S650 tool dl image fail

hello every body
about 2 weeks ago i updated my s650 phone to 4.4.2 but because of battery drain problem , decided to flash my phone using flash tool to 4.2.2(official version S650_ROW_S116_140423)
any way
i downloaded it and all tools , started flash_tool.exe and setup every thing.same as toutarial below !
ROM Installation:
- Unpack the ROM
- Unpack FlashTools, and Click on Flash_tool.exe
- Select a the MT6582_Android_scatter.txt from the unpacked ROM
- Wait file to be added into Flash Tool
- Choose Option –> USB Model, click USB Model
–> Choose Option –> DA DownLoad All –>Speed –> High Speed, click High Speed
- Turn off your phone, remove the battery. (YES remove the battery)
- "Press F9 (hit Download button) " OR " if upgrade ROM Firmware->Upgrade "
- Now connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear –> purple–> yellow.
- When done, Green circle pops up!!
well i removed my battery , pressed F9 and connected my phone to pc after download process completed.
as i did that , progress bar's color change to red but my pc freezed after while !
and here is the problem.
when i connect my phone to pc , i can see it in device manager that is connected but after 2 or 3 second it will be disapeared from device manager list. even when i use USBDeview it says it is not connect (but it is).
i installed drivers too.
so i guess in flash process my s650 disconnected and now when i want to power it on it says:
tool dl image fail !
what can i do?
tank you

Hi ALIKING
Can you enter the recovery mode(Vol+/- and Power)?
My guess is that you messed up the SP Drivers(that's why the flash tool doesn't work).I suppose you're running Windows 7.
I suggest uninstalling/reinstalling them(SP drivers)>follow the first part of message7 >
https://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747/highlight/true#M3660 (''MT65xx Preloader'' will pop just for a short time so you'll have to be quick !)
If all works out try using the V3 Flash Tool.
Let me know how it goes.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Stuck in boot loop tool dl image fail

Hi,
I was on my tablet and the battery was kind of low and it suddently powered off and started up again saying "tool DL image fail" and it keeps on swirching for black screen to this message. Does anyone know how to fix this,
Thanks.

Hi ALIKING
Can you enter the recovery mode(Vol+/- and Power)?
My guess is that you messed up the SP Drivers(that's why the flash tool doesn't work).I suppose you're running Windows 7.
I suggest uninstalling/reinstalling them(SP drivers)>follow the first part of message7 >
https://forums.lenovo.com/t5/Lenovo-Phones/Lenove-S650-sound-issue/m-p/1413747/highlight/true#M3660 (''MT65xx Preloader'' will pop just for a short time so you'll have to be quick !)
If all works out try using the V3 Flash Tool.
Let me know how it goes.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

System Image Fails on Windows 8.1 Pro

Creating an image fails giving the error message shown in the attachment. I found that the Virtual Disk and Volume Shadow Copy services were set to manual so I started them and changed startup to automatic. The failure remains as shown. Then, I rebooted and again got the same error message. It fails when using an external hard drive or DVDs
Has anyone experienced something similar when attempting to create an image and managed to overcome it?
Attachments:
Image failure.PNG ‏13 KB

I attempted to install the suggested update, but it would not install as I have recently installed 8.1. I am beginning to suspect that the problem lies in the 8.1 package in that it needs a specific update similar to the one for 8. I examined source and destination drives in disk manager and found that the free space is not the issue. All free space greatly exceeds the minimum levels. I also checked usn journal size and that is not an issue either. It might be wise to wait for a bit to see if upcoming updates will fix the problem. My last successful update was last week when I still had Windows 8. I have backup imaging set every Wednesday.
Attachments:
Disk Partitions.PNG ‏26 KB

File Place does not appear on my menu. Neither does Tools Photoshop Image processor.

In Bridge File>Place is grayed out on my menu. Tools>Photoshop>Image processor does not appear at all. I have reset the preferences numerous times and am good to go until I shut down my computer. When I reboot they are gone again. I have a Mac with OS 10.10.2 (Yosemite) and CC.

Mardi Carter wrote:
I shut down using "Shut Down" under the Apple menu.....always…
Well, that's fine for the OS, but sometimes not so great for Photoshop. Try QUITTING Photoshop from the Photoshop menu, or by Command Q, before you get anywhere near your Apple menu .
Gene gave you sound advice, but don't forget to run Repair Permissions with Apple's Disk Utility before and after any installation, upgrade or update of the OS or any application.
You'd think that shouldn't be necessary, but it is indeed vital, indispensable routine maintenance.
Forget about "it had never happened before", Yosemite is a work in progress. Apple never gets a major OS X release right until about the dot four or five release, so Yosemite has a way to go before it's at 10.10.4 or 10.10.5. That has proven to be the nature of the beast.

Tools Photoshop Image Processor NG (CS5)

From within Bridge CS5, the Image Processor does not bring up the options window.
From within Bridge, if I select some images and then do: Tools > Photoshop > Image Processor...
The next screen does not come up. Nothing happens.... the main menu goes gray, but nothing else happens. No other window pops up.
In CS2 (I know, I'm a late adopter) the what-to-do with the selected images window pops up.
Thanks,
Drew

I am on CS3 and will move to CS5 soon, once the initial frenzy dies. But you say you do this: Tools > Photoshop > Image Processor...
The next screen does not come up. Nothing happens.... the main menu goes gray, but nothing else happens. No other window pops up.
When you click on Image Processor Photoshop should load and then you get the Image Processor Menu. Does it do this and then the Image Processor menu items are gray, so don't you get that far?
Can you load the Image Processor from Photoshop? (file/scripts/image processsor).

Updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

updated to new 2014 cc. In bridge when I go to tools/Photoshop/Image Processor....I get this message "adobe photoshop 2014 CC has quit working" Anyone have a fix for this??

I use a windows 7 pro and have no problem like that from bridge cc when I select a thumbnail then use menu Tools>Photoshop>Image Processor.. I see Adobe Photoshop CC 2014 start up then I see the Image processor dialog and that one file is selected in the bridge I the complete the dialog and click run. The image files are created. Photoshop remains open after the image files are create with no open documents. I need to click on the bridge in the task bar to bring bridge back into focus.
What does you system configuration?

I am trying to batch convert cr2 to jpg. in bridge i go tools ps image processor and it returns a message "Image Processor.jsx could not be found." I updated cc to no avail. i am on mac 10.7.5

I am trying to batch convert cr2 to jpg. in bridge i go tools>ps>image processor and it returns a message "Image Processor.jsx could not be found." I updated cc to no avail. i am on mac 10.7.5

I go to file scripts but there is no option there for Image Processor

Image Capture Boot Image Fails with 0xc000000f

I am trying to capture a Windows 8.1 Enterprise (with Update) x64 installation using WDS, but the Capture Image fails to load. I used the boot.wim from the Windows Server 2012 R2 (with Update) ISO to create a boot image in WDS and then a capture image from
it. After I press F12 and the progress bar finishes the following message appears:
This only happens when I boot the capture image - the original boot image that I imported in WDS boots normally. I also tried with the Windows 8.1 (with Update) boot.wim, but the issue reoccurs. This is a Hyper-V VM on Windows Server
2012. Is this a problem with the recent update?

Hi,
We’re currently experiencing exactly the same issue. Also a fully-updated Server 2012R2 (with the recent KB2919355 update) machine.
So far, I found two other posts with exactly the same issue:
1) http://wp.secretnest.info/?p=1474
2)
http://community.spiceworks.com/topic/472581-wds-capture-image-winload-exe-corrupt-or-missing
According to these posts it seems like the issue occurs after the first time a capture image based upon a Windows 8.1 or Server2012R2 boot.wim is created.
What I’ve tried so far is removing the server role, deleting the WDS store, rebooting the server and start over with a Windows 7 boot.wim. The normal boot.wim starts ok, but the created capture image doesn’t.
So the process of creating the capture boot image did ‘something’ in a way the new boot.wim differences from the old boot.wim. To find out what, I first mounted the new .wim file to see if winload.exe is actually there – it is both in
system32 as well as systen32\boot. So my second guess was that the Windows Boot Manager cannot find the windows loader, because of an incorrect declaration of disks in the BCD store.
I used BCDEDIT to show the differences between the working and non-working boot images:
Windows Boot Loader
identifier {1d214c07-6892-401c-a762-04647ad38560}
device ramdisk=[boot]\Boot\x64\Images\boot.wim,{b321afc0-8a23-4
961-85dd-a10f3c46473f}
description Windows 7 Boot Image
osdevice ramdisk=[boot]\Boot\x64\Images\boot.wim,{68d9e51c-a129-4
ee1-9725-2ab00a957daf}
systemroot \WINDOWS
detecthal Yes
winpe Yes
Device options
identifier {b321afc0-8a23-4961-85dd-a10f3c46473f}
inherit {68d9e51c-a129-4ee1-9725-2ab00a957daf}
ramdiskmcenabled No
ramdiskmctftpfallback Yes
-- Second - Non Working disk --
Windows Boot Loader
identifier {872352a0-0ad9-46f6-8612-1aed71ea8534}
device ramdisk=[boot]\Boot\x64\Images\boot-win7-capture.wim,{7a
b86a3a-3651-4f50-a748-34f3e784158c}
description Windows 7 Capture
osdevice ramdisk=[boot]\Boot\x64\Images\boot-win7-capture.wim,{68
d9e51c-a129-4ee1-9725-2ab00a957daf}
systemroot \WINDOWS
detecthal Yes
winpe Yes
Device options
identifier {7ab86a3a-3651-4f50-a748-34f3e784158c}
inherit {68d9e51c-a129-4ee1-9725-2ab00a957daf}
ramdiskmcenabled No
ramdiskmctftpfallback Yes
So the ID for the osdevice is the same, and only the device is different, but mentioned correctly under Device options (as far as my knowledge goes in this subject). I hope there will be a solution anytime soon.

Cannot load 3.6 - disk image failed to mount - reason: corrupt image

Tried to load 3.6 and get the msg: disk image failed to mount. Reason: corrupt image.
== This happened ==
Every time Firefox opened

*Firefox 4 versions and later do not run on a PowerPC Mac.
*Firefox 4 and later require at least OS X 10.5 and an Intel Mac.
* http://www.mozilla.com/firefox/6.0/system-requirements/
For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
* http://www.floodgap.com/software/tenfourfox/
* http://tenfourfox.blogspot.com/2011/08/601-now-available.html
Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
* http://www.mozilla.com/en-US/firefox/all-older.html

Imaging failed with error 175

We recently updated all of our servers with the new ZDM7NWSP1IR4HP1. We distributed the zenworks update through our zenworks for servers so we downloaded the CPK files. Updates were successful except now we have lost our reimage on next boot functionality on all servers. We get the message "imaging failed with error 175". We downloaded and tried the Zenworks Imaging Driver Update for October 2009. We tried this on one server in our environment that we use for testing purposes. This did not fix the problem.
Can anyone help us? We don't see anything additional on the support site to patch.

Originally Posted by spond
Busytech710,
could you please
1) boot to ZENworks maintenance mode
2) export DEVELOPER_LOG=a
3) perform the imaging task and send me the imglog
spond at novell dot com
Shaun Pond
I will be glad to try this and send you the log. I too tried installing the service pack with winsetup.exe and found that also worked for me as far as making image on next boot work. We really want the CPK method to work as we have so many servers and we were able to update them all in one day versus weeks using winsetup.exe. I'll respond back with info you need as soon as possible.

Annoying hand tool issu: image keeps moving up and down when I drop the mouse!

Hi everybody!
I tried to install the latest pacth but that doesn't fix my problem. (photoshop CS5 12.04 MAC)
As i said in the title: when I'm under hand tool mode or when I hold the spacebar down to get the hand tool, the image mouves around and just continue to glide as if it wears ice skates!
The little problem slow down my work so much and I can't bear this any more....
Any idea about this?

Under Photoshop>Preferences>General, uncheck Enable Flick Panning and see if that makes a difference.
(from photoshop cs6, but cs5 has the same option)

Images fail to load completely

I regularly visit a web site which displays many photographs. Often some of the images fail to load completely, I may see the top 30% of the image and the rest shows as a grey box. Pasting the same URL into Firefox, shows the whole image.
Any ideas? This has been a long term problem with Safari, both on a MBP and PowerBook G4.
MacBook Pro Mac OS X (10.4.6)

Helpful if you post the web site so we can have a look.

AREA TOOLS FOR IMAGE MAPPING TOOLS ARE MISSING (CC 2014.1.1)

Hi guys,
I am missing AREA TOOLS FOR IMAGE MAPS from version 2014.1.1. where can I switch them on please???
I hove got this panel switched on, but tools are gone.
Thank you
Jan

Switch to Design View (click the small triangle next to the Live View button), those options aren't available in the Live View Editor yet.

Ldap test tool and auth failing after upgrade to 11gR2

Hi All,
We have recently upgraded our apex database from 10.2.0.3.0 to 11.2.0.2.0 using apex 3.2. We have been able to confirm that all apex applications work as expected apart from the apex ldap utility. The tool returns "Authentication failed!" even though the ldap server port and DN string have not changed from previously. We can confirm that ldap bind works as well as using the sql directly through the database.
Has anyone come accross any problems with something similar?
Thanks in advance,
Brett

Got it resolved. Since we are using a custom LDAP application we had to run the script not only for the DB account APEX_030200 but also the DB Account that is associated with the workspace containing the custom application or package.

When I download the 3.6.3 version I get a warning pop up saying 'the following disk images failed to mount'. What do I need to do to stop this from happening?

After downloading the a pop up box called Warning appears with saying 'The following disk images failed to mount' and below that there is a table that has Image with a Firefox 3.6.3 and another field called Reason saying Corrupt image. The current version of firefox I am using is 2.0.0.7
== This happened ==
Every time Firefox opened
== Recently when trying to download a newer version

Firefox 3.0 and 3.5/6 versions require at least Mac OS X 10.4
http://www.mozilla.com/en-US/firefox/system-requirements.html - Mozilla Firefox 3.6 System Requirements
Firefox 2.0.0.20 is the last release that runs on Mac OS X 10.2 and 10.3
See http://kb.mozillazine.org/Installing_Firefox
Mac: http://download.mozilla.org/?product=firefox-2.0.0.20&os=osx&lang=en-US

S650 tool dl image fail

Similar Messages

Maybe you are looking for