S430 Windows 8.1 Graphics/Video Problems?
I upgraded to windows 8.1 from 8 yesterday on my Edge s430 and am now regretting it whole heartedly. I use an extra monitor usually, but now if i connect it (its a sumsung ca550 with in-built usb/ethernet hub) my laptop stops responding, occasionally going to a blue screen.
Also, if I'm playing a youtube video and move the mouse around, flickering rectangles appear all over the laptop screen. Strangely, this doesn't happen if the video is full screen.
Not sure if anybody here can help/explain what's going on. If so it would be greatly appreciated!
I'm having same issues with E530 and they are extremely annoying.
Yesterday after upgrading to Win 8.1 screen started flickering, every few seconds random black/colorful/white rectangles show up in random spots.
I usually work on two external lcds (usb + hdmi) but that happens also when they are disconnected. I have all drivers up to date (nidia 610M + intel hd3000).
Are there other people experiencing above? I don't have time to reinstall to Windows 8 so any solution would be highly appreciated.
Similar Messages
-
Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit
Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
But I Wont be Able To Play Games & Other Apps Please Solve This And Give Me Link For Video Card Driver Or
Graphic Card Driver For Windows 7 32-bit (x86)
THANKS
PROFESSOR TOM........................................Hi:
See if this W7 32 bit graphics driver works...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en... -
Thinkpad Edge S430 - Windows does not detect external display connected via HDMI
On a Thinkpad S430 with HD4000 integrated graphics, an external display connected via a HDMI cable is not detected at all when using Windows. The system is fully updated as of the time of posting this message, both via the Lenovo Update tool as well as Windows update.
The Intel driver version is 8.15.10.2696. It appears that this is the latest version, since it does not offer an update when I try to auto-update it via Device Manager.
NB: I am running Ubuntu 12.04 with kernel 3.4.0 on the same machine, and the external display works perfectly fine with this software configuration.
Hence I think that it's very likely that this is a Windows-specific driver issue.
Would Lenovo happen to have a driver update in the works? Alternatively, I will be thankful for any suggestions about possible resolution of this problem.skn2011 wrote:
My Macbook Pro notbook 13.3" does not detect external display throught it's mini display port to HDMI connector when connected to Sony Bravia 32" LCD TV.Can anyone help me get the answer as i tried reading everywhere on internet and none does not seems to work.Please help me out guys.
Are you using the Apple adaptor or a 3rd party -
After Loading Lion I now get 5 windows w/ a graphic of a Red Stop sign with an ! mark and the following text message:
"DAVE Networking
Dave kernel extensions could not be loaded! Error
71 - Too many levels of remote in path."
I have uninstalled DAVE and used Clean App to remove trace elements of program, however I still get the message and am unable to eliminate the error messages. When I click OK the message goes away briefly and then comes back up.
Any solutions would be great.Dave,
Thanks....What I did was load the free eval version of Dave 9.0 and then used the uninstaller which must have deleted the kernel giving me the problem.
Thanks for the response.
Razor -
hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
RosoneIt is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer. -
Regarding Pages charts, when I try to 'build' a 3D chart all I get is little dots but not graphics. No problems with 2D charts though. Guess my question is "Help?"
Sorry for the delay getting back to this.
Thanks to Fruhulda and Peter for their comments regarding the refusal of Pages to let me make 3D charts.
In answer to the questions put to me in this regard :
1. Pages version : Pages '09 v.4.1 (923)
2. Mac O/S : v.10.6.8
3. 3D chart : Can't find a 'name', but upright bars with rounded corners ???
4. Moved apps : Not that I'm aware of! All should be as installed off the disc.
5. A note : I have been able to create these in the past - related to a SW update?
and ... can create these charts perfectly in Keynote (go figure).
Thanks to all.
CM -
Windows 8/8.1: Printer Offline Problems
Windows 8/8.1: Printer Offline Problems
Are you getting an error that your network or wireless printer is offline when you try to print?
When you print to your network printer, does it fail, and when you check the printer status it says Offline?
Do you have problems printing to your wireless printer after your PC has been asleep?
If you answered YES to any of the above questions, then you have a problem with your network printer being offline. After some investigation into this problem, we recommend updating windows. Run Windows update to check that your version of Windows 8 is up to date.
There are a few windows updates that may help with this problem
1) Install this Microsoft patch to make sure this private-public-private network issue does not reoccur. It is part of the April 2014 Windows Update package for Windows 8.1 and Server2012 R2 (http://support.microsoft.com/kb/2919355).
2) Install this Microsoft patch for the WSD service. http://support.microsoft.com/kb/3000461
If this does not help, then please follow the steps list below which will give you a Workaround that may help with this problem.
Assign the printer a static IP address
An IP address is an Internet network address that the computer can use to communicate with the printer. Enter a static IP address to make sure that the wireless connection remains stable. Follow these steps to assign the printer a static IP address.
Get the printer IP address.
Press the Wireless button on the printer control panel to view the network settings.
Access the Network menu on the printer control panel.
Print a Network Configuration Page or Wireless Test Report page.
Once you have the printer's IP address, open a new web browser window or tab.
Type the IP address in your web browser's address bar, and then press Enter.
Make sure that you type the IP address into the browser's address box. If you type it into a tool bar search box, the EWS will not open.
If the message 'There is a problem with this website's security certificate' appears in the web browser when you try to open the embedded web server (EWS), or when you navigate within the EWS, click ' Continue to this website (not recommended)'.
note:
Choosing 'Continue to this website (not recommended)' will not harm your computer while you navigate within the EWS for your printer. If you encounter this error outside of your printer's EWS, your computer could be at risk.
If the browser fails to open the EWS after you click 'Continue to this website (not recommended)', refresh the browser window.
The Embedded Web Server (EWS) for the printer opens and confirms that the printer is on the same network as the computer.
In the EWS, click the Network tab.
In the Wireless section, click the Network Address (IP) or IPv6 configuration, depending on your network setup.
Click Manual IP, and then click Suggest a Manual IP Address. A manual IP address, Subnet Mask, and Default Gateway displays.
After the manual IP address populates, click Manual DNS Server.
note:
Keep a record of the manual IP address for reference.
On the Network Configuration Page you printed earlier, locate the DNS Server addresses, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
If the DNS addresses are not listed on the Network Configuration Page, or if you have trouble accessing the network or Internet with the original DNS addresses, use one of the following methods to obtain DNS addresses.
Method one: Use publicly available DNS server addresses
Configure the printer using publicly available DNS server addresses. To find available DNS server addresses, search online for 'public DNS servers'.
After you find public DNS server addresses, type the addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Method two: Get the network DNS information via your computer
Select your operating system, and then use the following directions to obtain the DNS server addresses.
Right-click the Start button () or the lower left corner of the screen, click Run, type cmd, and then press Enter.
When the command window opens, type ipconfig /all, and then press Enter. Information about the computer's network displays.
Scroll to and locate the DNS Server addresses.
In the EWS, type the DNS addresses in the Manual Preferred DNS Server and Manual Alternate DNS Server fields, and then click Apply.
Print a test page to make sure that the printer's IP address is the same as you assigned.
Right-click the Start button () or the lower left corner of the screen, click Search, type HP and click your printer in the results. Click Utilities, and then click Update IP address to update the address in the software.
Adding a Wireless Network Printer using Control Panel
Go to Control Panel and choose Devices and Printers
Click on Add Printer
The PC will search the local network and display the network printers.
Choose the printer and select Next
The system will then try and auto select a compatible driver
Select the current driver and Click Next
The system will then ask for a name for the printer. The user can change the name and then click Next
The User can then choose to share the printer
The user can select to make this new printer the default and then click Finish.
The new printer is now setup but this printer may be using the In OS driver (Class) rather than the HP Full Function driver.
To change the printer to use the HP Full Function driver follow the following instructions. I would recommend changing the driver to the HP Full Function driver as the User can then use features such as Custom paper sizes.
Go back into Control Panel and choose devices and Printers, right click on the newly created printer and choose Printer Properties
Choose the Advanced Tab
Click on the driver section drop down and choose the Driver for the printer that does not have the words Class driver after it.
Click apply and then OK and the driver will be changed to the HP Full Function driver for the printer.
The user should try this configuration and see if they still experience problems.
Please Note:
DO NOT Remove the Original Printer Icon from Devices and Printers as the HP Printer Assistant will stop working.
JonW
I work for HPI have the printer offline problem. It started when I ran out of toner. I have now installed a new toner cartridge.
Your solution does not help me because I have tried to install Win8.1 and it failed.
I would just reinstall my printer but I have a long list of items in my print queque and I don't want to lose them.
Is there another solution?
Or is there a way I can save the print queue?
Mike -
IPOD model A1059 appears frozen and is unresponsive to all click wheel entries. Reset does not work. Does not show up in ITunes or in Windows Explorer. What is the problem and is there a fix?
If you are unable to reset the iPod (assuming the hold switch is not in the On position either), then you'll have to let the iPod's battery fully drain. Then connect it to a charger and leave it to charge for a couple of hours.
B-rock -
WIndows 8.1 printer error: windows cannot print due to a problem with the current printer set up
My HP OFFICEJET 8500 PRO was working just fine wirelessly until I installed the Windows 8.1 update from the Microsoft. Now I cannot print at all. I get an error that says, "windows cannot print due to a problem with the current printer set up". I have tried reinstalling and a ton of other solutions to no avail. Can someone PLEASE Help!
Hello there, @jesseangelique ,
Welcome to the Community!
I would love to help you with the printing issue you're having, since the Windows 8.1 that was done.
Please run the Print and Scan Doctor. Write me back with the results or post a screen shot of the results and I will have a look at them.
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
Also, let me know which Officejet 8500 Model you have:
HP Officejet Pro 8500 All-in-One Printer - A909a
HP Officejet Pro 8500 All-in-One Printer - A909b
HP Officejet Pro 8500 Premier All-in-One Printer - A909n
HP Officejet Pro 8500 Wireless All-in-One Printer - A909g
Hope to hear from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
I can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error.
can't open iTunes on my pc in windows. I keep getting a Problem event: BEX error. How can i fix this? need very detailed step by step instructions on how to fix. thx
Check out this discussion link:
https://discussions.apple.com/thread/2777410?threadID=2777410&tstart=15 -
I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?
Did you tried uninstalling and then installing it again?
Ankush -
Hi, at the moment I can only seem to watch a rented movie once - previously I used to be able to watch it as many times as I liked during the 48hr window. Anyone else have this problem?
This doesn't seem right.
I paid for a rental and downloaded an HD movie, Avatar. I could start watching within about a minute, it played without skipping a beat.
My wife started watching the movie the next night and got about half way through.
The next day, she tried watching the rest, and selected the film and clicked on "resume watching".
But instead of streaming and playing like it should, we got the spinning wheel of death followed by a message "Ready to play in 1 minute" which soon became "Ready to play in 2351 minutes"!
Additional information that I can add is that it was Sunday afternoon which is peak time for internet usage and I'd just exhausted my data allowance before the speed limiting kicks in. Basic internet using browsers at that time was really slow.
So it was as though the movie we were going to resume watching was going to be downloaded from the iTunes Store again, and since my connection had been speed limited, it was going to take forever. I thought you downloaded a rental to your hard drive and it deleted itself after it expired? So any subsequent streaming to AppleTV would be coming direct from your hard drive. It shouldn't have been affected by the speed of my internet connection at that time, surely. Anyone else experienced this?
Actually, I just noticed this post, I'm sure it's related...:http://discussions.apple.com/thread.jspa?messageID=12398832� -
The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened ans i see always this information on my mac? what can I do?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
I can't download the new version of iTunes. Halfway through the installation a pop up window appears saying, "There is a problem with this Windows installer package. A program run as a part of a set up did not finish as expected. Contact your support personnel or package vendor.
Got exact same problem, was told to delete all old apple, quick time and bonjoir from computer then it would work. I use a programme called malware bytes and this takes everthing out of your computer right down to the roots but unfortunately I still have same problem
-
Newly installed Acrobat will NOT open from Creative Cloud app on Desktop using Windows 7 Pro - what's the problem?
the cc desktop app is used to install and update cc programs (and a few other thinigs). but that does not include 'opening' the installed programs.
click your start button or your program files directory to find the acrobat executable to launch acrobat (and any of your other apps, adobe or otherwise).
Maybe you are looking for
-
Resource Adapter Deployment Error (Resolved)
This Problem Has Been Resolved. I'm trying to develop an application using Inbound resource adapters on Weblogic 9.2.1 . I have the resource adapter and the MDB packaged separately. The MDB appears to deploy successfully, but the resource adapter doe
-
Authorization for UB document type in PO create
Hi All, We wanted to restirct some user from creating PO other than UB. We want them to give authorization only for UB document type in ME21N. What is teh best way to make it work? Thanks for your support. KHAN
-
Hi All, i will like to test this FM RH_STRUC_GET. i thought it is used to get the position and organizational unit the user is linked to I proceed as follow: Se37 i filled: 0type:S 0BJID:persnr. WEGID:A008 Flag:? PLVAR:01 Begda:24.08.2010 ENDA:24.08.
-
Which SPAM/SAINT for our System
Hi All I want to apply SAP SP-Stack on our ECC6 System. When I execute TX-SPAM I got following information "Support Package Manager - Version 7.00 / 0023" on service marketplace when I click "SAP SPAM/SAINT UPDATE" I have following options SPAM/SAINT
-
Trying to buy a phone from BB, need some help.
I called Tmobile this morning to try to clarify some pricing on the Nexus S. My goal is this. 2 Nexus S phones 750 Shared Minutes Unlimited Text Unlimited Internet Problem One: I called T-mobile because I get a discount on their service because of my