S205 - Sound installation problems under XP

Hi,
I just bought an Ideapad s205 free DOS. Windows XP installation went perfectly. All drivers from the lenovo web page worked without any problems. There is just the sound, that does not work. When I try to use the online offered driver it says, that the hardware does not exist. At the moment, I have no clew which driver I could use.
Thanks for your help!

Hi and welcome,
try this Thread where you can found  Windows 7 & Windows XP Driver for your machine 
or go direct to Ideapad S205 XP Driver should be the Connexant Audio Driver
keep in mind that you have Servicepack 3 for Windows XP (German) installed , also  DotNet Framework 3.5
 and this could be helpful (in german) for driver installation ..
or this the way to go ...
control panel >rightclick system >devicemanager >update driver >install from choose  location computer hdd >browse to
where driver is found in extracted , (when you try to install) path is this way  :
 C:\Drivers\Conexant Audio Driver\XP32  > choose  the LT1CC25a.inf ... > ok . driver now should be installed ...  
regards KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

  • Installation problem under AIX 5.3 with Oracle 10g

    Hello,
    I start an installation in AIX 5.3 machine with oracle 10. I install oracle 10.0 and pathes for oracle 10.2.0.2.0. I also install and all the interim patches through MOpatch utility. I also install the latest R3trans and R3load for unicode installation. But i have 4 errors under phase IMPORT ABAP. In this phase 33 packages completed succesfully. I have 4 packages with errors.
    In ImportMonitor.Console.Log i have the following errors:
    Import Monitor jobs: running 1, waiting 4, completed 33, failed 0, total 38.
    Import Monitor jobs: running 2, waiting 3, completed 33, failed 0, total 38.
    Import Monitor jobs: running 3, waiting 2, completed 33, failed 0, total 38.
    Loading of 'SAPSSEXC_4' import package: ERROR
    Import Monitor jobs: running 2, waiting 2, completed 33, failed 1, total 38.
    Loading of 'SAPPOOL' import package: ERROR
    Import Monitor jobs: running 1, waiting 2, completed 33, failed 2, total 38.
    Loading of 'DOKCLU' import package: ERROR
    Import Monitor jobs: running 0, waiting 2, completed 33, failed 3, total 38.
    Import Monitor jobs: running 1, waiting 1, completed 33, failed 3, total 38.
    Loading of 'SAPCLUST' import package: ERROR
    Import Monitor jobs: running 0, waiting 1, completed 33, failed 4, total 38.
    Inside SAPSSEXC_4.log i have the following errors:
    /usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPSSEXC_4.cmd -dbcodepage 4102 -l SAPSSEXC_4.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: T512CLU deleted/truncated #20071130102908
    myCluster (63.20.Imp): 655: error when retrieving table description for physical table T512CLU.
    myCluster (63.20.Imp): 656: return code received from nametab is 2
    myCluster (63.20.Imp): 299: error when retrieving physical nametab for table T512CLU.
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    Under SAPPOOL i have:
    usr/sap/BEQ/SYS/exe/run/R3load: START OF LOG: 20071130102907
    /usr/sap/BEQ/SYS/exe/run/R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
    /usr/sap/BEQ/SYS/exe/run/R3load: version R7.00/V1.4
    Compiled Oct 20 2007 02:05:46
    /usr/sap/BEQ/SYS/exe/run/R3load -i SAPPOOL.cmd -dbcodepage 4102 -l SAPPOOL.log -stop_on_error
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
    (DB) INFO: ATAB deleted/truncated #20071130102908
    failed to read short nametab of table AT01                           (rc=2)
    (CNVPOOL) conversion failed for row 0 of table  VARKEY = ã ±ã ±ã °â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  â  
    (CNV) ERROR: data conversion failed.  rc = 2
    (DB) INFO: disconnected from DB
    /usr/sap/BEQ/SYS/exe/run/R3load: job finished with 1 error(s)
    /usr/sap/BEQ/SYS/exe/run/R3load: END OF LOG: 20071130102908
    I read notes 421554 and 898181 i execute the directions from the notes to change the R3load and R3trans.
    Do you have any idea how can i procceed with the errors?
    Thank you in advance
    Thanasis Porpodas

    Hi,
    look at sap note 921593 and search for myCluster ,
    read that section following is a part of that note.
    Symptom:
    During the import into a UNICODE system the following error occurs
    (for example in the SAPCLUST.log):
    myCluster (63.2.Imp): 2085: (Warning:) inconsistent field names(source): physical field K1N05 appears as logic K1N5.
    myCluster (63.2.Imp): 2086: (Warning:) further investigation recommended
    myCluster (63.2.Imp): 1924: error when checking key field consistency for logic table TACOPC    .
    myCluster (63.2.Imp): 1927: logic table is canonical.
    myCluster (63.2.Imp): 1930: received return code 2 from c3_uc_check_key_field_descr_consistency.
    myCluster (63.2.Imp): 1224: unable to retrieve nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 8032: unable to acquire nametab info for logic table TACOPC    .
    myCluster (63.2.Imp): 2807: failed to convert cluster data of cluster item.
    myCluster: CLU4       *00001*
    myCluster (63.2.Imp): 319: error during conversion of cluster item.
    myCluster (63.2.Imp): 322: affected physical table is CLU4.
    (CNV) ERROR: code page conversion failed              rc = 2
    |
    |                              RSCP - Error
    | Error from:            Codepage handling (RSCP)
    | code:  128  RSCPENOOBJ   No such object
    | Dummy module without real rscpmc[34]
    | module: rscpmm  no:    2 line:    75          T100: TS008
    | TSL01: CPV  p3: Dummy-IPC   p4: rscpmc4_init
    `----
    Cause:
    This problem is caused by incorrect data which should have been removed from the source system before the export.
    Solution:
    There are two possible workarounds:
          1. Modify DDL<dbs>.TPL (<dbs> = ADA, DB2, DB4, DB6, IND, MSS, ORA) BEFORE the R3load TSK files are generated;
                  search for the keyword "negdat:" and add "CLU4" and "VER_CLUSTR" to this line.
          2. Modify the TSK file (most probably SAPCLUST.TSK) BEFORE R3load import is (re-)started;
                  search for the lines starting with "D CLU4 I" and "D VER_CLUSTR I" and change the status (i.e. "err" or "xeq") to "ign" or remove the lines.

  • Installation problem under windows XP

    My PC runs under Windows XP. I want to install LabVIEW. The installer begins to copy files and displays the message "L'application n'a pa réussi à s'initialiser correctement (0xc0000142). Cliquez sur OK pour arrêter l'application). " (I've the french version). If I click on OK, the message appears again, ant the task is very difficult to kill. despite this message, the installation continues to run but never ends. After a moment, there was no more activity. The only thing I had to do was to reboot the PC.
    The anti virus was desactivated. I tryed again with the administrator profile but with no more succes.
    Could someboty give me some explanation?
    Thanks.

    Try copying the CD to your hard drive and installing from there. I have never received this exact error but have seen other installations repaired by this procedure. It's worth a try.
    J.R. Allen

  • Installation problems under Ubuntu 6.10

    I'm using Ubuntu 6.10 (Edgy Eft) and am having some problems installing Oracle Calendar. I've posted the output of my installation below. Any ideas?
    Preparing to install...
    Extracting the JRE from the installer archive...
    Unpacking the JRE...
    Extracting the installation resources from the installer archive...
    Configuring the installer for this system's environment...
    nawk: error while loading shared libraries: libm.so.6: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /bin/ls: error while loading shared libraries: librt.so.1: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    dirname: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    basename: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    Launching installer...
    grep: error while loading shared libraries: libc.so.6: cannot open shared object file: No such file or directory
    /tmp/install.dir.26887/Linux/resource/jre/bin/java: error while loading shared libraries: libpthread.so.0: cannot open shared object file: No such file or directory

    This solution worked perfect for me on Ubuntu Gutsy (7.10)
    I did have to make gui_install and cal_linux executable: chmod +x gui_install cal_linux                                                                                                                                                                                                                                                                                                           

  • Beginners Guide sound installation -- OSS and ALSA objective features

    Beginners Guide sound installation -- OSS and ALSA objective features needed
    Hi,
    In most wiki pages i just edit the things that i think need editing. Just look at the oss history
    In all those cases i didn't really saw a need to ask for permission.. that would kinda destroy the wiki idea.
    However i want to change the sound instructions in the beginners guide so i made a copy of the entire guide and the part that i changed there is: http://wiki.archlinux.org/index.php/Use … ling_Sound now i have a slight issue there. As you can see i'm in favor of OSS and because you can spot that it's not objective. Now i would ask 2 things.
    1. Could you all post your features of OSS and ALSA
    2. Once that's done can i have permission to place that section in the beginners guide? that will also include removing the sound installation from the beginners guide which i already did in my version
    My personal reason to do this. i've read this  and am since then pro OSS and against the ALSA/PulseAudio combo. i think that combo needs to get out of linux (most notably Fedora and Ubuntu) ASAP. and oss needs to go back into the linux kernel
    Thank you for your time,
    Mark

    ngoonee wrote:
    I'm an alsa/pulse user, so I'll give a bit of the 'other side'.
    Alsa/pulse
    Pros:-
    network sound
    advanced connection of sink/source (including merging sinks)
    bluetooth support!
    highly supported by existing apps, either through directly supporting Pulse or through its alsa plugin (you should not need to recompile properly-written apps which do not assume they should write audio data directly to hardware, I think I only needed to recompile mpd on my system)
    Cons:-
    Setup isn't the easiest. Can't comment vs OSS4 because I haven't tried it
    OSS4
    Pros:-
    Everyone seems to say sound quality is better. I guess that's because they're comparing it with dmix alsa. Use pulse with alsa and you should not notice any difference in sound quality though.
    Cons:-
    Most apps nowadays default output to alsa. Meaning OSS plays them using an alsa plugin.
    USB support is admittedly skimpy.
    EDIT: Having read the sound article you referred to, my only comment is that the writer really has it in for Pulse... 3 seconds latency, where'd he get that from? I use pulse for audio recording (when I'm lazy to fire up JACK) and while there IS latency, its definitely in the ms range.
    Thanx for the input
    Gen2ly wrote:
    Gen2ly wrote:...As a side note, do you need libflashsupport here???...
    markg85, libflashsupport isn't needed. [1]
    pacman -Ql oss | grep flash
    If you don't know, please don't put in wiki, this could cause unnecessary problems.  As for the mms section:
    If your stream sounds ugly in totem like it did with me then you could try to play it with another codec like ffmpeg (mplayer). That "fixed" the issue for me. This will not fix the issue that somehow pops up in gstreamer when playing MMS streams but it will give you the option to play it with good sound quality. Playing it in mplayer is simple:
    # mplayer mmsh://yourstreamurl
    Could you fix this?  ffmpeg is not a codec .  Also define ugly, and what is somehow?
    markg85 wrote:Thanx a lot for your feedback. i will certainly use it when i make more edits.
    As for the things you didn't know. As soon as i fully understand how i can get a microphone working in OSS i will add that to the wiki as well. Unless you already know it.. in that case, feel free to add it.
    For the mic, I did get mine going.  Can't remember just how I did mine (sorry, think I had to disable one of the inputs),  but do remember to prevent it from passing through the speakers had to disable "Misc Microphone".
    # ossmix
    Selected mixer 0/High Definition Audio ALC888
    Known controls are:
    jack.green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
    jack.green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.green.mute ON|OFF (currently OFF)
    jack.black.mode <front|rear|center/LFE|side|pcm4|input> (currently center/LFE)
    jack.black [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.black.mute ON|OFF (currently OFF)
    jack.orange.mode <front|rear|center/LFE|side|pcm4|input> (currently rear)
    jack.orange [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.orange.mute ON|OFF (currently OFF)
    jack.gray.mode <front|rear|center/LFE|side|pcm4|input> (currently pcm4)
    jack.gray [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.gray.mute ON|OFF (currently OFF)
    jack.pink.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
    jack.pink [<leftvol>:<rightvol>] (currently 19.9:19.9 dB)
    jack.pink.mute ON|OFF (currently OFF)
    jack.fp-pink.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
    jack.fp-pink [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.fp-pink.mute ON|OFF (currently OFF)
    jack.blue.mode <front|rear|center/LFE|side|pcm4|input> (currently input)
    jack.blue [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.blue.mute ON|OFF (currently OFF)
    jack.fp-green.mode <front|rear|center/LFE|side|pcm4|input> (currently front)
    jack.fp-green [<leftvol>:<rightvol>] (currently 29.9:29.9 dB)
    jack.fp-green.mute ON|OFF (currently OFF)
    record.mix.mute.mic1 ON|OFF (currently OFF)
    record.mix.mute.fp-mic1 ON|OFF (currently OFF)
    record.mix.mute.linein1 ON|OFF (currently OFF)
    record.mix.mute.fp-headphone1 ON|OFF (currently OFF)
    record.mix.mute.green1 ON|OFF (currently OFF)
    record.mix.mute.black1 ON|OFF (currently OFF)
    record.mix.mute.orange1 ON|OFF (currently OFF)
    record.mix.mute.gray1 ON|OFF (currently OFF)
    record.mix.mute.input-mix1 ON|OFF (currently OFF)
    record.mix1 [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    record.mix.mute.mic2 ON|OFF (currently OFF)
    record.mix.mute.fp-mic2 ON|OFF (currently OFF)
    record.mix.mute.linein2 ON|OFF (currently OFF)
    record.mix.mute.fp-headphone2 ON|OFF (currently OFF)
    record.mix.mute.green2 ON|OFF (currently OFF)
    record.mix.mute.black2 ON|OFF (currently OFF)
    record.mix.mute.orange2 ON|OFF (currently OFF)
    record.mix.mute.gray2 ON|OFF (currently OFF)
    record.mix.mute.input-mix2 ON|OFF (currently OFF)
    record.mix2 [<leftvol>:<rightvol>] (currently 4.4:2.9 dB)
    misc.mic [<leftvol>:<rightvol>] (currently 0.0:0.0 dB)
    misc.fp-mic [<leftvol>:<rightvol>] (currently 46.4:37.4 dB)
    misc.linein [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.fp-headphone [<leftvol>:<rightvol>] (currently 34.4:34.4 dB)
    misc.green [<leftvol>:<rightvol>] (currently 34.4:38.9 dB)
    misc.black [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.orange [<leftvol>:<rightvol>] (currently 38.9:38.9 dB)
    misc.gray [<leftvol>:<rightvol>] (currently 40.4:41.9 dB)
    misc.input-mix <mic|fp-mic|linein> (currently mic)
    misc.front-mute ON|OFF (currently OFF)
    misc.input-mix-mute1 ON|OFF (currently OFF)
    misc.front1 [<leftvol>:<rightvol>] (currently 43.4:43.4 dB)
    misc.front2 <front|input-mix> (currently front)
    misc.rear-mute ON|OFF (currently OFF)
    misc.input-mix-mute2 ON|OFF (currently OFF)
    misc.rear1 [<leftvol>:<rightvol>] (currently 4.4:4.4 dB)
    misc.rear2 <rear|input-mix> (currently rear)
    misc.center/lfe-mute ON|OFF (currently OFF)
    misc.input-mix-mute3 ON|OFF (currently OFF)
    misc.center/lfe1 [<leftvol>:<rightvol>] (currently 41.9:41.9 dB)
    misc.center/lfe2 <center/LFE|input-mix> (currently center/LFE)
    misc.side-mute ON|OFF (currently OFF)
    misc.input-mix-mute4 ON|OFF (currently OFF)
    misc.side1 [<leftvol>:<rightvol>] (currently 35.9:35.9 dB)
    misc.side2 <side|input-mix> (currently side)
    misc.pcm4-mute ON|OFF (currently OFF)
    misc.input-mix-mute5 ON|OFF (currently OFF)
    misc.pcm41 [<leftvol>:<rightvol>] (currently 25.4:25.4 dB)
    misc.pcm42 <pcm4|input-mix> (currently pcm4)
    vmix0-enable ON|OFF (currently ON)
    vmix0-rate <decimal value> (currently 48000) (Read-only)
    vmix0-channels <Stereo|Multich> (currently Stereo)
    vmix0-src <Fast|Low|Medium|High|High+|Production|OFF> (currently Medium)
    vmix0-outvol <monovol> (currently 25.0 dB)
    vmix0-invol <monovol> (currently 25.0 dB)
    vmix0.pcm8 [<leftvol>:<rightvol>] (currently 19.9:19.9 dB) ("knotify4")
    vmix0.pcm9 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
    vmix0.pcm10 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
    vmix0.pcm11 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
    For libflashsupport on the same page you linked it clearly states:
    #  Flash V9 and V10 require libflashsupport to output sound via OSS. Typically a 32-bit version of the library is required.
    # Flash V10 has a 64-bit version which requires a 64 bit libflashsupport.
    Also i tested it with and without libflashsupport. On archlinux (x64 running here) there most certainly is a need for libflashsupport when you want to have sound in your flash. And yes i tested the archlinux OSS version and the mercurial version (running now) bith need it  installed manually! On my pc sound in flash didn't work without it but did with it. So, no not removing from the wiki as it's needed. But i see you removed it for me! please do NOT do that if you didn't even verified it. I use flash 10 x64 and i need it!
    As for the ffmpeg "codec" changed it to backend.
    And i did get the microphone working near perfect: http://www.4front-tech.com/forum/viewtopic.php?p=13192
    Now for some news you all might like.
    On my school i need to do an investigation to whatever i want and i'm heavily thinking about investigating the pros/cons of alsa compared to oss (or oss compared to alsa). That investigation will take from monday next week till next mondey till friday 23 of oktober. In that investigation i'm going to do some in depth look of alsa and oss and that will include the usability as well.
    Following up on that investigation i will spend another 8 weeks on my school making a volume control application that can be used with alsa and oss and easily expandable with other sound systems. The goal of this is to make one sound application that can manage (in the first place) alsa and oss. oss is going to be implemented and alsa is probably going to be dummy implemented because it's likely way to much for me to implement both.
    Before you get to exited, both projects (investigating and making the application) are just made up today and i just don't know if both will get accepted by my school. I asked one teacher and he liked the idea a lot and could potentially have a value for the sound management under linux. Once i do get this started i will involve the community (YOU!) with this since this project can't be done without the community specially the investigation.
    And once i start and have something to tell/ask i will blog about it on http://blog.mageprojects.com
    edit::
    And this idea already got dumped. read more a few posts down or click: http://bbs.archlinux.org/viewtopic.php? … 34#p612634
    Last edited by markg85 (2009-09-03 17:51:45)

  • Sound driver problems

    I recently installed Windows 10 build 9841 on my Dell Inspiron 3531 from an old bootable USB I had lying around from last October or so. The OS and a few updates installed without issue, but this morning, strange things started happening. The computer was
    in sleep mode. For some reason, and without my consent or approval, the computer turned on by itself and began installing a new OS (which I would later discover to be Build 9926). To my pleasant surprise, there are many improvements. However, my audio is now
    completely down. I checked the sound drivers, and everything looks fine. I even tried a Realtek 6.0 driver, which gave me error code 18 upon restart and did nothing. I did, however, notice a few small clues in the Events and Driver Details tabs of the
    properties of my sound driver. Under "Information" in "Intel(R) Display Audio Properties," there are some events titled "Device Install Requested," "Driver Service Added (IntcDAud)" and "Device installed (intcaud.inf)."
    Under "Device install requested," I found this:
    Device HDAUDIO\FUNC_01&VEN_8086&DEV_2882&SUBSYS_80860101&REV_1000\4&70377b6&0&0201 requires further installation.
    However, I do not see how this could be the problem, as the exact same sequence and text appear in the original install six days prior, and my sound worked then.
     Also, under the Device Manager tab "Other Devices," I found another listing of my sound driver with error code 28. The entry is entitled "Audio Device on High Definition Audio Bus." The error says:
    "The drivers for this device are not installed. (Code 28)
    This operation returned because the timeout period expired.
    To find a driver for this device, click Update Driver."
     Please help, I want my sound back!!

    TPB
    There is a known problem with the realtek driver (among others).  Realtek is working on it but there is no ETA for a fix.  Here is what they say
    Speaking of that big Realtek
    driver package, I’m sure you’ve seen the issue with it failing to install with a 0x800705b4 timeout error. We’re still working on a solution for that one
    Wanikiya and Dyami--Team Zigzag

  • Installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system

    We are having installation problem with Siebel8.0 on Oracle Enterprise Linux 4 system.
    Using interface, when installation come up to “Installing Wizard” window where Gateway Name Server Configuration window should take place, everything just freeze up
    Using console, after installation we obtain following errors:
    Installing Siebel Enterprise Server. Please wait...
    unable to launch: "ksh export
    LD_LIBRARY_PATH=/siebel/gtwysrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/gtwysrvr/bin/setup.jar run -args LANG=ENU
    MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm" error code:
    "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/bin/setup.jar run -args LANG=ENU
    REPEAT=FALSE MODE=LIVE MODEL_FILE=/siebel/siebsrvr/admin/siebel_server.scm"
    error code: "236"(SBL-STJ-00152)
    LD_LIBRARY_PATH=/siebel/siebsrvr/mgmtagent/lib;PATH=${PATH}:.;/root/istemp8058094162222/_bundledJRE_/bin/java
    -Dtemp.dir=/root -cp /siebel/siebsrvr/mgmtagent/bin/setup.jar run -args
    LANG=ENU MODE=LIVE
    MODEL_FILE=/siebel/siebsrvr/mgmtagent/admin/mgmtagent_ses.scm" error code:
    "236"(SBL-STJ-00152)
    Running command :
    ./ssincfgw -is:javaconsole -console -args LANG=ENU MODE=LIVE MODEL_FILE=/siebel/gtwysrvr/admin/enterprise_console.scm
    Infinite loop of following error pops out:
    An error occurred during wizard bean change notification:
    java.lang.NoClassDefFoundError
    at ConfigInitialize.execute(ConfigInitialize.java:21)
    at com.installshield.wizard.StandardWizardListener.execute(StandardWizardListener.java:123)
    Is there any clue how this error can be solved??
    Thanks in advance!!
    Gordon
    Message was edited by:
    user605023

    I'm facing the same error message while install Siebel 8.0 on OEL. But before I had this ksh problem, it complains about disc space first, and I actually has plenty of disk space under the directory (it needs only 0.7 G and I have 17G free). Anybody has encountered such problem before?
    /net/sdcnas05/vol/engfs01/v_sia/8.0SIA[20405|http://forums.oracle.com/forums/]/Release/Linux/Server/Siebel_Enterprise_Server
    -bash-3.00$ ./setuplinux -is:javaconsole -console
    Initializing InstallShield Wizard........
    Initializing InstallShield Wizard........
    Launching InstallShield Wizard........
    0% 25% 50% 75% 100%
    Welcome to the InstallShield Wizard for Siebel Enterprise Server
    The InstallShield Wizard will install Siebel Enterprise Server on your
    computer.
    To continue, choose Next.
    Siebel Enterprise Server
    Siebel Systems
    Press 1 for Next, 3 to Cancel or 4 to Redisplay [1]
    Siebel Enterprise Server Install Location
    Please specify a directory or press Enter to accept the default directory.
    Directory Name: [siebel] /slot/ems1115/appmgr/20405
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the products you wish to install.
    [ ] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 1
    [X] 1 - Gateway Name Server
    [ ] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]: 2
    [X] 1 - Gateway Name Server
    [X] 2 - Siebel Server
    [ ] 3 - Database Configuration Utilities
    [ ] 4 - EAI Connectors
    To select an item enter its number, or 0 when you are finished: [0]:
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Configuring uninstallers. Please wait...
    0% 25% 50% 75% 100%
    Choose the setup type that best suits your needs.
    [X] 1 - Typical
    [ ] 2 - Compact
    [ ] 3 - Custom
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    Please select the languages you wish to install.
    [X] 1 - enu - English (American)
    [ ] 2 - fin - Finnish
    [ ] 3 - kor - Korean
    [ ] 4 - cht - Chinese (Traditional)
    [ ] 5 - ita - Italian (Standard)
    [ ] 6 - esn - Spanish (Modern)
    [ ] 7 - deu - German (Standard)
    [ ] 8 - chs - Chinese (Simplified)
    [ ] 9 - tha - Thai
    [ ] 10 - dan - Danish
    [ ] 11 - heb - Hebrew
    [ ] 12 - fra - French (Standard)
    [ ] 13 - nld - Dutch (Standard)
    [ ] 14 - ptb - Portuguese (Brazilian)
    [ ] 15 - csy - Czech
    [ ] 16 - jpn - Japanese
    [ ] 17 - ptg - Portuguese (Standard)
    [ ] 18 - ara - Arabic (Sa`udi)
    [ ] 19 - sve - Swedish
    To select an item enter its number, or 0 when you are finished: [0]
    Press 1 for Next, 2 for Previous, 3 to Cancel or 4 to Redisplay [1]
    {color:#ff0000}*Drive "/slot/ems1115/appmgr/20405" does not have enough space to install the*
    selected configuration. Please free up "766446" KB on drive
    *"/slot/ems1115/appmgr/20405" before continuing.*{color}
    -bash-3.00$ pwd
    /slot/ems1115/appmgr/20405
    -bash-3.00$ df -h .
    Filesystem Size Used Avail Use% Mounted on
    sdc1002nap-vlan1:/vol/ems_39426_1115
    71G 55G 17G 77% /slot/ems1115

  • Satellite L750 - drivers installation problem

    Hello good people of the internet,
    I have a problem with drivers' updates/installation on my Satellite L750-1E3, Windows 7-64 bit.
    When I launch the installer, it decompresses, telling me it will launch afterwards, but then the window closes and nothing further happens.
    I've read about the same problem one person here had with the L855-10P series but, maybe because I'm a girl or maybe because I'm not a native English speaker, I didn't uderstand what to do...
    I actually have problem with more things.
    My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer".
    So I tried to reinstall the driver but the problem I described above appeared.
    The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
    And the last one, for about a month there are problems with the sound on my notebook.
    First cracking of sound and then it stops working completely and I have to restart the computer.
    Again, I tried to reinstall the sound drivers.
    There are two drivers on the Toshiba site, one of them reinstalled just fine but the other one (nvidia, I think) had the same problem as the other drivers.
    Someone please tell me what to do, because I am becaoming really desperate and I seriously considered throwing my notebook out of the window.
    Thank you

    Usually the HDD recovery is the easiest to get the notebooks factory settings and to get it running again.
    >My webcam stopped working, when I try to launch it I get the error message that tells me "the initialization went wrong, restart your webcam or computer". So I tried to reinstall the driver but the problem I described above appeared..
    Its interesting to know if the webcam or an unknown imagine device (probably webcam) appear in device manager. Please check this.
    If the webcam isnt listed there, you should check if the webcam is enabled in BIOS.
    To access the BIOS press F2. Then go to Advanced tab -> System configuration -> webcam
    If the webcam is enabled in BIOS but still not recognized and not listed in device manager, then you should recover the notebook to factory setting to check if the webcam module isnt faulty.
    >The same driver installation problem appeared when Tempro told me to update my blu-ray driver (I download all the drivers from eu.computers.toshiba-europe.com).
    The Blu-ray player update works only for notebook equipped with blu-ray drive. If your notebook does not support blu-ray drive

  • SQL Developer Installation Problems

    Hi,
    We are trying to find a workable alternative to TOAD and have tried to install SQL Developer with not much success.... I think I am just about to give up but hope this last attempt to post for help can create a miracle.
    I would appreciate very much if any one knows of a comprehensive document out there that can help trouble shoot the installation problems.
    Let me give you the hardware and software versions first and then the problems.
    1) SQL Developer tried: sqldeveloper-1.2.1.3213-no-jre and sqldeveloper-1.2.1.3213
    2) JRE tried: JRE 1.5 and JRE 6 (C:\Program Files\Java\jre1.6.0_03)
    3) Window: XP Professional version 2002 Service pack 2
    4) Hardware: Intel Pentium 4 CPU 2.80 GHz, 1.98 GB of RAM
    Problems:
    1) SQL Developer could not find native JDBC. I don't understand why, despite all the variables set in Oracleclient10g_basic in the registry, SQL Developer did not seem to be able to find a 10g client on a network drive. I have to install 10g client directly onto my pc (C:\oracle\product\10.2.0\client_1) to solve this problem.
    2) SQL Developer abruptly disappeared after database login.
    I was able to connect and log into an Oralce 10g database with TNS Connect Identifier approach. There were objects (tables, views, etc) showed up briefly on the left hand side of the SQL Developer and then it just completely disappeared without even an error message or a tearful good-bye.
    The only thing I can find is this error log about EXCEPTION_ACCESS_VIOLATION. After hours searching through OTN for possible mentioning of this error with SQL Developer, I found nothing so far.
    Why is it so difficult to install SQL Developer? Are there a set of un-spoken pre-requisites that has to be satisfied before it can be installed properly? If so, what are they? Path system variable? Registry? Anything else?
    Here's the complete EXCEPTION_ACCESS_VIOLATION error log:
    # An unexpected error has been detected by Java Runtime Environment:
    # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x2ca5683c, pid=952, tid=2576
    # Java VM: Java HotSpot(TM) Client VM (1.6.0_03-b05 mixed mode, sharing)
    # Problematic frame:
    # C [OraOCIEI10.dll+0x4f683c]
    # If you would like to submit a bug report, please visit:
    # http://java.sun.com/webapps/bugreport/crash.jsp
    --------------- T H R E A D ---------------
    Current thread (0x04330400): JavaThread "Init Insight" [_thread_in_native, id=2576]
    siginfo: ExceptionCode=0xc0000005, reading address 0x00000000
    Registers:
    EAX=0x31a28e40, EBX=0x00000000, ECX=0x03231622, EDX=0x00000000
    ESP=0x04b0f168, EBP=0x04b0f1a8, ESI=0x00000001, EDI=0x0413ded4
    EIP=0x2ca5683c, EFLAGS=0x00010297
    Top of Stack: (sp=0x04b0f168)
    0x04b0f168: 00000001 00a3fb8e 0000000a 00000001
    0x04b0f178: 0413c78c 00000001 02c52aa8 0000000a
    0x04b0f188: 00000020 00a4047e 090ea038 0413def4
    0x04b0f198: 03231622 6d8a87b3 032325c1 0413c78c
    0x04b0f1a8: 04b0f1d8 2ca57072 0413ded4 032325c1
    0x04b0f1b8: 00000001 00000000 03231620 03231622
    0x04b0f1c8: 00000000 00000000 00000000 00000000
    0x04b0f1d8: 04b0f234 2ca56e06 0413c78c 0413ded4
    Instructions: (pc=0x2ca5683c)
    0x2ca5682c: 5c 00 a1 80 58 b3 31 88 9f c4 00 00 00 8b 14 98
    0x2ca5683c: 8b 0a 81 e1 00 80 00 00 89 4d dc 0f 85 90 03 00
    Stack: [0x04ac0000,0x04b10000), sp=0x04b0f168, free space=316k
    Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
    C [OraOCIEI10.dll+0x4f683c]
    C [OraOCIEI10.dll+0x4f7072]
    C [OraOCIEI10.dll+0x4f6e06]
    C [OraOCIEI10.dll+0x419685]
    C [OCI.dll+0x7333]
    Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
    j oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe(Loracle/jdbc/driver/OracleStatement;JIIIZZZZ[BIBII[SI[B[CII[SII[B[CII[I[S[BIIIIZZ[Loracle/jdbc/driver/Accessor;[[[B[J[BI[CI[SIZ)I+0
    j oracle.jdbc.driver.T2CCallableStatement.executeForDescribe()V+271
    j oracle.jdbc.driver.T2CCallableStatement.executeForRows(Z)V+41
    j oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout()V+275
    j oracle.jdbc.driver.OraclePreparedStatement.executeInternal()I+94
    j oracle.jdbc.driver.OraclePreparedStatement.execute()Z+17
    j oracle.jdbc.driver.OracleCallableStatement.execute()Z+60
    j oracle.dbtools.raptor.insight.CompletionInsight.getInsightableOracleDatabase(Loracle/javatools/db/Database;)Loracle/dbtools/raptor/insight/InsightableDatabase;+70
    j oracle.dbtools.raptor.insight.CompletionInsight.<init>(Loracle/ide/Context;Loracle/javatools/db/Database;)V+161
    j oracle.dbtools.sqlworksheet.sqlview.SqlEditorMainPanel$5.run()V+52
    j java.lang.Thread.run()V+11
    v ~StubRoutines::call_stub
    --------------- P R O C E S S ---------------
    Java Threads: ( => current thread )
    =>0x04330400 JavaThread "Init Insight" [_thread_in_native, id=2576]
    0x0416ac00 JavaThread "Timer-4" [_thread_blocked, id=1460]
    0x0412cc00 JavaThread "Timer-3" [_thread_blocked, id=2544]
    0x04323800 JavaThread "WeakDataReference polling" [_thread_blocked, id=3756]
    0x0315cc00 JavaThread "Image Fetcher 3" daemon [_thread_blocked, id=3412]
    0x02c17c00 JavaThread "Image Fetcher 2" daemon [_thread_blocked, id=2124]
    0x04324800 JavaThread "Image Fetcher 1" daemon [_thread_blocked, id=2088]
    0x04321800 JavaThread "Image Fetcher 0" daemon [_thread_blocked, id=276]
    0x02ca2c00 JavaThread "WaitCursorTimer" daemon [_thread_blocked, id=2096]
    0x00296800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3816]
    0x02cb0400 JavaThread "Timer-1" [_thread_blocked, id=2832]
    0x02c32000 JavaThread "IconOverlayTracker Timer" [_thread_blocked, id=1204]
    0x04060800 JavaThread "Log Page Updater" [_thread_blocked, id=2160]
    0x03323800 JavaThread "TimerQueue" daemon [_thread_blocked, id=3996]
    0x032d1800 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=4004]
    0x032ca400 JavaThread "AWT-Windows" daemon [_thread_in_native, id=1488]
    0x032c9800 JavaThread "AWT-Shutdown" [_thread_blocked, id=256]
    0x032c8400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=1064]
    0x02c0d000 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=2956]
    0x02c08400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=3236]
    0x02c07400 JavaThread "Attach Listener" daemon [_thread_blocked, id=3248]
    0x02c06800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=3232]
    0x02bfe400 JavaThread "Finalizer" daemon [_thread_blocked, id=2328]
    0x02bfd400 JavaThread "Reference Handler" daemon [_thread_blocked, id=1668]
    Other Threads:
    0x02bfc000 VMThread [id=2868]
    0x02c0e800 WatcherThread [id=2940]
    VM state:not at safepoint (normal execution)
    VM Mutex/Monitor currently owned by a thread: None
    Heap
    def new generation total 1536K, used 500K [0x06960000, 0x06b00000, 0x090c0000)
    eden space 1408K, 26% used [0x06960000, 0x069bd3b0, 0x06ac0000)
    from space 128K, 100% used [0x06ac0000, 0x06ae0000, 0x06ae0000)
    to space 128K, 0% used [0x06ae0000, 0x06ae0000, 0x06b00000)
    tenured generation total 19372K, used 12857K [0x090c0000, 0x0a3ab000, 0x26960000)
    the space 19372K, 66% used [0x090c0000, 0x09d4e400, 0x09d4e400, 0x0a3ab000)
    compacting perm gen total 22272K, used 22205K [0x26960000, 0x27f20000, 0x2a960000)
    the space 22272K, 99% used [0x26960000, 0x27f0f780, 0x27f0f800, 0x27f20000)
    ro space 8192K, 62% used [0x2a960000, 0x2ae614a8, 0x2ae61600, 0x2b160000)
    rw space 12288K, 52% used [0x2b160000, 0x2b7a7278, 0x2b7a7400, 0x2bd60000)
    Dynamic libraries:
    0x00400000 - 0x00423000      C:\WINDOWS\system32\java.exe
    0x7c900000 - 0x7c9b0000      C:\WINDOWS\system32\ntdll.dll
    0x7c800000 - 0x7c8f5000      C:\WINDOWS\system32\kernel32.dll
    0x77dd0000 - 0x77e6b000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77e70000 - 0x77f02000      C:\WINDOWS\system32\RPCRT4.dll
    0x77fe0000 - 0x77ff1000      C:\WINDOWS\system32\Secur32.dll
    0x7c340000 - 0x7c396000      C:\Program Files\Java\jre1.6.0_03\bin\msvcr71.dll
    0x6d7c0000 - 0x6da0a000      C:\Program Files\Java\jre1.6.0_03\bin\client\jvm.dll
    0x7e410000 - 0x7e4a0000      C:\WINDOWS\system32\USER32.dll
    0x77f10000 - 0x77f57000      C:\WINDOWS\system32\GDI32.dll
    0x76b40000 - 0x76b6d000      C:\WINDOWS\system32\WINMM.dll
    0x6d310000 - 0x6d318000      C:\Program Files\Java\jre1.6.0_03\bin\hpi.dll
    0x76bf0000 - 0x76bfb000      C:\WINDOWS\system32\PSAPI.DLL
    0x6d770000 - 0x6d77c000      C:\Program Files\Java\jre1.6.0_03\bin\verify.dll
    0x6d3b0000 - 0x6d3cf000      C:\Program Files\Java\jre1.6.0_03\bin\java.dll
    0x6d7b0000 - 0x6d7bf000      C:\Program Files\Java\jre1.6.0_03\bin\zip.dll
    0x6d000000 - 0x6d1c3000      C:\Program Files\Java\jre1.6.0_03\bin\awt.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x77c10000 - 0x77c68000      C:\WINDOWS\system32\msvcrt.dll
    0x76390000 - 0x763ad000      C:\WINDOWS\system32\IMM32.dll
    0x774e0000 - 0x7761d000      C:\WINDOWS\system32\ole32.dll
    0x5ad70000 - 0x5ada8000      C:\WINDOWS\system32\uxtheme.dll
    0x73760000 - 0x737a9000      C:\WINDOWS\system32\ddraw.dll
    0x73bc0000 - 0x73bc6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x6d2b0000 - 0x6d303000      C:\Program Files\Java\jre1.6.0_03\bin\fontmanager.dll
    0x74720000 - 0x7476b000      C:\WINDOWS\system32\MSCTF.dll
    0x7c9c0000 - 0x7d1d7000      C:\WINDOWS\system32\shell32.dll
    0x77f60000 - 0x77fd6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x773d0000 - 0x774d3000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2982_x-ww_ac3f9c03\comctl32.dll
    0x5d090000 - 0x5d12a000      C:\WINDOWS\system32\comctl32.dll
    0x77b40000 - 0x77b62000      C:\WINDOWS\system32\Apphelp.dll
    0x77c00000 - 0x77c08000      C:\WINDOWS\system32\VERSION.dll
    0x03850000 - 0x0386a000      C:\sqldeveloper-1.2.1.3213-no-jre\sqldeveloper\ide\lib\idenative.dll
    0x77120000 - 0x771ab000      C:\WINDOWS\system32\OLEAUT32.dll
    0x6d570000 - 0x6d583000      C:\Program Files\Java\jre1.6.0_03\bin\net.dll
    0x71ab0000 - 0x71ac7000      C:\WINDOWS\system32\WS2_32.dll
    0x71aa0000 - 0x71aa8000      C:\WINDOWS\system32\WS2HELP.dll
    0x6d590000 - 0x6d599000      C:\Program Files\Java\jre1.6.0_03\bin\nio.dll
    0x605d0000 - 0x605d9000      C:\WINDOWS\system32\mslbui.dll
    0x6d220000 - 0x6d243000      C:\Program Files\Java\jre1.6.0_03\bin\dcpr.dll
    0x71a50000 - 0x71a8f000      C:\WINDOWS\System32\mswsock.dll
    0x76f20000 - 0x76f47000      C:\WINDOWS\system32\DNSAPI.dll
    0x76fb0000 - 0x76fb8000      C:\WINDOWS\System32\winrnr.dll
    0x76f60000 - 0x76f8c000      C:\WINDOWS\system32\WLDAP32.dll
    0x66210000 - 0x66219000      C:\WINDOWS\system32\netware\NWWS2NDS.DLL
    0x50d50000 - 0x50d98000      C:\WINDOWS\system32\NETWIN32.DLL
    0x50d00000 - 0x50d15000      C:\WINDOWS\system32\CLNWIN32.DLL
    0x50df0000 - 0x50e10000      C:\WINDOWS\system32\LOCWIN32.DLL
    0x50db0000 - 0x50ddc000      C:\WINDOWS\system32\NCPWIN32.dll
    0x71ad0000 - 0x71ad9000      C:\WINDOWS\system32\WSOCK32.dll
    0x66220000 - 0x6622c000      C:\WINDOWS\system32\netware\NWWS2SLP.DLL
    0x66250000 - 0x66257000      C:\WINDOWS\system32\NWSRVLOC.dll
    0x76fc0000 - 0x76fc6000      C:\WINDOWS\system32\rasadhlp.dll
    0x662b0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71a90000 - 0x71a98000      C:\WINDOWS\System32\wshtcpip.dll
    0x6d560000 - 0x6d569000      C:\Program Files\Java\jre1.6.0_03\bin\management.dll
    0x62f00000 - 0x62f13000      C:\oracle\product\10.2.0\client_1\ocijdbc10.dll
    0x03e50000 - 0x03ea7000      C:\oracle\product\10.2.0\client_1\OCI.dll
    0x2c560000 - 0x31bf6000      C:\oracle\product\10.2.0\client_1\OraOCIEI10.dll
    0x77a80000 - 0x77b14000      C:\WINDOWS\system32\CRYPT32.dll
    0x77b20000 - 0x77b32000      C:\WINDOWS\system32\MSASN1.dll
    VM Arguments:
    jvm_args: -Xmx512M -Xverify:none -XX:JavaPriority10_To_OSPriority=10 -XX:JavaPriority9_To_OSPriority=9 -Doracle.ide.util.AddinPolicyUtils.OVERRIDE_FLAG=true -Dsun.java2d.ddoffscreen=false -Dwindows.shell.font.languages= -Dide.conf=sqldeveloper.conf -Dide.home.dir.name=.sqldeveloper
    java_command: oracle.ide.boot.Launcher
    Launcher Type: SUN_STANDARD
    Environment Variables:
    PATH=C:\oracle\product\10.2.0\client_1;X:\oracle10g\product\10.2.0\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Intel\DMIX;C:\WINDOWS\system32\nls;C:\WINDOWS\system32\nls\ENGLISH;C:\Program Files\IDM Computer Solutions\UltraEdit-32
    USERNAME=leexx255
    OS=Windows_NT
    PROCESSOR_IDENTIFIER=x86 Family 15 Model 2 Stepping 9, GenuineIntel
    --------------- S Y S T E M ---------------
    OS: Windows XP Build 2600 Service Pack 2
    CPU:total 1 (1 cores per cpu, 1 threads per core) family 15 model 2 stepping 9, cmov, cx8, fxsr, mmx, sse, sse2
    Memory: 4k page, physical 2079468k(1385300k free), swap 4021668k(3516444k free)
    vm_info: Java HotSpot(TM) Client VM (1.6.0_03-b05) for windows-x86, built on Sep 24 2007 22:24:33 by "java_re" with unknown MS VC++:1310
    Is this a java problem? SQL Developer problem? Or something else?
    Thanks in advance,
    a TOAD lover

    The problem you are seeing (the EXCEPTION_ACCESS_VIOLATION) is a result of a version mismatch between the JDBC driver being used by SQL Developer and the Oracle client that is found on the path.
    This issue only occurs when trying to use the OCI version of the JDBC driver. The simplest fix is to switch to using the basic connection type and thus using the thin (all Java) JDBC driver. As no Oracle client is required in this case, the version mismatch won't be an issue.
    However, the connection approach you are using should work, and if you wish to try to sort out the problems there, we should be able to further diagnose the underlying cause of the version mismatch.
    To do this, I would need to see what SQL Developer thinks are the potential Oracle client installs, as well as which install it ends up picking. Can you copy/paste the output in the Log Window (Logging Page) that is present after SQL Developer starts (but before you attempt to connect to any database)? There should be a whole series of entries like 'Checking for ORACLE_HOME environment variable' and 'Checking JDBC driver at <some path>'
    These log entries are output by SQL Developer as it tries to sort out the various bits of information about Oracle client installs and thus give a peek at the selection logic being used.
    Oh, and also - the value of your PATH variable would be useful as well. It may be that there is an Oracle client install on the PATH that supersedes the install SQL Developer is finding via the registry or ORACLE_HOME variable.
    - John McGinnis
    SQL Developer Team

  • Sound not working under Lion. No output device. Need fix!

    Hi there,
    after installing Lion 10.7 I never managed to get my sound working. Under System Preferences -> Sound I got no sound devices installed. Same happens when I open Audio-Midi-Setup. Everything is greyed out, can't even add something. Audio-Midi-Setup also will CRASH when trying to configure anything.
    I tried already everything as suggested in forums:
    - Repaired Disk Permissions
    - Rebootet several times
    - Reset PRAM
    - Reinstalled OSX Lion again again and again
    - Updated to 10.7.2 (all the same crap)
    - Deleted some plists and stuff as suggested by users
    - Ran Apple Hardware Test from my second SL Applications Disk
    I've spent hours and nothing seems to work with this crappy OS. Apple, we really need a fix for this!
    Lion = Windows Vista!

    Hi,
    not sure if this helps, but you can try. I installed Lion today and found myself in a Czech localization of Mac OS. (I had Czech set as my preferred language, but Czech localization was not available before Lion, so this was new for me.) Since I found the localized folder names extremely confusing, I decided to switch to English. However, after a reboot the sound stopped working and I experienced exactly the same problems as you're describing. Out of desperation I tried switching the localization back to Czech and voila, the sound is working again. Let's hope this gets fixed soon.

  • Camera raw 5.4 installations problems

    Hi everyone.
    I have an installation problem with CS4 windows 32-bit, the version is compatible with both 64-bit and 32-bit but Im getting an error
    that it only gives me the option to hit the quit button, I don't know why.
    does anyone had this problemmm??
    thanks!!

    Your post is not a model of clarity.
    At what stage of doing what does this "Quit" message appear?
    It sounds as if you have installed the plug-in incorrectly. Did you follow the instructions exactly?
    The slightest false step and you are in trouble.

  • CRS Installation problem - node out of sync?

    Hi at all
    I have some installation problems with 10gR2 Rac and CRS on RHEL 4.0 (kernel 2.6.9) and Vmware Workastion 5.0. . Also I have applied suggestion in the vmware KB available at this link
    http://kb.vmware.com/vmtnkb/search.do?cmd=displayKC&docType=kc&externalId=1420&sliceId=SAL_Public
    due some synchronization problems .
    Also, I have configured ntpd daemon for sync my virtual machine.
    The error message from installActions2006-12-18_01-10-58AM.log is:
    INFO: Exclude file list /tmp/OraInstall2006-12-18_01-10-58AM/installExcludeFile.lst does not exist or is empty. The file is ignored.
    WARNING: Error while copying directory /app/oracle/product/10.2.0/crs with exclude file list 'null' to nodes 'oracle002'. [PRKC-1002 : All the submitted commands did not execute successfully]
    oracle002:
    /bin/tar: ./bin/ocrcheck: time stamp 2006-12-18 01:15:27 is 34 s in the future
    /bin/tar: ./bin/crs_register: time stamp 2006-12-18 01:15:28 is 35 s in the future
    /bin/tar: ./bin/cemutls: time stamp 2006-12-18 01:15:28 is 34 s in the future
    /bin/tar: ./bin/usrvip: time stamp 2006-12-18 01:15:28 is 34 s in the future
    /bin/tar: ./bin/cluvfy: time stamp 2006-12-18 01:15:28 is 32 s in the future
    /bin/tar: ./bin/racgons: time stamp 2006-12-18 01:15:28 is 30 s in the future
    /bin/tar: ./bin/cluutil: time stamp 2006-12-18 01:15:28 is 29 s in the future
    /bin/tar: ./bin/crs_profile: time stamp 2006-12-18 01:15:28 is 29 s in the future
    /bin/tar: ./bin/vipca: time stamp 2006-12-18 01:15:47 is 48 s in the future
    /bin/tar: ./bin/clscfg: time stamp 2006-12-18 01:15:27 is 25 s in the future
    /bin/tar: ./bin/clsid: time stamp 2006-12-18 01:15:27 is 25 s in the future
    /bin/tar: ./bin/crs_start: time stamp 2006-12-18 01:15:28 is 26 s in the future
    /bin/tar: ./bin/crsctl: time stamp 2006-12-18 01:15:27 is 24 s in the future
    /bin/tar: ./bin/evmsort: time stamp 2006-12-18 01:15:28 is 24 s in the future
    /bin/tar: ./bin/evmmkbin: time stamp 2006-12-18 01:15:28 is 24 s in the future
    but if I check clock sync between two nodes....:
    [oracle@oracle001 ~]$ date;ssh oracle002 date;
    Mon Dec 18 01:39:33 CET 2006
    Mon Dec 18 01:39:33 CET 2006
    and from the first node
    [root@oracle001 crs]# ntpq -p
    remote refid st t when poll reach delay offset jitter
    ==============================================================================
    oracle002-priv 10.0.0.1 3 u 30 64 37 0.264 8.075 2003.55
    and from the second node:
    [root@oracle002 crs]# ntpq -p
    remote refid st t when poll reach delay offset jitter
    ==============================================================================
    10.0.0.1 193.204.114.232 2 u 17 64 377 0.652 -30.302 16212.0
    [root@oracle002 crs]#
    Please, someone can Help me?
    Thanks
    Adriano Capruzzi
    Message was edited by:
    adriano.ba

    Your 4MEM error code is indeed reporting to you that some of your RAM is not working properly (MEM = memory, i.e. RAM).
    The fix for this (replacing the RAM) is normally covered under warranty for a computer as new as yours is. To get the free warranty repair I believe that you do need to bring your computer to an Apple-certified repair center, however. If you order the RAM and do it yourself, you will need to pay for the RAM and also go through the trouble of opening your computer to access the RAM, which is not that hard to do for some people, others prefer to have a technician do that.
    I'd suggest that you have Apple do the RAM fix, if only so that the replacement RAM is covered as well going forward ...

  • HT4085 Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i record, please help

    Some videos that are taken with my iphone's camera are not making sounds, this problem occured today to all videos i recorded starting from today, please help

    It also takes time for the photos to be transferred out of your iPhone and into Photo stream on Apple's iCloud servers.
    Note that this can't happen if your iPhone is not connected to a WiFi network:
    When you enable My Photo Stream on your devices, all new photos you take or import to those devices will be automatically added to your photo stream.
    iOS devices: New photos you take are automatically uploaded to your photo stream when you leave the Camera app and are connected to Wi-Fi. My Photo Stream does not push photos over cellular connections.
    Macs: Any new photos you import to iPhoto or Aperture begin uploading automatically when you have a Wi-Fi or Ethernet connection. Or you can change your iPhoto or Aperture preferences so that only photos you manually add to My Photo Stream are uploaded.
    PC with iCloud Control Panel 2.0 or later: Open a Windows Explorer window and under Favorites select iCloud Photos if you are using iCloud Control Panel 3.0 (or Photo Stream if you are using 2.0 to 2.1.2). Open My Photo Stream. Click the "Add photos" button. Select the photos to import to My Photo Stream, then click Open.
    from here: http://support.apple.com/kb/ht4106

  • Installation Problems with E72

    Hi, My problem is basically E72 doesn't finish the installation process of new applications. I've downloaded windows live, opera mini and bloomberg. Each time it asks to install, then give license and certification info, then asks to continue and afterwards nothing happens. It does not finalize installation process. No installation file under Application Manager (except Windows Live), no new application under applications or under menu, no record under log; i.e. nothing happens. I've searched for installation files via PC suite but can not find 'em in sd card, except WL. Thinking that sth wrong with sd card, still not sure...Any Ideas?
    Message Edited by segovia7 on 27-Dec-2009 01:19 PM

    Couple of users have the same problem please check the post:
    SIS problems
    Message Edited by rukas on 30-Dec-2009 11:11 AM
    Nokia E-72

  • Software Installation Problems with Media Source and Nomad Explo

    Hello Creative Users,
    recently I had to reinstall my operating system on the PC. I have an IBM Thinkpad R30 with a Sitecom USB2.0 pccard. I am running WinXP Pro SP2 with all latest updates.
    I have a Nomad Jukebox Zen Xtra with Firmware .20.08 and an update harddri've of 80GB.
    As long as I was running the software on my previous installation everything worked fine.
    I installed the driver .26.02. This recognized the Jukebox. Musicmatch is able to communicate to the Jukebox and recognizes all files on it.
    When I installed Nomad Explorer I got an error ctregserv failed because ctin...dll is not found.
    When I tried to install Media Source from the original disk it showed an error after 30% Media Source not found. Install Media Source before continuing.
    This is what I received now with all verisons of Media Source and Noamd Explorer incl. .30.0.
    Can someone help me as synchronizing with Musicmatch is a pain.
    Thanks
    Rolf

    Hi everyone,
    as I saw many questions regarding installation problems with Mediasource or Nomad Explorer
    in this forum I will answer my own question right here. I was pointed to the answer by a friend with a similar problem on some other software.
    When trying to install the Creative software under WinXP SP2 I happens that the registration does not work. the reason are missing write attributes to the keys for
    Creative software. To correct that go to: Start, Run and enter regedit. Hit ok and you are in the registration editor.
    Find the Creative location unde HKEYS_SOFTWARE. Click right mouse button and choose
    properties.
    Check full access for your user as well the system user. click on advanced and mark both all the users you want to install from. Check the lower box below the user window sayin something about roghts being propagetd to lower folders etc. Cklick conform and ok, click confirm on previous screen and close regedit.
    Now you should be ok and able to install.
    Regards
    Rolf

Maybe you are looking for