S2109A not responsive

My S2019A tablet suddenly became unresponsive.
Power-on button doesn't work and nothing comes up even if I plug it into the charger.
Does anyone have any idea how to fix this?
I've previously encountered a problem with it restarting repeatedly, but managed to solve it using a forced reset.
This is a different problem, screen does not come on at all.
Solved!
Go to Solution.

Hi isthmus,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your S2109A Tablet is not turning ON and displaying blank screen and the issue is same if the charger is connected, as suggested by RMattoo’s post performing factory reset should resolve the issue, if the issue persists I would Strongly Suggest Calling Technical Support for Assistance, Click here to open a link where you can select the country and get the exact contact support number, I’m sure they will be a great help.
Hope this helps!!!
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Windows 8.1 Flash CC 2014 Not responsive for about 30 seconds every 10 mins or so... Trying 30 day trial.

I am trialing CC 2014 to open some files from an animator. It locks up all the time for between 10 to 60 seconds. It picks up fine once it wakes back up, but it happens very regularly and doesn't seem to relate to any particular activity.
During this time it is marked in the task manager as (Not responsive) It doesn't seem to be taking up a huge amount of CPU or disk read/write during this. It happens whether I have the network connected or not.
It's the only thing on my laptop that does this. I have CS4 installed and it doesn't have this issue.
My laptop has 16GB ram, quad core i7 and good size solid state with over 100GB free space that can do 550MBps.
Is anyone else having these issues? It's unusable, but it's giving me plenty of tea breaks so I suppose that's something.
I know someone who seems to have similar issues on Flash CS6.
Thanks,
Mike

Wooah, yeah I think that's done it. Also seems to have fixed it for my friend using CS6. Thanks for the help. I guess I was right with my every 10 minutes estimate then, it was exactly 10 minutes
Surprised it locks it up so bad though. Maybe there should be a warning message if it regularly takes longer than a few seconds telling you what it was and how to disable it.
Thanks,
Mike.

Trackpad not responsive when MB connected to an external device

After I installed Maverick on my MP retina, every time I connected my smartphone the screen freezes and the trackpad is not responsive anymore. Never happened before. What shall I do? Reinstall Lion? Thanks.

The higher resolution is pushing you to the next higher rendering resolution. If you are in Develop and set zoom position to 1:4 or 1:8 it should speed back up (each level is 4 times as fast as tge previous).

Macbook pro 2011 mouse / keyboard not response in heavy load

When I am playing games in the 2011 Macbook pro. Mouse clicks / keyboard sometimes not response or delay, this occur when the machine under heavy load.
This won't happened in my old BLACK core duo Macbook.
Does everyone notice this?

If your machine is less than a month old, you should use your warranty and call AppleCare (you have 90 days of phone support) or take your machine back to the Apple Store (make an appointment with the Genius Bar first) and let them deal with the issue.
If yours is the 13" model, there is a thread on here (somewhere) about trackpad and keyboard failures when also using Bluetooth, I think (don't quote me on that - I don't have the affected machines so I don't follow the thread too closely).
But I do believe that Apple is aware of the issue and had 'fixed' it in either a patch preceding 10.9.4 or in 10.9.4 itself.
Give them a call...
Clinton

HT201412 Touch screen input not responsive.

Touch screen input not responsive. Cannot slide to power off. Appear message "iCloud Backup: This ipad hasn't been backed up in 2 week. Backups happen when this ipad is plugged in, locked, and connected to wi-fi" Touch OK but nothing change. Does follow instruction but nothing works

Thank you for your help.
I did all of trouble shooting procedures but it did not work.
I called Apple Care and explained what kind of problem i had and they booked me up with Genius Bar @ Apple Retail Store.
I went to them last Saturday and they replace my troubled iPhone with the new.
they said it is very rare problem reported so far and i could be the first few ones.
it was no hassle and they all were very kindly listened to me.
anyway, problem solved with replacement and i was lucky to have back up for iPhone.
Anyone has same problem, call 800-MY-IPHONE and book yourself to nearest Genius Bar to get your iPhone served or replaced.
thanks

Lync freeze (not response) when press ` ( change language key)

ref
https://social.technet.microsoft.com/Forums/office/en-US/68ac31b0-0228-416c-a524-b3f356d0f010/lync-2013-client-hang-and-not-response-while-user-try-to-switch-input-language-by-grave-accent-key?forum=lyncprofile
I just download and fresh install from portal.office.com
the system is clean fresh and update to the most recently patch
After this issue , I try to
1. repair Office 2013 and Lync 2013 : the result > still freeze
2. Uninstall office 2013 and lync 2013 -> Reboot -> install office/ Lync : the result > still freeze
3. change the language key from ' to shif+alt : the result > Not freeze
4. Chage the language key back to ' : the result > Freeze

Hi Pinkybear,
This is a known issue, to work around this issue, you must select one of the other keyboard shortcuts from Control Panel.
The related KB for your reference.
Lync 2013 stops responding when you change input language between English and Thai by using grave accent
http://support.microsoft.com/kb/2987778
Best regards,
Eric

.. If the app is – in or out of background - (if in background NOT the first app) and the device locked – when you get a push message and DO NOT response straight away. Later unlock, click the app icon (which will have a badge on it) and it fails.

.. If the app is – in or out of background - (if in background NOT the first app) and the device locked – when you get a push message and DO NOT response straight away. let it fade off then, Later unlock, click the app icon (which will have a badge on it) and it fails to pop up my internal alert box and my notification message is gone(cannot get access to it in code).. other times it works . Including if you tap the messaeg from app centre. (this is all on a iPod 5.1.1).
Here is someone else with same problem http://stackoverflow.com/questions/7080266/receive-remote-notification-when-ios- device-is-locked-and-im-not-responding-imm

Tell Apple
Apple - iTunes - Feedback

End Call not responsive

When I start to make a call, pressing the END Call is not responsive and the recipient receive a missed call. It takes 3 seconds to respond.

Hi and Welcome to the Community!
Can you clarify please...why would you be using the "End Call" when you "start to make a call"?
In any event...anytime random strange behavior or sluggishness shows up, the first thing to try is a proper reboot:
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. If this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Also please check your BB10 OS level:
Article ID: KB23393 How to check the model number and version of the operating system on a BlackBerry smartphone
If you are on anything prior to 10.2.1.3247, then it is strongly advised that you update to that level ASAP. Sachesi is a very good method to do so:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-BB10-OS-Using-Sach...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I used firefox 3.6.14 on windows 7 x64 (firxfox x32). I found a problem when I develop my website and alert data or value via javascript , firefox hang (not response) every time. What's happend? How to solve is problem?

I used firefox 3.6.14 on windows 7 x64 (firxfox x32). I found a problem when I develop my website and alert data or value via javascript , firefox hang (not response) every time. What's happend? How to solve is problem?
Thank you for help
Lohkaeo

Oops - for some reason, this problem now seems to have gone away. May have had something to do with Flash. I'll keep my fingers crossed.

Layer mask not responsive

I have noticed in PSE 12 and 13 when I do layer mask selection or doing refine edge the software is not responsive. It happens in my windows 7 but work very well on OSX ..Please help

Steve,
That will take a real bite out of editing a Layer Mask, as will having the Blendin Mode of the Brush set to something, besides Normal.
Glad that you found it, and happy editing,
Hunt

TS3274 unable to take pictures with my iPad as the camera is not responsive

unable to take pictures with my iPad as the camera is not responsive...please assist

Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple logo. Ignore the red slider.

Oracle in not responsing to connect requests via sqlplus

Hi,
I am trying to connect to oracle 10.2.0.3 on linux via sqlplus.
All the oracle process are up.
tnsping and ping are response OK.
I check the uptime, and it show:
01:58:21 up 3 days, 23:47, 1 user, load average: 0.09, 0.03, 0.01
THE PROBLEM IS :
Oracle is not responsing at all to any connect requests:
sqlplus xxx/yyy@prd
SQL*Plus: Release 10.2.0.3.0 - Production on Fri Feb 1 00:23:56 2008
Copyright (c) 1982, 2006, Oracle. All Rights Reserved.
Quit
I set the following parameters in the sqlnet.ora:
trace_level_client = 16
trace_file_client = client
trace_directory_client = /software/oracle/admin/prd/net_log
trace_unique_client = on
log_directory_client = /software/oracle/admin/prd/net_log/
trace_level_server = 16
trace_file_server = svr
trace_directory_server = /software/oracle/admin/prd/net_log/
trace_unique_server = on
log_file_server = svr
log_directory_server = /software/oracle/admin/prd/net_log/
I couldnt find any error in the trace files that had been generated.
Does one have any suggestion ?
Thanks.

Can you post the last 100 or so lines from a client trace that is hanging (before you kill the hanging login)?
The advice to check the listener log on the server is sound, as would be a look at the server's alert<sid>.log and an strace output of the attempt:
strace sqlplus xxx/yyy@prd
The advice to delete your spfile and increase PROCESSES is clearly unwarranted, since you have provided no indication that you are exceeding that resource limit. Furthermore you are not receiving "ORA-00020: maximum number of processes (%s) exceeded", which is what we would expect in such an eventuality.
Regards,
Jeremiah Wilton
ORA-600 Consulting
http://www.ora-600.net

My iPhone 4 home button doesn't always work. sometimes its just not responsive. other times, it works great. what's the problem, and how do I get it fixed? my iphone is 2 days old

my iPhone 4 home button doesn't always work. sometimes its just not responsive. other times, it works great. what's the problem, and how do I get it fixed? my iphone is 2 days old

Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
-Griff W.

HT5934 i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???

i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???

raghav sharma wrote:
i have update my iphone 5 with ios 7 and now it is working very slow.. it is not responsing property.. now what i have to do???
Try This...
Close All Open Apps... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414

Printer control panel is not responsive.

touch printer control panel is not responsive. The power button is responsive as well as the nfc button. Need help please

Hey , Welcome to the HP Support Forum. I see that your HP ENVY 7640 e-All-in-One Printer's front panel is not functioning. I would like to assist you with this. Have you tried a hard reset? 1. Ensure your printer is powered on.
2. Disconnect the power cord from the rear of the printer.
3. Wait 60 seconds.
4. Reconnect the power cord to the rear of the printer.
5. Press the Power button to turn on the printer (if it doesn't automatically reboot). There are more advanced reset steps available but they're no good to you if the printer won't allow for you to navigate through the touch screen menus. If this basic tip restores front panel functionality let me know and I'll private message you the semi-full reset steps. Otherwise I recommend you reach out to our tech support team. You can click on the following link to initiate a case: www.hp.com/contacthp/
Once you fill out the online form to create your case you can choose from different direct contact methods. Thanks for posting in the HP Support Forum. Have a great day!

S2109A not responsive

Similar Messages

Maybe you are looking for