S205 Shared Memory Settings
Hello,
I have lenovo S205 with 3GB RAM
Now size of shared memory is 384MB
How can I change it to 512MB?
I did not find any options in BIOS
Thank you
Hi,
even the one year old Thinkpad X100e could be upgraded to 8 GB ..
the Thinkpad X120e use the same based on cpu/apu platform ... could be upgraded to 8 GB. & X120e use 384MB shared video...
so the equivalent Ideapad S205 uses also 384MB shared video ...
and upgrade to max. 8 GB is no problem , with 2 x 4 GB mem sticks ..
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1
Similar Messages
-
Shared Memory Settings for Oracle - Machine Spec Specific?
Hi,
I've been asked to apply some shared memory settings for Oracle on a new V210. The DBA has asked that we simply copy the settings from one system file to the new machine.
My problem is that I'm not entirely sure whether this is the best course of action. The machine the settings are taken from is a E280R with 2GB Memory and 2 x 900Mhz processors. The new V210 has 2GB and 2 x 1.33Ghz.
Surely the memory settings should be different? Don't worry, I've copied the relevant settings - not the whole system file!
Thanks for any advice,
JohnHi John,
Normally, When you want to apply the shm. We normally for production machines , consider 1/3rd of your physical memory. For eg. If you have 16gb of physical memory, I would consider around 4gb of shm_max.
Thanks,
Keshav .N -
Shared memory settings from 32 to 64 bit Oracle
Hello,
Questions about Oracle and Shared Memory from 32bit to 64bit Oracle
I have a Sun Sparc V880 server running Solaris 9 with 8xCPUs and 16gb of Ram. It is currently running 6 Oracle (32 bit) 9.2 databases which we are planning to upgrade to 10.2. My question regards the setting of the Solaris 9 kernel parameters speciifically 'shminfo_shmmax'. This is currently set to - 'shmsys:shminfo_shmmax=4294967295'which I believe is the maximum amount of shared memory which can be allocated to a 32bit version of Oracle and the one recommended by Oracle.
Running 'show sga' on all of the current 9.2 databases returns
Total System Global Area
DB SGA(bytes)
db1 772528008
db2 789305244
db3 772528008
db4 114021228
db5 791238556
db6 789305244
Total = 4045703524 bytes or 3.76786 gb.
1. Does this mean that each Oracle 32bit database can only use up to a maximum of about 4gb of shared memory or that all 6 together can only use up to 4gb ? resulting in 12gb being available for other (non Oracle) processes.
2. I have noticed (through 'sar' stats) that the server occasionally pages (non zero values for pgscan/s and pgfree/s etc.). Since the server mostly only runs the Oracle databases, is this because Oracle can only use circa 4gb of Ram before it starts paging ?
3. If both 9.2 and 10.2 Oracle databases are run on the server would increasing the value of shminfo_shmmax then allow the 10.2 databases to use more of the 16gb of Ram, while still limiting the 32bit databases to the 4gb limit ?
Any help here would be appreciatedPl see if MOS Doc 467960.1 (How Important It Is To Set shmsys:shminfo_shmmax Above 4 GB) and the notes it references can help
HTH
Srini -
Oracle Error 'ORA-27102: out of memory' - Shared memory parameters correct.
Advice please!
We’ve recently shut down our Oracle test server in order to increase file system capacity. When we rebooted some of the databases wouldn’t start up. It started the first 4 instances and then errored out saying “ORA-27102: out of memory“.
I’m pretty sure it’s nothing to do with the file system because we actually reverted back to the old file system and the databases still wouldn’t start. I think it’s more likely that something’s gone awry whilst the databases were actually running, and the problem has only manifested itself once we stopped and restarted them.
I have researched the error and forud this artical and similar: http://var-adm.blogspot.co.uk/2013/04/adjust-solaris-10-shared-memory-to.html
Everything suggests that Oracle is trying to create a larger shared memory segment than is allowed. The thing is, we’ve never changed our shared memory settings, and one minute it was working, the next it isn’t. To confirm this I checked the shared memory, which is as follows:
sswift4# prctl -n project.max-shm-memory $$
process: 926: bash
NAME PRIVILEGE VALUE FLAG ACTION RECIPIENT
project.max-shm-memory
privileged 7.64GB - deny -
system 16.0EB max deny -
As suggested in the above article, I checked the alert log and found the ‘WARNING: EINVAL’ message which is as follows:
WARNING: EINVAL creating segment of size 0x000000005e002000
Converting this to decimal, it’s trying to create something of 1.5 GB, well within the shared memory settings, which suggests that this isn’t the problem.
We are running Oracle 10g and 11g on Solaris 10 Sparc. The error does not seem to be instance specific, we have 8 instances on this box all with SGA max of 2000m. The server has 32GB of memory available.
Any advice would be helpful.
Thanks in advance.
DebsThanks for your quick responses - we have now resolved the issue.
The shared memory value was set on the command line but not saved.
Therefore once we rebooted it lost the configuration. this has been altered by our UNIX admin and all DBs have started without issue.
Thanks
Debs -
Disp+work stop because of shared memory?
Hello Gurus, I have an SAP server that will not start. It was running previously, but after a parameter update and an instance restart, I cannot get the dispatcher running.
System is Windows 2012 Server, MSSQL 2008 R2, 16 Core 132 GB RAM.
I believe it is related to shared memory overlapping somehow, but I am not sure how to resolve or investigate. I have had issues previously with memory overlap halting SAP servers with Diagnostics Agents, but this server is not currently running any DAA. It is running SAPRouter and some SAP Web Dispatcher instances.
I will include my trace files below:
Please help!
DEV_W0:
trc file: "dev_w0", trc level: 1, release: "721"
* ACTIVE TRACE LEVEL 1
* ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid PRD
M systemid 562 (PC with Windows NT)
M relno 7210
M patchlevel 0
M patchno 100
M intno 20020600
M make multithreaded, Unicode, 64 bit, optimized
M profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
M pid 7668
M
M kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
M length of sys_adm_ext is 588 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workp. 0 7668) [dpxxdisp.c 1376]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpIPCInit2: read dp-profile-values from sys_adm_ext
M DpShMCreate: sizeof(wp_adm) 42864 (2256)
M DpShMCreate: sizeof(tm_adm) 5517056 (27448)
M DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
M DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
M DpShMCreate: sizeof(comm_adm) 1384080 (2744)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (296)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (80)
M DpShMCreate: sizeof(vmc_adm) 0 (2160)
M DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: sizeof(j2ee_adm) 3952
M DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000000200050, size: 7174832)
M DpShMCreate: allocated sys_adm at 0000000000200060
M DpShMCreate: allocated wp_adm_list at 00000000002030B0
M DpShMCreate: allocated wp_adm at 00000000002032A0
M DpShMCreate: allocated tm_adm_list at 000000000020DA20
M DpShMCreate: allocated tm_adm at 000000000020DA70
M DpShMCreate: allocated wp_ca_adm at 0000000000750980
M DpShMCreate: allocated appc_ca_adm at 0000000000760390
M DpShMCreate: allocated comm_adm at 000000000076FDA0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 00000000008C1C40
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated gw_adm at 00000000008C1CF0
M DpShMCreate: allocated j2ee_adm at 00000000008C1D30
M DpShMCreate: allocated ca_info at 00000000008C2CB0
M DpShMCreate: allocated wall_adm at 00000000008C2D40
M DpCommAttachTable: attached comm table (header=000000000076FDA0/ft=000000000076FDB0)
M DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
M rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X <ES> EsILock: use spinlock for locking
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
M
M Fri May 16 01:23:14 2014
M ThStart: taskhandler started
M ThInit: initializing DIA work process W0
M
M Fri May 16 01:23:15 2014
M ThInit: running on host SAPERP
M
M Fri May 16 01:23:16 2014
M calling db_connect ...
B Loading DB library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' ...
B Library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' loaded
B Version of 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll' is "721.02", patchlevel (0.44)
C Callback functions for dynamic profile parameter registered
C Thread ID:4168
C Thank You for using the SLODBC-interface
C Using dynamic link library 'E:\usr\sap\PRD\DVEBMGS00\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C SAP patchlevel 0
C SAP patchno 100
C Last MSSQL DBSL patchlevel 0
C Last MSSQL DBSL patchno 44
C Last MSSQL DBSL patchcomment DBSL support for Microsoft ODBC Driver 11 for SQL Server (1816426)
C ODBC Driver chosen: SQL Server Native Client 11.0 native
C lpc:(local) connection used on SAPERP
C lpc:(local) connection used on SAPERP
C Driver: sqlncli11.dll Driver release: 11.00.3000
C GetDbRelease: 11.00.3339.00
C GetDbRelease: Got DB release numbers (11,0,3339,0)
B Connection 0 opened (DBSL handle 0)
M ThInit: db_connect o.k.
M ICT: exclude compression: *.zip,*.rar,*.arj,*.z,*.gz,*.tar,*.lzh,*.cab,*.hqx,*.ace,*.jar,*.ear,*.war,*.css,*.pdf,*.gzip,*.uue,*.bz2,*.iso,*.sda,*.sar,*.gif,*.png,*.swc,*.swf
I
I Fri May 16 01:23:17 2014
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0000000018030050, size: 4400000)
M SHM_ROLL_AREA (addr: 000007FFDDAB0050, size: 268435456)
M SHM_PAGING_AREA (addr: 0000000018470050, size: 134217728)
M SHM_ROLL_ADM (addr: 0000000020480050, size: 2767448)
M SHM_PAGING_ADM (addr: 0000000020730050, size: 787488)
M ThCreateNoBuffer allocated 548152 bytes for 1000 entries at 0000000020800050
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 31056 bytes (50 server) at 0000000000910050
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
B
B Fri May 16 01:23:18 2014
B db_con_shm_ini: WP_ID = 0, WP_CNT = 19, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 0000000027280160, size: 90000000, end: 000000002C854BE0)
B dbtbxbuf: Buffer TABLP (addr: 000000002C860160, size: 20480000, end: 000000002DBE8160)
B dbsync[db_syinit]: successfully attached to shared memory, sync_adm_p = 0000000011BE0050
B dbsync[db_syinit]: Buffer synchronisation started with
B sync_concept = SEQ_NR
B sendon = 1
B bufreftime = 120
B max_gap_wait_time = 60
B ddlog_del_time = 60
B last_counter = 702514
B oldest_gap = (2147483647,00000000000000)
B time_of_last_sync = 20140516012317
B MySysId = 'SAPERP 00'
B dbexpbuf[EXP_SHB]: buffer EIBUF installed with
B semkey = 35
B shmkey = 54
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_SHM]: buffer ESM installed with
B semkey = 56
B shmkey = 65
B wp_n = 19
B sclass = 0
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 16384
B free_vec_lg = 65
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_CUA]: buffer CUA installed with
B semkey = 30
B shmkey = 47
B wp_n = 19
B sclass = 10
B block_length = 512
B max_objects = 1500
B max_obj_size = 626016
B pref_obj_size = 0
B est_large_obj_size = 98304
B free_vec_lg = 193
B hash_vec_size = 3001
B buffer_l = 3072000
B max_blocks = 4892
B free_blocks = 4892
B mutex_n = 3001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
B dbexpbuf[EXP_OTR]: buffer OTR installed with
B semkey = 55
B shmkey = 64
B wp_n = 19
B sclass = 13
B block_length = 256
B max_objects = 2000
B max_obj_size = 859872
B pref_obj_size = 0
B est_large_obj_size = 20480
B free_vec_lg = 81
B hash_vec_size = 4001
B buffer_l = 4194304
B max_blocks = 13438
B free_blocks = 13438
B mutex_n = 4001
B max_mtx_wait_time = 17000
B recovery_delay = 500000
B tracing = 0
B force_checks = 0
B protect_shm = 0
I MPI: dynamic quotas disabled.
I MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
M rdisp/thwpsf_critical_path : -1 -> 0
M CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
M CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
G RelWritePermissionForShm( pLocation = 120, pEnforce = 0 )
G GetWritePermissionForShm( pLocation = 99, pEnforce = 1 )
G RelWritePermissionForShm( pLocation = 100, pEnforce = 1 )
S *** init spool environment
S TSPEVJOB updates outside critical section: event_update_nocsec = 1
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0000000034052380
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 00000000382B00D0
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 00000000382B06A0
S using messages for server info
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2512 bytes
S immediate print option for implicitely closed spool requests is disabled
A ***GENER* Trace switched on ***
A
A ---PXA-------------------------------------------
A PXA INITIALIZATION
A PXA: Locked PXA-Semaphore.
A System page size: 4kb, total admin_size: 23104kb, dir_size: 22312kb.
A Attached to PXA (address 000007FFEDAE0050, size 300000K, 1 fragments of 276896K )
A PXA allocated (address 000007FFEDAE0050, size 300000K)
A abap/pxa = shared protect gen_remote
A PXA: checking structure sizes: 752|272|16
A PXA INITIALIZATION FINISHED
A ---PXA-------------------------------------------
A
A ATRA: pfclock execution time = 0
A abap/force_local_update_task=0
A ABAP ShmAdm attached (addr=000007DFDF142000 leng=20955136 end=000007DFE053E000)
A >> Shm MMADM area (addr=000007DFDF639B80 leng=242240 end=000007DFDF674DC0)
A >> Shm MMDAT area (addr=000007DFDF675000 leng=15503360 end=000007DFE053E000)
A RFC Destination> destination SAPERP_PRD_00 host SAPERP system PRD systnr 0 (SAPERP_PRD_00)
A RFC Options> H=SAPERP,S=00,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
H HTTP> Parameter icf/ssocookie_mandatory set to 0
B dbtran INFO (init_connection '<DEFAULT>' [MSSQL:721.02]):
B max_blocking_factor = 50, min_blocking_factor = 5,
B max_in_blocking_factor = 255, min_in_blocking_factor = 10,
B max_union_blocking_factor = 50, min_union_blocking_factor = 5,
B prefer_union_all = 1, prefer_join = 1,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 0,
B convert AVG = 1, alias table FUPD = 0,
B escape_as_literal = 0,
B select * =0x00, character encoding = STD / []:X,
B use_hints = abap->1, dbif->0x1, upto->0
M ThrCreateShObjects allocated 39514 bytes at 0000000011C00050
Y dyWpInit
Y ztta/dynpro_ara 800000
Y ztta/cua_ara 500000
Y ztta/diag_ara 250000
N SsfSapSecin: getenv(SECUDIR)=="E:\usr\sap\PRD\DVEBMGS00/sec"
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF library is E:\usr\sap\PRD\DVEBMGS00\exe\sapcrypto.dll .
N ===...SSF default hash algorithm is SHA1 .
N ===...SSF default symmetric encryption algorithm is DES-CBC .
N ===...SECUDIR="E:\usr\sap\PRD\DVEBMGS00/sec"
N ===...loading of Security Toolkit successfully completed.
N === SAPCRYPTOLIB 5.5.5C pl32 (Apr 2 2011) MT-safe
N =================================================
N
N Fri May 16 01:23:20 2014
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 721, [7210.0.100.20020600]
W ITS Plugin: Int.version, [34]
W ITS Plugin: Feature set: [31]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
N SignInit: successfully obtained handle for Security Context cache
N SPNegoInit: SPNego disabled ("spnego/enable" not set to 1)
N VSI: WP init in ABAP VM completed with rc=0
E EnqLockTableSizeCalculate: session quota = 100%
E EnqLockTableAttach2: attach to lock table (size = 33554432)
E EnqLockTableMapToLocalContext: enque/use_pfclock2 = FALSE
E EnqId_Initialize: local EnqId initialization o.k.
M
M Fri May 16 01:23:40 2014
M *** ERROR => ThPlgConnectToIcm: IcmReadAck failed (-8, ni_rc=-6) [thxxplg.c 5172]
M in_ThErrHandle: 1
M *** ERROR => ThStart: connect to icman (step 1, th_errno 2, action 3, level 1) [thxxhead.c 11348]
M
M Info for wp 0
M
M pid = 7668
M severity = 0
M status = 0
M stat = WP_NEW
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M req.req_info =
M req.tid = -1
M req.uid = 4294967295
M req.mode = 255
M req.len = 0
M req.rq_id = 65535
M req.rq_source =
M last_tid = 0
M last_uid = 0
M last_mode = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M ThIErrHandle: current request:
M
M -IN-- sender_id ? tid -1 wp_ca_blk -1 wp_id -1
M -IN-- action - uid -1 appc_ca_blk -1 type -
M -IN-- new_stat NO_CHANGE mode 255 len 0 rq_id -1
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >TrThHookFunc< for event BEFORE_DUMP
M TrThHookFunc: called for WP dump
M ThCallHooks: hook >TrThHookFunc< o.k.
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M ThrSaveSPAFields: save spa fields
M ThrSaveSPAFields: not an update task, no update info saved
M ThrSaveSPAFields: not a batch task, field zttabtckey not saved
M ThCallHooks: hook >ThrSaveSPAFields< o.k.
M ThCallHooks: call hook >ThrBtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: hook >ThrBtcCallLgCl< o.k.
M ThIErrHandle: entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workp. 0 7668) [dpnttool.c 339]
DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 100
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 4924
kernel runs with dp version 137000(ext=119000) (@(#) DPLIB-INT-VERSION-137000-UC)
length of sys_adm_ext is 588 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 4924) [dpxxdisp.c 1314]
shared lib "dw_xml.dll" version 100 successfully loaded
shared lib "dw_xtc.dll" version 100 successfully loaded
shared lib "dw_stl.dll" version 100 successfully loaded
shared lib "dw_gui.dll" version 100 successfully loaded
shared lib "dw_mdm.dll" version 100 successfully loaded
shared lib "dw_rndrt.dll" version 100 successfully loaded
shared lib "dw_abp.dll" version 100 successfully loaded
shared lib "dw_sym.dll" version 100 successfully loaded
shared lib "dw_aci.dll" version 100 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
rdisp/dynamic_wp_check : 1
rdisp/calculateLoadAverage : 1
Fri May 16 01:23:12 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 6438]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: write dp-profile-values into sys_adm_ext
DpIPCInit2: start server >SAPERP_PRD_00 <
DpShMCreate: sizeof(wp_adm) 42864 (2256)
DpShMCreate: sizeof(tm_adm) 5517056 (27448)
DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
DpShMCreate: sizeof(comm_adm) 1384080 (2744)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (296)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (80)
DpShMCreate: sizeof(vmc_adm) 0 (2160)
DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: sizeof(j2ee_adm) 3952
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000005460050, size: 7174832)
DpShMCreate: allocated sys_adm at 0000000005460060
DpShMCreate: allocated wp_adm_list at 00000000054630B0
DpShMCreate: allocated wp_adm at 00000000054632A0
DpShMCreate: allocated tm_adm_list at 000000000546DA20
DpShMCreate: allocated tm_adm at 000000000546DA70
DpShMCreate: allocated wp_ca_adm at 00000000059B0980
DpShMCreate: allocated appc_ca_adm at 00000000059C0390
DpShMCreate: allocated comm_adm at 00000000059CFDA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0000000005B21C40
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated gw_adm at 0000000005B21CF0
DpShMCreate: allocated j2ee_adm at 0000000005B21D30
DpShMCreate: allocated ca_info at 0000000005B22CB0
DpShMCreate: allocated wall_adm at 0000000005B22D40
DpCommAttachTable: attached comm table (header=00000000059CFDA0/ft=00000000059CFDB0)
DpSysAdmIntInit: initialize sys_adm
rdisp/test_roll : roll strategy is DP_NORMAL_ROLL
dia token check not active (10 token)
MBUF state OFF
DpCommInitTable: init table for 500 entries
DpRqQInit: keep protect_queue / slots_per_queue 0 / 2001 in sys_adm
Fri May 16 01:23:13 2014
rdisp/queue_size_check_value : -> on,50,30,40,500,50,500,80
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> EsILock: use spinlock for locking
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 134981MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 134984MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 33745 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
DpVmcSetActive: set vmc state DP_VMC_NOT_ACTIVE
MPI: dynamic quotas disabled.
MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 4.0.1 4.0.1 5.1) [dpxxdisp.c 1700]
Fri May 16 01:23:40 2014
***LOG Q0K=> DpMsAttach, mscon ( SAPERP) [dpxxdisp.c 12667]
MBUF state LOADING
DpStartStopMsg: send start message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: start msg sent
CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1296]
MBUF state ACTIVE
DpWpBlksLow: max wp blocks in queue is 800 (80 %)
MBUF component UP
DpMsgProcess: 1 server in MBUF
DpAppcBlksLow: max appc blocks in queue is 500 (50 %)
*** ERROR => DpIcmMsgProcess: IcmRecMsg (rc=-8,-6) [dpxxdisp.c 19121]
Fri May 16 01:24:20 2014
*** ERROR => DpHdlDeadWp: W0 (pid 7668) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W1 (pid 7456) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W2 (pid 8096) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W3 (pid 4376) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W4 (pid 3000) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W5 (pid 3520) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W6 (pid 7024) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W7 (pid 6172) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W8 (pid 6576) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W9 (pid 7756) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W10 (pid 624) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W11 (pid 7468) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W12 (pid 1176) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W13 (pid 6812) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W14 (pid 6968) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W15 (pid 5036) died (severity=0, status=0) [dpxxwp.c 1729]
*** ERROR => DpHdlDeadWp: W16 (pid 5576) died (severity=0, status=0) [dpxxwp.c 1729]
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:30 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri May 16 07:24:30 2014
========================
No Type Pid Status Cause Start Rstr Err Sem Time Program Cl User Action Table
0 DIA -1 Ended no no 1 0 0 NO_ACTION
1 DIA -1 Ended no no 1 0 0 NO_ACTION
2 DIA -1 Ended no no 1 0 0 NO_ACTION
3 DIA -1 Ended no no 1 0 0 NO_ACTION
4 DIA -1 Ended no no 1 0 0 NO_ACTION
5 DIA -1 Ended no no 1 0 0 NO_ACTION
6 DIA -1 Ended no no 1 0 0 NO_ACTION
7 DIA -1 Ended no no 1 0 0 NO_ACTION
8 DIA -1 Ended no no 1 0 0 NO_ACTION
9 DIA -1 Ended no no 1 0 0 NO_ACTION
10 UPD -1 Ended no no 1 0 0 NO_ACTION
11 ENQ -1 Ended no no 1 0 0 NO_ACTION
12 BTC -1 Ended no no 1 0 0 NO_ACTION
13 BTC -1 Ended no no 1 0 0 NO_ACTION
14 BTC -1 Ended no no 1 0 0 NO_ACTION
15 SPO -1 Ended no no 1 0 0 NO_ACTION
16 UP2 -1 Ended no no 1 0 0 NO_ACTION
Dispatcher Queue Statistics Fri May 16 07:24:30 2014
===========================
+------+--------+--------+--------+------------+------------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+------------+------------+
| NOWP | 1 | 33 | 2000 | 43 | 42 |
+------+--------+--------+--------+------------+------------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+------------+------------+
| UPD | 1 | 1 | 2000 | 1 | 0 |
+------+--------+--------+--------+------------+------------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+------------+------------+
max_rq_id 40
wake_evt_udp_now 0
wake events total 40, udp 5 ( 12%), shm 35 ( 87%)
since last update total 40, udp 5 ( 12%), shm 35 ( 87%)
DpGetLoadAverage: la1[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[1] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[1] = 0.055556 / -1.000000 %
Dispatcher Load Statistics
+------+---------+---------+---------+
| Typ | LA1 | LA5 | LA15 |
+------+---------+---------+---------+
| DIA | 0.000 | 0.000 | 0.056 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[2] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[2] = 0.011111 / -1.000000 %
| UPD | 0.000 | 0.000 | 0.011 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[3] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[3] = 0.000000 / -1.000000 %
| ENQ | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[4] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[4] = 0.000000 / -1.000000 %
| BTC | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[5] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[5] = 0.000000 / -1.000000 %
| SPO | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
DpGetLoadAverage: la1[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la5[6] = 0.000000 / -1.000000 %
DpGetLoadAverage: la15[6] = 0.000000 / -1.000000 %
| UP2 | 0.000 | 0.000 | 0.000 |
+------+---------+---------+---------+
Dump of tm_adm structure: Fri May 16 07:24:30 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T19, U20, , , 01:23:40, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Fri May 16 07:24:30 2014
=============================
Slots: 1000, Used: 2, Max: 46
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | 0xdeadbeef |
| 546 | DISPATCHER | -1 | 0xdeadbeef |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:35 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPERP_PRD_00 < (normal)
DpJ2eeDisableRestart
DpMBufRead: read server list from MBUF (1 entries)
DpMBufMod: name [SAPERP_PRD_00 ], types 191 state 3 (0x0 0x0 0x0 0x0)
DpMBufMod: call hooks for event MBUF_DPEVT_DSTATE (5->3)
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 2/800/1000
DpLockWpBlkEx: lock wp ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqIPutIntoQ: put elem in queue DIA, elems=6
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 41)
MBUF server state SHUTDOWN
DpModState: change state STARTING -> SHUTDOWN
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
DpHalt: switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
DpHalt: stop work processes
DpHalt: stop gateway
killing process (7752) (SOFT_KILL)
DpHalt: stop icman
killing process (5940) (SOFT_KILL)
DpHalt: terminate gui connections
send SHUTDOWN to REM TM 19
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
return errno (-17) to T19
DpTmSend: errormsg without overhead: use mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
DpTmSend: try to send 14 bytes to T19/M0
NiBufSend starting
NiIWrite: hdl 25 sent data (wrt=14,pac=1,MESG_IO)
REL WP ca_blk 2
set status of T19 to TM_DISCONNECTED
NiBufISelUpdate: new MODE -- (r-) for hdl 25 in set0
SiSelNSet: set events of sock 1440 to: ---
NiBufISelRemove: remove hdl 25 from set0
SiSelNRemove: removed sock 1440 (pos=3)
SiSelNRemove: removed sock 1440
NiSelIRemove: removed hdl 25
DpDelSocketInfo: del info for nihdl 25 (pos/type=3/3)
NiICloseHandle: shutdown and close hdl 25/sock 1440
NiBufIClose: clear extension for hdl 25
dp_tm_adm[19].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1400225080/234000
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 19
DpListRemove: remove elem 19 from tmadm_inuse_list
DpListRemove: 19 elems in tmadm_inuse_list
DpListInsert: insert elem 19 into tmadm_free_list (at begin)
DpListInsert: 182 elems in tmadm_free_list
DpHalt: wait for end of work processes
DpHalt: wait for end of gateway
[DpProcDied] Process lives (PID:7752 HANDLE:1300)
DpHalt: waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:36 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:7752 HANDLE:1300 rc:0x0) [dpnttool2.c 147]
DpHalt: wait for end of icman
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:37 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:38 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:39 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:40 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:41 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:42 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:43 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:5940 HANDLE:1296)
DpHalt: waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1445
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri May 16 01:24:44 2014
NiISelect: TIMEOUT occured (1000ms)
*** ERROR => [DpProcDied] Process died (PID:5940 HANDLE:1296 rc:0x0) [dpnttool2.c 147]
DpStartStopMsg: send stop message (myname is >SAPERP_PRD_00 <)
DpStartStopMsg: Write AD_STARTSTOP message with type= 0, name=SAPERP_PRD_00 , sapsysnr= 0, hostname=SAPERP
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 4
AdCallRegisteredCvtToExt: opcode 4 call 000007F7B2BB1470
AdCallRegisteredCvtToExt: opcode 4 exit rc=SAP_O_K
DpConvertRequest: net size = 189 bytes
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
MsISnd2: send msg (ms hdr/msg 110/452 bytes) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 274 bytes
MsIReceive: received msg (ms hdr/msg 110/164 bytes), flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIRead: read for hdl 17 timed out (0ms)
DpHalt: more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
MsISnd2: send msg (ms hdr/msg 110/4 bytes) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiBufIAlloc: malloc MSLIB-BUF, to 32110 bytes
NiIRead: hdl 17 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 17 (r)
NiBufIAlloc: malloc NIBUF-IN, to 32110 bytes
NiIRead: hdl 17 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 17
NiBufReceive starting
MsINiRead: received 114 bytes
MsIReceive: received msg (ms hdr/msg 110/4 bytes), flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsISendKeepalive : keepalive sent to message server
NiIRead: hdl 17 recv would block (errno=EAGAIN)
Fri May 16 01:24:45 2014
NiIPeek: peek for hdl 17 timed out (r; 1000ms)
NiIRead: read for hdl 17 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
DpHalt: detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 13064]
NiBufSend starting
NiIWrite: hdl 17 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server (SAPERP / 3900)
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 17 in set0
SiSelNSet: set events of sock 1400 to: ---
NiBufISelRemove: remove hdl 17 from set0
SiSelNRemove: removed sock 1400 (pos=2)
SiSelNRemove: removed sock 1400
NiSelIRemove: removed hdl 17
DpDelSocketInfo: del info for nihdl 17 (pos/type=2/4)
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 60
AdCallRegisteredCvtToExt: opcode 60 call 000007F7B2B8B6E0
AdCallRegisteredCvtToExt: opcode 60 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCallRegisteredCvtToExt: opcode 40
AdCallRegisteredCvtToExt: opcode 40 call 000007F7B3297650
AdCallRegisteredCvtToExt: opcode 40 exit rc=SAP_O_K
DpWpBlksLow: wp_blks_in_queue/limit/max = 3/800/1000
DpLockWpBlkEx: lock wp ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqIPutIntoQ: put elem in queue DIA, elems=7
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 44)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 17/sock 1400
NiBufIClose: clear extension for hdl 17
MsIDetach: detach MS-system (SAPERP / 3900)
DpHalt: cleanup EM
EsCleanup( )
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 4924) [dpxxdisp.c 11574]
DpHalt: Good Bye .....
SAPSTARTSRV
trc file: "sapstartsrv.log", trc level: 0, release: "721"
pid 6196
[Thr 6528] Fri May 16 00:38:09 2014
SAP HA Trace: SAP Microsoft Cluster library '721, patch 100, changelist 1397439' initialized
CCMS agent initialization for instance type ABAP: return code 0.
CCMS agent start: return code 0.
Initializing SAPControl Webservice
Starting AutoRestart thread
AutoRestart thread started, version check is enabled
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port \\.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
\sapadmin is starting SAP System at 2014/05/16 0:38:18
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 0:49:10
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is starting SAP System at 2014/05/16 0:50:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\sapadmin is stopping SAP System at 2014/05/16 1:21:22
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]
\prdadm is starting SAP System at 2014/05/16 1:23:04
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 213]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 920]Hi Alwina, here is the DEV_ICM trace:
From this trace, it appears that it is listening to 65000?
Netstat shows that the system is listening to 127.0.0.1:65000 .
Other SAP ports show listening on 0:0:0:0:xxxx , is ICM listening on 127 a problem?
trc file: "dev_icm", trc level: 1, release: "721"
sysno 00
sid PRD
systemid 562 (PC with Windows NT)
relno 7210
patchlevel 0
patchno 43
intno 20020600
make multithreaded, Unicode, 64 bit, optimized
profile \\SAPERP\sapmnt\PRD\SYS\profile\PRD_DVEBMGS00_SAPERP
pid 5940
[Thr 1812] Fri May 16 01:23:13 2014
[Thr 1812] Parameter system/type has value: "ABAP"
[Thr 1812] started security log to file ./dev_icm_sec
[Thr 1812] ICM running on:
[Thr 1812] MtxInit: 30001 0 2
[Thr 1812] ***LOG IM1=> IcmInit, Startup (ICM&SAPERP.CORP.CANSEL.CA&5940&) [icxxman.c 1934]
[Thr 1812] IcmInit: listening to admin port: 65000
[Thr 1812] DpSysAdmExtCreate: ABAP is active
[Thr 1812] DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
[Thr 1812] DpIPCInit2: read dp-profile-values from sys_adm_ext
[Thr 1812] DpShMCreate: sizeof(wp_adm) 42864 (2256)
[Thr 1812] DpShMCreate: sizeof(tm_adm) 5517056 (27448)
[Thr 1812] DpShMCreate: sizeof(wp_ca_adm) 64000 (64)
[Thr 1812] DpShMCreate: sizeof(appc_ca_adm) 64000 (64)
[Thr 1812] DpCommTableSize: max/headSize/ftSize/tableSize=500/16/1384064/1384080
[Thr 1812] DpShMCreate: sizeof(comm_adm) 1384080 (2744)
[Thr 1812] DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
[Thr 1812] DpShMCreate: sizeof(slock_adm) 0 (296)
[Thr 1812] DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
[Thr 1812] DpShMCreate: sizeof(file_adm) 0 (80)
[Thr 1812] DpShMCreate: sizeof(vmc_adm) 0 (2160)
[Thr 1812] DpShMCreate: sizeof(wall_adm) (41664/42896/64/192)
[Thr 1812] DpShMCreate: sizeof(gw_adm) 48
[Thr 1812] DpShMCreate: sizeof(j2ee_adm) 3952
[Thr 1812] DpShMCreate: SHM_DP_ADM_KEY (addr: 00000000022F0050, size: 7174832)
[Thr 1812] DpShMCreate: allocated sys_adm at 00000000022F0060
[Thr 1812] DpShMCreate: allocated wp_adm_list at 00000000022F30B0
[Thr 1812] DpShMCreate: allocated wp_adm at 00000000022F32A0
[Thr 1812] DpShMCreate: allocated tm_adm_list at 00000000022FDA20
[Thr 1812] DpShMCreate: allocated tm_adm at 00000000022FDA70
[Thr 1812] DpShMCreate: allocated wp_ca_adm at 0000000002840980
[Thr 1812] DpShMCreate: allocated appc_ca_adm at 0000000002850390
[Thr 1812] DpShMCreate: allocated comm_adm at 000000000285FDA0
[Thr 1812] DpShMCreate: system runs without slock table
[Thr 1812] DpShMCreate: system runs without file table
[Thr 1812] DpShMCreate: allocated vmc_adm_list at 00000000029B1C40
[Thr 1812] DpShMCreate: system runs without vmc_adm
[Thr 1812] DpShMCreate: allocated gw_adm at 00000000029B1CF0
[Thr 1812] DpShMCreate: allocated j2ee_adm at 00000000029B1D30
[Thr 1812] DpShMCreate: allocated ca_info at 00000000029B2CB0
[Thr 1812] DpRqQInit: use protect_queue / slots_per_queue 0 / 2001 from sys_adm
[Thr 1812] MPI: dynamic quotas disabled.
[Thr 1812] MPI init: pipes=4000 buffers=1279 reserved=383 quota=10%
[Thr 1812] CCMS: initialize CCMS Monitoring for ABAP instance with J2EE addin.
[Thr 1812] CCMS: SemInMgt: Semaphore Management initialized by AlAttachShm_Doublestack.
[Thr 1812] Fri May 16 01:23:14 2014
[Thr 1812] CCMS: SemInit: Semaphore 38 initialized by AlAttachShm_Doublestack.
[Thr 1812] IcmCreateWorkerThreads: created worker thread 0
[Thr 1812] IcmCreateWorkerThreads: created worker thread 1
[Thr 1812] IcmCreateWorkerThreads: created worker thread 2
[Thr 6912] IcmProxyWatchDog: proxy watchdog started
[Thr 1812] IcmCreateWorkerThreads: created worker thread 3
[Thr 1812] IcmCreateWorkerThreads: created worker thread 4
[Thr 1812] IcmCreateWorkerThreads: created worker thread 5
[Thr 1812] IcmCreateWorkerThreads: created worker thread 6
[Thr 1812] IcmCreateWorkerThreads: created worker thread 7
[Thr 1812] IcmCreateWorkerThreads: created worker thread 8
[Thr 1812] IcmCreateWorkerThreads: created worker thread 9
[Thr 4024] IcmMpiWatchDogThread: MPI watchdog started
[Thr 4400] IcmWatchDogThread: watchdog started
[Thr 6524] HttpISubHandlerAdd: Added handler HttpFileAccessHandler(000000000C2E2750), slot=0, flags=4098) for /sap/public/icmandir/, active: 1, table 000000000C2E24C0
[Thr 6524] ISC: created 400 MB disk cache.
[Thr 6524] ISC: created 50 MB memory cache.
[Thr 6524] HttpISubHandlerAdd: Added handler HttpCacheHandler(000000000C3EB4B0), slot=1, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/icmadmin.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAdminHandler(000000000C461480), slot=2, flags=36869) for /sap/admin, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpModHandler(000000000C461570), slot=3, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] CsiInit(): Initializing the Content Scan Interface
[Thr 6524] PC with Windows NT (mt,unicode,SAP_CHAR/size_t/void* = 16/64/64)
[Thr 6524] CsiInit(): CSA_LIB = "E:\usr\sap\PRD\DVEBMGS00\exe\sapcsa.dll"
[Thr 6524] HttpISubHandlerAdd: Added handler HttpAuthHandler(000000000C4615F0), slot=4, flags=12293) for /, active: 1, table 000000000C2E24C0
[Thr 6524] HttpISubHandlerAdd: Added handler HttpSAPR3Handler(000000000C4AFAE0), slot=5, flags=1052677) for /, active: 1, table 000000000C2E24C0
[Thr 6524] Started service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 6524] Started service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 6524] Fri May 16 01:23:18 2014
[Thr 6524] IcmNetCheck: network check passed without detecting problems
[Thr 4268] Fri May 16 01:23:24 2014
[Thr 4268] HttpExtractArchive: files from archive E:\usr\sap\PRD\DVEBMGS00\exe/ITS.SAR in directory E:/usr/sap/PRD/DVEBMGS00/data/icmandir are up to date
[Thr 8156] Fri May 16 01:24:14 2014
[Thr 8156] *** WARNING => IcmCallAllSchedules: Schedule func 1 already running - avoid recursion [icxxsched.c 481]
[Thr 5948] Fri May 16 01:24:24 2014
[Thr 5948] *** WARNING => IcmJ2EEScheduleFunc: Cannot access "/sap/public/icman" (rc=500)- please check node in TA sicf [icxxman.c 2598]
[Thr 6912] Fri May 16 01:24:44 2014
[Thr 6912] IcmProxyWatchDog: Shutdown request received
[Thr 4400] IcmWatchDogThread: Shutdown request received
[Thr 6912] *** IcmProxyWatchDog: exit thread ***
[Thr 4024] *** IcmMpiWatchDogThread: exit thread ***
[Thr 4400] *** IcmWatchDogThread: exit thread ***
[Thr 1812] IcmLoop: Shutdown request received
[Thr 1812] Deactivated service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Deactivated service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] Removed service PORT=8000,PROT=HTTP,TIMEOUT=60,PROCTIMEOUT=60
[Thr 1812] Removed service PORT=0,PROT=SMTP,TIMEOUT=120,PROCTIMEOUT=120
[Thr 1812] *** ICM shutdown completed (pid: 5940) *** -
ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exi
Hi all,
suddenly our oracle 10g database stopped working. When we tried export the database following was the output
C:\Documents and Settings\Administrator>EXP PMIS/PMIS FILE=C:\PMIS.DMP
Export: Release 10.2.0.1.0 - Production on Wed Mar 25 16:15:08 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
EXP-00056: ORACLE error 1034 encountered
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
EXP-00005: all allowable logon attempts failed
EXP-00000: Export terminated unsuccessfullyalert log file had the output as
Wed Mar 25 16:02:12 2009
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Using LOG_ARCHIVE_DEST_10 parameter default value as USE_DB_RECOVERY_FILE_DEST
Autotune of undo retention is turned on.
IMODE=BR
ILAT =10
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.1.0.
System parameters with non-default values:>sessions = 49
>__shared_pool_size = 71303168
>__large_pool_size = 8388608
>__java_pool_size = 4194304
>__streams_pool_size = 0
>spfile = C:\ORACLEXE\APP\ORACLE\PRODUCT\10.2.0\SERVER\DBS\SPFILEXE.ORA
>sga_target = 146800640
>control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
>__db_cache_size = 58720256
>compatible = 10.2.0.1.0
>db_recovery_file_dest = C:\oraclexe\app\oracle\flash_recovery_area
>db_recovery_file_dest_size= 10737418240
>undo_management = AUTO
>undo_tablespace = UNDO
>remote_login_passwordfile= EXCLUSIVE
>dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
>shared_servers = 4
>job_queue_processes = 4
>audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
>background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
>user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
>core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
>db_name = XE
>open_cursors = 300
>os_authent_prefix =
>pga_aggregate_target = 41943040
PMON started with pid=2, OS id=1632
PSP0 started with pid=3, OS id=1312
MMAN started with pid=4, OS id=200
DBW0 started with pid=5, OS id=1864
LGWR started with pid=6, OS id=188
CKPT started with pid=7, OS id=1328
SMON started with pid=8, OS id=1848
RECO started with pid=9, OS id=1760
CJQ0 started with pid=10, OS id=1920
MMON started with pid=11, OS id=768
MMNL started with pid=12, OS id=948
Wed Mar 25 16:02:13 2009
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
starting up 4 shared server(s) ...
Oracle Data Guard is not available in this edition of Oracle.
Wed Mar 25 16:02:13 2009
alter database mount exclusive
Wed Mar 25 16:02:17 2009
Setting recovery target incarnation to 2
Wed Mar 25 16:02:17 2009
Successful mount of redo thread 1, with mount id 2563569989
Wed Mar 25 16:02:17 2009
Database mounted in Exclusive Mode
Completed: alter database mount exclusive
Wed Mar 25 16:02:17 2009
alter database open
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_lgwr_188.trc:
ORA-00600: internal error code, arguments: [3700], [1], [15], [2], [2], [], [], []
Wed Mar 25 16:02:18 2009
LGWR: terminating instance due to error 470
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_dbw0_1864.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_ckpt_1328.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_psp0_1312.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_mman_200.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_pmon_1632.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_reco_1760.trc:
ORA-00470: LGWR process terminated with error
Wed Mar 25 16:02:19 2009
Errors in file c:\oraclexe\app\oracle\admin\xe\bdump\xe_smon_1848.trc:
ORA-00470: LGWR process terminated with error
Instance terminated by LGWR, pid = 188Again when we tried by connecting sqlplus following was output
SQL> connect sys/manager as sysdba
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 146800640 bytes
Fixed Size 1286220 bytes
Variable Size 83890100 bytes
Database Buffers 58720256 bytes
Redo Buffers 2904064 bytes
Database mounted.
ORA-03113: end-of-file on communication channelWe actually need database dump for user PMIS, any help would be highly appreciatedHi Wim
You should say that "It may be Control File problem", but you shouldn't say that "it's due to Control File" problem
Please refer to Errors Documentation for more information on ORA-00600
http://download.oracle.com/docs/cd/B19306_01/server.102/b14219/e0.htm#sthref371
ORA-00600: internal error code, arguments: [string], [string], [string], [string], [string], [string], [string], [string]
Cause: This is the generic internal error number for Oracle program exceptions. This indicates that a process has encountered an exceptional condition.
Action: Report as a bug - the first argument is the internal error number
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com -
ORA-27101: shared memory realm does not exist
Hi all
I have a problem related to sap xi-7.0 server.
when I start server than dispature is not started . and the trans file show these problem , i am past the this trans file ,
so plz solve this problem,
4 ETW000 R3trans version 6.14 (release 700 - 18.09.06 - 09:35:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.02.2009 - 01:11:50
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: R3trans -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:52 2009 3963 0.003963
4 ETW000 [dev trc ,00000] db_con_init called 710 0.004673
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 188 0.004861
4 ETW000 [dev trc ,00000] Loading DB library 'dboraslib.dll' ... 71 0.004932
4 ETW000 [dev trc ,00000] load shared library (dboraslib.dll), hdl 0 74699 0.079631
4 ETW000 [dev trc ,00000] using "D:\usr\sap\D10\SYS\exe\uc\NTI386\dboraslib.dll"
4 ETW000 75 0.079706
4 ETW000 [dev trc ,00000] Library 'dboraslib.dll' loaded 19 0.079725
4 ETW000 [dev trc ,00000] function DbSlExpFuns loaded from library dboraslib.dll
4 ETW000 22 0.079747
4 ETW000 [dev trc ,00000] Version of 'dboraslib.dll' is "700.08", patchlevel (0.73)
4 ETW000 5493 0.085240
4 ETW000 [dev trc ,00000] function dsql_db_init loaded from library dboraslib.dll
4 ETW000 42 0.085282
4 ETW000 [dev trc ,00000] function dbdd_exp_funs loaded from library dboraslib.dll
4 ETW000 91 0.085373
4 ETW000 [dev trc ,00000] New connection 0 created 59 0.085432
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 32 0.085464
4 ETW000 [dev trc ,00000] db_con_connect (con_name=R/3) 43 0.085507
4 ETW000 [dev trc ,00000] find_con_by_name found the following connection for reuse:
4 ETW000 17 0.085524
4 ETW000 [dev trc ,00000] 0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
4 ETW000 21 0.085545
4 ETW000 [dev trc ,00000] CLIENT_ORACLE_HOME is not set as environment variable or
4 ETW000 DIR_CLIENT_ORAHOME is not set as profile parameter.
4 ETW000 assuming using instant client with unspecified location.
4 ETW000 9668 0.095213
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:54 2009 1849124 1.944337
4 ETW000 [dev trc ,00000] Oracle Client Version: '10.2.0.1.0' 58 1.944395
4 ETW000 [dev trc ,00000] -->oci_initialize (con_hdl=0) 23 1.944418
4 ETW000 [dev trc ,00000] Fri Feb 20 01:11:55 2009 511982 2.456400
4 ETW000 [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8 59 2.456459
4 ETW000 [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password 18 2.456477
4 ETW000 [dev trc ,00000] Connecting as /@D10 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 44 2.456521
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 39103 2.495624
4 ETW000 [dev trc ,00000] 0 UTF8 1 0241DCB8 024231EC 02422A74
4 ETW000 31 2.495655
4 ETW000 [dev trc ,00000] Allocating service context handle for con_hdl=0 31702 2.527357
4 ETW000 [dev trc ,00000] Allocating server context handle 47 2.527404
4 ETW000 [dev trc ,00000] Attaching to DB Server D10 (con_hdl=0,svchp=024229C0,svrhp=02434234)
4 ETW000 230 2.527634
4 ETW000 [dev trc ,00000] Fri Feb 20 01:12:01 2009 5281432 7.809066
4 ETW000 [dev trc ,00000] Assigning server context 02434234 to service context 024229C0
4 ETW000 67 7.809133
4 ETW000 [dev trc ,00000] Allocating user session handle 56 7.809189
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=024229C0,srvhp=02434234,usrhp=0246F9C8)
4 ETW000 2370 7.811559
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 656067 8.467626
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=02434234) 16 8.467642
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=024229C0,srvhp=02434234)
4 ETW000 19 8.467661
4 ETW000 [dev trc ,00000] Deallocating server context handle 02434234 23932 8.491593
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 64 8.491657
4 ETW000 [dev trc ,00000] Try to connect with default password 83 8.491740
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@D10 on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
4 ETW000 21 8.491761
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 21 8.491782
4 ETW000 [dev trc ,00000] 0 UTF8 1 0241DCB8 024231EC 02422A74
4 ETW000 21 8.491803
4 ETW000 [dev trc ,00000] Allocating server context handle 48 8.491851
4 ETW000 [dev trc ,00000] Attaching to DB Server D10 (con_hdl=0,svchp=024229C0,svrhp=02434234)
4 ETW000 35 8.491886
4 ETW000 [dev trc ,00000] Fri Feb 20 01:12:02 2009 458152 8.950038
4 ETW000 [dev trc ,00000] Assigning server context 02434234 to service context 024229C0
4 ETW000 56 8.950094
4 ETW000 [dev trc ,00000] Assigning username to user session 0246F9C8 17 8.950111
4 ETW000 [dev trc ,00000] Assigning password to user session 0246F9C8 35 8.950146
4 ETW000 [dev trc ,00000] Starting user session (con_hdl=0,svchp=024229C0,srvhp=02434234,usrhp=0246F9C8)
4 ETW000 24 8.950170
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCISessionBegin' failed: rc = 1034
4 ETW000 234917 9.185087
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=1,svrhp=02434234) 799 9.185886
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=024229C0,srvhp=02434234)
4 ETW000 42 9.185928
4 ETW000 [dev trc ,00000] Deallocating server context handle 02434234 1364 9.187292
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '1034'
4 ETW000 61 9.187353
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 1034 performing CON [dblink#3 @ 431]
4 ETW000 10170 9.197523
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-01034: ORACLE not available 49 9.197572
4 ETW000 ORA-27101: shared memory realm does not exist [dblink#3 @ 431]
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'D10'"Hello Pankaj,
Try starting Oracle database from SQL plus using orasid as user and then start SAP
Refer to Note 491174 and perform all the tests as mentioned
You will be able to solve it
Let me know if it helps
Rohit -
ORA-27101: shared memory realm does not exist after kernel upgrade
Hi,
I have installed ECC 6.0 on windows 32 bit. After I upgraded the kernel, the database can't be started as well as SAP. When I checked the logs, the error ORA-27101: shared memory realm does not exist was encountered.
M calling db_connect ...
C Prepending E:\usr\sap\ERP\DVEBMGS01\exe to Path.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
C Try to connect with default password
C Connecting as SAPSR3/<pwd>@ERP on connection 0 (nls_hdl 0) ... (dbsl 700 250407)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 06E217E8 06E26D84 06E2660C
C Attaching to DB Server ERP (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C Starting user session (con_hdl=0,svchp=06E26558,srvhp=06E38144,usrhp=06E4CEB8)
C *** ERROR => OCI-call 'OCISessionBegin' failed with rc=1034
[dboci.c 4532]
C Detaching from DB Server (con_hdl=0,svchp=06E26558,srvhp=06E38144)
C *** ERROR => CONNECT failed with sql error '1034'
[dbsloci.c 11042]
B ***LOG BV3=> severe db error 1034 ; work process is stopped [dbsh#2 @ 1199] [dbsh 1199 ]
B ***LOG BY2=> sql error 1034 performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1426]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10283]
M
Please help.
Thanks.
Regards.Hi. First restart the server, then start the LISTENER, and repeat startsap again. Check if messages repeated. Regards.
-
Solaris 10, Oracle 10g, and Shared Memory
Hello everyone,
We've been working on migrating to Solaris 10 on all of our database servers (I'm a UNIX admin, not a DBA, so please be gentle) and we've encountered an odd issue.
Server A:
Sun V890
(8) 1.5Ghz CPUs
32GB of RAM
Server A was installed with Solaris 10 and the Oracle data and application files were moved from the old server (the storage hardware was moved between servers). Everything is running perfectly, and we're using the resource manager to control the memory settings (not /etc/system)
The DBAs then increase the SGA of one of the DBs on the system from 1.5GB to 5GB and it fails to start (ORA-27102). According to the information I have, the maximum shared memory on this system should be 1/4 of RAM (8 GB, actually works out to 7.84 GB according to prctl). I verified the other shared memory/semaphore settings are where they should be, but the DB would not start with a 5 GB SGA. I then decided to just throw a larger max shared memory segment at it, so I used the projmod to increase project.max-shm-memory to 16GB for the project Oracle runs under. The DB now starts just fine. I cut it back down to 10GB for project.max-shm-memory and the DB starts ok. I ran out of downtime window, so I couldn't continue refining the settings.
Running 'ipcs -b' and totalling up the individual segments showed we were using around 5GB on the test DB (assuming my addition is correct).
So, the question:
Is there a way to correlate the SGA of the DB(s) into what I need the project.max-shm-memory to? I would think 7.84GB would be enough to handle a DB with 5GB SGA, but it doesn't appear to be. We have some 'important' servers getting upgraded soon and I'd like to be able to refine these numbers / settings before I get to them.
Thanks for your time,
StevenTo me, setting a massive shared memory segment just seems to be inefficient. I understand that Oracle is only going to take up as much memory (in general) as the SGA. And I've been searching for any record of really large shared memory segments causing issues but haven't found much (I'm going to contact Sun to get their comments).
The issue I am having is that it doesn't make sense that the DB with a 5GB SGA is unable to startup when there is an 8GB max shared memory segment, but a 10GB (and above) seems to work. Does it really need double the size of the SGA when starting up, but 'ipcs' shows it's only using the SGA amount of shared memory? I have plans to cut it down to 4GB and test again, as that is Oracle's recommendation. I also plan to run the DB startup through truss to get a better handle on what it's trying to do. And, if it comes down to it, I'll just set a really big max shared memory segment, I just don't want it to come back and cause an issue down the road.
The current guidance on Metalink still seems to be suggesting a 4GB shared memory segment (I did not get a chance to test this yet with the DB we're having issues with).
I can't comment on how the DBA specifically increased the SGA as I don't know what method they use. -
Shared Memory Short Dump: SHMM ab_ShmResetLocks - anyone?
hello:)
I have a problem with shared memory area (SHMM) that dumps.
I have a tool that uses a shared memory area instance to store data.
When I run the tool and update the data stored in the instance, a short dump is thrown:
SYSTEM_SHM_AREA_OBSOLETE with the explanation:
An attempt was made to access a shared memory area that has already been
released. Possible reasons for release:
- explicit release from an ABAP program or from the shared objects
management transaction
- implicit release during resource shortages
The first one does not match, as I DO NOT explicitly release the instance of my area.
Moreover, ST22 shows me different parts of code every time, so my code is not the cause, or a specific part of code, or data that I shift.
The second one would probably be the cause.
But how can I avoid it?
Moreover, there in SM21(System Log) there is at this time, there is a runtime error, that says
ab_ShmResetLocks and nothing more:(
Shared Memory size is sufficient.
The Shared Memory Area Settings (SHMA) do not time out the read/write access(Lifetime: no entry and Automatic area structuring is set)
Any help is more than welcome, why i get the short dump!!
best regards
simon:)Please check the following SAP notes:
[SAP Note 1105266 WDA: Runtime error SYSTEM_SHM_AREA_OBSOLETE|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_wd/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31313035323636%7d]
Also check the below notes for related details.
Note 1322182 - Memory consumption of ABAP Shared Objects
[SAP Note 764187 SYSTEM_SHM_AREA_DETACHED runtime error|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_aba/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d373634313837%7d]
Please check the size of the shared memory object in the profile parameter abap/shared_objects_size_MB.
Regards,
Dipanjan -
We installed the suite on a linux server in a managed configuration (AdminServer, soa_server1, bam_server1).
At first we didnot change the memory settings so all three process ran with memory settings:
-Xms512m -Xmx1024m -XX:PermSize=128m -XX:MaxPermSize=512m
With these settings the suite ran OK at first but gradually the performance detoriated.
Using jconsole I looked at the memory consumption of the processes and the soa_server1 was using up all memory while the AdminServer and bam_server1 had plenty of memory.
I changed the memory setting specific to the servers:
AdminServer, bam_server1
-Xms768m -Xmx768m -XX:PermSize=128m -XX:MaxPermSize=256m
soa_server1
-Xms1536m -Xmx1536m -XX:PermSize=128m -XX:MaxPermSize=512m
The process have been running stable upto now.
The server:
OS: oracle enterprise server release 4 update 7
Cpu: 4*E7340 @ 2.4 Ghz
Ram: 8 Gb
Any other experiences with memory settings on linux and/or using a single server setup vs the shared configuration?
Gr,
Gert Jan KerstenAbout rebuilding kernel
on linux 7.0 :
1. Try to look at file /usr/src/linux/include/asm/shmparam.h
Update parameters SHMMAX, SHMMIN, SHMMNI, SHMSEG.
SHMMAX is set to 50% of RAM
SHMMIN 1
SHMMNI 100
SHMSEG 10
2. edit file /usr/src/linux/include/linux/sem.h
and set param
SEMMSL 250
SEMOPM 100
SEMVMX 32767
3. After then you must configure kernel, and set modules
and drivers when you need.
>cd /usr/src/linux
>make xconfig
4. Save configure.
5. >cd /usr/src/linux
>make clean
>make dep
>make bzImage
6. Command make bzImage create new kernel in directory
/usr/src/linux/arch/i386/boot
there is file bzImage
7. copy new kernel to /boot directory
8. you must edit /etc/lilo.cfg and add new record for
new kernel.
9. write lilo to disk
>cd /etc
> lilo -c
10. Be shure that you can boot old kernel !!!!!
11. restart.
12. After correct reboot new kernel you can see to the
/proc/sys/kernel/shmmax
there is parameter about max shared memory.
on Linux 7.1
is different file path and name for edit.
/usr/src/linux-2.4/include/linux/sem.h
/usr/src/linux-2.4/include/linux/shm.h
Hi. -
Satellite Pro L850 - i5 3210M shared memory allocation
Hi,
I'm a proud new owner of this excellent laptop and I've added extra RAM to take it to 8GB.
All the spec sheets on retailer websites state that the gpu can be assigned up to 1.7GB of shared memory.
Previous experience of other computers is that this memory amount is altered in the BIOS settings but I do not see any option in latest BIOS 1.60.
Obviously theres' plenty of RAM to give to the GPU but I can't see how to assign it. Do the i5 chips allocate dynamically once Windows is running or is the BIOS missing this setting?
Thanks in advance for any assistance.Hi
The shared memory is controlled by graphic card driver and this cannot be controlled manually if an running applications needs some shared memory, the driver would assign this value automatically. -
Hi,
I am facing "NOT ENOUGH SHARED MEMORY " problem even with 1-2 users in portal 3.0.6.x.
The init.ora settings are:
shared_pool_size=104857600 large_pool_size=614400
java_pool_size=20971520
Is it due to hanging sessions?
How to see the hanging sessions inside database?
Can you tell me what is going wrong?
Thanks
Vikas
nullThink I got it figured out. Oracle 10g XE doesn't
have a DB_HANDLE initialization parameter. The
problem is that the initialization parameters are
located in $ORACLE_HOME/dbs/spfileXE.ora, but sqlplus
is looking for initORCL.ora.You mean instance is looking for initORCL.ora and not for SPFILE, or ;-)
So does anyone besides Faust knowSorry, again me ;-)
how to configure
sqlplus to look for spfileXE.ora instead of
initORCL.ora? I can't find an SQL*Plus setting that
will do this.How to set SPFILE and arond it you can find here:
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/create.htm#i1013934
Cheers! -
836: Cannot create data store shared-memory segment, error 22
Hi,
I am hoping that there is an active TimesTen user community out there who could help with this, or the TimesTen support team who hopefully monitor this forum.
I am currently evaluating TimesTen for a global investment organisation. We currently have a large Datawarehouse, where we utilise summary views and query rewrite, but have isolated some data that we would like to store in memory, and then be able to
report on it through a J2EE website.
We are evaluating TimesTen versus developing our own custom cache. Obviously, we would like to go with a packaged solution but we need to ensure that there are no limits in relation to maximum size. Looking through the documentation, it appears that the
only limit on a 64bit system is the actual physical memory on the box. Sounds good, but we want to prove it since we would like to see how the application scales when we store about 30gb (the limit on our UAT environment is 32gb). The ultimate goal is to
see if we can store about 50-60gb in memory.
Is this correct? Or are there any caveats in relation to this?
We have been able to get our Data Store store 8gb of data, but want to increase this. I am assuming that the following error message is due to us not changing the /etc/system on the box:
836: Cannot create data store shared-memory segment, error 22
703: Subdaemon connect to data store failed with error TT836
Can somebody from the User community, or an Oracle Times Ten support person recommend what should be changed above to fully utilise the 32gb of memory, and the 12 processors on the box.
Its quite a big deal for us to bounce the UAT unix box, so l want to be sure that l have factored in all changes that would ensure the following:
* Existing Oracle Database instances are not adversely impacted
* We are able to create a Data Store which is able fully utilise the physical memory on the box
* We don't need to change these settings for quite some time, and still be able to complete our evaluation
We are currently in discussion with our in-house Oracle team, but need to complete this process before contacting Oracle directly, but help with the above request would help speed this process up.
The current /etc/system settings are below, and l have put in the current machines settings as comments at the end of each line.
Can you please provide the recommended settings to fully utilise the existing 32gb on the box?
Machine
## I have contrasted the minimum prerequisites for TimesTen and then contrasted it with the machine's current settings:
SunOS uatmachinename 5.9 Generic_118558-11 sun4us sparc FJSV,GPUZC-M
FJSV,SPARC64-V
System Configuration: Sun Microsystems sun4us
Memory size: 32768 Megabytes
12 processors
/etc/system
set rlim_fd_max = 1080 # Not set on the machine
set rlim_fd_cur=4096 # Not set on the machine
set rlim_fd_max=4096 # Not set on the machine
set semsys:seminfo_semmni = 20 # machine has 0x42, Decimal = 66
set semsys:seminfo_semmsl = 512 # machine has 0x81, Decimal = 129
set semsys:seminfo_semmns = 10240 # machine has 0x2101, Decimal = 8449
set semsys:seminfo_semmnu = 10240 # machine has 0x2101, Decimal = 8449
set shmsys:shminfo_shmseg=12 # machine has 1024
set shmsys:shminfo_shmmax = 0x20000000 # machine has 8,589,934,590. The hexidecimal translates into 536,870,912
$ /usr/sbin/sysdef | grep -i sem
sys/sparcv9/semsys
sys/semsys
* IPC Semaphores
66 semaphore identifiers (SEMMNI)
8449 semaphores in system (SEMMNS)
8449 undo structures in system (SEMMNU)
129 max semaphores per id (SEMMSL)
100 max operations per semop call (SEMOPM)
1024 max undo entries per process (SEMUME)
32767 semaphore maximum value (SEMVMX)
16384 adjust on exit max value (SEMAEM)Hi,
I work for Oracle in the UK and I manage the TimesTen pre-sales support team for EMEA.
Your main problem here is that the value for shmsys:shminfo_shmmax in /etc/system is currently set to 8 Gb therby limiting the maximum size of a single shared memory segment (and hence Timesten datastore) to 8 Gb. You need to increase this to a suitable value (maybe 32 Gb in your case). While you are doing that it would be advisable to increase ny of the other kernel parameters that are currently lower than recommended up to the recommended values. There is no harm in increasing them other possibly than a tiny increase in kernel resources, but with 32 GB of RAM I don't think you need be concerned about that...
You should also be sure that the system has enough swap space configured to supprt a shared memory segment of this size. I would recommend that you have at least 48 GB of swap configured.
TimesTen should detect that you have a multi-CPU machine and adjust its behaviour accordingly but if you want to be absolutely sure you can set SMPOptLevel=1 in the ODBC settings for the datastore.
If you want more direct assistance with your evaluation going forward then please let me know and I will contact you directly. Of course, you are free to continue using this forum if you would prefer.
Regards, Chris -
XP Pro shared memory size of Intel GM45 on L305-S5905
The laptop's Vista Home Premium was recently replaced with XP SP3.
All is well, with one smaller (1GB) issue.
I am fairly certain (not 100%) i had changed the shared memory in Vista to 128MB (i only do basic 2D desktop stuff, nothing that would need more memory), however in XP all i can see is in Video settings is on Adapter tab it shows 1024MB for the graphics card, which would explain why the XP booting with Physical Address Extension only shows 2.87GB free out of the 4GB total.
Does anyone know where intel is hiding the ability to change the shared memory size, i don't seem to get nowhere with googling around for it. I would certainly rather have the memory available for applications than waste it on doing nothing.
I am looking at the intel driver since there is no option to set memory size in BIOS either.
Thanks in advance for your help,
Danielwindows xp are seeing only 3 G of Ram memory...vista can see a lot more of ram ....i intal window Xp on my laptop and have the same probleme...a instal vista ultimatum end now i can use all the memery...i search a lot of forum and the sead theat xp cand see up to 4 G of ram...but it's nat true......and the video driver is configuretet to use 1760MB the maximum video card memory...i'm looking for a program to change the memoory of the video card..but tiil now i didn'f find anyfing...
Maybe you are looking for
-
My edit text & Images does not display the options
The Font family, size, alignment box does not appear anymore. What happened?
-
After upgrading, I have doubles
There was no option during the installation of iTunes 7 to not import music, so I picked the one least likely to wreak havoc on my library. Well, now I have duplicates of every single song in my library. What is the fastest way to solve this? Showing
-
Vector app with boolean operators
not expecting much, I need some form of vector based (lines, plines, oval, squares etc...) that also has the ability to do basic boolean operations on those shapes, (addition/merging, subtraction, etc...). I would be sending these back to the main co
-
Will my Mac keep all of my files and applications after I upgrade to Lion?
I have an early 2011 Macbook Pro. I created a Time Machine backup on an external drive incase there are any issues when upgrading to Lion. I'm new to the Mac family and I was wondering if my applications and files will remain on my computer after upg
-
Problème téléchargement after effects CS6
Bonjour, voulant créer une introduction pour ma chaine youtube, j'ai trouvé un tuto nécessitant photoshop,cinema 4D et after effects. Il me manquait juste after effects. Je suis donc allé sur Adobe Download Assistant, je me suis connecté, j'ai cherch