(s300) Keyboard and touchpad problem after upgrading to win 8.1

Hi,
I just upgraded to win 8.1 (from win 8) and I have to problems that are pretty annoying.
The first problem is with the keyboard (I think it has something to do with keyboard layout):
When I type quote mark ( " or ' ) it doesn't display it. Only when I press another key it shows.
The second problem is with the thouchpad. Before I upgraded I could "click the right mouse key" by touching the touchpad with two fingers. After the upgrade it doesn't work anymore. I tried to download the newest driver from the drivers page, but it didn't fix it.
Is there any solution?
Thanks!

Hi FishingGuy58,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some printing issues since you upgraded to Windows 8.1.  So I can better assist you, Please respond with the Printer Model number.
How Do I Find My Model Number?
Once I have the information I can better research the issue and with any luck, come up with a resolution to this issue.
Thank you for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Similar Messages

  • [K8N NEO3-F] Problem with USB keyboard and PS2 mouse after upgrading BIOS

    Hello everyone!
    I have upgraded BIOS from 1.1 to 1.4... I have Sempron 2600 (64bit) so BIOS v.1.1 did not recognise it.
    The motherboard works, but after upgrading I have a small problem with my keyboard and mouse.
    When I use USB keyboard my PS2 mouse doesn't work. When I connect PS2 keyboard mouse works!!!
    Can you tell me what's wrong?                   
    Thanks, bartull@           
    PS. Does BIOS v.1.3 recognise Sempron 64bit? Can you give me a link to it?

    I think that the problem may have been caused by flashing either with liveupdate or with winflash.  I had the problem when i used winflash correctly (shutting down all programs, checking all the boxes to clear bootblock and cmos) but had usb keyboard connected during flash.  My suggestion is to reflash with floppy to last bios version that worked using only ps2 mouse and keyboard with the following instructions:
    DOS floppy flash shall be performed with :
    awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
    (Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
    After flash is complete :
    TURN OFF PSU (don't restart) wait 15 seconds
    Turn on again , press the power button .
    Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
    Boot the system again with the floppy in the drive to let the DMI pool build and update itself .
    If that works, then reflash to the bios you tried before with the same procedure.  Once you have stable system with ps2 keyboard and mouse working, re-enter bios and enable usb and keyboard support as a lot of bios' have it disabled by default for some strange reason.
    Good luck.

  • Mail problems, slow browsing and Facebook problems after upgrading to Mountain Lion

    Hi !
    I have a 27” iMac from late 2009 which started acting really strange after upgrading to Mountain Lion.
    Before that everything works fine but now Mail does not work, will not send replies or add attachments and browsing has become so slow that it usually times out. Another strange problem is Facebook messages which does not work at all (cannot read nor send(.
    I have Lenovo laptop connected to the same network so I can benchmark and browsing works just fine on that aswell as FB messages.
    Anybody got a solution to this other than using the iMac for offline use only ?

    Hi !
    I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
    Thanks for pointing me to the right direction !

  • Apple TV and AirPlay Problems After Upgrade

    hello
    after upgrading my Apple TV 2 to version 5.0 the AirPlay icon disappeared from my iPad which is running iOS 5.1
    I spent about 2 hours with Apple support but nothing they could think of helped and they gave up
    I love my Apple TV but am wishing I never upgraded now!
    many thanks for any help

    The upgrade took that feature on my iphone4 but is still there on my ipad2

  • Hp Mini 110 1013tu Keyboard is Not working after upgrade to win 7

    Hello need help on weird happenings to my keyboard..
    Before i upgrade the Operating System From Windows XP to Windows 7 the Hp Mini 110 is working fine..
    All keys on keyboard is working and touchpad is also working.
    But after upgrading to windows 7 some keys on keyboard are not working like z,x,c,v, left ctrl and other more keys..
    what do you think is the problem??
    Hardware Issue? or Driver Issue?
    please help thank you..

    Hello @MysticDragon ,
    Welcome to the HP Forums!
    I understand some of the keys on your keyboard are not working after installing Windows 7.
    I do not see any drivers available for your notebook for Windows 7 on the HP website, so their might be some compatibility issues as it's going to rely on Windows update to find current drivers. This doesn't mean it will not work, but I cannot say for sure that it will.
    Try this:
    1. Click Start.
    2. Click Control Panel.
    3. Click Clock, Language, and Region.
    4. Click Region and Language.
    5. Click the Keyboards and Languages tab.
    6. Click Change keyboards...
    7. On the General tab, make sure English (United States) - US is selected in the Default input language field.
    8. Click on any other keyboards in the Installed services list.
    9. Click Remove.
    10. Repeat for all other non-English (United States) keyboards.
    You may also want to try rolling back to Windows XP and see if the issue persists. It is possible the issue is coincidental and not the direct result of the update to Windows 7.
    Let me know if this works!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • X220 Problems after upgrade to Win 8 Pro

     Hi all,
    Two weeks ago I upgraded OS on my ThinkPad X220 (model 428759G, BIOS 1.37) to Windows 8 Pro X64. After upgrade I did “factory reset” (function of Windows 8), because I preferred clean installation.
    Then there were installed all updates via Windows Update service. After that I installed drivers and software from Lenovo via Lenovo System Update and Avira Antivirus Premium 2013.
    Now I deal with the a few problems.
    1) Every day (several times a day) this service C:\Program Files\Lenovo\Lenovo Mobile Hotspot\LnvHotSpotSvc.exe stops working. More information is below (sorry for Czech language).
    Popis
    Cesta k chybující aplikaci: C:\Program Files\Lenovo\Lenovo Mobile Hotspot\LnvHotSpotSvc.exe
    Podpis problému
    Název události problému: CLR20r3
    Podpis problému 01: lnvhotspotsvc.exe
    Podpis problému 02: 1.0.0.0
    Podpis problému 03: 50868221
    Podpis problému 04: mscorlib
    Podpis problému 05: 4.0.30319.18033
    Podpis problému 06: 50b5a743
    Podpis problému 07: 463b
    Podpis problému 08: 463
    Podpis problému 09: System.ArgumentException
    Verze operačního systému: 6.2.9200.2.0.0.256.103
    ID národního prostředí: 1029
    Další informace 1: c260
    Další informace 2: c260c868fe2b439579a8cdd5b50df4ea
    Další informace 3: ca56
    Další informace 4: ca569b82c589dd4827724bf86448a9b7
    Další informace o tomto problému
    ID sady: d9f78c18685917da9b5639ff6386b88a (-861750507)
    2) From this webpage http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77280 I downloaded and installed the Hotkey Features Integration (version 3.84.1500). But not all of FN keys work properly.
    For example Fn+F8 doesn’t switch off touchpad or trackpoint, FN+F5 doesn’t switch off Bluetooth or WiFi – only both of them are switched off (via Airplane mode in Windows 8). If I want to switch off Bluetooth I can do it via controls in Windows 8. But I don’t understand why Bluetooth light is still on.
    3) Sometimes if laptop is woke up from sleep or hibernation mode, the system service ntoskrnl.exe (NT Kernel & System) uses CPU with 30% (fan is on high speed).  Only restart fixes this problem.
    Does anyone have similar problems?

    Mobile hotspot error confirmed (but not important for me ).
    Keys are working fine for me. BUT: I use old driver for Windows 7. The new one from January, 18th with Windows 8 look works as you described.
    Btw. I dont like Bios - express card witn USB 3.0 NEC  PD720200a is not working at all.
    http://forums.lenovo.com/t5/Windows-8/X220-USB-3-express-card-with-NEC-uPD720201-incompatibility/td-...
    Jiří Cvrk
    TP YOGA S1 .. X220, X61, T22, ms w8nd8ws

  • Safari and Mail problem after Upgrade safari 5.1.2

    After I did The Apple upgrade for safari , Mail and safari doesn't work anymore.
    Safari is always charging the start page but it never work and when I try to make a research it bugg.
    And for the Mail , I cannot receive and send mail( RSS problem).
    Before the Upgrade these two programs were working.
    Ps: For internet I download Mozilla and it work but i prefer use safari so if you have a solution it will be great.

    No message from safari , exept when I force to quit I have a problem report but i don't understand it , if you want it (it very long).
    My Mac it not old it just have 1 month and I have a second problem , with the batery the green light appears and my mac don't charge anymore but it is not charge at 100% it block a 20% for example after the green light appear and after it charge like 5 or 10 % and green light reappear ..

  • Synch and connect Problems after upgrading to latest version 7.6.1.9 itunes

    OK... this is getting painful!!!!!!!!
    1. Has worked for 6 months flawlessly....
    2. Upgraded Apple TV to the latest update - 2.0 - new look and feel.
    3. Said I now needed to update iTunes to latest
    4. Updated itunes to 7.6.1.9
    5. Apple TV still showing in iTunes. Went to synch - "got apple TV not responding port 3689".
    Apple TV could still connect to movie trailers, youtube, everything,
    6. Tried repairing iTunes 7.6.1.9 with install. Had to reenter Apple TV password. Showed in device list - still same not responding error.
    7. Uninstalled iTunes - reinstalled - along with cycling Apple TV. Apple TV showed in device list - not responding still.
    8. Verified firewalls - non enabled just for a sanity check. I've kept all firewall stuff off. Still same issue.
    9. Tried Edit/ Preferences/ Sharing/ Share my library on local network. Nothing
    10. Verified "Look for Apple TVs" enabled and mine shows in list. Still nothing.
    11. Turned Airport Expres in Apple TV off. Cycled everything... itunes, Apple Tv... nothing... Turned it back on....
    12. In Apple TV I synched to local itunes.... Apple TV now got fully erased. as I expected, but did not care just wanted it to synch to the new content.
    13. Reset the Apple TV to factory settings...... It showed in the Itunes for a few seconds, but not enough time for me to put in the password. I've recycled everything again. For the life of me I can't get it to now show consistently in the device list..... My wireless works flawlessly browsing the internet. I've done netstat checks to verify the ports and everything seems as it always has. IT HAS TO BE THE UPDATES!!!
    There should be no application conflicts, because this machine has only been used to synch my Apple TV, nothing has been installed in a while, except iTunes!
    I'm about to bring it back........
    Any other thoughts out there?

    Resolved.
    After verifying my network configurations, which was fine, I started to look at the services loaded on the machine. I noticeced BLACKICE running! Once this service was stopepd, things went smoothly.
    I do still notice that the synch lasts only for so long and then disconnects the device. I have to restart iTunes to kick start the synch again. Still a little painful, but at least I can loat the Apple TV.

  • Chrome and Safari image alignment and color problems after upgrading to 10.8

    I have just upgraded from lion to mountain lion with a clean install. My website davidandora.com now displays image sliced improperly aligned in chrome and with slightly adjusted colors on some slices in Safari. They appear fine in the same version browsers on Macbook also running the most current mac OS. I suspect this is not a browser problem since there are issues with both browsers, but what could be causing this? I have run all updates on my computer and browsers.
    Checkout this address for a clear example in both browsers:
    http://www.davidandora.com/andoracam/
    and this image for what I am seeing:
    https://www.evernote.com/shard/s16/sh/eb7ce0f4-4735-418d-8793-f867d7e4d642/b7caf 9b1a7e6671b0fd714ac3e98de08

    I will add that the current Firefox is displaying everything correctly. So strange.

  • Drop Down Lists, and other Problems after upgrade

    Noticed the problem on http://www.autotrader.com/cars-for-sale/?expandAllOptions=true&Log=0
    Drop down lists do not respond they way they did last week - before 36.0.1 upgrade.
    Choose a brand, and then you are supposed to be able to select from a list of models. Not happening.
    I have several of the privacy add-ons (see below) but they have not changed with the upgrade (unless they too were upgraded automatically.)
    FF is becoming less and less of a joy to use as the years go by.

    Note that your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
    The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
    You can check its content with a plain text editor (right-click: "Open with"; do not double-click).
    The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
    You can delete the user.js file if you didn't create this file yourself.
    You can use this button to go to the currently used Firefox profile folder:
    *Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    Windows hides some file extensions by default.
    Among them are .html and .ini and .js and .txt, so you may only see file name without file extension.
    You can see the real file type (file extension) in the properties of the file via the right-click context menu in Windows Explorer.
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved

  • Keyboard and Contact Problems after Iphone Update to 4.2.1

    Hey Guys, after i updated my brand new Iphone 4 I got a few Problems with my contacts... some Contacts were deleted (only the numbers, not the names). And I can not write ß, é, è and so on...
    All Settings set to German. But these letters are not available while holding e or s...
    Can somebody help me?

    if you dont have your contacts backed up on a computer then they very well could be gone
    this wont fix your contact issue but this is what I would try for your other issue
    to be honest these are the solutions that may or may not work..
    first thing I would try is rebooting the phone by holding the sleep/wake button and home button for 15 seconds until you see the white apple logo
    if that doesn't work I would restore from backup and if that doesn't work I would restore as new if all else fails take it to your closest apple store they may replace the phone for a working one..

  • IWork and iPhoto problems after upgrading to Mountain Lion.

    Since I have upgraded to OS 10.8.2 (Mountain Lion), iWork would not load and I can't export pictures from iPhoto.  I am using a MacBook Pro 17", early 2008, with 1 Tb hard drive and 4 Gb RAM.  Any help will be appreciated.  Thanks.

    Hi !
    I booted both the modem and router but it did not help. Then I tried using the iMac on wireless and now it works so must be something in my D-Link router.
    Thanks for pointing me to the right direction !

  • Timeouts and connection problems after 5.1(2) upgrade

    AIM/chat and some other programs are having timeout/connection problems after upgrade to 5.1(2). I am using S241 also. The connection problems stopped when the IPS was set to bypass. Rebuilt IPS and left sigs at default settings and problem is still happening. I am not seeing any of the IPs that are having the problem in the Event Viewer or on the Events in the IDM.
    Any known issues with the 5.1(2) that would cause this type of problem?

    I don't know specifically, but I did notice that 5.1(3) was released today.

  • [SOLVED]Keyboard and touchpad doesn't work after reboot from Arch

    Excuse me, but i'm a newbie. I'm not sure if this is an arch problem, but i will just post it here.
    I've beening using Arch64 and it works just fine. However, every time i reboot from arch into Windows 7 (32bit), the keyboard and touchpad will stop responding just when the Win7 splash screen shows, however the mouse works fine. Then when you shutdown the computer (from win7 now) it will take apparently longer time, and sometimes i have to press the power key 5 seconds to make it shutdown.
    It seems the correct way (to reboot from arch to win7) is to shutdown down the computer first and start it again, and everything will work fine.
    And rebooting from win7 to win7 or arch to arch or win7 to arch will work fine too.
    I'm glad to post extra information, but I've got no clue and i'm not sure what to put here.
    The laptop is a Lenovo Y450 with Intel Core Dual P7540, 4G Memory, NV GT240M. Kernel version of Arch is 3.0.6 (but the problem existed long since earlier versions) I don't have a swap partition. If you need extra information, please mention the item.
    Thanks a lot!
    Last edited by crlf0710 (2011-11-15 10:29:38)

    Hi!
    That is indeed strange. Since your external mouse works fine (which probably is connected via USB, right?) it appears that the problem lies somewhere around the internal keyboard/touchpad access. I'm not sure how this works with a Lenovo Y450, but just try to enter BIOS (in case you have not been there, you probably have to hit F1 or F2 during startup - less likely it would be delete or escape ...) and look for your keyboard/touchpad options.
    You should probably find something like "... legacy support ...". This is a relic from PS/2 times and emulates your internal input devices as PS/2 devices. So - when found, just change the setting (you cannot mess anything up, and both systems will probably not even pop up a message). My guess is it is set to "enabled" and Arch somehow messes with the PS/2 emulation in your case .... so just turn it off.
    good luck

  • Keyboard and touchpad not working after Windows 10 update

    after udating windows 10 on my probook 4440s keyboard and touchpad not working. if i press a key for 10seconds the key then shows up in the screen. and touchpad is worst. it freezes all the time barely moves. but with usb mouse it works fine 

    It's known that installing Windows from an external DVD drive on a Mid 2013 MacBook Air causes that the keyboard doesn't work after finishing the installation. The fix is to install Windows by using a USB drive. See > http://support.apple.com/kb/TS4599

Maybe you are looking for