S206 wiht a simple HDMI to VGA Adpater is it possible?

It it possible to switch in the HDMI analog Modus with the S206 to use this cable ? Thx 4 answer.  http://www.amazon.de/HDMI-Kabel-Videokabel-Adapterkabel-Anschlusskabel/dp/B002F44MJE/ref=sr_1_1?ie=U...

hi spaule,
it should work.

Similar Messages

  • Does the pavilion x2 support hdmi to vga (d-sub) output?

    I purchased a display to connect my laptop to. However, the screen only supports d-sub input, and my pavilion x2 only supports hdmi output. I looked into purchasing an hdmi to d-sub chord, but I found that your device must support hdmi to d-sub. I would like to know if this is supported

    Hi, HDMI to VGA is from digital to analog. You need a proper coverter, simple HDMI to VGA cable won't work.    http://www.jaycar.com.au/Sight-%26-Sound---Home/AV-Switchers-%26-Converters/Converters/HDMI-to-VGA-%2B-Stereo-Audio-Converter/p/AC1724 Regards.

  • HT3235 HDMI to VGA Adapter

    Just checking if anyone can suggest what adapter would be suitable for HDMI to VGA Adapter, I'd love to connect two old HDMI to VGA monitor displays if possible as I have spare monitors and could use the facility.

    Belkin HDMI to VGA doesn't work for me. Fliking screen on rMBP and no input signal on monitor. Connecting directly HDMI to big screen TV works fine. Connecting another source of HDMI signal, say, Dell notebook with the same Belkin HDMI to VGA adapter - works fine.
    Seems like rMBP output to HDMI has not enough power to go through additional intermediate device. Shame.

  • Hdmi to VGA issue

    I use an HDMI to VGA converter to an external monitor. Recently the external monitor began to flas off and on periodically, and then completely went blank. Tried rebooting, and a second vga monitor with the same results. Purchased a new adapter as well and at first it semed to resolve the issue, but then it returned.
    I turned the Laptop off overnight, and restarted, and the external monitor began working again.
    That night left the LT go into sleep mode overnight, and when woke the LT the next morning the external display again did not recover.
    Turned the LT off again and let it set for about an hout. Turned back on and the external monitor now works again.
    I've reset the power options to nev ?er turn the monitor off, but let the LT go into sleep mode to attempt to determine where the issue is.
    Not sure if it's heat related or sleep mode related.
    Warranty expires in August so want to get to the bottom of this if possible.
    Suggestions?

    Hi there @Spark_Ric 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are trying to use an HDMI to VGA converter to connect to an external monitor. I am happy to help you with a direct HDMI connection, to an HDMI device to test the functionality of the HDMI port. Beyond that I cannot troubleshoot an HDMI-VGA adpater that may not be compatible.
    If possible do you have an external HDMI device you can connect to, and test with, or if you prefer as you say you are in warranty, you can try calling our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    Again, it is likely that phone support will want to eliminate the adapter from the chain and test with a direct HDMI connection to verify the HDMI port.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Ideapad S400 Touch - HDMI to VGA problem

    Hi,
    I need to connect Ideapad S400 Touch to projector which has only VGA input. Therefore, I've bought such converter:
    http://www.amazon.com/Black-Input-Adapter-Converter-Laptop/dp/B007KFVQXI/ref=pd_sim_e_4
    Unfortunately, whatever I connect through it (projector, tv, PC monitor) I always have no signal...
    I tried HDMI direct connection toTV - works
    I tried HDMI to DVI converter and connect to PC monitor - works
    but when I use HDMI to VGA like one mentioned above - always "no signal"
    Please help. I bought this laptop and now find it useless as I present on beamers very often and am completly stacked now...
    Any suggestion would be highly appreciated!
    Thanks!

    hi ro174748,
    Welcome to Lenovo Community Forums!
    The connection you need is a active coverter.
    Passive connection just passes the signal and relay the signal without converting it.
    Active connection converts the signal and relay it to the other end.
    HDMI send / recieve digital Signal while VGA send / recieve analog
    Your corrent covertion will not work if the device cannot recieve digital signals through VGA.
    You will need an active converter such as this
    http://www.newegg.com/Product/Product.aspx?Item=N82E16812400359
    HDMI to DVI operates with Digital signal so no covertion needed, that's why it worked.
    Here is a simple discussion about this issue.
    Hope this helps
    Cheers!
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • I bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.\\\\\

    i bought a mini DVI to HDMI convertor and  a HDMI to VGA cable to connect my mac book pro to a tv but it doesn't work any one can help.

    I would suggest looking into a Thunderbolt to HDMI connector. In this case, you may be able to use the TV as an external monitor. For this option, please confirm through additional research. I have not tested it personally.
    You can also use an Apple TV, which connects with HDMI. In this case, you can use Airplay Mirroring. Not all Macs support Airplay Mirroring, so you need to check first. I have a Mid-2011 27" iMac, and it supports Airplay Mirroring. I don't use it often because my TV is in another room, but I just tried it and it worked. It had to change the screen resolution to work well, so I don't know if I would want to use it as my day to day monitor. http://support.apple.com/kb/ht5404

  • How to connect an external display to MacBook Pro Retina using HDMI to VGA Adapter?

    I have a Macbook Pro Retina Late 2012 model and I want to connect my LG 19EN33s Monitor to it using HDMI to VGA cable. Can someone please help and let me know how it can be done?

    Something like this -> http://www.monoprice.com/Product?c_id=101&cp_id=10114&cs_id=1011404&p_id=6191&se q=1&format=2 - from MonoPrice may work.
    Clinton

  • Mac mini hdmi to VGA

    On my Mac mini, I have been using thunderbolt to VGA for a monitor & it works fine. I would like to add a second monitor. I bought a hdmi to VGA but when plugged in, there is no picture on the second display and the first display blinks off & on. Am I wrong in thinking this should work? How else would I get the second display?

    From:
    http://support.apple.com/kb/HT4214
    Can the HDMI port drive analog displays (VGA displays for example) using adapters?
    No.  The HDMI port will drive digital connections—such as DVI—using the adapter that came with the Mac mini, but cannot be used for analog displays such as VGA. You can purchase a Mini DisplayPort to VGA adapter separately to drive analog displays.
    If yo really need ton use two VGA monitors yo willneed a UBS video adopter
    http://www.kensington.com/kensington/us/us/p/1505/K33974AM/universal-multi-displ ay-adapter.aspx#.UxSD9_mwKBo
    or
    http://www.kensington.com/kensington/us/us/p/1505/K33974AM/universal-multi-displ ay-adapter.aspx#.UxSD9_mwKBo

  • AppleTV 2g connected to HDMI to VGA adapter

    I connected my AppleTV to my TV via a HDMI to VGA adapter. On power gives no signal and display a message "Out of Range", to connect another device with the same adapter works properly.

    OK, thanks. Just one question.
    I could get the Kanex ATV pro in Mexico, because the adapter I have now cost me much to get it, and almost not many options.

  • HP HDMI to VGA Adapter

    I bought the HP HDMI to VGA adapter to use on my Windows 8 ultrabook. It does not work and nothing shows on the second monitor/ projector (reminas black as if no signal is received in the projector). I have tried all the usual tweaks and I know how to connect to a second screen.
    Is this adapter not compatible with Windows 8? if so is there a fix that I can download to get it to work?
    It was very embarrassing to try and use this in a corporate presentation and it failed.

    Yes an HDMI to VGA adapter will work fine. Keep in mind it will not carry audio but neither did your old vga connection so I am assuming it is not a problem. 
    You would find an HDMI to VGA at any Best Buy or you can order on one amazon.com such as here:
    http://www.amazon.com/BestDealUSA-Adapter-Converte​r-Laptop-NoteBook/dp/B007PLL4CK/ref=sr_1_2?ie=UTF8​...
    Connect the projector and use the Windows key at the lower left of the keyboard and the p key at the same time and it brings up a "projector" console that lets you easily switch from laptop to projector to laptop + projector. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • I cannot get my monitor cable to fit in the hdmi to vga adapter

    Hello
    I was wondering if anyone is having the same issue as me.  I'm trying to plug my new mac mini into my Dell flat screen monitor.  It doesn't seem to fit my HDMI to VGA cable so I'm assuming that my cable is in fact a DVI?  The cable is actually a little too big for the VGA adapter and no spots for the screws.  If anyone could help me further I'd really appreciate it.

    Hello, what does the connector on the Monitor & Cable look like?
    VGA & DVI...

  • HP Slate 500 and HP HDMI to VGA Display Adapter (NP031AA)

    The specifications page for the HP HDMI to VGA Display Adapter (NP031AA) (Link) doesn't list the HP Slate 500 as a compatible device in the campatible products list (Link).
    Do these two products work together?
    What VGA resolutions can I project using this cominbation of products?  Am I limited to 1024x600? or 1024x768? or does it support displaying higher resolutions?
    I'm thinking about making a purchase but I don't want to get the adapater if it isn't going to work.
    Thanks,

    Yes an HDMI to VGA adapter will work fine. Keep in mind it will not carry audio but neither did your old vga connection so I am assuming it is not a problem. 
    You would find an HDMI to VGA at any Best Buy or you can order on one amazon.com such as here:
    http://www.amazon.com/BestDealUSA-Adapter-Converte​r-Laptop-NoteBook/dp/B007PLL4CK/ref=sr_1_2?ie=UTF8​...
    Connect the projector and use the Windows key at the lower left of the keyboard and the p key at the same time and it brings up a "projector" console that lets you easily switch from laptop to projector to laptop + projector. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Mac Mini (Late 2014) 2 display HDMI and VGA

    Hi,
    I got my new mac mini and i have 2 display. One is with HDMI, other is VGA.
    I will use normal HDMI port and thunderbolt port with Mini DisplayPort to VGA adapter from Apple to use them both, and i want to "Extend" my screen but the Apple guy on the store told me that "you only can duplicate the screen, can not extend it; both your HDMI and VGA monitors screen the same thing."
    Is it correct? Because i think he is not sure about what he said it doesn't make sense to me.
    Regards.

    I have no idea where what person is getting his information. I have used yur arrangement on my 2012 Mini which has one HDMI and one Thunderbolt port.
    You sense is better than that person's. You you can have extended display with HDMI and VGA via mini displayport (plugs into Thunderbolt port) to VGA adopter

  • HDMI To VGA on the Mac Mini

    I have a New Mac Mini and need to add a second VGA screen to the HDMI port will the Belkin Hdmi to Vga convertor be able to do this?

    Thanks Guys
    Just one last thing would the below be able to do it as well, just not sure which one to buy? The Belkin Or Kanex
    http://store.apple.com/us/product/H9139VC/A/kanex-atv-pro-hdmi-to-vga-adapter-wi th-audio-support?fnode=3a

  • Monitor Keep Flashing after connecting External Monitor with HDMI to VGA Adapter

    Dear Support,
    Here the case that i have connecting an External Monitor by HDMI to VGA Adapter.Once it connected, the monitor (Macbook) with keep flashing and no signal on the external monitor. Please help.

    Hi there BrianYip,
    You may find the troubleshooting steps in the article below helpful.
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/ht1573
    -Griff W. 

Maybe you are looking for

  • Mini-DVI port: monitor goes black for a moment if wiggle the adaptor

    I have an Early 2009 mini 2.0GHz, which I'm using with the included Mini-DVI to DVI adaptor. I've discover that if I press down on the adaptor plug just right, the monitor flickers to black for a moment, as if the adaptor were pulled out of the Mini

  • ISync 2.2 and Mac OS X 10.4.6 Update released: READ THIS before installing

    Apple has released iSync 2.2 as part of the Mac OS X 10.4.6 Update package, and it has serious ramifications for current or first-time users of iSync. READ this information below before you perform the installation. This information is extracted from

  • User exit for ME22N

    Hi! Here's our scenario: we wanted our PO to be non-editable when it comes to price when it has already a goods receipt. But right now, the system allows it and no available system messages can suffice the requirement. Is there an available user exit

  • "unknown element xmlns in taglib" Urgent!

    Hi, I am using IIS 4.0 with Resin 2.0.2. I have created a BC4J project which is running perfectly well from within JDeveloper. After I deploy the project, upon running the application, I get the error message :- 500 Servlet Exception /webapp/DataTags

  • AVI files aren't displaying video in Premiere cs5, audio only.

    I've tried encoding/converting the like another user suggested in this thread Download and install VLC. In the folder containing your AVI files, create a new text document called "avi2mp4.bat" (without the quote marks). Be sure it has the .BAT extens