S651 and 180W PSU, is it enough?

Question

I have 180W PSU that's powering up my P4 1.8 system. Complete specs:
P4 1.8 @ 2.4
MS-6533
256 Kingston
GA-Maya R9000Pro 64Mb
2 Maxtor 7200 rpm HDD (80 & 20 Gb)
8x4x32 (old) Sony cdrw
a floppy drive
PCI Winfast Tv tunner.
Logitech optical usb mouse
MS intellitype KB
Samsung 753DF 17" monitor.
Windows XP SP1
180W unbranded mATX casing
so far, I never have problem running the pc with these specs, but few days ago, i tried adding a pci sound card (SB live!), the system hung while loading windows .
I also uninstalled the driver for my onboard soundcard, and disabled it at the bios, still no change .
Could this be PSU problem?
The largest power rating i've seen for mATX PSU is 200W, Have u guys seen any higher than this?
Hehe thx for reading :D (and reply perhaps  :P )

Answer 1

sys info
Intell [email protected]
MS-6533G/L
256Mb kingston Pc2100 DDR266
2 Maxtor 80Gig harddrives
1 Msi 52x24x52 cdrw
and a old 52 x cdrom.
And now for the $ 1,000,000.00$ ?.
when in post startup AKA booting up the system
PCI DEVICE LISTING'S
Bus No.          Device No.         Func No.
  0                  2                 2
  0                  2                 3
  0                  2                 5
  0                  2                 7
  0                  6                 0
  0                  7                 0
  0                  7                 1
  0                  8                 0
  1                  0                 0
Vender/Device           Class              device class
 1039   7001            0C03         Serial Bus Cntrlr    
 1039   7001            0C03         Serial Bus Cntrlr
 1039   5513            0101         IDE Cntrlr
 1039   7012            0401         Multimedia Cntrlr
 121A   0002            0400         Multimedia Cntrlr
 1102   0002            0401         Multimedia Cntrlr
 1102   7002            0980          Input Device
 14F1   2013            0780         My Modem
 1039   6325            0300         Display Cntrlr
                                    ACPI CONTROLLER
IRQ
 11
 11
 14
 7
 N/A
 3
 N/A
 9
 11
 9
This is what i did step by step to get mine to install
1. shut down puter.
2. put card in center slot on pci.
3. turn on ststem have your cd in drive.
4. when windows open's the box click on have disk.
5. install all drivers and restart.
6. when add new hardware box opens goto sound/vidoe/gamecntrlr. click next.
!!!!!!!!NOW FOR THE REAL INSTALL!!!!!!!!!!!
          SYSTEM WILL RESTART
WHEN THE SETUP BOX OPENS
Go with Custom Install
uncheck the install DOS DRIVERS
CLICK NEXT, CLICK NEXT, CLICK FINISH
NOW FOR THE BIOS SETUP TO GET IT TO WORK
1. goto INTE Periph {press enter}
2. Sis onchip PCIDevice's {press enter}
3. SIS-7012  Change to Disabled {press enter}
4. save and exit Bios
let system start
goto startsettings/control panel {click on multimedia}
in the multimedia properties window { AUDIO }
PREFERRED DEVICE your sound card should be listed there click ok and restart  :P  :P  :P