 PM] -- Rick Friedman says:
    I can not be without iot...
    [Wednesday, October 24, 2012 11:00 PM] -- JOLLY R says:
    I do understand that .
    [Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
    Yes, you do have onsite , but a technician can be sent to your place only if any part needs to be replaced .
    [Wednesday, October 24, 2012 11:02 PM] -- JOLLY R says:
    As the notebook needs to be repaired , you have to send it to the HP service center.
    [Wednesday, October 24, 2012 11:02 PM] -- Rick Friedman says:
    It is the motherboard
    [Wednesday, October 24, 2012 11:03 PM] -- Rick Friedman says:
    What is the difference between repair and replaced?
    [Wednesday, October 24, 2012 11:03 PM] -- JOLLY R says:
    It will be repaired and returned back to you .
    [Wednesday, October 24, 2012 11:04 PM] -- Rick Friedman says:
    But what is there to be repaired if your not replacing anything?
    [Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
    If any hardware part needs to be replaced , a technician can be sent to your place .
    [Wednesday, October 24, 2012 11:04 PM] -- JOLLY R says:
    But since the notebook needs to be repaired ,you have to send it .
    [Wednesday, October 24, 2012 11:05 PM] -- Rick Friedman says:
    What is the difference between repaired and replacing something... So you mean that nothing will be repaired on my laptop?
    [Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
    This is NOT right
    [Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
    I mentioned earlier that you need to send the notebook for repair.
    [Wednesday, October 24, 2012 11:06 PM] -- Rick Friedman says:
    I would like to talk to someone about this.
    [Wednesday, October 24, 2012 11:06 PM] -- JOLLY R says:
    It will be repaired and returned back to you .
    [Wednesday, October 24, 2012 11:07 PM] -- Rick Friedman says:
    What is the turn around time on this?
    [Wednesday, October 24, 2012 11:07 PM] -- JOLLY R says:
    It is 7 to 9 business days.
    [Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
    NO WAYYYY!
    [Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
    If you want to talk to someone , you need to call our voice support in the direct number 1-800-474-68386 and refer to serviceticket number - {Private Information Removed}.
    [Wednesday, October 24, 2012 11:08 PM] -- Rick Friedman says:
    OK, thx
    [Wednesday, October 24, 2012 11:08 PM] -- JOLLY R says:
    We also have an expedite shipment, where the turn around time is 4 to 6 business days .
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    Please take down the service ticket number {Private Information Removed} and SR ID {Private Information Removed} for future reference.
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    You are welcome.
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    Is there anything else apart from this I can help you with now ?
    [Wednesday, October 24, 2012 11:09 PM] -- Rick Friedman says:
    No
    [Wednesday, October 24, 2012 11:09 PM] -- JOLLY R says:
    Thank you

  • Updating of firmware for drive Optiarc DVD Rw AD-5680H

    updating of firmware for drive Optiarc DVD Rw AD-5680H
    it seems compulsory since burning of DVD Verbatim disks are failed
    but successful with Verbatim DVD -RW
    Mac Mini ,Mountain Lion etc
    the drive of my PowerBook Pro
    works well
    Mashita DVD -R UJ -868
    where can I find and download this updafe
    THKS

    Failure with one type of optical media and not another -- even from the same manufacturer -- is not unusual. DVDs and DVD-RWs use different dies that respond to different lasers in the optical drive. There are numerous other possibllities here.
    It would not be unusual if the write laser for DVDs has burned out but the DVD-RW is still working becasue they use entirely separate lasers of a different intensity and frequency.
    It may be the dyes used in a particular lot of Verbatim DVDs are not quite compatible with the DVD lasers in your drive (that is independent of DVD-RWs because they use different lasers.
    Because of manufacturing variations your drive may burn other brands of DVD blanks flwlessly, but just won't work with Verbatim DVD blanks.
    The DVD Read/Write lasers in your drive may simply be dirty.
    Changing/updating the firmware in an optical can be done, but there is a definite risk of converting the optical drive into something useful only as a paper weight.
    Try another brand of DVD blank or even a different model Verbatim. (I have seen cases where discs from a different manufacturing lot from the same vendor worked when another failed.)
    If you are using DVD-R blanks try a DVD+R (there again different lasers are involved.
    It is tricky to clean slot loading optical drives, but sometimes simply blowing them out with short bursts of canned air will work. Be sure the computer has been powered down for a good while and the optical drive is completely cooled. Then use only short bursts of air to prevent super cooled liquid air from getting into the drive. That can easily crack the lenses if you aren't careful.
    If your Mac mini is less than a year old or you have Apple Care, get an appointment and take it to the Genius Desk of the nearest Apple store. If you aren't covered under warranty a bus powered external optical drive very probably costs less than the labor charge to diagnose the issue with your drive.

  • DVD drive has DVD stuck and will not eject or read DVD?  DVD is 4 months old.  What do I do?

    DVD drive has DVD stuck and will not eject or read DVD?  DVD is 4 months old.  What do I do?

    Try issuing this command in the Terminal application followed by the Return or Enter key:
    drutil eject
    Might take several attempts
    OT

  • Toshiba Satellite L3** CD/DVD issue !!! Here is my solution. How about you?

    Hello everyone. Nowadays, I see on this forum people are discussing about the CD/DVD issues on L30/L300/L350. I would like to share my experience on this issue and hope everyone shares your experience as well.
    My laptop are Toshiba L30 PSL33 and Toshiba L300 PSLB2E. I am lucky that I have no problem with CD/DVD discs/drives as I can read/write/play CD/DVD smoothly. However, I used to have some problems with CD/DVD drive on my notebook. Here is my experience.
    1) Make sure there is no other CD/DVD softwares on your computer (except the orginal software from Toshiba). Especially to those who have been used to using Nero. If you have problems, try to remove Nero and test with the one supported by Windows
    2) If you still have problems, try to update the firmware of the DVD drive. It can be done by visiting the Toshiba Support Driver site (http://eu.computers.toshiba-europe.com/). Check what drive you have by looking at the Device Manager. Download the newest firmware from there and update your drive.
    3) My last solution. If you have Vista pre-installed, try to get a XP version on your computer and do not install any other software. Test/copy a CD by using windows writing tool to see whether the problem is solved or not.
    In my opinion. the main reasons you may encournter are: there are CD/DVD drives have XP firmware base and need to be updated so that they can be used in Vista; or there are software like Nero and PowerDVD are causing the conflict between the ACPI controllers (real and simulated).
    Hope this may help you all. If you have other experiences, please share with everyone.
    PS: Please excuse my language as I am not an English speaker.
    Edited by: Admin

    Hi anhchuong!
    Thanks for this nice solution instructions. In future, this ways,s mentioned by you, should be checked first.
    I really like this one!
    Rock on dude! ;)

  • New External DVD Issues

    New Computer:  HP Envy m6 Notebook PC
    New External DVD Drive:  LG SP60
    System:  Windows 8
    Issue:  I place a DVD movie into external drive and there is no "auto play" function and no queue for me to start or play the DVD movie.
    I have properly installed the external drive.  I have used the drive to install other items including my printer.  So it is not a mechanical or core function issue with the drive.  
    I was "forced" to download Cyberlink Media Suite; however, there is no button or queue to click to watch the DVD in the drive.  All items are related to burning a DVD.
    I have tried several other DVDs that are in excellent condition on a totally separate device.  So I know it is not a DVD issue.  
    In the "my computer" it shows that there is a movie but it also shows that there are 3 main files, all with additional subfiles.  None look like they are "clickable" to play the movie.
    I am searching for a simple one to two click process to play a DVD--not a process that requires several subscreen maneuvers.  
    Windows Media Player does not recognize the DVD movie either.  
    Help please . . . . 

    Hi,
    I would not allow external USB devices to run Auto Play because virus can come in to play. For Windows 8, WMP is not a good product to play DVD. The DVD Player on CyberLink suite should play DVD's for you. You can also use a free product called vlc, which can play nearly all video formats.
        http://www.videolan.org/vlc/download-windows.html
    Regards. 
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • CD Drive or DVD drive is missing or is not recognized by Windows or other programs - this happens any time I upgrade itunes

    I just upgraded to the new version of itunes for my ipod touch.  My CD Drive or DVD drive is missing or is not recognized by Windows or other programs occurs and it does not show up listed as part of my computer.  How can I fix this?

    Your DVD drive? Why would this be missing after a iTunes download?

  • HT4407 When installing Windows 7 using Bootcamp, I get message: "Need 64-bit Windows Installation USB drive or DVD."  I thought my install disk was for 32 or 64 bit.  What does this mean?

    When Installing Windows 7 using Bootcamp, I get message:  "Need 64 bit Windows installation USB drive or DVD."  What does this mean?

    It means you need the 64 bit Version of Windows on a USB stick or DVD.

  • Hard drive and dvd are not recognized in the setup menu, what could be wrong?

    The hard drive and dvd drive are not recognized on the setup menu for my Pavilion a4316f desktop computer.  Could it be a failure of the controller?  Can a PCI controller be used to replace the mother board controller?
    This question was solved.
    View Solution.

    The Recovery process would erase you hard drive, and attempt to install a fresh OS. Decidely a bad choice if you wanted to save your data files. The Recovery sets are "tattoo" with the BIOS hardwafre configuration. It will not, IMHO, recognize the PCI Sata card.
    You mentioned the Recovery program on the hard drive actually requested the installer of the controller (PCI card). Try running from that.
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Legacy IDE Hard Drive and DVD Drive

    I wondered if anybody could send me in the right direction with this...
    I have got the A55M-E33 motherboard and try to connect my old hard-drive and DVD drive (both IDE) to the motherboard using IDE to SATA converters. The BIOS detects both drives, however I don't think I got the right BIOS settings to accommodate the way the drives should be addressed. Has somebody used this kind of setup and would kindly share their experience please?
    Thanks

    what doesn't work?
    also provide detailed system specifications, see >>Posting Guide<<

  • I can not take out the DVD RW disc from the drive PIONEER DVD-RW DVRTS09

    I have a iMac 2010.
    I can not take out the DVD RW disc from the drive PIONEER DVD-RWDVRTS09
    Disk inside the computer. But there is no information about it on the desktop and server tools "Disk Utility"
    What should I do?
    Restart Computer literacy is already done
       Firmware revision: Q90B
       Connection: ATAPI
       Supports recording: Yes (drive supplied Apple)
       Cache: 2000 KB

    Restart computer while holding down continuously on the left click button of the mouse. Continue to hold until the disk is ejected.

  • Error burning to LaCie drive from DVD Studio Pro 3...

    Whenever I attempt to burn a DVD to my LaCie d2 DVD+-R drive, using DVD Studio Pro 3, I get an 'error #6' and the burn is unsuccessful. At the 'formatting' stage the process hangs up after a couple of minutes and returns an error message with the following text:
    "The recording device reported error #6: Power on, reset, or bus device reset occurred. (0x29, 0x00.)"
    Has anyone else experienced this? I have used both DVD+R and DVD-R discs. I have used the device on two different G4s--a 733MHz, and a dual-1.25GHz. I have worked with the source files on the hard drive, as well as on an external drive. The size of the project is nowhere near capacity for a DVD.
    But the result is always the same: Burn aborted, 'error #6.' I'm at my wit's end. Thanks for any suggestions or insight...

    hey terry
    you say you are directly burning from DVDSP to your lacie drive, correct? is it an internal drive? did you recently replace your drive?
    if it is, go to "about your mac" on finder and click on "more information".
    look at your ATA and or "burner" (something to that effect) and make sure that is "vendor supported" because if it is not, iTunes, DVDSP and iDVD will have problems burning media directly from those apps.
    the easiest way to fix this is with "patchburn". it will make your drive compatible or "supported" by able and you will have NO problems buring.
    question: do you have another burning program (such as toast)? do you have problems burning from the finder?

  • No hard drive or dvd-rom

    Hi Guys,
    I have just had a system built for me , which contains the following
    MSI Neo 965 Mobo
    Intel core duo e6400 conroe 2.13ghx
    320gb SATA hard drive
    1gb DDR2 800mhz Ram
    I have installed my own radeonx1950pro 512mb card and my dvd rom(ide).
    When i first turn my pc on at the diagnostic screen where it shows what is connected (ide primary/master ) it has none , i then get two options f1 to continue and del to enter setup. if i press f1 it goes to a screen where it shows my hard drive and dvd-rom , and ask me to hit a ket to continue , when i do i successfully boot into windows , when  i goto bios and into boot sequence none of my devices are there , any ideas? the only way to load to windows is if i keep hitting f1. Sorry if this sound a newbie question , but my last pc was all ide and i know nothing about SATA. also i added a memory card reader in to the floppy drive space , when i look at my drives my only hard drive has the letter H , and one of my memory card slots has the drive letter C ?????
    Regards
    Lennon

    sounds like you have a windows that was installed for previous system. You just plugged it in and hope everything work just fine. Right?
    On this P965 Neo board, the PATA controller is off to JMicron external controller. So for sure, you need to install the proper driver for this controller. Check on the sticky links on top of this forum table. Get the latest driver and installation instruction there.
    Also, make sure your SATA HDD is pluged to the correct port. Which port you're using?
    In the BIOS, what did you set for the SATA and PATA? Everything has to be setup properly, refer to your motherboard manual on those settings.

  • HT3149 How do I export my iphoto album in the same order that it appears onto a flash drive or dvd?

    How do I export one of my albums in iphoto in the same order that it appears onto a flash drive or dvd?

    Remember that the FInder does not have the same sorting options that iPhoto has - no manual sorting for instance. So
    File -> Export and in the resulting dialogue note the options for Naming Files
    Album Name with Number will give you what you want.

  • Driver for DVD ROM SD-R1312 Need Help

    After moving to another apartment, I've lost my CD Toshiba DVD Driver. Without it I cannot use my DVD anymore. Plz help me. I've searched through the Net and in Toshiba Download Center, but I can't find it.
    DVD ROM SD-R1312
    Driver can send to:
    [email protected]
    Thank you very much

    Hi,
    which Notebook do you own and which system is used?
    Normally you don't need an extra DVD driver except DVD RAM is used!
    Is there occured any failure with the DVD? Why can't you use it anymore?
    Please write down some further informations!
    Bye TOK

Maybe you are looking for

  • TS3672 All of a sudden my iPhone is showing #s instead of names on all of my text messages. How do I change it back?

    How do I change this back to showing the names instead of the phone numbers?

  • Flex data Access

    hi i am working in flex and java. i have used blazeds in my flex project i have retrieve the data from mysql in flex project. i have retrieve the records using flex datagrid. but i want retrive the records using textinput. how can i do?? any body hel

  • Windows does not recognise an iPod

    My 5G Nano suddenly stopped being recognised by my PC when I installed iTunes 10.5 yesterday. I reset the iPod and completely removed/reinstalled all Apple software, but Windows 7 can't find a suitable driver. Any suggestions?

  • Can't update or re-install flash player on Mac 10.6.8 safari 5.1.9

    Hi got a message today saying I needed to install latest edition of flash player when I went to check something on youtube it said something about "player being blocked" I downloaded the version 11.7.7.700.169 but only installed 95% an got jammed I t

  • Camcorder Volume

    Is there a way to increase the audio volume when taking video.  We had a quiet room, chose scene "Subject" but you can barely hear the video on playback.  I don't see a setting to increase the audio volume for the microphone ...  I asked at my local