S3 trio 3D/2X VGA card configuration

Dear,
I have installed Solaris 8 for Intel on my PIII system. It has an S3 Trio 3D/2X 4MB VGA card installed in it. There is no such VGA card option given in the list while I run kdmconfig. My Monitor is Compaq V500, Which VGA I should choose from the list and which resolution level I should set inorder to get true graphics while solaris is running with Xserver. Right now, I am using standard VGA from the list. xserver runs but the graphics are very poor and dull.
Kindly advice.
regards,
Imran

Well unless it's in Sun's HAL compatibility list you are out of luck. Try applying Sun's latest Intel patches for it. Otherwise you may want to try www.xig.com and see if they have a video driver for you.

Similar Messages

Problem with VGA card

Hi,
I just bought an MSI 865 Neo2FISR MOBO and a Asus 9600 XT VGA card.
As someone said to me on this forum, i install first the intel INF files (april 2003 version)from the MSI CD. The screen was OK (only try with XP not with Games).
Next I install the Asus drivers and reboot the system. Since I've done that, my screen is complety black and i only can have XP in a special mode ("sans echec") in french.
2 days ago i instal first the Asus drivers, Direct X 9 and next the Intel INF and the result was the same.
Can someone Help Me ?
Thanks!
Configuration :
P 4 2.8 Gh HT
MSI 865 Pe neo 2FISR
Seagate 7200.7 120 Go
2*256 DDR 3200 Twin X LL Corsaire
Asus 9600 XT
XP Pro
Sony DVD Player
Pionneer DVD R 106 Burner
Screen : Hercule 920 Pro DVI

Try with ATI reference driver instead.

What happen to the VGA card????

ok
my pc :
pro:p4 3.2 1mb cash fsb 800
board: Msi 865 PE NEO2 P SERIES
VGA : HERCULES RADEON 8500
SOUND : CREATIVE LIVE
POWER SUPLY : 300W
+3.3V 12A
+12V 12A
-12V 0.5A
+5V 22A
-5V 0.5A
during playing games or even running winows applicatios the monitor shows vertical lines of many colours and the pc crash and i had to restart , ome time i had to remove the card and put it again to work but the problem return back later???????????????????????????????????????//
i have the latest driver 4.10 and tried to install Windows Me the problem is the same
what happen to my VGA card /??
please help

i wil buy the power supply after tomorrow what is the best????
do u think that problem only in the power ???
thanks for help
my msn messenger : [email protected]
can we talk if u please?

CPU initialization hang on bootup- works w/o VGA card!?

After moving my system across country I have encountered a problem. When I boot up my K7N2-L with 2200 and MSI GF4 4200, the system hangs on "processor initialization," as indicated by the D-bracket LED display. Removing *just the VGA card remedies this problem and the system moves to boot up properly.
What could be the cause of this problem? The only way I can see the VGA card affecting the CPU is by insufficient power or a short in the system. Would this be a mobo problem, a CPU problem, a PSU problem or a VGA problem? the system had worked fine months before I moved it.
Any help is appreciated.
Nathan

Quote
Originally posted by NovJoe
Low PSU power possible to affect this... Over-heating of card and CPU could also be the cause... BIOS settings could be another cause too... Trying looking into these areas as there's alot of possibilites on a general problem like this.
All the Best... :D !!!
I have reseated my processor- overheating is not the cause. It has worked fine before. I have cleared the CMOS, so BIOS settings are not the cause. It is not low PSU power either (unless something is wrong with my PSU). This system has been running fine for months until I moved it. Thanks for your suggestions though...

Ultra 60 with a Hercules VGA Card wont show me anything

Hi there,
i just have a Ultra 60 on my desk, and unfortunately I am not getting anything on my screen. Is there anything special I should look after to get the U60 with the Hercules PCI Card to work? The Model of the hercules VGA Card is: Terminator 3D/DX with a S3 Virge/DX <- if that is of any help.
Thanks
niels

Hello Niels,
Is there anything special I should look after to get the U60 .... to work?
The Hercules PCI card (and any other PC graphics board) won't work with a SPARC system. You have to use a card with OpenFirmware not a VGA BIOS. Please review the Sun System Handbook page of the Ultra 60 for supported cards.
http://sunsolve.sun.com/handbook_pub/Systems/U60/U60.html
http://sunsolve.sun.com/handbook_pub/Systems/U60/components.html#Graphics
I assume you got the Hercules card for free.The required Sun graphics boards are very inexpensive today (from second hand, e.g. eBay).
Even with a Sun graphics card (frame buffer) but without a Sun keyboard the output is directed to the serial console.
There is a german language Sun home user site http://www.sonnenblen.de
Michael

Reinstall osx server 10.3 on an xserve G5 without vga card.

Reinstall osx server 10.3 on an xserve G5 without vga card. How can i software restore the server without a vga card?

"How can i software restore the server "
If you mean restore as in reloading an existing config from a disk image. If you have a bootable diskimage on an external drive of your xserve, and if you have another Mac you may be able to boot the xserve in targeted disk mode and just use disk utility on the second Mac to restore the image from the external drive to the internal drive of the xserve. Restore without erase works the best for this...sometimes you will get a copy error on the last file...not sure what the error really means...but it does not seem to be a real issue.

Driver for Creative graphics blaster 3D CLGD5464 pci vga card

Can anyone tell me from where to find the driver for Creative graphics blaster 3D CLGD 5464 pci vga card. The driver in Solaris8 is for CLGD 5465 which is not compatible with my card. The solaris detects my card as CLGD 5465 but it doesent work. Can anyone tell me what should I do about it?
thanks, Kashif ([email protected])

If it is not supported by the Xserver under Solaris you may find you can get it to work by installing XFree86 (www.xfree86.org), there are compiled binaries for Solaris Intel that will make the transition easier (personally I found the 3.3.5 version works well). First check at www.xfree86.org if your videa-card IS supported under XFree though. There are some tweaks you need to add to get it all to work in the Solaris x86 FAQ. Since you probably have to do all of this in non-gui its not easy but can be done.

Require Sun AMD Server with VGA card = 16M - HELP

Hi everybody,
Right now, Sun has the AMD Servers: V40z, X4100, X4200.
These products are very good with high performance and quite cheap.
But I find out that the integrated VGA of all AMD Servers has only 8MB.
For my job, I need graphic card with at least 16MB.
Can I buy a VGA card with 16M/32M from Sun?
Tks a lot,

Joe's information is pointing to the correct direction.
1280x1024 at 32bit color depth needs less than 8MB of video RAM.
(... actually, less than 6MB)
Glance at this page at the P.C. Guide web site.
http://pcguide.com/ref/video/modesBuffer-c.html
The PCGUIDE.COM web site has been around since 1997 and I often find its information of value.
That video memory requirement link is a part of that web site's topic list.
http://pcguide.com/topic.html
I've saved the topic list as a bookmark, then use it to find
whatever sub-topic might be of interest-du-jour.
However, all those systems are servers, not desktop workstations.
You shouldn't need any remarkable graphics capabilities to administer them.
That's why there are no qualified graphics upgrade options.

Credit Card Configuration in SAP

Dear All,
Can I have the information on Credit Card Configuration.
Regards,
Geroge

Dear George,
Please find the relevant details related to credit Crads as follows:
Overview
This document attempts to explain in the brief the credit card processing in SAP.
SAP provides a flexible and secure payment card interface that works with the
software of selected partners that provide merchant processes and clearing house
services. In SAP the credit card processing is integrated with the sales and
distribution module.
Payment card configuration
Much of what is required for credit card processing to work with VISA, Master
Card, and American Express is already set up in SAP.
For all credit card configurations refer to
Define Card Types
Transaction SPRO IMG Sales and Distribution Billing Payment Cards
Here we define the type of cards that can be used in the system. A four-letter
code is given for each card type. E.g. MAST for Master Card, VSAJ for Visa
Japan. A function module for checking the card number is also specified here.
1. Define Card Types
Credit Card Configuration And Processing In SAP
Maintain Card Categories
(a) Define card Categories: Here we specify the card category of the
payment card. With this the system automatically determines the card
category when you enter a card number in master data or sales
documents.
(b) Determine card categories: Here we specify the acceptable number
ranges for different card types. Also card categories are assigned to the
card types. Even though SAP comes with card checking algorithms
(Function Modules) for standard card types this configuration setting
is particularly useful to those cards that do not contain any standard
checking algorithm already set up in SAP.
2. Determine Card Categories
Maintain Payment Card Plan Type
In this step, you assign the payment plan type for payment cards, the payment
card plan type, to all sales document types in which you will be using payment
cards. You cannot process payment cards if you have not made this assignment
The standard system contains payment plan type 03 for processing payment
cards. 3. Show the screen where this assignment is done.
Credit Card Configuration And Processing In SAP
3. Maintain Payment Plan Type
Maintain Blocking Reasons
In this step, you define blocking reasons for payment cards. You enter these in
the payer master record to block cards. The standard system contains blocking
reason 01 for lost cards.
Risk Management for Payment Cards
Transaction SPRO IMG Sales and Distribution Billing Payment Cards
Authorization and settlement Risk Management for payment cards.
Risk Management plays a central role within Sales, providing you with checks
and functions to minimize your credit risk. In addition to letters of credit and
export credit insurance, payment cards are among the payment guarantee forms
that you can use to insure payment for sales order items. SAP comes with predefined
payment forms of guarantee as shown below. Customer can also
maintain other forms of payment suited for their line of business.
Credit Card Configuration And Processing In SAP
Define forms of payment guarantee
3. Define forms of payment guarantee
Maintain payment guarantee procedures
In this step, you define Payment guarantee procedure. These procedure controls,
which form of payment guarantee, are valid for a particular customer, and for a
particular sales document type.
The various settings done under this configuration are
Define payment guarantee procedures
Maintain customer determination procedure
Maintain document determination procedure
Assign sales document types
Determine payment guarantee procedures
Maintain authorization requirements*
Here requirements* are set to tell the system how and when to carry out
authorization when a sales order is saved. SAP comes with two requirements
Form routine 1. Carry out authorization only when the sales document is
complete. The system carries authorization when the order is saved.
Form routine 2. Carry out authorization only when the sales document is
complete, but the authorization for all the complete documents is carried out in
batch.
Additional requirements* can be assigned here as per the business requirements.
*Requirements are ABAP/4 code. Requirements for various functions can be accessed using transaction VOFM
Credit Card Configuration And Processing In SAP
4. Maintain Card Authorization Requirements
Maintain Checking Groups
How and when authorizations are carried out depends on the setting you make in
the customizing for maintain checking group routines.
The three main settings that influence authorization are:
a) Authorization requirements
b) Authorization horizon
c) Preauthorization
There are two settings under this setting.
Define checking group: Here a checking group is defined and the
authorization requirement (described in the previous section), Authorization
horizon (described below) and preauthorization settings are done for this
checking group.
5. Define Checking Group
Credit Card Configuration And Processing In SAP
Here you can see a checking group C1 is defined with the authorization
requirement 902. Checking the pre-authorization tells the system to carryout preauthorization
if the order fulfillment date falls outside the horizon. The
authorization horizon specifies the number of days before the material
availability date, or billing date, that the system is to initiate authorization. If a
sales order is saved within the authorization horizon, the system carries out
authorization immediately. If a sales order is saved before the authorization
horizon comes into effect, the system does not authorize at all, or carries out
preauthorization.
6. Preauthorization Concept
In this example, the system has been set to authorize one day before delivery
creation. The system does not carry out authorization when the order is saved on
Day 0, rather on Day 2. Note that the authorization validity period has been set to
14 days in Customizing IMG Authorization and settlement Specify
authorization validity periods. The transaction will have to be reauthorized if
delivery activities take longer than 14 days.
Assign checking groups: Here the checking groups defined earlier are
assigned to different sales document types as shown 8.
Specify authorization validity periods
Here number of days that an authorization can remain valid for different card
types are maintained. Refer to 9.
Credit Card Configuration And Processing In SAP
8. Assign checking groups
9. Assign validity period for authorization for different card types
Credit Card Configuration And Processing In SAP
Account Determination
Transaction SPRO IMG Sales and Distribution Billing Payment Cards
Authorization and settlement Maintain Clearing House
In the following steps, you set the condition technique for determining
clearinghouse reconciliation accounts for authorization and settlement. The
system uses the entries here to determine the clearing account for the payment
card charges. When settlement is run, the postings in the receivable account for
the payment card will be credited and a consolidated debit will be created and
posted to the clearinghouse account. These accounts are a special type of general
ledger account that is posted from Sales and Distribution.
Here, you maintain:
Maintain field catalog.
Condition tables and the fields that they contain
Access sequences and condition types
Account determination procedures
You then assign these accounts to condition types.
Add to field catalog
Here you maintain the fields that can be used in the condition table. 10.
Shows the transaction to maintain the field catalog.
10. Maintain Field Catalog.
Maintain condition tables
Here condition tables are maintained with fields that are added to the field
catalog. SAP comes pre-configured with two condition tables 4 and 6. Refer
11.
Credit Card Configuration And Processing In SAP
11. Maintain Condition Table
Maintain access sequences
In this step we define an access sequence and link the access sequence with the
condition tables.
Here an access sequence is defined. SAP comes with the access sequence A001.
12. Define Access Sequence
Once the new access sequence is defined, it is linked to the condition tables as
shown in the next screen.
Credit Card Configuration And Processing In SAP
13. Maintain Access For Access Sequence
Selecting an access and clicking fields will display the fields for the selected
access as shown below for access 10 as shown above.
14. Display Access Fields
Maintain condition types
Here condition types are defined and the access sequence to linked to it.
Condition types are contained in account determination procedures and control
which access sequences the system uses to find condition records.
These are The condition tables.
Credit Card Configuration And Processing In SAP
15. Define condition type
Maintain account determination procedure
In this step an account determination procedure is defined and linked to the
condition type (which in turn is linked to the access sequence).
Define account determination procedure
16. Assign account determination procedure.
Here an account determination procedure CC01 is defined and the condition type
CC01 is assigned to it.
Access sequence linked to the condition type
Credit Card Configuration And Processing In SAP
Assign account determination procedures
In this customizing the previously set up account determination procedure is
assigned to different billing documents.
Assign Accounts (G/L)
G/L accounts are assigned here for the combination of Sales organization, Card
type, chart of accounts and condition types as shown in the 17.
17. Assign G/L accounts
Set authorization / settlement control per account
Each G/L account is assigned an authorization and a settlement function module.
The system will read the configuration a call the authorization and settlement
function module during authorization and settlement respectively.
Credit Card Configuration And Processing In SAP
18. Set Authorization and settlement function module
Maintain merchant IDs per account
A merchant may have one or more IDs for each clearinghouse with which it does
business. Here, you assign these different merchant IDs to their related
receivables accounts.
19. Assign Merchant IDs
Credit Card Configuration And Processing In SAP
Authorization and Settlement in SAP
20. Sales Order Cycle With Credit Card Authorization
When an order is placed through the front-end system, the order information,
credit card information, billing information, shipping information is passed to
SAP. SAP processes the order calculates the taxes, the shipping costs and reads
the configuration information settings and executes the function module setup as
described in Fig. 18. The function module formats the data and makes a RFC *
call to the payment application**.
The payment application screens the order for fraud, encrypts the data and
communicates with the third party processor who in turns communicates with
the card association and card issuer.
*RFC (Remote Function Call)
*Payment Application: Middle ware between SAP and third party processor/bank.
Credit Card Configuration And Processing In SAP
The third party processor responds back with the response whether the
transaction is approved or declined or referred.
Note: When any item in the order does not have a confirmed quantity, then
authorization is not carried out for the full amount. A small dollar amount
usually ($1) is used as the authorization amount. During the rescheduling run
the system will check for the material availability. If the material can be
delivered within the horizon date, a full authorization for the order is carried
out.
Approved: When the credit card transaction is approved the systems checks for
the material availability, confirms the material for the ordered quantity and saves
the order.
Declined: The material availability check for the material is not made, and the
order is rejected.
Referred: The order is saved and is blocked for delivery. In this situation is
merchant calls the bank checks for the available credit on the card and a manual
authorization is carried out.
21. Sales Order Entry Screen in SAP
Payment Card
Information
Credit Card Configuration And Processing In SAP
The first line in payment card screen is the card check performed by SAP system,
using the card check algorithm function module as described in 1. And the
remaining lines represent the actual authorizations that are carried out.
22. Payment Card Screen
Path Header Payment Cards.
Settlement
Legally the merchant can charge the credit card after the order has been
completely processed. In SAP this happens after a delivery is created and the
goods has been shipped. In case there is not enough authorization for the order
to be delivered, the system goes out the get the authorization for the remaining
amount.
In SAP settlement is initiated using the transaction FCC1. All the valid
authorization is submitted in a batch to the payment application at scheduled
intervals as specified by the third party processor.
The payment application encrypts this data and communicates with the third
party processor. The third party processor checks if the settlement request has a
valid authorization against it. The third party processor then transfers the fund
from the cardholders bank to the merchant bank.
Authorization
Response
Credit Card Configuration And Processing In SAP
Regards,
Rakesh

Video Card and Video Card Configurations for MacBook Pro

Does anyone know where I look to confirm which video card is in my MacBook Pro and also examine the current configurations and possibly look at configuration values for the video card.
I'm kind of new to Mac, but on the Windows world I would right click on the screen and then navigate to the Advanced Video card configurations. Is there something analogous in the Mac world?
Thanks again.

Hi Jason,
use the System Profiler app from the Applications/Utilities Folder to 'examine' the insides of your MBP.
You can also click on the Apple Icon in the Top Menu, choose About This Mac and the the More (Further) Informations button. (I have a german OSX...).
The only avaiable configuration options are found in the System Preferences (Display and Energy Savings).
Have Fun
Stefan

MSI FX 5600 VTDR 128 VGA card, Pinnacle 8.8.17 SE REBOOTS Windows XP when it renders.

The Problem is that once video is captured by the MSI FX 5600 VTDR 128 VGA card, Pinnacle 8.8.17 SE crashes Windows XP when it renders.
I am using the latest MSI 44.03 drivers and the WDM drivers as shown in Windows XP system properties, hardware, are 2.0.3.0 09/04/2003.
The VGA card is set to CLONE mode and OVERLAY controls to FULL SCREEN DEVICE = SECONDARY DISPLAY, to get video output using thesupplied 9-SSCCR adaptor and
S-VHS cable to an analog VCR.
IF I DISABLE THE OVERLAY CONTROLS, RENDERING COMPLETES, XP DOES NOT REBOOT, BUT I CAN NO LONGER EXPORT TO THE VCR!!!!
I would appreciate any assistance or explanation.

Richard,
Thank you for your speedy response.
The information you requested is as follows:
IRQ Numbers
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard
IRQ 3 Communications Port
IRQ 4 Communications Port
IRQ 6 Standard floppy disk controller
IRQ 8 System CMOS/real time clock
IRQ 9 Microsoft ACPI-Compliant System
IRQ 10 MPU-401 Compatible MIDI Device
IRQ 12 Microsoft PS/2 Port Mouse (IntelliPoint)
IRQ 14 Primary IDE Channel
IRQ 15 Secondary IDE Channel
IRQ 18 Silicon Image SiI 3112 SATARaid Controller
IRQ 19 MSI MS-StarForce GeForce FX 5600 (NVIDIA GeForce FX 5600)
IRQ 19 Adaptec AIC-7850 PCI SCSI Controller
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface
IRQ 20 NVIDIA PCI to USB Enhanced Host Controller
IRQ 21 OHCI Compliant IEEE 1394 Host Controller
IRQ 21 NVIDIA nForce MCP Networking Adapter
IRQ 21 3Com 3C920B-EMB Integrated Fast Ethernet Controller
IRQ 21 Standard OpenHCD USB Host Controller
IRQ 22 NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital)
IRQ 22 Standard OpenHCD USB Host Controller
PSU detail.
AOPEN FPS300-60PN(PF)
+3.3v DC 28A
+5v DC 30A
+12v DC 15A
+5v DC sb 2A
-5v DC 0.3A
-12v DC 0.8A.
Any comments would be much appreciated.
Another issue I have relates to video captured by the MSI FX 5600 VTDR 128 VGA card showing distortion or tearing in the bottom lines.
I am trying to capture, using an MSI FX 5600 VTDR 128 VGA card, I am using the latest MSI 44.03 drivers and the WDM drivers as shown in Windows XP system properties, hardware, are 2.0.3.0 09/04/2003.
The capture system is PAL, I have selected PAL-I, my video sources are either an analogue VCR or an analog Camcorder. I use the analog VIDEO IN or the S-VHS IN of the supplied 9-SSCCR adaptor.
The software packages I have used are Pinnacle 8.8.17 SE, Intervideo WinProducer 2.0 or MSI Media Centre II deluxe (including patch).
Thanks for your support.
Sincerely,
Haroon Sheikh.

Motion on G4-best VGA card ??

I use a MacBook Pro for editing native HDV and my Dual 867 G4 will get a processor upgrade soon to make it a Dual 1.25 running 10.4.9 and 2gigs of RAM. I know PCIe and PCIx are the new specifications for VGA cards, but what PCI card is still out there that works well with Motion ?

There is NO PCI card that will work with Motion - AGP? Yes. Search is your friend:
http://discussions.apple.com/search.jspa?threadID=&q=graphics+card&objID=f656&da teRange=all
I use an ATI x800 flashed over from a PC version myself in my MDD G4.
Patrick

TS 100 No boot when Rocket Raid Card configured

I have a Rocketraid 2320 controller. With the card installed and NO raid configured I can boot to the MS server 2003 Standard cd disk. With the raid card configured I cannot boot to the CD drive. I also installed a SATA drive (not on the raid) installed MS server 2003 standard, all is well until I configure a raid array on the Rocketraid card.
I then only get a flashing cursor and no boot. I have changed the boot order to Boot Hard 1st then Rocketraid then CD rom and all variations of those devices. What am I missing? Thanks. Dave

Thanks Gabor, for the response.
I refered couple of answer records like AR# 34873 and AR# 34894, I monitored trn_reset_n, sys_reset_n, clock_locked, PLLLKDET and RESETDONE signals as suggested in AR# 34894.
Status as follows:
SYS_RESET_N = 1 (deasserted)
TRN_RESET_N = 0 (asserted)
CLOCK_LOCKED = 0 (deasserted)
PLLLKDET = 0 (deasserted)
RESETDONE = 0 (deasserted)
which means the transceiver PLL frequency is not within the predetermined tolerance. Is this problem related to the PCIe Jitter Attenuator I am using on the board to derive 125MHz from 100MHz system Clock.
Thanks & Regards

K9N Neo V3 : PCI-E and PCI-E x1/PCI VGA cards at the same time ?

Hello,
I'm thinking about getting one more VGA card to resolve my dual screen issue :
Quote
I use two monitors. PC monitor as first screen, TV is extended for watching videos.
PC : Philips 220aw (22", 1680x1050 @ 60Hz) DVI-DVI
TV : LG 42lh3000 (42", 1920x1080 @ 24Hz) DVI-HDMI
I've been trying to get smooth playback on the TV for days, but random stutter happens.
When a video (mostly HD contents) is played on the TV while using the PC monitor, things like minimize/maximize windows, page scrolls stutter and so does the video. Idle while watching videos also stutters randomly.
I tried almost every combinations of renderers/codecs/players, tried by desactivating aero and all the fancy graphics, but it didn't solve the problem.
The only way i get smooth playback on the TV, is by desactivating the PC monitor. (Using nVidia panel or "Win" key+P), so only the TV is active.
I tried with a Blu-Ray using DXVA and it was smooth.
I haven't got a chance to test with a better graphic card yet. This issue doesnt happen on XP though.
Here are the specs :
K9N Neo V3
Athlon 64 x2 @ 3Ghz
4Go DDR2-800
8800 GT 512Mo (driver 197.45)
Win7 Ultimate 32 Bits.
Corsair 450W 80+
My question is : Can i add a PCI-E x1 or a PCI VGA card on this motherboard, so each screen will have its own VGA card ?
If so, both nVidia or ATI would work ?
Thank you.

It would be one of these, if it is allowed by the K9N Neo V3.
http://www.club3d.nl/products/products_ending_page_7_with_id.cfm?product_id=154
http://www.club3d.nl/products/products_ending_page_7_with_id.cfm?product_id=223
I will try to test with an ATI card if i can find one.

HELP !!! 2nd VGA card not working

I have the following board: MSI 865GM2-LS (MS-6743G) Ver0B
I have just put into the PCI slot an S3 Virge/DX 375 VGA card and it gives me a yellow exclimation in device manager ( Win XP)
Under "General" is the following message:
This device cannot start (Code 20)
Under "Resources" I get the following:
This device isn't using any resources because it has a problem (Well No )
I am using the standard on-board Intel VGA card.
Could you please help me it get this working as i want to run 2 screens.
Thanks

Windows XP does support DUAL displays, but only with video cards with TWO outputs.
It's never been done before, as it's impossible. Unless you have a radeon 9xxx card and a ATI 9100 IGP chipset, which you don't have.
Sorry for the bad news

S3 trio 3D/2X VGA card configuration

Similar Messages

Maybe you are looking for