S4 will not work with Aux port?
Headphone jack works on S4 but will not work connected to aux port in my car. Other devices work connected to it.
windyhill28 We want you to have a fully functioning device. Are you using the cable that came with the phone? Have you tried tried different cables?
Sheritah_vzw
Follow us on Twitter
@VZWSupport
Similar Messages
-
My old e-mail address was SHAW XXXXX.and worked very well with Thunder Bird mail. I recently switched to new ISP Bell and my new address is XXXXXX However with several attempts with techs ,Thunder Bird will not work with my new ISP. I had to start using Outlook.com and Outlook Express 6 for e-mail,but I really liked Thunder Bird and have numerous e-mails stored in it that I cannot import.
Outlook Express 6 is outdated and because I am running Windows XP it will not give me a newer version.I find Outlook.com confusing to me. Can you helpWhy don't you tell us what you did and why it didn't work? Start from File/New/Existing Mail Account, enter your details, click Continue, then immediately click Manual config. On the next screen enter these settings:
incoming POP server: pophm.sympatico.ca
port: 995
Connection security: SSL/TLS
Authentication: Normal password
User name: your full email address
outgoing SMTP server: smtphm.sympatico.ca
port: 587 (or try 25)
Connection security: STARTTLS
Authentication: Normal password
User name: your full email address
http://support.bell.ca/Internet/Email/How-to-use-Bell-Mail?step=3
Also, enable POP access as mentioned in the link. -
MyDAQ fails Self-Test and will not work with any software
I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip 341 KBHi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG 40 KB -
Have Thundbolt on my mac will not work with my thunderbolt drive
I have a port on my Imac, but it will not work with my ThunderBolt Drive
Agree on cables, you don't want something generic when it comes to thunderbolt in my experience. It's thos accessories that add up and they are profitable for a reason. Cheap isn't always good with accessories.
-
I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?
I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!
-
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
I bought the Keynote app for my MacBook, but when I open the application and try to install it, I get an error message saying that the application will not work with my MacBook. What gives? And, can I please request a refund? ($19.99 = a week's groceries).
Thank you for your help! - I did try looking for all available specs about Keynote on the Apple iTunes website, and found nothing that could help me. HELP!1
Close all iWork applications
2
Uninstall Keynote; this must be done with an application remover tool to delete the installation properly. Appcleaner is known to work correctly for this purpose, it is free and can be downloaded from here: Appcleaner Download
3
empty the trash
4
shutdown the Mac and restart. After the start up chime, hold down the shift key until the apple logo appears
let the Mac complete the start up procedure completely, it will take longer than usual as the hard drive is being repaired
5
Reinstall Keynote by logging into the Mac App Store using download / install -
when I connect my iphone to my mac it says itunes will not work with my iphone cause it needs version 10.6.3 itunes,. problem is i have no idea how to down load that to my iphone when my mac will not connet to it cause it nees the down load help please
Ive got the same problem, just got my iphone unlocked, and they told me to sync it to itunes to get it permently unlocked, well everytime i plug my iphone in it says; it wont work as it needs up dating to 10.6.3, which i have already updated, but still doesnt work, so how can i get my phone unlocked?
-
TS1538 Ipod Classic will not work with Windows 8. Is there a fix?
Itunes will not work with Windows 8. I have the latest version of itunes!
When will the fix be available?
When I try to Sync my ipod, nothing happens.Hi,
You can download the latest official Firefox here: https://www.mozilla.org/en-US/firefox/new/
You may also have to install [http://www.oracle.com/technetwork/java/javase/downloads/jre7u9-downloads-1859586.html Java] (choose either Windows x86 Offline or Windows x86 Online), and [http://get.adobe.com/flashplayer/ Flash] (choose the Firefox version and also deselect extras).
For the Firefox metro version, please see [https://wiki.mozilla.org/Firefox/Windows_8_Integration#Elm_Nightly_Builds this]. You can install and use it along with the other version. -
Firefox 4 will not work with my OSX 10.4.11. I cannot now get back the old version. what can I do?
Just downloaded Firefox 4. It replaced the older version on my mac but will not work with my current version of OSX.
I cannot find where I can download the older version so now I do not have Firefox. Can you help>Perfect! This works!!! Mozilla... remember many Mac users keep machines a looooong time! They are like an old Mercedes. They never die.
-
HDX 9010nr, Radeon 2600 will not work with WIndows 7
Apparently, HP is not going to support the HDX 9010nr for Windows 7. That's the bad news, the good news is that it "mostly" works.
The only big issue is that the display driver stops every few minutes and then restarts. So you sit there for thirty seconds while the machine recovers. But, it doesn’t support a second screen; and worse, every 10th time the video driver crashes; it locks up the whole machine.
ATI has a version of the Radeon 2600 software that worked with the Release Candidate (RC) of Windows 7, but it will not work with the shipped version of Windows 7. ATI recommends that you get a version from your hardware vendor. Which brings me back to the first sentence. HP isn't supporting the 9010nr.
The question is do any of the "supported" HP laptops have the ATI Radeon 2600? If so, might that work on the HDX 9010nr?
This question was solved.
View Solution.Updating the BIOS solved this problem.
-
Tried to download version 4, which replaced old 3.6, but I'm getting a message that version 4 will not work with Mac OS 10 (I have OS 10.4.11). How can I download previous Firefox version?
You can download firefox 3.6.16 here: http://www.mozilla.com/en-US/firefox/all-older.html
-
Photoshop CS2 will not work with RAW images in the Minolta DimAge A2. It use to work fine
I have used Photoshop CS 2 with my DimAge A2 for over 5 years in the RAW format. Now it will not work with RAW with my camera. I am using Vista 64.Any answers ? Thanks
It would seem to me that you have probably had to reinstall Photoshop CS 2. If that is the case, then you should download and install Camera Raw 3.7. The version that was on your install disk was updated several times. And one of those updates probably included support for your camera. Install ACR 3.7 and see if that helps.
-
2nd generation ipod touch is pretty much no good anymore? It is not able to upgrade to iOS5.1 and so will not work with many Apps in the iTunes store? Is there a way to find out if the App will work before you download?
Look to the app developer to provide that information when browsing the iTunes Store.
The iPod Touch still works, so what's your problem with it? It still works with older apps, it still does what it's intended to do.
If you aren't happy then sell it and buy a new one. -
I just downloaded Firefox 5 and it said that my Yahoo toolbar will not work with it. Is this true? If so I will not use this new version and will switch to another browser if Firefox stops supporting the Yahoo toolbar. Thank you.
Add-ons contain a range of compatible Firefox versions, and Firefox honors the listed range by disabling the add-on if you are trying to run it on an unlisted version.
I'm sure Yahoo! will update its toolbar eventually, but not every add-on maker supports beta versions of software.
Maybe you are looking for
-
Can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help
can't open adobe premiere element 11 on my MacBook Pro? which I buy it from App Store? plz help its says that its currently not availabe I have so many work counting on this programme plz help
-
My new Ipod Nano isn't recognized by itunes.
My new Ipod Nano isn't recognized by itunes. I did all of the troubleshooting and even uninstalled Apple Mobile Device. I can't get it back. Can anyone help me?
-
Can I stop a text from being read by the wrong person
Can I stop an unread text message
-
Need parts break down sheet for Sony rewritable drive DVD/CD DRX-840U
need parts break down sheet for Sony rewritable drive DVD/CD DRX-840U so I can detect which parts are failing.
-
Forgot password for my Windows 7 OS. It won't let me go sat the Windows 7 login screen.
I reinstalled Windows 7. It asks for my password (At the login Windows 7 screen). But I don't remember the password. Is there a way to reset my password without knowing my password when Installing Windows 7.