S5-1020 Slimline has intermittent resets, then will not reboot. Error code BIOHD1.

My system reboots automatically at random times. The start-up tries to find a boot drive but cannot. Running Diagnostics from boot displays the following
CPU test: Passed
Connection Test: Failed
Error Code BIOHD1
Memory Test: Passed
Warning: Drive not detected.
Suggestions: Turn off computer. Verify cables are connected.
Please Contact HP support.
I am running Windows 7 Home Premium on a S5-1020 HP Pavilion Sllimline.
This problem has occured sporadically since early Sept. but is becoming more frequent. I received the system on July 25, 2011. Purchased from Staples.com

Use sc command to put Windows Module Installer to disabled in your script after Enabling Hyper-v Role. When the system completely restarts, change it to Manual or Automatic.
Note: I have not tested it, it is just my thought, if it does not work or something unexpected happens, it means your issue cannot be fixed this way.
Juke Chou
TechNet Community Support

Similar Messages

Printer will not work: error code 0xc19a0022

Printer will not work: error code 0xc19a0022

Hello citizenED,
Welcome to the HP Forums.
I see that you are getting the error code " 0xc19a0022 " .
I do have a few steps that we can try.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with a 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error ...
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

My ITunes will not work error code 2503

window XP cannot uninstall ITunes. ITunes will not operate. error code 2503

Hello, bearbassman.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through when receiving this error.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

HT4528 my month and a half old iphone 5s had a blue screen and now just has a black screen. will not reboot or restore through itunes. what do i do?

my iphone 5s has been showing a blue screen and shuttiing down. yesterday night it did just that and now will not reboot or even restore through itunes.
what should i do?

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

Frozen ipod after new updates, will not recover, error codes 1601 and 1602

i updated my ipod last night, was working fine, turned off, then on again this morning. was working fine this morning for a while, then went completely blank, will not start up, just completely dead. i have tried to restore,several times and get error code 1601, and 1602. have tried restarting my computer,checking for updates, restarting my itunes, using another computer, tried another lead, and everything else suggested by support. it will just not do anything. has anyone got any suggestions, please.

I would suggest that you put your iPod into the recovery mode and restore it. Next time something like this, it is better to start with the more basic troubleshooting steps first before trying to restore. The two easiest are restart and reset.
Try these steps with your touch.
1. Unplug the device from your computer
2. Turn the touch off - hold the Sleep/Wake button down until you see the red slider and turn the device off. Note: this may not work. If not, go to the next step.
3. Start iTunes
4. Hold the Home button down and keep holding it down while you plug your iPod back into your computer.
5. Keep holding the button down until iTunes tells your "that an iPod in Recovery mode has been detected".
6. Let go of the button and follow the on screen instructions to restore the touch.

Latest update for creative cloud will not install error code 1 HOW TO FIX THIS????

I CAN NOT GET cc UPDATE STALLS AT 43% AND GIVES ((ERROR CODE 1 )) AS THE REASON??????

1) Open Control Panel and Navigate to Control Panel\Programs\Programs and Features .
Under Program and Features list, locate the option : Adobe Creative Cloud and uninstall the same.
2) Open C:drive and navigate to C:\Program Files (x86)\Common Files\Adobe.
Open Adobe folder and delete folders named Adobe Application Manager and OOBE.
3) Navigate to C:\Program Files (x86)\Adobe.
Open Adobe folder and if present delete Adobe Creative Cloud folder.
4) Press Windows button (located between Ctrl and Alt buttons) along with R button together at a time , you will get a run command window.
Type in below command and hit 'Enter' key.
appdata
Then navigate to Local>Adobe.
Open Adobe folder and delete folders named AAMUpdater and OOBE.
5) Click on the below link and download Creative Cloud setup file and use the same to install the Creative Cloud Desktop application.
https://creative.adobe.com/products/creative-cloud

Ipod touch stuck in recovery mode and will not restore. error code 3194

ipod touch stuck in recovery mode, will not restore and comes up with error code 3194, itunes is up to date, please help

Hi @rchangel - Thanks for the ideas...
Yes - it won't let you install the 32 bit version on a 64 bit machine.
I've had a cursory look at the SP1 release notes, and couldn't spot anything vital - what critical stuff do you know of in SP1?
I don't want to have to go through all the pain of setting up VM's, reinstalling iTunes, getting all my album art back in etc. (though I could, as I do have Win7 pro). I've also heard that running iTunes in Windows 7 compatibility mode might help. Can anyone confirm whether that actually works?
I think it's in Apple's gift to fix this issue, given that they say that they support Windows 7. So far I've had no feedback from a mail I sent to Apple, and the number of users reporting this problem keeps going up and up.
I want Apple to recognise that there is a problem, and then I want them to fix it.

IPhone will not update (error code 1) will not restore even in DFU mode (error code 1)

I bought the iPhone 4S from a friend, and I came to wiping it manually from the handset, no problems found however during the initial steps the iPhone was unable to validate on the apple servers (with the carrier stuck on searching). So, I plugged the phone into my trusty laptop installed Itunes fresh and proceeded to restore. The process gets to the later part of the validation and throws up an Error Code 1.
I'm aware (from searches across the internet) that error code 1 is typically found in phones with tampered hardware/software e.g. Jailbreak, unlock etc. My friend is not tech savvy and doesnt have a clue about these things so I'm sure the phone is 'as is'.
So i proceeded to troubleshoot the issue:
I edited my hosts file to point to the apple validation server (and checked it allowed connections to gs.apple.com within my browser - successful).
Now as the handset is stuck in recovery mode (with the usb and apple logo) I tried to restore via regular Recovery mode - no sucess (error 1)
Entered the phone into DFU mode (which, in essence ALL of google preaches is the way to restore regardless of issue) same error occurred.
So i looked into 3rd party applications that could force it to restore or perhaps allow a functional end product.
Redsnow (latest edition only provides restore for up to iOS 6.1.somethingorother) that produced a dead end.
Pangu restore facility (latest edition for iOS 7/some 8 models) hanged at the same place as the apple loader.
I've tried flushing my DNS cache, and verified the Date/time on my computer and router is correct.
I refuse to accept the phone is nonfunctional but am rapidly running out of ideas as how to
a) restore it to the iOS it initially had
b) update it forcefully and have iOS 8
c) install a custom rom in the hope some fuctionality exists enough to restore it again.
Please inform me of any suggestions you might have,
regards Jack.
PS. Further information; This has been attempted on 2 seperate windows workstations both running windows 8.1 up to date.
The USB cable is an unofficial one but has caused no issues in the past on another iphone that ive restored.

Do you have the latest version of iTunes? Did you check for anti-virus software? One of the sections talks about interference from anti-virus software and firewalls. Also, you should not have to make any changes to your Host file unless your computer has been used to jailbreak a phone. I worry because you were using a number of software applications that are designed for jailbreaking devices. Excerpt from this support document. Get help with iOS update and restore errors - Apple Support
Check for hardware issues
Related errors: 1, 3, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer might have a hardware issue that stops the update or restore from completing.
Check that your security software and settings aren't blocking your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Make sure that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.

I pod 160GB classic will not sync error code 1437, Help please !

Hi, None of my ipods will sync with i tunes, error code 1437, running on windows XP have tried instructions to delete Lockdown folder but cannot find Application Data folder

I can't find any solution for this, you can try to call Apple or visit an Apple Store / Premium Reseller.

System freezes and then will not reboot

About two weeks ago I opened my MacBook Pro, just before a business trip only to find that it would not start, just a grey screen, if I left it long enough then the apple logo appeared and the loading circle, but that is as far as I got. As I was flying to Dubai and that is where I bought it I took it back to the MacStore there. They said that I would have to reinstall the operating system. After two hours attempting this they sent me away with the discs that I had to borrow from them and said I should do it myself. I flew on to Saudi ad attempted the reinstall there. It failed due to a software error. I attempted the process again, with the erase option, same result. A friend used the install disc utilities menu to check the hard drive when I was informed that the hard drive had failed.
I went to what I thought was an authorised Apple dealer CTS (Computer Technology Services of Jeddah and they replaced the hard drive. It worked for about 2 hours and then froze and refused to restart. The computer was quite hot. Once left to cool it would then restart but not until then, but each time I do this the time it runs is less and less. I have replacement batteries from the recall, so that is not the problem, but I only obtained them after the hard drive replacement.
I do not appear to be able to get any support from Apple as they say the computer is out of warranty - I don't understand why as I bought it in May from what I thought was an authorised retailer in Dubai. I live in Iran and there is virtually no support here, just other ex-pats with Macs.
The other problems that I have is that since the change of hard drive all of my music and programs have been de-authorised. The Mac also seems to corrupt programs I keep having to reload them from my back up LaCie hard drive (which fortunately I did a full back up to just before the thing failed.
I cannot even think where to go for help. I am actually thinking of buying a replacement and attempting to replace the original hard drive into it as what ever the problem was it does not appear to have been fixed by the replacement.
frustrated in Iran

Hi Tim! Sorry that you're having so much trouble with your MBP.
I have not had this issue with my MBP but from your discription it sounds like what happened to my G4 - namely the RAM went bad. I installed 3rd party RAM and it worked OK for a few weeks, then the G4 started to balk at starting, not always but most of the time, then finally I could not get pass the grey screen, it just stopped there.
I contacted a friend of mine and he immediately asked if I had an extra RAM in it and told me to remove it then reboot. That proved to be the solution. I didn't think of it because I thought the RAM would be bad from the get-go not go bad over the course of a month or so. Let me know if this might be your case.

Satellite P200-1FC: CD/DVD drive will not start - error Code 10

My Satellite P200-1FC was purchased in January 2008 and preloaded with Vista Home Premium. The DVD/CD Drive is listed in device manager as "TSST corp CDDVDW TS-L632H ATA Device".
At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
Clicking check for solutions produces "could not load driver software" but no solution.
Searching similar questions in user forums suggests a use of a Microsoft Help & Support page headed "The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista".
However this involves modifying the registry! As a relative novice I am reluctant to do this unless I can find no easier way.
Must I bite the bullet and and enter this minefield, or is there a better way?

>At first the drive worked perfectly, but has recently refused to start. Device manager now shows it with a yellow exclamation mark and it's status is given as "This device cannot start. (Code 10)".
This error is definitely caused by a wrong registry entry.
I had such error several times ago and I have solved it removing the lower and upper filters from these registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Here are some steps how it worked on my Windows system;
- I removed the CD/DVD drive from the device manager
- Then edited the registry as described above
- Rebooted the notebook
Im sure it will help you too.
Bye

Adobe Programs Will not Update - Error Code

Hello, I received my Adobe Suite in December of 2012 and since then everytime I've gone to update my programs I receive this error message:
Errors encountered during installation. (U44M1P7)
This message appears for cs6 - Fireworks, Dreamweaver, Photoshop, Illustator, Flash, and InDesign

Hi RTGeary21,
Please refer the kb: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html .
Regards,
Romit Sinha

Indesign will not install, error code DW051

Hello,
This is my error log :
ERROR: DW051: Dependency of session payload {number code...} Creative Suite Adobe CSXS Infrastructure 4 4 has changed.
ERROR: DW051: Dependency of session payload {number code...} DVA DynamiclinkSupport 7 has changed.
ERROR: DW051: Dependency of session payload {number code...} Adobe Web Suite CC Adobe Media Encoder CC X64 7.0.0 has changed.
any ideas ?
Thanks.

uninstall, clean and reinstall per http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Firefox will not install error code 0xc0000142

When I try to run Firefox Setup Stub 34.0.5.exe, I get a message that says "The application was unable to start correctly (0xc0000142). Click OK to close the application.

Hi skippy116 , try to boot the computer in [http://windows.microsoft.com/en-us/windows/start-computer-safe-mode#start-computer-safe-mode=windows-7 Windows Safe mode with network support] (press F8 on the boot screen) and then see if that helps to download and install firefox from the next link (full installer) :
https://www.mozilla.org/en-US/firefox/all/
thank you

Bonjour Service Will Not Start - Error Code 87

I'm unable to start the Bonjour service as I get an error code 87 when starting it. I've followed the apple support recommendation of uninstalling all itunes components and reinstalling but I still get the same issue
Can anybody help with this please?

Thanks.
I turned up this thread while researching:
http://discussions.apple.com/thread.jspa?threadID=2406705
So I'd try the two positive suggestions from there.
First try disabling the BonJour Service prior to attempting the iTunes install (I've seen that trick work sometimes with more-standard sorts of BonJour 1920/1921s).
If still no joy, perhaps check for any signs of Winsock corruption as described in the following Microsoft document:
[How to determine and to recover from Winsock2 corruption in Windows Server 2003, in Windows XP, and in Windows Vista|http://support.microsoft.com/kb/811259]
Any luck with either of those two measures?

S5-1020 Slimline has intermittent resets, then will not reboot. Error code BIOHD1.

Similar Messages

Maybe you are looking for