S205 - WinXP - correct driver installation order?

Hello,
I've managed to set up my S205 with WinXP SP3, but 3 issues occured:
- Bluetooth didn't work
- the Webcam didn't work
- the system froze after I tried to carry the S205 netbook around
I searched around in this forum and found out that other S-class netbooks need their xp drivers installed in a specific order to function properly.
After playing around with the drivers I managed to get the blue screen of death and needed to reboot 10 times to get past him. I think it would be best to wipe the system partition and reinstall XP and all drivers in the correct order...
... if there is one?
Thanks for your help in advance!
Alex
Solved!
Go to Solution.

try to remove/re-install webcam drivers. for bluetooth, press fn + f5 to activate bluetooth ( switch the wireless button first )
( also you may need to re/install power management - make sure utility checked - )
can you check if the issue persists on safe mode?

Similar Messages

Need correct Win 7 driver installation order for Satellite P500/01G

Hi,
I have a Toshiba Satellite P500 and had to replace HDD after it was dropped by son.
I dont have the recovery disc so i loaded Win 7 from image on USB.
I down loaded all the drivers but have been frustrated by a few things.
The webcam seems to be impossible to get working despite trying every fix i could find online and some devices unkown in device manager.
The Toshiba site lists multiple audio,display and wireless cards wgich makes it hard to know the correct driver to install.
I needd a correct driver list and the order they should installed in
Model is Satellite P500/01G (PSPGSA-01G003)
windows 7 32 bit
Cheers

Hi
I have Satellite P500 too and Im really satisfied with it. I hope you are also happy with your machine.
To be honest I think you should use it with original Win7 64bit version.
As I can see you have an Australian model. I have UK model but I think installation order must be the same. So here it is:
Windows 7
Intel Chipset SW Installation Utility
Intel Management Engine Interface
Display Driver
Intel Turbo Boost Technology Driver
Intel Rapid Storage Technology Driver
TOSHIBA Supervisor Password Utility
TOSHIBA HW Setup Utility
TOSHIBA Value Added Package
Card Reader Controller
NVIDIA HD Audio Driver
Conexant Audio Driver
Wireless LAN Driver
Synaptics Touch Pad Driver
TOSHIBA HDD Protection
Bluetooth Stack for Windows by Toshiba
LAN Driver
YUAN DVB-T/ATSC Tuner Driver
TOSHIBA USB Sleep and Charge Utility
TOSHIBA Face Recognition
TOSHIBA eco Utility
TOSHIBA HDD/SSD Alert
TOSHIBA Service Station
HDMI Control Manager
TOSHIBA Remote Control Manager
TOSHIBA Fingerprint Utility
PatchFiles FixFPService_REG_1.0
ConfigFree
TOSHIBA Assist
TOSHIBA Web Camera Application
TOSHIBA Extended Tiles for Windows Mobility Center
TOSHIBA Folder Migrating Utility
PatchFiles
If some listed driver is not available for download just continue with next one.
Good luck

Satellite L500-13W - Which driver installation order on Windows 7 32bit?

hi
I have Satellite L500-13W and install Windows 7 32bit. I download all drivers.
Which installation order for my model?

Installation order must be the same or similar as Vista install order.
Windows 7
Intel Chipset SW Installation Utility
Intel Matrix Storage Manager
Audio Driver
LAN Driver
Card Reader
TOSHIBA HW Setup Utility
TOSHIBA Supervisor Password Utility
TOSHIBA Flash Cards support utility
TOSHIBA HDD_SSD Alert
TOSHIBA SD Utilities
TOSHIBA Assist
Display Driver
TOSHIBA Value Added Package
TOSHIBA Software Modem
Wireless LAN Driver
Touch Pad Driver
Bluetooth Stack for Windows by Toshiba
TOSHIBA Face Recognition
TOSHIBA eco Utility
TOSHIBA Service Station
TOSHIBA PC Health Monitor
ConfigFree
TOSHIBA Web Camera Application
I hope you will be able to install all this stuff and also hope you will be happy with Windows 7.
If you have more questions you are welcome.

Windows 8.1 Driver Installation Order G510

Hi,
I was wondering if someone could tell me the proper order in which to install the Drivers for Windows 8.1
Im using Lenovo G510 ( i5 4200M, Switchable Graphics Intel HD 4600 & AMD Radeon HD 8570M)
My current order is:
1. Intel Chipset
2. Intel Rapid Storage
3. Intel Management Engine
4. Intel Video
5. AMD Video
6. Audio
7. Lan
8. Realtek Card Reader
9. WLAN
10. Touchpad
11. Bluetooth
12. Camera ( Not applicable because Windows 8 & 8.1 Already have that, installation says no capable hardware found)
13. Lenovo Energy Management ( Currently using G510s Touch's because mine doesn't have a windows 8.1 version)
I have experienced that even when I have installed the latest drivers ( Realek card reader in particular), Windows still shows a message in action center to install the latest drivers.
Dell had an official post on installing order of drivers. I want to if it is different from Lenovo.
I feel like Lenovo Energy Management and Realtek card reader drivers should be installed right after INTEL Chipset.
Feedback?

Unlike Dell, Lenovo doesn't really have anything documented on the order in which to install the drivers after a clean install of the operation system. Unless one of the moderators know of an obscure listing somewhere. Unfortunately, the documentation for your model is further limited as it only lists the use of the recovery disks which isn't helpful in your situation.
When I do a clean install I tend to rank the driver installation in order of importance. First installing the drivers that are needed for the basic operating of the machine and from there move on to the lesser important peripherals. From the looks of your list, it would appear you have done just that and that would be the order I would use.
In regards to the Windows Action Center Message, there is quite possibly an newer driver version available on the Windows Update website. After your installation of the drivers I would visit the website and review their list for any driver updates. I would then select just those for download and install. Once all the drivers are up to date then I would revisit the website for the other OS updates they have to offer.
Owner & Operator of the following:
● Lenovo Ideapad Z570 w/ Win 7 & Win 8.1 Dual Boot ● Lenovo Yoga 3 Pro w/ Windows 8.1 ● Toshiba A75-S206 w/ Win 7
● IBM Thinkpad T-23 w/ Win XP ● IBM Thinkpad T-22 w/ Win XP • As well as multiple desktops dual/triple booting XP, Vista and Win 7.
★ Find a post helpful? Thank that member by clicking on the ☆Star☆ to the left awarding them a Kudo.
★ Posting a problem and a reply is helpful and it answers your question, please mark it as an "Accepted Solution"
★ I'm not a Lenovo employee, just a volunteer geek who likes to help folks. Enjoy your time here, pay it forward by helping others !
★ Sorry, I don't answer questions via Private Messages. Posting in the appropriate forum is the best way to get assistance.

Satellite L670 - Is there any driver installation order for the Win XP

Hi!
I own a Toshiba satellite L670 model.
I want to install Windows XP (32 bit) and i wanted to ask if there is an installation order for the laptop drivers (which goes first , second etc) after the Windows Installation. I can't find anythink about it from Toshiba Corp.
Thanks in advance!

Well, usually you should proceeds with the common drivers like graphic card driver, chipset driver, LAN, WLan driver, touchpad driver, card reader controller, etc
After that I recommend following with Toshiba software like Controls driver, Controls, Hotkey Utility, Power Saver Driver, Power Saver, etc
On the right you can find More Info. There you will find details about each driver, software
Greets

G500 drivers installation order on Windows 7

Hello,
I just bought this laptop, a G500, model name: 20236 and model number CB03103187.
LENOVO ESSENTIAL G500H 59-395372 15.6'' INTEL CORE I3-3120M 4GB 1TB AMD RADEON HD8570M 1GB FREE DOS
With no windows.
It came with free dos on it. Which is just fine.
I would like to use my own new copy of windows 7 64-bit.
I will download the drivers from here:
Drivers and software - Lenovo G500 Notebook
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS035531
Is there a particular driver installation order ?
I am thinking of doing it in thisorder:
-Windows 7
-windows 7 SP1
-BIOS
-chipset
-amd video
-audio
-usb device
-blue tooth
-atheros LAN
-WLAN
-camera
-card reader
-touch pad
-power mgmt
Do i need these drivers?
-intel video drivers
-intel mgmt engine
-intel rapid storage
Thank you in advance,
Gus
Solved!
Go to Solution.

Hello Gus,
There is no particular driver installation order. I personally firstly install Chipset then Display/Video drivers and after that everything else. Since you have AMD RADEON HD8570M in your machine, you do not have to install the three additional Intel drivers.
Microsoft Certified IT Professional (MCITP)

Qosmio F50 - Driver Install order on Vista 64-bit

Hello
I have a notebook Qosmio F50-10M with vista 32-bit home premium preinstaled.
I bought a new Operating System Vista ultimate x64. I want to make a fresh reinstal But i now also is VERY important the driver installation order to have a perfect result.
Can Somebody help me?
Sory for my bad English.

Hello
I have installed Vista 64-bit on friends Qosmio F50 successfully and here is installations order:
Windows Vista SP1 64bit
Chipset driver V8.7.0.1007
Storage Manager
Display Driver nVidia
Sound Driver
Network Driver
Touchpad Driver Alps
or
Touchpad Driver Synaptics
Card Reader Controller
Modem Driver TOSHIBA
Modem Region Select Motorola V2.2.3.x
WLAN Driver Intel
or
WLAN Driver Atheros
or
WLAN Driver Realtek
Webcam driver
Bluetooth Stack 64bit
Infrared Driver
TV Tuner
Value Added Package
Hardware Setup
Password Utility
FlashCards Support
Fingerprint Utility
Config Free
WPS Library
Assist
Dolby Control Center
Acoustic Silencer
TOSHIBA DVD Player
TRS Driver
HDMI Control Manager
TOSHIBA Gesture Controller
FaceRecognition
Good luck!

Broadcom bluetooth drives installation failed, no bluetooth device was detected.

hello, i have HP Pavilion dm4-3013cl Entertainment Notebook PC laptop.and i am trying to install BROADCOM BLUETOOTH DRIVERS in my laptop and i am getting this error that no bluetooth device was detected. please make sure that your bluetooth device is plugged in properly in order to countinue installation. now i want to say that i lost my recovery disc and after while for heating issue my main hard disk break or not working condition so i just replace hard disk and ofcourse i dont have os so i install fress windows 7 ultimate 64bit in my laptop. and install each drivers provide by HP website i downloaded all drives and installed and my windows 7 is also up to date. i search for this issue allmost one week for solution but cabt fix and i come to know that before insalltion of BROADCOM BLUETOOTH DRIVERS i have to enable bluetooth in HP WIRELESS ASSISTANCE but in my case i think i cant find due to new disk and new os. i can send file or recieve with bluetooth can paired with my all smartphones too but cant listen music in head phones. cant access LISTEN TO MUSIC, i know the reason is only this drivers is not installing properlly and i want to fix it. now i a tired and i dont have time to search and fix it so please help me out from this issue please and sorry for my poor grammer.

fixed !!! now i come to know, the problem is drives which i update it from intel websites, paul you suggest me correct driver for my bluetooth but it is allready in my laptop which i updated before but again i download and install and nothing happen then i reformate laptop and again install all drivers which i downloaded from hp website for my laptop and again update all drivers manually and automaticallu both from intel website and intel utility drivers software and update windows too and i got same problem. cant hear music from bluettoth head phone, so again i reformate laptop but this time i just installed drivers which listed from hp website, i didnt update anything and as you said i didnt install broadcom bluetooth drivers because it is not for my laptop so then i connect my blutooth and try to access listen to music and o m g. it works now i can hear nusic form bluetooth, i dont believe this. but yes it works this forum help other also so thanks paul and have a nice day now i newer going to update my drivers... in pic you can understand that i am not using latest version of bluetooth drivers.

SoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot

NSoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot4 I recently moved my X-Fi Elite Pro soundcard to a different PCI slot to accommodate my new large PCIE graphics card.
Prior to moving the card, my?original SoundBlaster install went fine without any trouble. When I booted up after relocating the card,?it was not detected at all. So I uninstalled my SoundBlaster driver software and?rebooted the computer?thinking that was necessary to clear any hardware configuration settings from the old install. This made no difference. I then discovered my card was not seated properly and corrected it.
Next I installed the SoundBlaster driver software. The installation proceeded and finished with a request to restart the computer. Once I did, the computer detects my card and starts the hardware installation wizard asking if I want Windows to search online for driver software. It does not recognize the just installed SoundBlaster driver installation. I have a dual boot setup and this happens in both WinXP Pro and Vista 32 Home Premium.
What's wrong here?

Forget it folks...couldn't wait for any suggestions so I just cleaned off my hard dri've and reinstalled everything. Works fine.

I need WinXP audio driver for Pavillion DV6599ee

Hello.
I installed WinXP on my Pavillion DV6599ee but I can not get the correct audio driver for this laptop.
Can someone please give me a link for the correct WinXP audio driver for Pavillion DV6599ee?
Thanks.
This question was solved.
View Solution.

XP drivers from V6700TX will work for your model. Install Intel Chipset Installation Utility for ICH8 first and reboot before other drivers.
(see below also before continuing with other drivers):
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=228&lc=en&cc=us&lang=en&dlc=en&product=3651452
Don't use Mobile Intel 965 Graphics ,you have Nvidia Graphics:
http://tinyurl.com/2q6ss4
Some of the drivers above require .Net,MS UAA and Windows Installer 3.1 first.
MS UAA(required with a reboot before Realtek audio):
http://www.mediafire.com/?4ben9zlesng
.Net Framework(before Quick Launch):
http://tinyurl.com/758p8
Windows Installer 3.1(before Intel wireless):
http://tinyurl.com/9cg2y
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

K8N Neo Platinum driver installation

There are 4 downloadable mainboard driver zips at MSI for K8N Neo Platinum (not including BIOS a upgrade) -
1. NVSA020.zip - SATA controller drivers
2. NF3_CK8S.zip - Chipset drivers including:
Ethernet NRM driver
Network management tools
GART driver
SMBus driver with updated uninstaller files
*Win2K IDE 2.6 driver with updated uninstaller files
*WinXP IDE 2.6 driver with updated uninstaller files
3. USB2W9XME009.zip - USB 2.0 drivers
4. ALC69.zip - onboard Realtek audio drivers
*applicable version of Win OS
Are ALL these drivers from MSI to be loaded?
I think I read in some other posts where some of these drivers (?) cause problems and therefore default Win OS (or chipset manufacturer) drivers should be used instead. Is there a concensus (or list) of which drivers should or shouldn't be installed and the correct procedures and order for doing it?
Perion
[Soon to build]
MSI K8N Neo Platinum
AMD 64 3200+
Corsair Value Select Mod# VS1GBKIT400
--> 1G(512MBx2) DDR PC-3200 CAS Latency 2.5
Western Digital 120GB 7200RPM SATA Hard Drive, Mod# WD1200JD
ATI RADEON 9800PRO 128M
Thermaltake Gaming Tower XaserV Series Mod# V7000+
--> Case Fans: 2 x 80mm, 3 x 90mm
ENERMAX 460W PSU Mod# EG465AX-VE (W)FMA
--> 3.3V@35A, +5V@35A, -5V@1A, +12V@33A, -12V@1A, [email protected]

Quote
Originally posted by Perion
There are 4 downloadable mainboard driver zips at MSI for K8N Neo Platinum (not including BIOS a upgrade) -
1. NVSA020.zip - SATA controller drivers
2. NF3_CK8S.zip - Chipset drivers including:
Ethernet NRM driver
Network management tools
GART driver
SMBus driver with updated uninstaller files
*Win2K IDE 2.6 driver with updated uninstaller files
*WinXP IDE 2.6 driver with updated uninstaller files
3. USB2W9XME009.zip - USB 2.0 drivers
4. ALC69.zip - onboard Realtek audio drivers
*applicable version of Win OS
Are ALL these drivers from MSI to be loaded?
I think I read in some other posts where some of these drivers (?) cause problems and therefore default Win OS (or chipset manufacturer) drivers should be used instead. Is there a concensus (or list) of which drivers should or shouldn't be installed and the correct procedures and order for doing it?
1. NVSA020.zip, these drivers come in a diskete with your mainboard as well but possibly on an earlier version. You will need these if you plan to use a SATA Raid/ or simply a SATA drive when installing your OS of choice. Please note that if you plan to use a single SATA drive use SATA 3 or 4. In this case the drivers are not necessary but rather optional.
2. These are the nforce platform drivers. You can either use the ones off the msi site or the ones from nvidia's site. In any case i would suggest you replace the IDE driver package with the 2.5's -> http://www.nvidia.com/object/nforce_ide_4.15_win2KXP.html
3. if you plan updating to a sp 1 or 2 versionof xp, you will probably not need these.
4. ALC69.zip - > Here is the latest realtek drivers.

Creative Sound Blaster Audigy ZS And Vista Driver installation prob

HI!
I encounter Installation problems with that file:
Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
Thanks!
Julien

estebandit wrote:
Is there a known issue for this
Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
SBAX_PCDRV_LB_2_8_000.exe
Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
Requirements:
Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
whereas the correct driver shows the following,
This download supports the following audio devices only:
Creative Sound Blaster Audigy including Platinum and Platinum eX series
Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

Stream 14 Driver installation Issues on Windows 7

I am wierdly struggling with something I have done countless times before with other laptops - remove Windows 8 and install Windows 7 I've so far disabled Secure Boot, Enabled legacy support, removed all hard drive partitions and installed Windows 7 which has gone on without issue, the problem is the driver installation. I (as always) download the drivers from: -a) The PC manufacturer if present (not in this case)b) Direct from the hardware vendor I do not use driver download software (trust issues) The first problem driver is the AMD chipset driver, I have downloaded the Catalyst driver many times and yet each install does not actually install any usable drivers (v14.12) which lists the chipset as supported OK, I'll download the broadcom driver for the inbuilt wifi, this was confirmed by the VEN and PID numbers however despite downloading the correct broadcom driver it did not install the wifi device. I thought OK, i'll add a wifi dongle and use that to triple check I have the right chipset driver by using their auto detect feature. However the same problem has occured, I checked the VED and PID number against realteks drivers to find the right one but it will not install this either. This has, at the moment, left me with a HP Stream 14 with Windows 7 and no drivers and no internet connection to use driver dectection. Note: drivers downloaded and copied onto Stream 14 using my PC. Any Thoughts?

Hey, tsumbled upon your thread googling for the same thing. Changed OS from Windows 8.1 to 7. Managed to install USB3 driver, by installing AMD Chipsets drivers from AMD's site, the latest ones should work. Chipset driver also installs support for HDMI Audio, SM Bus, SATA, PSP. I also had problem installing graphics driver (Radeon R3), the latest Catalyst drivers (15.7) weren't working (the .inf file didn't contain needed DEV_9854). But fortunately the Latest Windows Beta driver (15.6) from AMD did work. Broadcom BCM43142 Wifi driver, I downloaded from HP - http://h20566.www2.hp.com/hpsc/swd/public/detail?idx=2&swEnvOID=&action=driverDocument&itemLocale=&swLang=&swItemId=ob_133353_1&mode=4 For the rest, Windows 8.1 drivers worked.

ATI Xpress 1250 Catalyst 9.3 Driver installation problem

I have an ATI Xpress 1250 Radeon integrated graphics card on my laptop.
The v9.4 drivers from the AUR crash my X and hangs with no keyboard/mouse interaction.
The ATI driver website said the card required the 9.3 drivers which when installing gave this error:
http://support.amd.com/us/gpudownload/l … ng=English
[08:54][utils]$ sudo sh ati
ati-driver-installer-9-3-x86.x86_64.run atidriver/
[08:54][utils]$ sudo sh ati-driver-installer-9-3-x86.x86_64.run
Created directory fglrx-install.wdkccU
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.593...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core:/home/chillu/bin/:/home/chillu/bin/)
Error: ./default_policy.sh does not support version
default:v2:i686:lib::none:2.6.29-ARCH; make sure that the version is being
correctly set by --iscurrentdistro
Removing temporary directory: fglrx-install.wdkccU
Help!

tealson wrote:
I'm not quite sure, but the ATI Xpress 1250 may have been dropped from the driver support list. AMD/ATI changed a few things there back one month or so.
Apart from this you should not try the driver from amd but test this one from aur: http://aur.archlinux.org/packages.php?ID=25105
Thank you!!
That was exactly what I wanted to know!
I was using the catalyst 9.4 drivers in the AUR and was searching for the legacy drivers from the AUR.
Thanks again! Will try and post the results.

S205 - WinXP - correct driver installation order?

Similar Messages

Maybe you are looking for