S5200UK more than meets Min Requirements for Win7 but slow and CPU peeking at 100% during IE or NIS

Hi everyone! Previously my S5200UK was upgraded from 1GB RAM to 2GB with a newer BIOS of V3.21
(See http://h30434.www3.hp.com/t5/Desktop-Hardware/Can-I-increase-RAM-size-if-I-upgrade-the-BIOS/m-p/1302... )
Thanks to Paul Tikkanen's help then I got the machine working fabulously but thanks to Microsoft's decommisioning of XP I decided to upgade to Windows 7 professional. The minimum requirements are 1GHz CPU and 1GB RAM. My AMD CPU is 2.08GHz but its performance is 2.6GHz equivalent. The RAM is 2GB and I have upgraded the HDD to a new Seagate SSHD SATA 1TB hybrid (with 8GB SSD incorporated). I used the exact drive on another machine a dx2000mt and WOW what a difference to boot speed (30sec) 1min with programs installed and data restored. (and that is usable desktop). I also fitted the ATI Radeon 9600 LE 128 MB AGP graphics card as recommended by Paul and a new 500W supply. I did not expect any problems as the 7 upgrade (clean install) on the dx2000mt went like a dream. Anyhow, this is the problem. After installing windows, all the updates and Norton Internet Security (NIS) the machine uses 100% processor and 25% RAM as I attempt to open NIS or use Internet Explorer. I can hear the CPU fan speed up every time it executes any small task and CPU shoots to 100%. With opening NIS there are two nis.exe processes using 50% CPU each! Any small demand of a program results in ultra slow operation. I put Win 7 on my old laptop with 1.5GHz CPU and 2GB RAM and that is great! I cannot believe that this S5200UK machine is limited by the CPU or RAM as it more that meets the requirements. I have obviously installed drivers (most came with Windows 7 and the others from a driver update program). There are no warnings or conflicts in the Device Manager and I have tried reinstalling everything again twice but it is always the same. I even tried changing the HDD to an IDE 80GB 7200rpm one but it was even slower! I also tried removing the graphics card but no change.Oddly I ran a performance test progam and, other than the memory, it came out better that the dx2000mt!!!! Has anyone got any suggestions as to what is causing this?
PS: The o/s is OEM for refurbished pcs on genuine hologram disk (no service pack but this was done via Windows Update) I will be very grateful if anyone out there can save my bacon. Thanks.

Hi:
The only recommendation I can offer based on what you have posted, would be to ditch the Norton Internet Security software and just run it with Microsoft Security Essentials.
That free antivirus/antimalware software uses very few system resources.
http://www.microsoft.com/en-us/download/details.aspx?id=5201
You would also need to use the Norton uninstall tool to make sure it cleans out all traces of the program.
https://support.norton.com/sp/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us

Similar Messages

Why is 7.2 the min required for Music Purchases Now - and in 10.2.8?

All versions of iTunes above 6.0.5 are for later operating systems (10.3+) I have 10.2.8 and have not upgraded to any of the 7.0 versions because of the OS and video/TV features which I cannot use. Today, I tried to purchase music and it said minimum of 7.2 was required, but there is NO 7.2 version in the main downloads list at all, and certainly nothing compatible with 10.2.8 (except the older 6.0.5). Of course, this means that 7.5 is out of the question entirely.
What is going on? Should I make new music purchases using a different service entirely now? Is this a music store bug that Apple is in the process of correcting for its other customers?

Apple always only has the newest version available on their site. You can download older versions, including 7.2, here: http://www.oldapps.com/downloadiTunesmac.php

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Can't install itunes on windows 7 machine. I keep getting A message stating that I don't meet min. requirements, but the machine has more than enough. What do I need to do to correct this?

Are you trying to install the 32-bit version on a 64-bit machine, or vice versa?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with third party software.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

While using Status for Object button it is taking more than 15 mins to open

Hi Gurus,
We are trying to attach documents to ZBOS & OR types sales documents , while opening the Status for Object button of the sales order it is taking more than 15 mins to open , once it is opened it is working as normal.
can you please let us know is it the system functionality because of which it is taking so much time to open or the problem is with something else.
please let us also know whether it is system impacting process.
We are using 4.6C.
Thank You,
Boyeni.

Hi Syed ,
Greetings!!!...
Thank you very much for your Swift response!.
could you be so kind to let me know The Program that needs to be refreshed.
Thank You once again for your Assistance.
Boyeni.

Bought a ipod nano 6th and is not playing for more than 2 min?

bought a ipod nano 6th and is not playing for more than 2 min?

The most likely problem is that the headset is not inserted fully. When you insert the headset, you should feel and hear a "Click" to let you know it is inserted all the way.
The problem is that if it is not inserted all the way, the nano does not detect it. If it is not detected, it will pause playback when the screen goes dark. This is to keep your battery from draining when there is nothing connected to listen to the music.
i

My 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

my 3rd generation ipad even though my battery is at 100 % the screen goes black after sitting for more than 15 mins. The only way to get it to come is by resetting the ipad. Is there a fix for this. It all started after the last two updates.

Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
If no joy... Try a Restore...
1: Connect the device to your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
3: If the device doesn't appear in iTunes, try using the steps in this article to force the device into recovery mode.
From Here
Unresponsive iPad
http://support.apple.com/kb/TS3281

Need an approach regarding reporting for a one-to-many primary-child relationship, where there are more than three child objects for a primary object for reporting purpose

Business Scenario- We have a parent organization with 6 different Business Units.One BU requires 9 stages for for Opportunity(Tender) Tracking.The client requirement is to show the basic details of the tender at the header level and to show details specific to individual sales stage as different tabs.There will be multiple opportunity members added as opportunity team and will be responsible for capturing details specific to individual sales stage(tab). The Tab should be enabled and disabled based on the role. Reporting is required against each stage with specific fields of child objects against each opportunity.
We created multiple children entities under the oportunity(one to many mapping) but we are unable to add more than 3 child objects for a primary object for reporting purpose.
Kindly suggest what needs to be done to meet the requirement

Can you provide the exact steps you took to "created multiple children entities under the oportunity" ?
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

My computer does not meet the requirements for iTunes 7.7

Okay, so I think all these problems that I'm having are because my new computer does not meet the requirements for iTunes 7.7.
The requirements are listed here: http://www.apple.com/itunes/download/
I checked my system and I have:
1. 1.60 GHz instead of 2GHz
2. 511 MB RAM instead of 512 MB RAM
I have no idea how to check MB for video RAM or MHz. Since it's not shown in system I'm assuming that this computer doesn't have any.
The system requirements compared to mine are just off by a bit, but could this still be the problem?
Also, could I use an older version of iTunes that will work with my system & could you please post the link for the download.
Thanks in advance.

Hi,
Firstly, please let us know more details about the issue, such as:
1. What is your network environment, workgroup or domain?
2. How do you implement DirectAccess?
Meanwhile, regarding the requirements, please see
DirectAccess Requirements.
More information:
Networking and Access Technologies-
DirectAccess
Hope this helps.
Jeremy Wu
TechNet Community Support

Hard drive "does not meet the requirements" for system updates

Hi,
I'm running 10.2 and I'm trying to update my computer to the more recent version, except that I've gone through the update downloads on this site and anything higher than 10.3 tell me I need to run 10.3 to run it. When I tried to upgrade to 10.3, I was told that I "cannot install this software on this disk. This volume does not meet the requirements for this update". What does that mean and how do I rectify the problem? Thank you very much in advance.
- Jen

Hi Kappy! I have a similar problem: I had a problem in the past and had to re-install the system. I now have a previous sytem folder on my mac which I do not dare touch. I used to have a later version than 10.3.3 (I cannot remember which). I am now trying to update with the 10.3.9 combo update (just bought a new ipod) and I get the famous "does not meet the requirements" message. I have repaired permissions and done Onyx maintenance - still nothing. I wonder whether somehow the installer detects that there is already some newer component installed and does not want to re-install. I am awfully frustrated... Thanks in advance for your help.

How can I maintain more than one contact person for a supplier

Hi
As per our business requirement , How can I maintain more than one contact person for a single supplier in SRM?
How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier.
we are in SRM 7, and currently we are creating contact person throug customised BDC.
please advice.
Thanks & Regards
NITIN
Edited by: nitinkk on Sep 9, 2011 10:22 AM

Dear Yaniv,
Thanks for your information,
I am able to create users But my problem is How these contact persons are supposed to log in to a portal with different user id and passwords and access the bids for same supplier ? Is there any kind of maping is available for the user/ contact person to the supplier no.??
Thanks & Regard
NITIN

How to have more than one free good for a material ?

Hi everyone,
we have this requirement from the user where he wants give more than one free good for a material.
As far as i know we can configure only one free good for a material in standard SAP.
if have any idea about how to achieve this please guide me how to configure the same in SAP.
thank you in advance

Hi
Check my two links where I have explained this.
Free goods using Sale order BOM methodology
Different business scenarios and Sales BOM techniques for header and item level stock and prices
Thank$

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

I have been using USB 2.1 10/100M ethernet adaptor. But it takes more than 15 mins to detect network interface. What should I do. I am not using apple's company adaptor. It's local company.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

Taking more than 2 min T-SQL

Hi Friends,
SELECT
DATEPART(YEAR, SaleDate) AS [PrevYear],
DATENAME(MONTH, SaleDate) AS [PrevMonth],
SaleDate as SaleDate,
Sum(Amount) as PrevAmount
FROM TableA A
WHERE SaleDate >= DATEADD(yy, DATEDIFF(yy, 0, GETDATE()) - 1, 0)
AND SaleDate <= DATEADD(dd, -1, DATEADD(yy, DATEDIFF(yy, 0, GETDATE()), 0))
-----'2013-12-31 00:00:00.000'
GROUP BY
SaleDate
This Query taking more than 2 min to pull the results .... basically I was passing last year first date and last date (should derive based on getdate())
if I pass static values like this WHERE SaleDate >= ''2013-01-01 00:00:00.000''
AND SaleDate <= '2013-12-31 00:00:00.000'
then it is pulling results in fraction of seconds.....
Note: I was keeping this code in View I have to use only View ( I know we can write store procedure for this but I dont want sp I need only View)
any idea please how to improve my view performance?
Thanks,
RK

Do you have an index on SaleDate column ? If so , is this NCI or CI? How much data does it return? Can you show an execution plan of the query?
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Query taking more than 1/2 hour for 80 million rows in fact table

Hi All,
I am stuck in this query as it it taking more than 35 mins to execute for 80 million rows. My SLA is less than 30 mins for 160 million rows i.e. double the number.
Below is the query and the Execution Plan.
SELECT txn_id AS txn_id,
acntng_entry_src AS txn_src,
f.hrarchy_dmn_id AS hrarchy_dmn_id,
f.prduct_dmn_id AS prduct_dmn_id,
f.pstng_crncy_id AS pstng_crncy_id,
f.acntng_entry_typ AS acntng_entry_typ,
MIN (d.date_value) AS min_val_dt,
GREATEST (MAX (d.date_value),
LEAST ('07-Feb-2009', d.fin_year_end_dt))
AS max_val_dt
FROM Position_Fact f, Date_Dimension d
WHERE f.val_dt_dmn_id = d.date_dmn_id
GROUP BY txn_id,
acntng_entry_src,
f.hrarchy_dmn_id,
f.prduct_dmn_id,
f.pstng_crncy_id,
f.acntng_entry_typ,
d.fin_year_end_dt
Execution Plan is as:
11 HASH JOIN Cost: 914,089 Bytes: 3,698,035,872 Cardinality: 77,042,414
                                                                                9 TABLE ACCESS FULL TABLE Date_Dimension Cost: 29 Bytes: 94,960 Cardinality: 4,748
                                                                                10 TABLE ACCESS FULL TABLE Position_Fact Cost: 913,693 Bytes: 2,157,187,592 Cardinality: 77,042,414
Kindly suggest, how to make it faster.
Regards,
Sid

The above is just a part of the query that is taking the maximum time.
Kindly find the entire query and the plan as follows:
WITH MIN_MX_DT
AS
( SELECT
TXN_ID AS TXN_ID,
ACNTNG_ENTRY_SRC AS TXN_SRC,
F.HRARCHY_DMN_ID AS HRARCHY_DMN_ID,
F.PRDUCT_DMN_ID AS PRDUCT_DMN_ID,
F.PSTNG_CRNCY_ID AS PSTNG_CRNCY_ID,
F.ACNTNG_ENTRY_TYP AS ACNTNG_ENTRY_TYP,
MIN (D.DATE_VALUE) AS MIN_VAL_DT,
GREATEST (MAX (D.DATE_VALUE), LEAST (:B1, D.FIN_YEAR_END_DT))
AS MAX_VAL_DT
FROM
proj_PSTNG_FCT F, proj_DATE_DMN D
WHERE
F.VAL_DT_DMN_ID = D.DATE_DMN_ID
GROUP BY
TXN_ID,
ACNTNG_ENTRY_SRC,
F.HRARCHY_DMN_ID,
F.PRDUCT_DMN_ID,
F.PSTNG_CRNCY_ID,
F.ACNTNG_ENTRY_TYP,
D.FIN_YEAR_END_DT),
SLCT_RCRDS
AS (
SELECT
M.TXN_ID,
M.TXN_SRC,
M.HRARCHY_DMN_ID,
M.PRDUCT_DMN_ID,
M.PSTNG_CRNCY_ID,
M.ACNTNG_ENTRY_TYP,
D.DATE_VALUE AS VAL_DT,
D.DATE_DMN_ID,
D.FIN_WEEK_NUM AS FIN_WEEK_NUM,
D.FIN_YEAR_STRT AS FIN_YEAR_STRT,
D.FIN_YEAR_END AS FIN_YEAR_END
FROM
MIN_MX_DT M, proj_DATE_DMN D
WHERE
D.HOLIDAY_IND = 0
AND D.DATE_VALUE >= MIN_VAL_DT
AND D.DATE_VALUE <= MAX_VAL_DT),
DLY_HDRS
AS (
SELECT
S.TXN_ID AS TXN_ID,
S.TXN_SRC AS TXN_SRC,
S.DATE_DMN_ID AS VAL_DT_DMN_ID,
S.HRARCHY_DMN_ID AS HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID AS PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID AS PSTNG_CRNCY_ID,
SUM
DECODE
PNL_TYP_NM,
:B5, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS MTM_AMT,
NVL (
LAG (
SUM (
DECODE (
PNL_TYP_NM,
:B5, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0)))
OVER (
PARTITION BY S.TXN_ID,
S.TXN_SRC,
S.HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID
ORDER BY S.VAL_DT),
0)
AS YSTDY_MTM,
SUM (
DECODE (
PNL_TYP_NM,
:B4, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS CASH_AMT,
SUM (
DECODE (
PNL_TYP_NM,
:B3, DECODE (NVL (F.PSTNG_TYP, :B2),
:B2, NVL (F.PSTNG_AMNT, 0) * (-1),
NVL (F.PSTNG_AMNT, 0)),
0))
AS PAY_REC_AMT,
S.VAL_DT,
S.FIN_WEEK_NUM,
S.FIN_YEAR_STRT,
S.FIN_YEAR_END,
NVL (TRUNC (F.REVSN_DT), S.VAL_DT) AS REVSN_DT,
S.ACNTNG_ENTRY_TYP AS ACNTNG_ENTRY_TYP
FROM
SLCT_RCRDS S,
proj_PSTNG_FCT F,
proj_ACNT_DMN AD,
proj_PNL_TYP_DMN PTD
WHERE
S.TXN_ID = F.TXN_ID(+)
AND S.TXN_SRC = F.ACNTNG_ENTRY_SRC(+)
AND S.HRARCHY_DMN_ID = F.HRARCHY_DMN_ID(+)
AND S.PRDUCT_DMN_ID = F.PRDUCT_DMN_ID(+)
AND S.PSTNG_CRNCY_ID = F.PSTNG_CRNCY_ID(+)
AND S.DATE_DMN_ID = F.VAL_DT_DMN_ID(+)
AND S.ACNTNG_ENTRY_TYP = F.ACNTNG_ENTRY_TYP(+)
AND SUBSTR (AD.ACNT_NUM, 0, 1) IN (1, 2, 3)
AND NVL (F.ACNT_DMN_ID, 1) = AD.ACNT_DMN_ID
AND NVL (F.PNL_TYP_DMN_ID, 1) = PTD.PNL_TYP_DMN_ID
GROUP BY
S.TXN_ID,
S.TXN_SRC,
S.DATE_DMN_ID,
S.HRARCHY_DMN_ID,
S.PRDUCT_DMN_ID,
S.PSTNG_CRNCY_ID,
S.VAL_DT,
S.FIN_WEEK_NUM,
S.FIN_YEAR_STRT,
S.FIN_YEAR_END,
TRUNC (F.REVSN_DT),
S.ACNTNG_ENTRY_TYP,
F.TXN_ID)
SELECT
D.TXN_ID,
D.VAL_DT_DMN_ID,
D.REVSN_DT,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.YSTDY_MTM,
D.MTM_AMT,
D.CASH_AMT,
D.PAY_REC_AMT,
MTM_AMT + CASH_AMT + PAY_REC_AMT AS DLY_PNL,
SUM (
MTM_AMT + CASH_AMT + PAY_REC_AMT)
OVER (
PARTITION BY D.TXN_ID,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.FIN_WEEK_NUM || D.FIN_YEAR_STRT || D.FIN_YEAR_END
ORDER BY D.VAL_DT)
AS WTD_PNL,
SUM (
MTM_AMT + CASH_AMT + PAY_REC_AMT)
OVER (
PARTITION BY D.TXN_ID,
D.TXN_SRC,
D.HRARCHY_DMN_ID,
D.PRDUCT_DMN_ID,
D.PSTNG_CRNCY_ID,
D.FIN_YEAR_STRT || D.FIN_YEAR_END
ORDER BY D.VAL_DT)
AS YTD_PNL,
D.ACNTNG_ENTRY_TYP AS ACNTNG_PSTNG_TYP,
'EOD ETL' AS CRTD_BY,
SYSTIMESTAMP AS CRTN_DT,
NULL AS MDFD_BY,
NULL AS MDFCTN_DT
FROM
DLY_HDRS D
Plan
SELECT STATEMENT ALL_ROWSCost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
25 WINDOW SORT Cost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
24 WINDOW SORT Cost: 11,950,256 Bytes: 3,369,680,886 Cardinality: 7,854,734
23 VIEW Cost: 10,519,225 Bytes: 3,369,680,886 Cardinality: 7,854,734
22 WINDOW BUFFER Cost: 10,519,225 Bytes: 997,551,218 Cardinality: 7,854,734
21 SORT GROUP BY Cost: 10,519,225 Bytes: 997,551,218 Cardinality: 7,854,734
20 HASH JOIN Cost: 10,296,285 Bytes: 997,551,218 Cardinality: 7,854,734
1 TABLE ACCESS FULL TABLE proj_PNL_TYP_DMN Cost: 3 Bytes: 45 Cardinality: 5
19 HASH JOIN Cost: 10,296,173 Bytes: 2,695,349,628 Cardinality: 22,841,946
5 VIEW VIEW index$_join$_007 Cost: 3 Bytes: 84 Cardinality: 7
4 HASH JOIN
2 INDEX FAST FULL SCAN INDEX (UNIQUE) proj_ACNT_DMN_PK Cost: 1 Bytes: 84 Cardinality: 7
3 INDEX FAST FULL SCAN INDEX (UNIQUE) proj_ACNT_DMN_UNQ Cost: 1 Bytes: 84 Cardinality: 7
18 HASH JOIN RIGHT OUTER Cost: 10,293,077 Bytes: 68,925,225,244 Cardinality: 650,237,974
6 TABLE ACCESS FULL TABLE proj_PSTNG_FCT Cost: 913,986 Bytes: 4,545,502,426 Cardinality: 77,042,414
17 VIEW Cost: 7,300,017 Bytes: 30,561,184,778 Cardinality: 650,237,974
16 MERGE JOIN Cost: 7,300,017 Bytes: 230,184,242,796 Cardinality: 650,237,974
8 SORT JOIN Cost: 30 Bytes: 87,776 Cardinality: 3,376
7 TABLE ACCESS FULL TABLE proj_DATE_DMN Cost: 29 Bytes: 87,776 Cardinality: 3,376
15 FILTER
14 SORT JOIN Cost: 7,238,488 Bytes: 25,269,911,792 Cardinality: 77,042,414
13 VIEW Cost: 1,835,219 Bytes: 25,269,911,792 Cardinality: 77,042,414
12 SORT GROUP BY Cost: 1,835,219 Bytes: 3,698,035,872 Cardinality: 77,042,414
11 HASH JOIN Cost: 914,089 Bytes: 3,698,035,872 Cardinality: 77,042,414
9 TABLE ACCESS FULL TABLE proj_DATE_DMN Cost: 29 Bytes: 94,960 Cardinality: 4,748
10 TABLE ACCESS FULL TABLE proj_PSTNG_FCT Cost: 913,693 Bytes: 2,157,187,592 Cardinality: 77,042,414

Save an empty document in InDesign CC and Illustrator CC takes more than 3 min.

Save an empty document in InDesign CC and Illustrator CC takes more than 3 min.
The same if you open an empty document.
I monitored the application status using Activity Monitor and every time I saved a document the application didn't respond then, after about three minutes, comes back to life.
I'm working on a MacBook Pro, 2.6 Ghz, 8 Gb Ram with OS X 10.9.
Please let me know If someone else had the same issue because I use Adobe softwares not only for my personal job but also to show people how Adobe software works...
Thanks.
Andrea Spinazzola

Adobe Drive is the reason!
Please communicate this to everybody massively because I think is the reason why many Adobe CC users refer about bad performance.
I heard many issues related to this and no one talk about this.
Thanks Hank.

S5200UK more than meets Min Requirements for Win7 but slow and CPU peeking at 100% during IE or NIS

Similar Messages

Maybe you are looking for