S205 Windows 8.1 64Bit - no Wifi

Hello there,
On my S 205 I recently upgradet from Windows 8 64bit to 8.1 64bit. Now my wifi doesn't seem to work anymore. The wifi switch in the network settings is greyed out and the "hardware switch" on the right side of the laptop only seems to enable bluetooth. I tried to install the win8 drives, but it crashed my OS and i had to do a system restore.
So since there dont seem to be any win 8.1 drivers on the offical site, anyone has an idea to get wifi working again?
I dont have Power Management installed.
Thank you

try the steps outlined here:
http://ishamsaid.tumblr.com/post/54179009758/atheros-wifi-problem-in-windows-8-1
hope it works for you

Similar Messages

BootCamp fails after installation of Windows 7 Ultimate 64bit

So guys , as we know loads of people had same issue i been searching it for whole day and couldnt get any answer. First i have installed Windows XP home 32bit sp3 whole computer worked like charm. Today i have deleted xp did re partition installed Windows 7 Ultimate 64bit success but for some reason there is not Sound. no iSight and no wifi red light on sound jack. and boot camp is not working.Really can some1 help ?

thanks for replay but i dont have 3.0 i have 3.1 allready in DVD
btw : i forgot to say i have installed Nvidia remotely but not starting with windows and i did everything that i can to install but i will uninstall bootcamp and will download 3.0 then 3.1 as you said.
Thanks
Message was edited by: Mamuq

Windows 7 RC 64bit and iPhone 3gs/ iPhone not recognized by iTunes

I've had my 3gs for a about a week. After the third day it stopped syncing with my computer. ITunes (latest 64 bit version) gives the error that an iphone was detected, but not properly recognized. Is anyone else using this combination of 3gs and windows 7?

I built a new I7 920 system in May, and am using the Windows 7 RC 64bit as my OS. Even though my Iphone and my wifes 3G worked fine at first. Shortly after that about two weeks. They stopped being recognized by Itunes. I scoured the internet looking for a fix. The only one that corrected the problem was to extract the individual program executables from the Itunes64 bit setup file, by using Winrar, and then changing the Apple mobile device program to run in compatability mode. Launch it and select repair, after I did this my phones were recognized again by Itunes, but unfortunately this only lasted for a few days. Now i'm back to neither of them being recognized by Itunes again. I don't know what else to do. It would be nice if Apple could give us a leg up on this and help get these things working better.

Install Windows 8.1 64bit on a Macbook Pro Late 2008 (using bootcamp 4.0.4033)

Hi everyone, I just tried to install windows 8.1 64bit (x64) on my MacBook Pro 15'' Late 2008 (Core 2 Duo 2.4Ghz - 4GB RAM - Nvidia 9600M GT 512Mo), running Mavericks (10.9.5), and successed it with bootcamp 4.0.4033.
I installed it from scratch (new partition, no update from windows 7), in less than 1h following these very simple steps :
Step "0" :
- You'll need an two-button usb mouse plugged
- Make sure your 64bit kernel is activated by typing this line of command in the terminal :
sudo systemsetup -setkernelbootarchitecture x86_64
If you need to cancel it, simply type this :
sudo systemsetup -setkernelbootarchitecture i386
I don't really know if this activation is necessary, but I did it 6 months ago for After Effects and maybe this activation has an effect on what happens next.
Step 1 : download the contents of bootcamp 4.0.4033 on a USB key, downloadable here : Boot Camp Support Software 4.0.4033
After the download, you'll need to unzip this file in your usb key.
NB : This bootcamp only works from XP to windows 7, but it will be enough for your old-timer laptop.
Step 2 : Create a new NTFS partition on your HDD (using the disk utility)
Windows 8.1 64 bit needs at least 20GB, so I recommend a 100GB partition as a minimum for a correct running OS (the "15%" rule).
NB : Windows 8.1 will run over a NTFS partition and nothing else.
Step 3 : Insert your bootable windows 64bit 8.1 (CD or USB key).
Step 4 : Reboot your laptop, and keep pressed the Alt key just after the boot bell sound.
The OS selection screen loads. Once appeared, you can release the Alt key.
Step 5 : If your bootable device is working, the OS selection screen will display a "Windows 8.1" HDD or CD icon. Click on it and presse "enter".
Maybe you'll see a "UFI Windows" or "UFI Boot" or "UFI something...", this doesn't work.
After pressing "enter", the windows 8.1 installation process will start.
Step 6 : During the installation process, you'll have to chose the destination partition for your OS.
Select the partition you've created earlier (step 2)
Following the windows 8.1 steps are very simple.
NB : Don't forget to press the Alt key when windows 8.1 tries to restart!
Step 7 : Eject your windows 8.1 CD/usb key, then reboot holding Alt key, and select your freshly installed windows OS in the selection screen
Step 8 : After windows 8.1 is loaded, insert your usb key with Bootcamp 4.0.4033, open the "bootcamp" folder, right-click on the bootcamp setup, and click on "properties".
Select the "compatibility" tab
Check the box "run this program in compatibility mode for"
In the list below this box, select "Windows 7"
Click "Apply" then "Ok"
Now launch this boot camp setup (press "enter" or double-click)
Step 9 : Complete the BootCamp installation process, then restart (like step 7)
Don't forget to hold the Alt key after the bell sound
Step 10 : Enjoy your freshly installed windows 8.1!
You can acces your bootcamp parameters from the task bar (click on the tiny booycamp icon to open the quick menu and then click on the parameters/configurater). Here you can set your keyboard preference, your trackpad preference (multi-touch works), etc.
Following this procedure, I can use the built-in Apple-maped keyboard of my MBP. Every function keys works (Volume, luminosity, etc.)
Coming from Windows XPSP3, I was very surprised by the speed of the windows 8.1 installation (using an external USB super drive), and more surprised by this OS running flawlessly on my undying MBP!
The only issue I have is that my ethernet port isn't recognized, but it's a minor problem and i'm gonna found it quickly. I think it's due to my installation which wasn't perfectly clean (I try to run manually bootcamp 5.0.1 first, so there is some crap drivers somewhere).
So in order to confirm this procedure, i'm gonna re-install windows 8.1 from scratch very soon, because it take less time to do it (from step 1 to step 10) than write this article!
Message was edited by: Lud@l

And I used this method:
1. Install Windows 8.1
2. Download BootCamp 5 and unzip to folder BootCamp5 of a USB drive
3. Start CMD as Administrator
4. Install BootCamp 5 by entering the following commands
D: (Assuming the USB drive is assigned to letter D
CD BootCamp5\BootCamp\Drivers\Apple
BootCamp.msi
No need for InstEd might be considered by some as even more elegant as bezodziu's method

Adobe CS3 Windows 7 Pro 64bit Issues

I recently upgraded to Windows 7 Pro 64bit Edition after my system crashed.
I installed Adobe CS3 without a problem and it ran fine for a little while. Then one
day I started up Photoshop and then it just stopped working. So I decided to uninstall
it and reinstall it. When I started the installation, it halted and asked for this Adobe.dll file
so it complete. I clicked cancel and it aborted.
I have read many of the forums and they all suggest downloading a file or windows xp mode
or virtual pc.
I have downloaded the file that it needs and it still aborts the installation. I have downloaded
windows xp mode and installed it succesfully but I have no wish to use this software virtually
because it is limited in the amount of memory it can use and seems to be a bit sluggish
regardless of how much memory I allow it to have access to. I also have no access to my second
monitor.
Now that I have tried to install cs3 on multiple occasions, i now have to call Adobe so I can have
them reactive my copy. Adobe has to have some sort of work around or patch for this
because I cant forsee spending another grand for an upgrade to solve my problem.
Here is my system specs:
HP Pavilion M8530f
AMD Phenom 9550 X4 Quad-Core processor 2.2 gigahertz
7 gigabytes memory
ATI Radeon HD 5750 Video card
2 monitors
2 terrabyte hard drive

I am hoping its not because this a serious waste of having a 64 bit system if it is. do you know if this may be cause by a certain release version of cs3? i can imagine why any software would ask me to locate adobepdf.dll when it find itself on the cd. this is very puzzling. i have eliminated the video card, hard drive, and processor. frankly, i don't think i should work so hard to figure out how to eliminate a software especially when i paid so much money for it. if adobe doesn't find a solution, i guess i will have to find some other software that gets the job done without all these head aches.

Windows 7 Ultimate 64bit upgrade to Windows 8 Pro RTM 64bit hangs

I am trying to upgrade Windows 7 Ultimate 64bit on a Dell Alienware Aurora R3 desktop PC via DVD to Windows 8 Pro 64bit (RTM) and it freezes on the Windows Splash Screen after the installation and then after the restart. It looks like it has put the PC into
standby mode with the Windows logo frozen on one screen, however I cannot get PC out of 'sleep or hibernate mode' which is what it looks like it's done (flashing yellow Alienware logo).
When it happened the first time I had to manually shut it down and then restart it as the Win8 installation just stalled. After restart it said Windows 8 installation has failed and it successfully rolled back to my instance of Windows 7. I've
tried it again and it's done the same thing.
This is very frustrating as I did a clean install of Windows 8 Pro 64bit (RTM) on my Sony Vaio VGN-Z46GD laptop with no problems.
I have an Alienware Aurora R3 (only 8 months old):
Intel Core i7-2600K
8GB RAM
1.5GB Nvidia GeoForce GTX580

Just thought the Win 8 upgrade would be easy so long after launch but I am getting all of the above! I have done the following:-
Disable options: XD-Bit Capability, Intel SpeedStep Technology and Intel
C-state Tech.
http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&l=en&s=dhs&docid=586909
Override the current Intel chipset, it appears to be the issue, and run this older one (Intel Chipset Software Installation Utility, v.9.2.0.1015, A00) for now:
http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/alienware-aurora-r3?driverId=R284186&osCode=W764&fileId=2731115303
also install this: Renesas Integrated USB 3.0, v.2.0.4.0, A00
http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/alienware-aurora-r3?driverId=R286402&osCode=W764&fileId=2731116122
Still it won't reboot/come out of sleep - is there no answer from Dell/Microsoft to get this working?
Peter
Regards, Peter

My windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.

All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files.

MSI 785GM-E51 - Amount of usable RAM in Windows 7 Ultimate 64bit

Hello i have the following system:
Mobo: MSI 785GM-E51
Bios: AMI v 2.3
CPU: AMD Phenom II 955 BE @ 3.2Ghz
Memory: 2 dimms of ( KINGSTON KVR1333D3N9/2G DDR3 2GB PC10666 1333MHZ VALUE RAM ) , Total 4Gb
GPU: Sapphire Radeon X1950 Pro with 256mb RAM
OS: Windows 7 Ultimate 64bit
The specific motherboard has an onboard ATI 4200 vga. I've installed the Radeon x1950 pro from day 1 and in the bios settings the onboard vga option reads disabled. However windows 7 during install always recognize both x1950 pro an 4200 and provide drivers. In windows device manager i have the 4200 disabled. However windows display that from the 4GB of installed ram only 3,75GB is usable. Is this normal? Isn't supposed to have all my memory available since the onboard vga is disabled? And if it is disabled from start how windows 7 detect it during installation and suggest corresponding drivers ? I'm looking forward for your opinions and suggestions
Thanks in advance...

Turn memory >4GB remapping on, see your manual how to do it.
And stop bumping your message, it's NOT allowed.
>>Please read and comply with the Forum Rules.<<

Unable to open connection to MS Access 2013 .accdb file Under WCF Web Service Project Using Windows 8.1 64bit

I am encountering the following error when trying to connect to an Access 2013 database:
The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
I have Visual Studio 2013 SP3 running on Windows 8.1 64bit OS which also has Office 2013 installed (which includes MS Access 2013). My project is a WCF web service using .NET Framework 4.5.1 using any cpu as target. I have tried reluctantly
to install the older drivers as described by in the below article:
https://social.msdn.microsoft.com/Forums/en-US/1d5c04c7-157f-4955-a14b-41d912d50a64/how-to-fix-error-the-microsoftaceoledb120-provider-is-not-registered-on-the-local-machine?forum=vstsdb
and also went through the "Add Data Source" wizard in the Project menu to have the connect string automatically built. Even with the automatically built connect string I can not connect to the .accdb file from within my WCF web service.
What's odd is if I use the Database Explorer in Visual Studio it has no problem connecting the my Access file. I inspected the connect string and tried to use it as well but still get the same error. Even stranger is that I have no problem connecting
to the Access DB in an ASP.NET project on the same PC. I am also able to connect to the Access file using a simple Windows Forms application. So I'm wondering if it has something to do with trying to connect to the Access file from a WCF web service
project.
What I'd like to know is if anyone has been able to get this to work in an environment as I described above as a 64bit WCF web service project? I tried to switch my project to 32bit but when I do I get a different error which reads:
System.BadImageFormatException: Could not load file or assembly 'file:
Almost to the point of trying to get this web service project done with SQL Express but would like to know if it can be done with MS Access 2013. Any information anyone can provide to help me get past this issue is greatly appreciated. Thanks.

Have you installed the 64-bit Access driver on your machine? See
Data Source Names and 64-Bit Operating Systems for the differences in odbcad32. Call %SystemRoot%\system32\odbcad32.exe to check the drivers.
How do you host your service? Stand-alone or IIS or embedded to another application? Keep in mind that IIS7 runs it in its application pool which is defaullt 64bit. Thus the bad image exception, when compiling your service as 32bit.
When you need the Access database for your service to store informtation, then I would switch to SQL Server (Express) or XML files depending on your actual needs.
Also check whether your account under which your service is run has the necessary NTFS file permissions on the access file and the folder. This is getting even more complex when it's a remote folder.

HP Officejet 4500 All-in-One Printer - G510g installation windows 8.1 64bit

After operating a HP Officejet 4500 All-in-One Printer - G510g from both an old Windows XP notebook and from an ASUS Windows 8, 64bit laptop, subsequently updated to 8.1; I'm now trying to install it to run from a Toshiba Satellite NB10T-A notebook Windows 8.1 64bit, but without success.
The original installation CD does not provide an installation but on start up (presumably because it is only compatible with Windows XP and 7.
The www.hp.com site offers a download of a full driver for the printer, forWindows 8.162bit. This seems to download fine. The file unpacks, says it is installing, but on completion the driver is not available.
There are no options to uninstall, either in control panel/printers or in control panel/software.
Without the driver, the Windows 8.1 system recognises the printer and allows simple printing ffrom applications. However, it is not possible to use the scan options, giving the error message that the driver is not available. Neither HP Solution Center or HP Document Manager are installed.
I have tried HP Print and Scan Doctor. This recognises the printer on USB link, says that there are missing drivers, downloads, unpacks and installs drivers. But the printer icon in control panel/printers continues to have an alarm icon and indicates that the printer is still missing drivers.
I have also tried the HP Printer Installation Wizard. The result is similar.
Please advise how I can install the scan options of this equipment and confirm that the machine is compatible with windows 8.1 64bit.
Thank you
This question was solved.
View Solution.

Hello @monc , welcome to the HP forums!
I read through your post about how you cannot scan on your Windows 8.1 computer as the driver and software doesn't seem to be completing successfully on your system. However, you have been able to install the printer and its functioning fine on other computers.
I would suggest checking the Control Panel to see if there are any printer files to uninstall: Uninstalling the Printer Software
Restart the PC afterwards
Perform a Clean Boot
Restart the PC again
Download and install the printer again: HP Officejet Full Feature Software and Driver
If you see any error messages or codes during the installation process, make note of the exact problem or error and post me back a screen shot or the details.
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Where are the drivers for HP LaserJet 5P for Windows 8.1 (64bit)?

Had been using HP LaserJet 5p printer with HP LaserJet 5p printer driver, but had printer disconnect for a few months due to not have black toner. Now I want to use the printer and my control panel does not show HP Laser 5p printer for my tablet but shows it for my laptop. I can not find the driver on the HP support list and the support list does not recognize HP LaserJet 5p.
Where are the drivers for HP LaserJet 5p for windows 8.1 (64bit)??????

Hi,
Basic print drivers are available for the HP Laerjet 5P via Windows Update.
Follow these steps to install the printer drivers on Windows 8.1:
http://h20564.www2.hp.com/hpsc/doc/public/display?docLocale=en_US&docId=emr_na-c03470332#N100AA
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Crystal Report 2008 on Windows Server 2008 64bit

hi,
I tried to run a Crystal Reports Web Application on a Windows Server 2008 64bit but I got this error:
"Bei der Erzeugung des Reports ist ein Fehler aufgetreten.
Der Typeninitialisierer für "CrystalDecisions.CrystalReports.Engine.ReportDocument" hat eine Ausnahme verursacht.
CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: Fehler beim Versuch, die Crystal Reports-Laufzeit zu laden.
Entweder reichen die Berechtigungen des Crystal Reports-Registrierungsschlüssels nicht aus, oder die Crystal Reports-Laufzeit wurde nicht ordnungsgemäß installiert.
Installieren Sie die geeignete verteilbare Crystal Reports-Datei (CRRedist*.msi), die die erforderliche Version der Crystal Reports-Laufzeit (x86, x64 oder Itanium) enthält. Weitere Informationen erhalten Sie unter folgender Adresse: http://www.germany.businessobjects.com/support/default.asp.
"Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.LoadSaveReportException: An error has occurred while attempting to load the Crystal Reports runtime.
Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required. Please go to http://www.businessobjects.com/support for more information."
The System:
- Windows Server 2008 Standard 64bit SP2
- Microsoft .NET Framework 3.5 SP1
- Oracle Client 10gR2 64bit
- I tried Crystal Report 2008 Runtime, Crystal Report 2008 Runtime SP1, Crystal Report 2008 Runtime SP2, Crystal Report 2008 Runtime SP3.
- Crystal Report Basic Runtime for Visual Studio 2008 (x64)
On a 32bit-system or 32bit-mode (and 32bit Oracle Client) everything is working fine. But I have to use the 64bit Oracle Client, therefore, Crystal Report have to work in 64bit-mode.
Is it possible and what is to do to get it working, thanks,
Martin

It does work on 64 bit OS - as a 32 bit application. CR 2008 is 32 bit only.
See the article [Crystal Reports support of 64 bit Operating Systems|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e] for more info.
Ludek

Some issues after clean installing windows 7 pro 64bit

Hi,
I have a couple of issues, I clean installed windows 7 pro, 64bit, (vanilla) restored my license with ABR and used system update to download all the drivers. (no issues until here) But after restarting the system, I found this issues:
1. I have to put the bios in legacy mode for system to boot. Otherwise it gives me a "no operating system found" message. Is there any way to make a proper installation for the system to boot in UEFI and LEGACY?
2. System update didn't install thinkvantage center. (the program that stays in the taskbar). Should this be installed manually? Or system update should have installed it?
3*. I can not use lenovo driver page of my x120e. In IE it shows me repeatedly the wizard to choose my model, although I enter the correct info there. It starts all over again and again. Tried opera, I can see the drivers page, but I can't browse, or expand none of the sections. (all I can think of this, do I need java for the page to work?)
3*. UPDATE: After installing IE 9, java and flash player, still not working. Opera too. Google Chrome works fine. What's the matter with IE and OPERA? What component do I need to make IE work with lenovo drivers download page?
Can anyone help me? Never had to deal with these issues.
Thanks in advance
I'm just a volunteer. I like to help others where I can. Do my ideas work? I hope so. o_O
Who helped you today? Do not forget to thank him.
My hardware: TP x120e 0596-2ru. Windows 7, sp1, 64Bit, English, installed in UEFI mode.

Hello,
Have you tried wiping the hard disk drive and reinstalling Windows 7 Professional x64 from the factory recovery discs while the BIOS is set to UEFI? If so, did that work?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

LaserJet M1120 MFP + Windows 8.1 64bit - cannot find drivers for scanner

I have a new notebook with Windows 8.1 64bit and a LaserJet M1120 MFP multifunctional. For printing is OK, it found plug and play driver and I am able to print. For scanning, I couldnt find drivers. Please help! Thanks...

Hello Gabitza,
Welcome to the HP Forums!
I understand you're unable to find a scanning driver for the Laserjet M1120 MFP. I will do my best to assist you! There isn't a full feature software available, just a plug and play driver. As a workaround, you can use another program to scan a document.
Please follow this HP document on How to Scan: Windows 8. Click on how to scan without HP software and there is four programs to try. Let me know if you are able to scan a document.
Have a great a night!
I worked on behalf of HP.

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

S205 Windows 8.1 64Bit - no Wifi

Similar Messages

Maybe you are looking for