S6000 turned on by itself, after i have turned it off!!
Hi all, I have a pain of a problem with my s6000 tablet. A couple of times i'd leave it overnight, with it having almost max charge. When i'd try and turn it on it either wouldn't or there would only be a few % off battery left. Now it seems that when i do turn it off, almost every time it will power down fine then automatically turn itself back on?! Any ideas people/Lenovo? Its quite annoying as i don't like to leave things always on charge as its not always practical for me, and is spoiling my fun of an otherwise excellent and cheap bit of kit!
Thanks in advance for any help or advice offered
Toby
Hi Corlene,
Welcome to Lenovo Community Forums!
I’m sorry to hear that your S6000 Tablet is not working as expected and turning ON automatically, I suggest you reset the Tablet to Factory settings and check if the issue persists. Please click on Settings> Backup & Reset option.
NOTE: This option allows you to reset your IdeaTab to the factory default settings. Please backup if there is any data files in Tablet.
Do post us back if the issue still persists.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!
Similar Messages
-
Once photostream pictures are downloaded onto my mac will they stay in iPhoto forever after i have deleted them off of my phone?
When I synced my iPhone I my Mac , it automatically created a file called photo stream and imported all photos from phone into that file on my Mac.
Do you mean the "Photo Stream" album in the "Web" section of iPhoto? Like shown here?
If that is the only place where you are seeing your photos, in "my Photo Stream" in the "Web" section of Photo, then you need to copy these photos to an event to import them into the library.
The Photo Stream album is only showing you what currently can be imported from iCloud, and the photos will vanish after a month, so you are having a limited time to grab them.
If you have enabled "Automatic Import" in iPhoto's Photo Stream Preferences, it should already have created an event "July Photo Stream" and other monthly events with the photos from the streams. What find in these monthly events has been savely imported.
Regards
Léonie -
Hi,
My 1stgen iPad keeps. Switching back to the apps. Pages by itself after installing ios5. I have shut it down manually as suggestedby a tech rep but the problem still exists.
Thanks, Jim1) This is because of software version 1.1. See this
thread for some options as to how to go back to 1.0,
which will correct the problem...
http://discussions.apple.com/thread.jspa?threadID=3754
59&tstart=0
2) This tends to happen after videos. Give the iPod a
minute or two to readjust. It should now be more
accurate.
3) This?
iPod shows a folder icon with exclamation
point
4) Restore the iPod
5) Try these...
iPod Only Shows An Apple Logo and Will Not Start
Up
iPod Only Shows An Apple Logo
I think 3,4, and 5 are related. Try the options I
posted for each one.
btabz
I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again -
Sometimes after putting my iMac to sleep, I cannot get it to wake up again. It's as if it's shut down and I have to turn it off at the mains and restart it. Any ideas why? Does this keep happening to anybody else?
That message means that you have to restore the iPad now. Something went wrong. You need to restore the iOS software and then restore from the backup.
Read this carefully and follow the instructions. Make sure that you restore from your backup at the end of the process. That is covered at the bottom of the support article.
http://support.apple.com/kb/HT1414 -
I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?
try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard) -
My iPhone is locked due to setting up a passcode after loading new version 7. I have tried to reset but keep getting turn of "find my iphone". I can't get into the phone to turn this off. What do I do now?
Try this - http://support.apple.com/kb/ht1212 - also you can sign into www.icloud.com and remote erase the phone
recovery mode restore as descibed in HT1808 might be your last resort though -
Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly. -
What to do now when my iPad won't turn on after I turn it off. It shows only the apple logo. I am sure it has above 70% charge as when I sync my iPad it shows necessary detail in iTunes. I have tried, HOME & POWER button, but did not work.
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If Unable to Restore, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...
After you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Iphone 4s touchscreen stops responding after a minute or so, I then have to wait at least a minute before the touchscreen works again but soon after it stops responding. I have tried hard reset, turning it off over night, etc
Hello,
I had that problem as well and the apple support suggested to turn off the LTE-mode to have a running system and try to exchange the micro-sim by my provider.
THAT was not an option!
BUT it seems to solve my problem in the following way after trying a lot of possibilties:
In the menue properties/help (don't know the exact english word, because I run my phone in german)
I switched on the nice feature 'flash LED' by incomming calls, msgs, and push infos.
Today the flash feature was responding to different push notes very slowly.
By switching this feature off the LTE-mode-tochscreen-not-responding-problem disappeared.
We tried this on a other iphone, not having the metioned problem, and switched the LED-flash:
the problem appeared. Switching the LED-flash off: problem disappeared!
It seems to be a bug that the LED will hint Calls and MSGs in combination with the LTE mode!
treated my phone very hard today to double check, but its still ok.
@Apple:
Please fix that issue in the next update.
Hope, this helps you guys as well. -
Hello there, am new here and very stressed, i have an Imac core i3 which is logging off itself after a few seconds of login, it goes back to the login menu where i put the password. I have tried to repair the os but my pioneer rom is not reading the disk. I press the :c" button on startup but its not picking up the disk in the rom, i have tried to put the disk in an external rom but same answer, am starting to think that my os disk is bad. Please help me.
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
My backlight will not turn off automatically. I have to manually turn it off and forget to sometimes and that drains my battery. Does anyone know how to make it turn of automatically after a few seconds?
Use the Settings app.
Settings > General > Auto Lock
Is Auto Lock set to Never? Change it to less time. -
My iphone 3gs turns off frequency by itself after i updated to 4.3.1
My problem is after I updated my iphone 3gs to 4.3 version it turns off automatically within 2.3 minutes even with full battery and I have to press home and power key to turn it on. But weird thing is that if I use my iphone to play games or listen to music or charge then the iphone won’t turn it off. I tried reset, recover and it won’t work .I also tried to downgrade but I don’t have a backup. Can anyone help?
I don't know what you mean by "recover" and you can't downgrade the iOS. You need to do the basic troubleshooting steps described in the User Guide:
Reset phone
Restore phone in iTunes using a backup
Restore phone in iTunes as new, without using a backup
If restoring as new doesn't help, you had a hardware failure during the update. -
AirPlay, iPod3, iOS 6.0.1: AirPlay keeps turning itself on. Seems to be since iOS update. I thought my internal speaker was broken! Nope. Just have to keep turning AirPlay off. I'm posting this both for others who might have this problem, and to ask how to keep airplay off.
The "fix" is to get the phone repaired. There's no magic solution for a broken phone.
Bring your phone ant $149 to Apple for an out of warranty replacement, or find a 3rd party repair shop near you. -
I have IPhone 6 and when I using Viber Siri is actives itself ones I turn it off is actives my player itself as well. What can I do to stop that happen.
Try turning off Siri in your Settings. Follow the steps on this page: http://www.imore.com/need-disable-notification-center-control-siri-access-lock-s creen-heres-how-ios-8
If this doesn't help, try resetting your iPhone. This won't delete your data stored on the phone.
Press and hold the Sleep/Wake button
Press and hold on the Home button
Keep holding both buttons until the display turns off and back on with Apple logo on it.
Alternatively, you may go to Settings - General - Reset - Reset All Settings -
After the new update, why does my Bluetooth keep turning itself on? I keep turning it off, but it still finds a way to turn itself back on
hi Apfelwurm,
why do you say it's not normal.
it always switches itself on after i update. it just did again, this time for 7.1.2.. i t also will switch on after a restore.
i never use bluetooth and make sure it's not on for any other reason.
it's been noticed by others too.
http://www.forbes.com/sites/kashmirhill/2014/03/12/apple-keeps-turning-bluetooth -on-when-you-update-your-iphone/
Maybe you are looking for
-
Want to change my MacBook Pro login wallpaper.
How can I change the log in wallpaper?
-
How can I embed glassfish openesb in a lightweight mode?
Is there a way embed a lightweight mode of glassfish esb? I want to use it as far ligntweight as possible,maybe just the jbi runtime,the core BCs,SEs.When try to install glassfish esb,I find netbeans,glassfish must exist.
-
Anyone nows what i have to download to see videos in youtube?
hi it is my first time with a mcbookpro im trying to see videos in youtube what it is not posible,someone knows what i have to download or what do i can do?
-
Problems with the par file of Browse Deployment
Hi, I had an error message with the com.sap.portal.support.browse.default in Browse deployment, that this iView is not found. Fortunately I had a file with the same name, so I uploaded it, but it was the wrong one (Why do they all have the same file
-
Fonts not installing in Leopard 10.5
I've just installed Leopard, no problems except that I can't get my 3rd-party fonts into Font Book. In fact Font Book has been playing up a lot. The first time I restarted after the install I noticed that one of the system fonts (possibly Helvetica)