S3 mode doesn't work fine on K8N Neo-fsr since overclocking, please help!

I have a K8N Neo-FSR (MS-7030) BIOS version 1.6 (I tried 1.4, 1.5), running AMD64 2800+ SK 754, 2x 256MB DDR400 Kingston valueram pluging in slot 1&2. It runs well except S3 mode    .
Since I overclock HTT (everythings else have their own default values), S3 mode seems to work so crazy . After wake up from this usefull stop-grant standby mode, HTT is given back to its original speed, 200MHz, without notice (?!)  .
You know that I don;t like this much, do you? 
Who responsible for this function? Mainboard or CPU? If it's mainboard, which department will be sentenced, BIOS or chipsets/ICs? 
Could anybody give me a solution to achive higher speed by overclocking without giving up using S3? 
Thanks so much!

It's a bad new! I had bad feeling about DFI with the same problem, S3 mode resuming bring FSB back to df and even sometimes led the system to the ruin. But upgrading bios solved this issue. My old Abit did S3 mode fine. Now I have a new MSI and once again I must use teknophyle's way or slow hibernation instead.
On the same occasion, I wana ask about some shortcoming in 1.6 bios: power on by keyboard/mouse and power led options. I only found S3 wake up by keyboard/mouse but not keyboard/mouse power-on options! There is power led option in version 1.56 but it disapeared in 1.6. Now my mobo has no signal to differentiate between sleep and power-off. would you give back the useful power led option and add power on by combination keys in the near future bios version, syar? Look forward to hearing some good new from you :D.

Similar Messages

  • K8N Neo FSR Bios overclocking functions help needed

    Hi all, I am a small pc builder for the family and i have found some problems with the bios of my uncles K8N neo FSR which I recommended for him. Basically it wouldn't seem to overclock with the 'Dynamic Overclocking' function on bios v1.7 but did manually by adjusting FSB incrementally (ie from 200 to 205 Mhz). When I questioned this before someone had mentioned that it could be ok to run like this. However I have since updated the bios to v1.9 and even v2.1 as they became available but now neither seem to overclock manually nor using 'Dynamic overclocking' 
    Firstly though, can someone clear up my first conception; To test if the Dynamic Overclocking function is working can I set it to a higher setting (ie.'Commander'), save and exit bios (restarting) ---> go straight back into bios ----> go straight back into Cell Menu and check 'Current frequency of cpu' has changed?
    I only ask this as if this is the case then my Dynamic Overclocking function hasn't worked with three bios' and I wont bother with anything until I RMA the board lol, as I have never been able to change the frequency of my cpu at boot/bios stage with the dynamic overclocking function.
    Can anyone help me?

    Hi Stu, yesterday I think i found out what u mean lol. I studied a 'Sticky' ? about overclocking A64s and found some interesting stuff. Apparently overclocking the HTT is dangerous, and A64s are always at least half locked. Now with this in mind Ive been wondering if there are interlocks built into my mainboard stopping me from using the 'CPU Overclock' function to overclock my pc manually from the set 200Mhz while my HTT is still set at 4x. -I say this as the HTT on my system is 800Mhz for a socket754 Sempron 3000Bx, thus overclocking this would increase my HTT above the 800Mhz threashold (I think) lol. All sounds complex but I think Ive figured it out as Im following instructions from the sticky to lower my HTT multiplier before increasing my cpu overclock. Its hard as my mainboard has Nforce3 chipset which has different ways of overclocking to every other board lol. So far I have managed to increase the overclock, but only when the HTT multiplier is lowered to 3x. I have also lowered my cpu multiplier though, and thus am trying to figure out where my 1810Mhz clock speed has changed to 1630 lol. Will try again now. I want to raise the clock speed above 1810, keeping the HTT lower than 800 and leaving the memory alone at 400DDR lol. Im hoping the memory is seperate as it seems to be on this chipset.

  • When we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/828024]''
    when we using overflow-x and overflow-y in tbody its not working properly. In the previous version i.e. 3.7.1 its working fine the same coding....Please help me.

    See:
    *https://developer.mozilla.org/en/Firefox_4_for_developers#Miscellaneous_DOM_changes
    *http://www.cssplay.co.uk/menu/tablescroll.html
    A good place to ask questions and advice about web development is at the mozillaZine Web Development/Standards Evangelism forum.<br />
    The helpers at that forum are more knowledgeable about web development issues.<br />
    You need to register at the mozillaZine forum site in order to post at that forum.<br />
    See http://forums.mozillazine.org/viewforum.php?f=25

  • I have iphone 3gs and im update my iphone to ios 6 and after it doesn't work,and i can't restore my iphone please help meeeeeeeee,i neeed my iphone:(

    i have iphone 3gs and im update my iphone to ios 6 and after it doesn't work,and i can't restore my iphone please help meeeeeeeee,i neeed my iphone:(

    how can i restore my iphone without update?because when i want restore itunes told me restore and update and when i restore and update my iphone take the ios 6 and it doesn't work again...please help mee...tnnnxxx

  • I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

    I cant see the Video of WMV file through Flip4mac, only audio is working fine on macbook pro. Could anyone please help?

    Hi,
    Check to see that external video is turned on.
    View > External Video > All Frames. and
    View > Video Playback > Apple Firewire PAL/NTSC.
    Sandeep

  • Who have v1.56 bios for K8N Neo FSR,give me please.thx

    who have v1.56 bios for K8N Neo FSR,give me please.thx 

    Bios Collection. *Updated * 7025 1.B beta4 follow Syar's MSI Nvidia64 Bios Collection  link.

  • HT201263 My IPhone 4 won't restore from recovery mode, it comes up with corrupted file message and I have to start again but it still doesn't work. Tried this about 10 times. Please help?

    My I phone 4 has put itself into recovery mode and I cannot now restore it. I have plugged it into I Tunes about 10 times and every time it starts to restore then comes up with the message Corrupted file start again. Please help.

    Try restoring as a new device first.

  • Terratec dmx 6fire usb doesn't work on my mb pro 13 i5 2011 please help!

    After installation driver of my soundcard terratec dmx 6fire usb on my mb soundcard doesn't work. But on mb pro 15' i5 2010 it's work's good. I think the problem is in the new sandy bridge chipset. If anybody have same equipment please help.

    Thank to Terratec support for Help. My problem is solved. Now i can mixing with my soundcard terratec 6fire usb. Sound is good!
    Answer of support terratec:is your Mac OS working in 32 bit or 64 bit mode ? The DMX 6Fire just work on
    32 bit..
    Normaly this can be the only reason, when you say, that the device works on
    another Mac system without problems.
    Also with the installation there is nothing you can do wrong. The device
    must work, when you just have connected it via USB to the Mac. The DMX 6Fire
    USB software is just installing the additional ControlPanel for the DMX.
    All new macbook pro works at 64 bit mode at default. I change mode to 32 bit of my macbook pro type command in terminal :sudo systemsetup -setkernelbootarchitecture i386.
    Nowi work in 32 bit mode and my soundcard works too Thank you for Help terratec support

  • My nano doesn't work, cannot be find in Windows and itunes. please help!

    Before it doesn't work, I am charging the battery.
    But when I am about to disconnect it from the systme, Windows prompted "can't be disconnected", I tried several times, the same prompts. So I shut off the computer, but the nano doesn't work.
    I have tried the 5-R steps, nothing changed.
    there's only the picture of a file folder with an exclamation point comes up, and on the bottom it has apples support website, alternating with a apple logo.
    The worst thing is that I cannot find my nano in the explorer, so I cannot restore/update or format it.
    BTW, I have disconnected the nano from all power sources and left it disconnected for about 24 hours, reconnect to the USB port, a battery displayed on the screen, but for about 20s, display the the picture of a file folder aggain.
    Please help!
    A1137   Windows XP  

    Welcome to Apple Discussions!
    Is McAfee Virus Scan installed on your computer? That could be interfering with your iPod when you try to eject it.
    Also, see these...
    iPod shows a folder with exclamation point
    http://docs.info.apple.com/article.html?artnum=93736
    Can you get your iPod into Disk Mode?
    Putting iPod into Disk Mode
    See these well-written post as well...
    Mitch 751: Sad Face or Folder with Exclamation
    btabz

  • HT201209 I use a Gift card to buy a game and it doesn't work how can I get my money back please help

    I used a gift card to buy games and one of them doesn't  work how can I get my money back

    If the game doesn't work (and you've tried deleting it and re-downloading it via the Purchased tab in the App Store app and you've also tried contacting the app's developer) then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I can't open anything that uses flash player in Firefox, I have uninstalled it and reinstalled it and no luck! but flash works fine on my seamonkey browser, can anyone please HELP me?

    None of the flash games will work on FF, I have even uninstalled FF and reinstalled it, I have disabled QuickTime, I have uninstalled Adobe flash and reinstalled it and still NOTHING! Flash works fine on Seamonkey though

    Check that plugin scanning is turned on (it should be by default). If it is turned off Firefox will not search the Windows registry for details of plugins that it can use.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''plugin.scan.plid.all''', if the value is set to '''false''', double-click on it to change it to '''true'''
    If it was set to false, re-start Firefox to see if the Flash plugin is now available.
    Also make sure that you have installed the version of Flash used by Firefox. You should have it because SeaMonkey is using it, but if the Flash plugin is in SeaMonkey's own plugins folder Firefox may not be able to see it.
    Download the latest plugin from http://get.adobe.com/flashplayer/completion/?installer=Flash_Player_10.2_for_Windows_-_Other_Browsers and run it to install the version of Flash used by Firefox, this will install it in the default location so that Firefox should be able to find it.

  • I'm having trouble with my hotmail (msn). It works fine with explorer but I prefer Firefox, please help.

    I can login to my email but once there I cannot open, move or delete anything, I put something out on a blog and one other person had the same problem. I tried Explorer and my email works fine. Problem has to be with firefox. I'm running ver 3.6.17

    You can go to your country site from http://support.apple.com/kb/HT5699 or call your country support number from http://support.apple.com/kb/HE57 and ask to speak with the Account Security Team

  • How can I get my Bluetooth to connect? I took it to the apple store in San Francisco and got horrible service and my phone still doesn't work in regards to Bluetooth and glitches ? Please help

    I am very disappointed, I can not connect my Bluetooth to any device (ie. beatpill) and I took it to the store they reset my phone and told me everythibg should work and it turns out that nothing works. Not only the Bluetooth but my phone glitches while in use (ie. It freezes, it'll reset randomly, and the apps freeze or won't close, whrn texting it will close out my messages) things of that nature. Please help because thus far no one else has and it has become a problem for me to use my phone.

    What does the beat pill manual say on how to pair to iphone?
    We have no issue connecting an iphone 4S/5/5S or 6 to it.

  • K8n neo platinum dead? please help urgent

    Hello everyone... Yesterdey I was working with my computer, transfering normal stuff from my mobile to the computer and suddently my monitor went black, then I restarted my computer, but my monitor was still black and my d-bracket was all red lights, so I shutted down my computer to change my grafics card an see what the problem was, but it would never turn on again... it startind turning on and off every half second non stopping.. so I went to borrow other power supply but when I try again to turn it on, it was simply dead and with my old one was still dead. Is my mobo or processor fried??? :( please help...
    Msi k8n neo platinum socket 754
    revoltec power supply 450 watts 25 amps in 12v rail
    2 gb kingston pc400 ram
    80 gb sata hd
    120 ide hd
    ati radeon 9600 xt grafics card
    athlon64 2800 processor
    pinnacle pci tv card
    hp dvd
    philips dvd

    Quote from: rubengomes on 14-January-07, 22:00:09
    thanks for the reply... butt it still does not work...
    take CPU out and find a way to test it somewhere else. if CPU is fine, then must be failure mainboard if we dismiss PSU factor(you have already tested with 2 PSU's good ones)

  • Advanced System Optimizer is no longer able to scan my Firefox (version 5.0) browser to remove browing history or other hidden traces. It worked fine with previous versions of Firefox. Please help.

    ASO's Privacy Protector crashes whenever I attempt to scan the Firefox browser to remove browsing history and other hidden privacy traces. I get a Runtime error message that the application has closed unexpectedly.

    See ASO support for help with that problem.

Maybe you are looking for

  • Sync with outlook (calendar problem)

    I used to sync and everything was all right, but now (I don't know after what) everything syncs but my calendar. I use microsoft outlook 2003 and all my app.s are up to date. Now, contacts are syncing but not calendar. any ideas? I am going insane...

  • Making a simple gallery - issues with frames

    Hi there, Please help! I'm at the end of my tether with this one. I am a beginner with Dreamweaver and maybe I'm running before I can walk, but I thought what I am trying to make would be fairly simple.  Haha! I want to make a basic gallery, ie. you

  • Just installed iOS7 on iPhone 4.  Huge typing lag problem now.  Any fixes?  Apple please fix asap.

    I just installed iOS7 on my new iPhone 4.  Huge typing lag problem now.  Any fixes out there?  How do I uninstall this update.  The phone worked better without it.  Don't even like the new layout and icon design. Apple, please fix this now!!!

  • Essbase EAS Cannot Add or See Essbase Server

    Hi, Essbase 11.1.2.2. fresh install. On EAS when trying to add a new server, or see a server list I get errors. The server list is empty. If I manually add a server along the lines of localhost:1423 or similar then I get network error 10061 failed to

  • 1 project many Business unit

    Hi Guru's, We have taken an new project in which, there is more than one Business unit will gonna provide reosurces for the project. now i want to the cost & reveue for each Business Unit under this project & wants to give customer 1 combine invoice.