S540 and USB 3.0 Harddrive

Hi
My USB 3.0 Hard drive random, disconnect/reconnect when I stream Audio/Video files.
I'm running Windows 8.1
I have tried 2 different drives of different Brand (Toshiba and Trancend) with same result.
If I switch to USB 2.0 (In the BIOS), there is no problems.
I have two S540, and the problem is seen on both machines.
I hope there is a solution on the problem.
Best regards

Billy Bates wrote:
I want to buy a usb 3.0 and esata pci card for my Mac Pro. Do I need to use a sata cable and attach it to the 2nd optical drives sata port?
Not of you don't want to. While you can get an eSATA card which requires that (see installation video here: http://eshop.macsales.com/installvideos/macpro_2009_esata_h/ ), there are also eSATA cards which just run off the PCIe bus, such as this http://eshop.macsales.com/item/NewerTech/MXPCIE6GS2/ which I'm using. Same is true for the USB 3.0 card, such as this http://eshop.macsales.com/item/Sonnet%20Technology/USB3ME/ which I'm also using. I assume the eSATA card which you're asking about allows booting from the drive that's connected to it. Note that neither the eSATA card or the USB 3.0 card that I'm using will allow booting.

Similar Messages

I have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

i have question about hooking up an external hdd to a time capsule and still have my printer hooked up as well. Anyone got any tips for me, how to do it and what brand of harddrive that will work best for me 1 or 2 TB

You just need a powered hub.. if you already use one then fine.
Plug in just about any external hard disk will work fine. Format has to be readable by the TC.. ie fat32.. or much better HFS+.. plug it into a Mac to prepare the drive.
Pick whatever size suits.. nowadays 2TB are most economical.
WD, Seagate have goobled up all the minor players.. so pick one.
Whatever suits your budget and asthetics.
NOTE.. The USB on the TC is fine for printers.. IMHO it is the wrong way to go with USB disks.. use the internal disk of the TC.. USB is less than half the native speed plugged into a Mac.. TC to USB is slow.. far slower than internal drive.. or using external drive as external.

Airport Extreme and USB harddisc indexing?

Hi...
I've just puchased myself an Airport Extreme Base Station, and connected my external USB 2.0 harddrive to it, but there seems to be a problem... Whenever i try to gain access to the drive, it seems that folders with large amounts of data in it fails to show me the data... When i connect the drive directly to my mac, it all shows up, but not when i access the drive through the base station... I've tried to look deeper into the settings of the station, but i can't seem to find any way of changing any settings for the way it handles harddrives..
Anyone else experiencing this?
Thanks in advance

Does this mean, that if you connect an already "used"
disc (with previously used data), you can't expect it
to read it all? Would it be a solution, if i put all
the data over on another disc as backup, and then
remotely transfered it to my external disc connected
to the AEBS?
Until apple provides a way to change the rights on files using the base station, then the steps you outlined above will work.

How to have ethernet connected PC use printer and USB HD connected into TC

So I just got a new Time Capsule (500GB) and the way I have it connected is the cable modem goes through it and then another ethernet cable connects to my desktop PC (no wireless on this PC). Then I have my USB printer and USB HD going into the USB port on the Time Capsule via a USB Hub. Airport utility sees both the HD and the Printer.
My problem is that I can't get my PC to see the HD or the Printer. How does a PC connected through a ethernet cable and not wireless see and use these two peripherals? I have Bonjour for Windows installed but I thought that was for a wireless connection? Also is there a way to open some kind of configuration thing for Bonjour on my PC? Where on my PC would I find the HD and Printer (like in Windows Explorer or Network Places), I can't find these devices anywhere except when looking in the Airport Utility Manual Setup.
Any help would be much appreciated. I don't have much technical knowledge about networks.
Edit: One last thing is that before getting the TimeCapsule, I had a regular D-Link router running my wireless network and the printer was connected directly to the PC. This setup allowed my Macbook to use the printer and access any shared folders/files on my PC. My Mackbook was recently stolen and my new one will arrive next week, so right now I can't really test whether the Macbook can see and use the HD and Printer if they are connected to the Time Capsule. I'm wondering if I should just go back to plugging the HD and printer into the PC and running the network sharing that way????
Message was edited by: arbitrage

Just wanted to bump this question to see if anyone has any answers. My main issue is seeing the time capsule from my Windows desktop and the connected harddrive. However, my new problem is that whenever I connect the USB Windows Formated HD to the Time Capsule the whole thing just stops working and my PC and my MacBook can't read the Time Capsule at all until I turn of the USB HD. Any help would be appreciated.

TS3048 Bluetooth and USB ports aren't working can't connect mouse or keyboard.

Bluetooth and USB ports aren't working, so am unable to use Imac past turning it on. There's no way to connect mouse or keyboard, it started right after a software update for Maverick (OS X bash Update 1.0 – OS X Mavericks), bluetooth symbol not showing in the task bar at all.

Hi SBrwn,
Thanks for visiting Apple Support Communities.
The symptom you're describing can be frustrating to troubleshoot as our options are limited. I do suggest resetting the System Management Controller (SMC) if you have not already. This step can help you regain use of USB and Bluetooth.
Follow these steps to reset the SMC on your iMac:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer. [by holding down the power button]
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
You can find these steps and more information at this link:
Intel-based Macs: Resetting the System Management Controller (SMC)
All the best,
Jeremy

HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

Update: It seems as though the phone will charge if I plug it in and then turn it off. It will not charge while the phone is on. Also iTunes will not recognize it, so I can't sync or anything. I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

HT201413 i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it

That screen is asking you to connect the device to iTunes to restore it.
tt2

Airport Extreme - problem with usb printer and usb disk

I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
1)
My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
- printer seems working fine after installing bonjour printer installing wizard.
- I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
- In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
- printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
2)
USB disk is Targa Databox II 250
- Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
- I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

A question about grub and USB

Hi All
I have a quick question about grub and USB that I can't quite find the answer to by searching. Most of the FAQs discuss booting a full linux dristribution from USB. My situation is this. I am getting a new computer with two drives, the second will be arch and the first will be Vista (for my wife). I want the computer to boot the same way that my wife's machine boots at work so I don't want to install grub on the MBR. So, is there a way to have all of the grub config files and kernels installed on the second drive and simply install to grub boot loader to the MBR of a USB stick? My goal would be to simply plug the USB stick into the new PC and boot arch from the second drive.
Thanks
Kev

i cant say for hp's
havent worked on any in a while
recent machines have been coupleof dell's , vaio & emachine
which dells do offer it at least the ones i tried , my laptop does(dell)
all home pc's are built by me which do offer to boot individual drives
what hp you getting it may tell in specs
are both discs sata? if so it might not offer this option with 2 drives of same interface
check your power supply alot of these preconfigured machines put cheap under reated power supplies in there
& will burn your motherboard i just replaced PS(250 watt) & mobo(845gvsr) in an emachines <cheap stuff<
i hope you researched the pc before buying ie : mobo, power supply are the biggest concerns
i find it much more benificial to build my own machine gives me peace at mind. the cost is sometimes more in $ but not always , your biggest expense is time researching hardware
if you live in usa the best places to start looking are bensbargains.net & pricewatch.com
i am not affiliated with either & niether sell the hardware they are just advertisers a place to buy
for costomized machines that i would trust is unitedmicro.com theyll asemble & test before shipping
i have gotten 2 machines so far from them with NO PROBLEMS with hardware (knock knock)
you may want to consider this in your next venture for pc

Windows 8.1 64 bit and USB 3.0 connection Error

What a Nightmare to me after I have purchased my Probook 470 G2 with window 8.1 64bit and USB 3.0. after my setup for my new laptop, there are 2 issues i am facing now:
1. my USB 3.0 external drive can work properly with my old window 7 laptop with USB 3.0 input. However, my USB 3.0 exernal drive can not function proplery when i try to plug in to my new laptop with window 8.1 64bit. it show me that it sometimes disconnect, sometimes connect frequently and I can not remove the drive safely
2. Once the laptop set up, there is 3 partition from HP, which is windows (c, recovery (D and HP tools (E. as i want to allocate more space fo save my old photo, HP technician has taught me to compress and release some space(around 150GB) from my C: . I can use the new drive successfully. However it seems i can not have window update manually so I am concerned if this is the mian point to create this issue.
Any HP technicians can help here?
This question was solved.
View Solution.

No. There is no need to go to a command line and there aren't any DOS commands that will help.
You should consider using Windows system restore to return your notebook's operating system to a date before this issue began. Choose a restore point dated before the problem surfaced.Use the search charm and type in restore. Choose create a restore point. The System Properties window will appear. Click on System Restore as seen in the following image.
Make certain the show me more restore points option has a checkmark in the box. Choose the restore point that you want and then click on next. This is safe and reversible.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items to those devices but it won't work. I also have tried copying and pasting those files onto those devices but that doesn't work too. Can any one help?

I'm not able to copy and paste files from my mac to hard disk and usb. I have tried dragging the items I want to copy to those devices but it won't work. I also have tried copying and pasting those files onto those devices too but that doesn't work too. Can any one help?

Hi BobRz
Thanks for you suggestion but it didn't work - are there other ways for solving this problem? Or is it because my files that I want to copy and paste onto my hard disk etc are too big? (However there is space on my hard disk and it works on a PC)

Bitlocker without TPM and USB

Hello Team,
I am working for a company which has Windows Server 2012 R2 domain server and mixture of Windows 7 and Windows 8 client computers.
The problem is, I need to configure bit-locker in all client machine, but some machine doesn't have TPM. I found a way to configure bit-locker without TPM, but it requires USB(key within it) at every startup.
So I want to configure Bit-locker in all client machine without TPM and USB, but with PIN. And all bit-locker recovery keys should be backed up to Active directory.
Please let me know the steps to configure this rather than HTTP links.
Thanks in Advance.
Have a great day ahead and make a great day for me.

Hi.
Having a PIN is only possible in combination with a TPM, but having a password alone is possible since windows 8.

Macs and USB Devices Not Getting Along

I am posting this incase I'm not the only one.
I have noticed this issue with my Intel iMac as well as my PPC iMac
Both are running the latest versions of OSX 10.4.9
This is regarding USB connectivity and the effect connected devices have on the system.
USB Setup
1 7 Port usb hub
1 Palm Dock Connected via hub
1 iPod Dock Connected to 2nd USB Port on iMac
1 ScanSnap connected via hub - POWER OFF
Bluetooth Apple Mouse & Keyboard
1 TomTom 910 connected via hub - Connected to dock but power is off.
1 Canon IP90 Connects via Bluetooth - POWER OFF
This is what happens.
If one of the following usb devices is connected, boot times can be extended with the system "pausing" at the Gray screen before Gray Apple Logo appears.
iPod
Palm TX
Once the OS boots Missing Sync's Menu Bar status application will not load, will have to manual load app.
If I disconnect these devices and reboot boot time is normal with no "pause" and missing sync loads normally.
Also i Have noticed my Apple keyboard will take longer to pair during boot with or without these devices connected.
iMac will not power down as scheduled with these usb devices connected if the system falls asleep with them connected.
Normally the iMac will wake itself up at 11pm to shut down. If my iPod or Palm is connected it will not. It will only shut down via schedule if it is awake when scheduled time is reached.
iMac G5 2 Ghz 1.5 Ram 400 Gig HD & iBook G4 1.33 12 Mac OS X (10.4.6)

So just an updated to my original post. I have been working with tech support for Missing Sync. There is a known issue with a menu bar application that comes with their software. It seems when more than 1 or 2 usb devices are connected this menu bar app doesn't load correctly... or at all.
According to them.. one of their techs actually spoke with a Apple Engineer at WWDC this week regarding the issue. According to this Apple Engineer there is a known issue with OS X and USB handling. Apparently the OS can "freak out" if certain devices are connected during boot.
No other specifics where given, and who knows if this is Missing Syncs attempt at shelling off responsibility to Apple. However, I am inclined to believe it as I have noticed that my iMac Intel or PowerPC will take a significantly longer time booting if my iPod or Palm Pilot is docked during boot. I've also noticed I can't reset my PRAM when these devices are connected.
I hope apply addresses these issues, seems kinda crazy its gotten this far being that USB devices are the primary method for expanding your Mac's abilities.
iMac G5 2 Ghz 1.5 Ram 400 Gig HD & iBook G4 1.33 12 Mac OS X (10.4.6)

My iphone external hard drive keeps disconnecting so it tells me I disconnected improperly. I have changed electric cord directly to outlet and usb also direct, and it still happens.

I store ALL my photos (400 events) on an external 1T hard drive. The hard drive keeps disconnecting so it get a msg telling me I disconnected improperly basically which is a serious no no. I then have to re-start. I have tried connecting directly to the wall outlet, to a super duper surge protector and also have connected the usb (was on a usb port) directly to the computer. But it continues to happen a total nusance. What do I do?

I would first contact Seagate's tech support for a possible solution. If that doesn't prove successful then I would try a different product or consider building your own.
Basic Backup
Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
Carbon Copy Cloner
Data Backup
Deja Vu
Silver Keeper
Retrospect
Super Flexible File Synchronizer
SuperDuper!
Synchronize Pro! X
Synk Pro
Synk Standard
Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files.
Although you can buy a complete external drive system, you can also put one together if you are so inclined. It's relatively easy and only requires a Phillips head screwdriver (typically.) You can purchase hard drives separately. This gives you an opportunity to shop for the best prices on a hard drive of your choice. Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu. You can find reviews and benchmarks on many drives at Storage Review.
Enclosures for FireWire and USB are readily available. You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports. I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.) You can find enclosures at places such as;
Cool Drives
OWC
WiebeTech
Firewire Direct
California Drives
NewEgg
All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover. Usually the only tool required is a small or medium Phillips screwdriver.

Complete novice! how do i install ms office on macbook pro - have disks and USB superdrive

Hi, I'm a complete novice. How do i install MS Office on MacBook Pro - have disks and USB Superdrive?

Attach the drive via USB. Insert the disk into the drive. It'll show up on the desktop. Double click the disk icon and then run the installer.
Matt

S540 and USB 3.0 Harddrive

Similar Messages

Maybe you are looking for