[S430] 0190: Critical low-battery error while battery full

Hi,
my one year old S430, which currently has its third mainboard and has already spent around three months of its young life in warranty repairs, shows a new problem since the last repair:
When powered on while on battery (with the battery fully charged) it beeps twice and shows "0190: Critical low-battery error", refusing to boot. This happens frequently but not always.
If i am fast enough i can enter and leave the BIOS-Setup and the problem is temporarily healed - machine boots normally.
With the first two mainboards i had never run into this. The current one had a prehistoric BIOS Version (from 2012) after replacement, so at first i thought this might cause the problem - but actually the problem persists after an update to the latest BIOS Version.
For the S431 this seems to be a known problem fixed by the latest BIOS. Any ideas/suggestions for the S430?
Oh, and PS: Thanks Lenovo for the excellent customer experience. When people ask me which Laptop to buy (which happens quite often), my answer is now "anything but Lenovo" (used to be "get a ThinkPad, be happy" before the S430).

Francoss wrote:
Where is the pinhole reset button at??
I have a T410s.
Good day.
To clarify, you've posted in an old thread for a very different, and newer generation model of ThinkPad.
(new thread created)
To answer, there's no such pinhole reset button on the T410s. It's a feature on select, newer generation models.
Hope this helps.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Similar Messages

0190 critical low battery error lenovo twist

Occasionally, I am getting this error "0190 critical low-battery". I am not sure how to replicate the error, but it only happens when I leave the laptop to fully charge. It doesn't happen every time I fully charge my laptop, but most of the times.
I am sure that it is not the new bios that causes this because I had encountered it before the bios upgrade. It seems to occur when I leaving my laptop hibernated to fully charge. To resolve I have to plug in the AC adaptor once.
On top of that I am already experiencing the "can't wake from sleep" problem with the new bios making my laptop highly unreliable
Please advise
Petros Sampatakos

I have a similar error that I think is related to 8.1 (Production version). When the battery drains and shuts down automatically, I plug it in to charge. When I am ready to use, I unplug and go to turn the machine back on and get the critical battery warning though I know the battery is fully charged. I have to plug it back in, turn the machine on, wait for it to blue screen (which it does) and then it works fine. Seems something that a bios update can address..... Hopefully someone at Lenovo sees this and cares to address

X1 0190 critical low-battery error but battery full

Hi,
Can anybody help
When starting my X1 without AC it gives me "0190 critical low-battery error" but when i connet ac an boot ith shows battery is full, and it holds for about 1.5 hours.
Any ideas?

I contacted the vendor and they kindly sent me a replacement battery which addressed the problem immediately. I did notice the new battery is a much tighter fit in the battery bay than the original so maybe that was part of the problem at least.

0190 critical low battery error lenovo T410s

Where is the pinhole reset button at??
I have a T410s.
Moderator comment: Post and replies split to new thread. Subject edited to match here and below. Was: Re: 0190 critical low battery error lenovo twist.

Francoss wrote:
Where is the pinhole reset button at??
I have a T410s.
Good day.
To clarify, you've posted in an old thread for a very different, and newer generation model of ThinkPad.
(new thread created)
To answer, there's no such pinhole reset button on the T410s. It's a feature on select, newer generation models.
Hope this helps.
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Thinkpad X201 critical low battery error 0190

I just bought a new battery recently because the one I had was completely dead, but now every time I try rebooting I get "0190 critical low battery error".
I've already updated the BIOS and I'm seeing no other results on Google to try to fix this. The only way I can boot up my laptop without getting that error is if I have the charger plugged in, but if it's not then I'll keep getting that error over and over.
Any ideas on how to fix this?
Moderator comment: Please refrain from bumping your thread(s) / post(s) more frequently than 3 days. Doing so, unfairly, pushes other members' threads downwards. Bumping post(s) removed.

Maybe it's a faulty battery. There are numerous reports about non-genuine Lenovo batteries being built with substandard or even dangerous components. Personally, I never use anything but genuine batteries in any of my ThinkPads. They are more expensive, but I've never been disappointed.
Do you have access to another known-good battery to test? Maybe a friend or colleague?
Regards.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

T400 power/battery problem (0190 critical low-battery error)

Hi everyone, I hope you guys can help me with this.
I was using my T400 and when the battery got low, I had to charge it, obviously. The T400 has these little LCD displays at the bottom of the screen, one of them is the battery (it was orange since the battery was low) and right next to it there is the display that lets you know the power cord is plugged in.
When I plugged the power cord in, I noticed the display did not work. So I was left with a non-charging power cord and a fast lowering battery power. What was to happen happened, so now my battery is completely depleted.
When I unplug the battery and try to power the laptop, there is no power at all, nothing.
When I put the battery in and try to power the laptop, I get the message 0190: Critical low-battery error.
Thanks guys !

batterybuz wrote:
I think your adapter is wrong,not the battery.
You must replace it with a ac adapter like 120w universal ac adapter
what the hell? hell no! use proper lenovo power adaptors.
Moderator edit: batterybuz is a SPAMmer, and is banned. Removed SPAM content from quoted post. Thanks cassio !
T400s - 2815RW1 + Win7 Ultimate
Don't pm me for help! That's what the forum is for. Also, Google's nicer than me. Ask him.

Error while Scheduling Full DB back up?

Hi gurus,
I got error while schedule full DB back up. I am follow all the steps.but i got this error.
1. go to DB13
2. select Day
3.select full DB backup
4.select time
5.select sid, msdb,inttape,verify backup
5.add.
our DB is MS-SQL server Data Base
client :222   user: admin
error: User not connected
2008-04-10 14:28:06.89 Server      Microsoft SQL Server 2005 - 9.00.2047.00 (Intel X86)
     Apr 14 2006 01:12:25
     Copyright (c) 1988-2005 Microsoft Corporation
     Enterprise Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2008-04-10 14:28:06.89 Server      (c) 2005 Microsoft Corporation.
2008-04-10 14:28:06.89 Server      All rights reserved.
2008-04-10 14:28:06.89 Server      Server process ID is 308.
2008-04-10 14:28:06.89 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2008-04-10 14:28:06.89 Server      This instance of SQL Server last reported using a process ID of 308 at 4/10/2008 2:24:10 PM (local) 4/10/2008 8:54:10 AM (UTC). This is an informational message only; no user action is required.
2008-04-10 14:28:06.89 Server      Registry startup parameters:
2008-04-10 14:28:06.89 Server            -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2008-04-10 14:28:06.89 Server            -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2008-04-10 14:28:06.89 Server            -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2008-04-10 14:28:06.90 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2008-04-10 14:28:06.90 Server      Detected 8 CPUs. This is an informational message; no user action is required.
2008-04-10 14:28:07.06 Server      Set AWE Enabled to 1 in the configuration parameters to allow use of more memory.
2008-04-10 14:28:07.20 Server      Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2008-04-10 14:28:07.21 Server      Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2008-04-10 14:28:18.89 Server      Database mirroring has been enabled on this instance of SQL Server.
2008-04-10 14:28:18.89 spid4s      Starting up database 'master'.
2008-04-10 14:28:18.96 spid4s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2008-04-10 14:28:19.00 spid4s      SQL Trace ID 1 was started by login "sa".
2008-04-10 14:28:19.01 spid4s      Starting up database 'mssqlsystemresource'.
2008-04-10 14:28:19.04 spid4s      The resource database build version is 9.00.2047. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid4s      Server name is 'ERPPRD'. This is an informational message only. No user action is required.
2008-04-10 14:28:19.18 spid9s      Starting up database 'model'.
2008-04-10 14:28:19.29 spid9s      Clearing tempdb database.
2008-04-10 14:28:19.37 spid9s      Starting up database 'tempdb'.
2008-04-10 14:28:19.39 spid9s      Analysis of database 'tempdb' (2) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:19.40 spid12s     The Service Broker protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     The Database Mirroring protocol transport is disabled or not configured.
2008-04-10 14:28:19.40 spid12s     Service Broker manager has started.
2008-04-10 14:28:19.42 Server      A self-generated certificate was successfully loaded for encryption.
2008-04-10 14:28:19.43 Server      Server is listening on [ 'any' <ipv4> 1433].
2008-04-10 14:28:19.43 Server      Server local connection provider is ready to accept connection on [
.\pipe\SQLLocal\MSSQLSERVER ].
2008-04-10 14:28:19.43 Server      Server named pipe provider is ready to accept connection on [
.\pipe\sql\query ].
2008-04-10 14:28:19.43 Server      Server is listening on [ 127.0.0.1 <ipv4> 1434].
2008-04-10 14:28:19.43 Server      Dedicated admin connection support was established for listening locally on port 1434.
2008-04-10 14:28:19.43 Server      The SQL Network Interface library could not register the Service Principal Name (SPN) for the SQL Server service. Error: 0x54b. Failure to register an SPN may cause integrated authentication to fall back to NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies.
2008-04-10 14:28:19.43 Server      SQL Server is now ready for client connections. This is an informational message; no user action is required.
2008-04-10 14:28:19.48 spid21s     Starting up database 'msdb'.
2008-04-10 14:28:19.48 spid23s     Starting up database 'SRM'.
2008-04-10 14:28:19.48 spid22s     Starting up database 'PRD'.
2008-04-10 14:28:20.29 spid23s     Analysis of database 'SRM' (6) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.40 spid22s     Analysis of database 'PRD' (5) is 100% complete (approximately 0 seconds remain). This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2008-04-10 14:28:23.95 spid4s      Recovery is complete. This is an informational message only. No user action is required.
2008-04-10 14:28:26.37 spid51      Using 'xpsqlbot.dll' version '2005.90.2047' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.53 spid51      Using 'xpstar90.dll' version '2005.90.2047' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
2008-04-10 14:28:26.57 spid51      Using 'xplog70.dll' version '2005.90.2047' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
2008-04-11 00:00:56.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
2008-04-11 16:44:23.89 spid112     DBCC CHECKDB (PRD) started at Apr 11 2008 4:44PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 16:52:47.53 spid107     DBCC CHECKDB (PRD) started at Apr 11 2008 4:52PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 17:00:01.48 spid115     DBCC TRACEON 3605, server process ID (SPID) 115. This is an informational message only; no user action is required.
2008-04-11 17:00:10.45 spid115     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:10.45 spid115     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:10.67 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:10.65 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:10.65 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:11.18 Backup      Tape 'Media created 3/29/2007 at 2:43 PM' was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.54 spid101     DBCC TRACEON 3605, server process ID (SPID) 101. This is an informational message only; no user action is required.
2008-04-11 17:00:15.60 spid101     Error: 18204, Severity: 16, State: 1.
2008-04-11 17:00:15.60 spid101     BackupTapeFile::OpenMedia: Backup device '
.\tape1' failed to open. Operating system error 2(The system cannot find the file specified.).
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP1(
.\tape1)'. This is an informational message. No user action is required.
2008-04-11 17:00:15.60 Backup      Error: 3041, Severity: 16, State: 1.
2008-04-11 17:00:15.60 Backup      BACKUP failed to complete the command BACKUP DATABASE PRD. Check the backup application log for detailed messages.
2008-04-11 17:00:15.60 Backup      Unnamed tape was dismounted from drive 'R3DUMP0(
.\tape0)'. This is an informational message. No user action is required.
2008-04-11 17:02:57.57 spid114     DBCC CHECKDB (PRD) started at Apr 11 2008 5:02PM with Logfile: C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\CCMS_CHECK_DB_HIST_2008.txt
2008-04-11 18:30:37.75 spid112     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 46 minutes 14 seconds.
2008-04-11 18:54:52.10 spid114     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 1 hours 51 minutes 55 seconds.
2008-04-11 18:55:25.00 spid107     DBCC CHECKDB (PRD) WITH no_infomsgs executed by NT AUTHORITY\SYSTEM found 0 errors and repaired 0 errors. Elapsed time: 2 hours 2 minutes 38 seconds.
2008-04-12 00:00:30.75 spid17s     This instance of SQL Server has been using a process ID of 308 since 4/10/2008 2:28:23 PM (local) 4/10/2008 8:58:23 AM (UTC). This is an informational message only; no user action is required.
This is error
anybody help me.
Regards,
balaram
Edited by: balaram reddy on Apr 14, 2008 8:44 PM

If your ECC6 is on SP12 and above, use t-code : DBACOCKPIT or DB13OLD
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0dc0752-2502-2a10-2a93-94823467ca79

0109 Critical low battery error

Brand new X230 (2 days old) Been using the laptop fine yesterday, internal battery drained to 0 %. Slice battery showing 87 % no issues.
Shutdown the laptop. however upon attempting to reboot the error presented and the machine would not boot until AC power connected. Upon boot up checked battery capacity and slice showing 87 % still. Once booted I was able to remove external AC and the machine continued to work quite happily in the external battery.
All updates installed - so how to deal with this ? Is it a firmware issue of some kind ?
Solved!
Go to Solution.

Solved. not sure how or why but the lock switch (which is meant to be automatic) was not engaged. With more than a little fiddling I got it to the locked position and then the machine would boot when the primary battery is flat.

Getting Error while importing FULL SLD in PRD Server

Hi Experts,
I am trying to import FULL SLD into Production server from QA server. I have exported full SLD from QA server and then try to import the same in the Production. But, while importing it gives me a warning <b>"The selected ALL 1.0 full import belongs to the export line ALL which is not compatible with the export line(s) SAP_CR of previous imports. The data of the selected import may possibly interfere with the previously imported data."</b>
And it shows two options: CANCEL IMPORT, IMPORT ANYWAY
**All the servers are on Xi 7.0 sp08
Kindly Help...

Hi Ajay,
These errors as mentioned are because of different CR versions and as mentioned in the blog:
<i>1) the source system is not defined in the SLD 2) the target system is not defined in the SLD 3) the association already exist 4) the source system and the target system are in the system business system group</i>
Regards
Vijaya

[Q] ORA-30510 error while doing full database import

We have ORACLE 9.2.0.6 on Redhat LINUX AS 3.4. while we doing "full database import" there has ORA-30510 come out. I searched Metalink and Google, but not found much information. The error messages on import are:
. importing OUTLN's objects into OUTLN
. importing SYSTEM's objects into SYSTEM
. importing TKOWNER's objects into TKOWNER
IMP-00017: following statement failed with ORACLE error 30510:
"CREATE TRIGGER "TKOWNER".TRIG_DONOTANALYZE before analyze on schema decla"
"re begin if sys.dictionary_obj_name = 'MYWTKEMPLOYEE' then raise_ap"
"plication_error(-20101, 'Do Not ANALYZE MYWTKEMPLOYEE'); end if; end; "
IMP-00003: ORACLE error 30510 encountered
ORA-30510: system triggers cannot be defined on the schema of SYS user
. importing SYS's objects into SYS
. importing TKOWNER's objects into TKOWNER
About to enable constraints...
Import terminated successfully with warnings.

877410 wrote:
Hi I get the following ierrors while importing a schema from prod to dev database... can anyone help ,thanks!
impdp system DIRECTORY=DATA_PUMP_DIR DUMPFILE=abcdprod.DMP LOGFILE=abcdprod.log REMAP_SCHEMA=abcdprod:abcddev
ORA-39002: invalid operation
ORA-31694: master table "SYSTEM"."SYS_IMPORT_FULL_01" failed to load/unload
ORA-31644: unable to position to block number 170452 in dump file "/ots/oracle/echo/wxyz/datapump/abcdprod.DMPpost complete command line for the expdp that made the abcdprod.DMP file

Error while taking Full DB Backup

Hi,
We had Multiplexed the Archive Log File to default location(Flash Recovery Area) and log_archive_dest_1=/u02/app/oracle/oradata/orcl/archive
As too much of archive log's are generated we had removed the log_archive_dest_1.
We had scheduled full DB backup every sunday and incremental DB backup everyday(midnight) through OEM.
I am backing up all the archive log's and after each backup (incremental and full DB backup) we are deleting all Archive logs backed up.
The Full DB Backup failed as it is still trying to backup archive logs from log_archive_dest_1(/u02/app/oracle/oradata/orcl/archive)
Please find below the error log file generated after backup failed.
RMAN> backup device type disk format='/u02/backup/scheduled/Full-ARC_%d_%t_%s_%p' tag 'BACKUP_ORCL_000022_091608120501' archivelog all not backed up;
Starting backup at 16-SEP-08
current log archived
using channel ORA_DISK_1
using channel ORA_DISK_2
skipping archive log file */u02/app/oracle/oradata/orcl/archive*/1_8459_639421762.dbf; already backed on 01-SEP-08
skipping archive log file /u02/app/oracle/oradata/orcl/archive/1_8460_639421762.dbf; already backed on 01-SEP-08
skipping archive log file /u02/app/oracle/oradata/orcl/archive/1_8461_639421762.dbf; already backed on 01-SEP-08
skipping archive log file /u02/app/oracle/oradata/orcl/archive/1_8462_639421762.dbf; already backed on 01-SEP-08
archived log /u02/app/oracle/oradata/orcl/archive/1_8463_639421762.dbf not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 8463
archived log /u02/app/oracle/oradata/orcl/archive/1_8464_639421762.dbf not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 8464
archived log /u02/app/oracle/oradata/orcl/archive/1_8465_639421762.dbf not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 8465
archived log /u02/app/oracle/oradata/orcl/archive/1_8466_639421762.dbf not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 8466
archived log /u02/app/oracle/oradata/orcl/archive/1_8467_639421762.dbf not found or out of sync with catalog
trying alternate file for archivelog thread 1, sequence 8467
Please suggest me the possible outcome
Thanks and Regards
Amith

Hi,
The Archive log's has occupied full Hard Disk space so i changed the status of DB to NoArchive Log mode and deleted all the archive files available at "/u02/app/oracle/oradata/orcl/archive" using OS command.
Now I changed the DB to Archive Log Mode and now using RMAN to delete All Archive files which are backed up.
backup incremental level 0 cumulative device type disk tag '%TAG' database include current controlfile;
backup device type disk tag '%TAG' archivelog all not backed up delete all input;
Thanks
Amith
Edited by: amith r on Sep 17, 2008 3:00 PM

Error while saving full path in Console properties

Hi All,
to open the mounted servers automatically from .mcs file i tried to change the target field in the console properties by R clicking and selecting properties from the console shortcut Icon from desktop
i mentioned the full path with _f as prefix
Eg: -F C:\documents and settings\SAP MDM Servers.mcs
Error : "Name -f specified in the target box is not valid. make sure the path and file name are correct."
Please help
Regards,
Sharma

Hello Deepak
I tried putting it as _F insted of -f but i am getting the same error. i have saved it on the desktop and i am mentioning the complete path of the .mcs file.
i am still getting the same error
Regards,
Sharma

BI Apps error while performing Full Load....

Hi Experts,
I am trying to implement BI Apps on my laptop......with 2 vms.......one with BI Apps, Biee, Informatica, and Dac; the other VM has EBS R12.1.1 with Vision demo database.......I am following below blog post from Deliver BI blog...
http://deliverbi.blogspot.com/search/label/OBIA%20Setup%20Steps
PDF: http://www.box.net/shared/7q0gavzd63
I am now on page 73.....I clicked Run Now, and when I see the status of the Task it give an error.........
Status Description:
Some steps failed.Number of incomplete tasks whose status got updated to stopped :0
Number of incomplete task details whose status got updated to stopped :1721
Complete Description in the Description tab:
ETL Process Id : 21627633
ETL Name : SHA_LOAD_HR
Run Name : SHA_LOAD_HR: ETL Run - 2011-02-13 22:32:05.907
DAC Server : localhost(biapps)
DAC Port : 3141
Status: Failed
Log File Name: SHA_LOAD_HR.21627633.log
Database Connection(s) Used :
     DataWarehouse jdbc:oracle:thin:@biapps.ven.com:1521:orcl10
     ORA_R1211 jdbc:oracle:thin:@ebsr12.ven.com:1521:VIS10
Informatica Server(s) Used :
     Oracle_BI_DW_Base_Integration-Oracle_BI_DW_Base_Integration:(10)
Start Time: 2011-02-13 22:32:05.922
Message: Some steps failed.Number of incomplete tasks whose status got updated to stopped :0
Number of incomplete task details whose status got updated to stopped :1721
Actual Start Time: 2011-02-13 22:32:05.922
End Time: 2011-02-13 22:34:01.503
Total Time Taken: 1 Minutes
Start Time For This Run: 2011-02-13 22:32:05.922
Total Time Taken For This Run: 1 MinutesLog file mentioned in the above description:
http://www.mediafire.com/?j9br75v6ecga8h6
Below are the screen shots of the Tasks tab:
1st half: http://img11.imageshack.us/i/111bud.jpg/
2nd half: http://img340.imageshack.us/i/222hj.jpg/
I successfully followed each and every step mentioned int he above document upto page 72.....but on page 73 i got the above errors........
for source: I used apps/apps@VIS account........where VIS is the instance name for Vision demo database........but in the above document I was asked to give ebs12 as the connection string name.........I am able to loin to apps/apps@VIS account from my biapps VM........
Can anyone please help me in running Full Load on EBS R12.1.1 Vision Demo database.........please.....
Thanks in advance,
DK
Edited by: user12296343 on Feb 13, 2011 9:00 PM

Hi DK,
It was combination of couple of things,
Did you apply the cumulative Patch 10052370?
Also check your steps from below links
http://gerardnico.com/wiki/obia/installation_7961
http://ahmedshareefuddin.blogspot.com/2010/12/installation-and-configuration-of.html
Hope this helps,
regards,

Random Low Battery Messages

Hello All,
I recently upgraded to iPhone 3G and I notice that I get that critically low battery warning popping up at least once a day. It tells me my battery is red and I need to plug it in like NOW. The thing is, I push the standby button twice (once to put it asleep, once to wake it back up) and it shows my battery as fine. It happens at random levels, sometimes almost all the way full, to sometimes around 20-30% full. The odd thing is that it will do it when I am not using the phone. I just see it turn itself on and pop up that screen as it sits on my desk. I know the battery has got charge because I will use it for a while after it happens and the battery indicator shows a normal charge. I just don't know why it pops up with that message. Any suggestions? Thanks.

Hi Train448,
Are you using any 3rd-party accessories with the iPhone?
Try restoring the iPhone as described here: http://docs.info.apple.com/article.html?artnum=305744
If you continue seeing the message after restoring the iPhone it may need hardware repair. Make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
-Jason

Battery critically low , update will resume after battery is 20%

My playbook was dead for many days. After charging it for several hours it used to turn on but there was no charging at all so I read in the support that I could try to update OS. I updated OS using blackberry desktop software but after leaving for sometime I got the above message. THen i disconnected from the charger to see if the charger was working and the sceen went black and then when i connected the charger Red lid turns on for some time then a battery sign with red bolt comes for few seconds then green led light starts blinking. After about half hour the palaybook starts but again the same message comes that the battery is critically low and update will resume when battery is 20% charged. I tried all the options listed in the forum but havenot bought a rapid charger.
Can anyone help me please. It is not under waranty period.

Hi playstone,
Try leaving your PlayBook plugged in for a couple of hours again, then while the PlayBook is plugged in, press the power button for 15-20 seconds to try to force it to reboot. Try this a few times as I know that's helped for some other users (it didn't want to go with the first restart attempt, but it did work after the 3rd or 5th attempt). If that doesn't work, can you get access to another charger (a rapid charger would be best, but it may be worth trying another charger)? That may help in the event that your current charger is no longer working properly. Even try going into your local Staples, Best Buy or other and see if they'd have a charger you could just try out.
Good luck and keep us posted. If nothing works, let us know as there may be some other things we can try still.
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

[S430] 0190: Critical low-battery error while battery full

Similar Messages

Maybe you are looking for