S7-392 issue with Hyper-V and Windows 10

Hi, I upgraded my S7-392 to Windows 10, and as soon as I enable Hyper-V in Windows 10 and reboot, the screen gets stuck at the boot logo. The progress ring is spinning and nothing happens after that. I can login in safe mode and disable the Hyper-V, and the system boots normally. I tried this many times. Everytime I enable Hyper-V, I am unable to boot into windows again (until I disable Hyper-V). I also performed a clean install of Windows 10 pro on my S7-392, and the same problem persists. Any solution to this. This is really urgent and important. This is my primary development machine, and I need to run Windows Phone Emulators in Visual Studio. Thanks and appreciate quick help. Naweed

found this:http://mou.me.uk/2012/08/27/windows-wont-boot-after-activating-hyper-v-in-windows-8/ yes it's for windows 8 but...can be a good suggestion, so if you didn't already installed updated Intel chipset drivers, give it a try:http://global-download.acer.com/GDFiles/Driver/Chipset/Chipset_Intel_10.1.1.8_W10x64_A.zip?acerid=635730682896833407&Step1=ULTRA-THIN&Step2=ASPIRE&Step3=ASPIRE%20S7-392&OS=10M1&LC=en&BC=ACER&SC=PA_6

Similar Messages

  • HT4527 Is there an issue with home sharing and windows 8?

    Is there an issue with home sharing and windows 8? I've tried everything and cant get mine to work.

    Here is the entire error listing after it states the installation encountered errors.
    Exit Code: 7
    -------------------------------------- Summary --------------------------------------
    - 1 fatal error(s), 2 error(s), 13 warning(s)
    WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
    WARNING: DW066: OS requirements not met for {601CB5BC-03F9-43CC-86F0-C75E65E6AF31}
    WARNING: DW066: OS requirements not met for {56AE7FCC-81B2-4A63-A171-CD95C9295EF2}
    WARNING: DW066: OS requirements not met for {4717AE70-5377-45C7-A9E9-4E400485F0BF}
    WARNING: DW066: OS requirements not met for {8B59B329-26C1-48A4-A5AA-923F55B17B87}
    WARNING: DW066: OS requirements not met for {948B7277-3D4C-4672-B1DB-24B3C83D704E}
    WARNING: DW066: OS requirements not met for {25303D67-B573-460C-A0B6-B5CF2AE05045}
    WARNING: DW066: OS requirements not met for {33E08F4F-42B7-42A9-89E4-443E02738DB0}
    WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
    WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
    WARNING: DW066: OS requirements not met for {F9FAC696-2E48-497D-B820-C9A65DA630DF}
    WARNING: DW066: OS requirements not met for {7DE6CDC3-CFEE-4564-813D-3F59E5D71F10}
    WARNING: DW066: OS requirements not met for {C92E440F-EE79-4A28-B1E1-EC82B6F2AF33}
    ERROR: DW020: Found payload conflicts and errors:
    ERROR: DW020:  - Adobe Flash CS5.5 depends on Adobe Flash Player 10 ActiveX to be installed.
    FATAL: DW020: Conflicts were found in the selected payloads. Halting installation.

  • Issues with illustrator 10 and windows 8

    any known issues with illustrator 10 and windows 8...version worked fine on windows xp....new computer with windows 8....now cannot seem to operate. Loads, and shows access but will NOT start up. help ! thanx ttp74

    AI 10 is now 10 years or so old and was never tested on nor designed for Win 7 or Win 8. You should simply assume it's not compatible and will never run properly. feel free to spend your time with the compatibility modes and al lsorts of hacking with the security stuff and otehr settings, but to be honest, it will probably be a waste of time.
    Mylenium

  • I have an issue with the tabs and windows disappearing....?

    I have a constant problem with Firefox now. I notice that with Firefox 4 and 5 there has been a reoccurring problem with the tabs and windows closing on their own. If I have more than one window open, one of them will suddenly disappear and I wont see the tab at the bottom anymore until I click out of the one I am currently on. It is very annoying and only when I get out of Firefox completely will it sometimes reappear. Even more frightening is the fact that when I move the mouse downward to the bottom of the page the page shuts out as if I clicked out of it.
    I am wondering if this is a security issue meaning some type of malware or virus that is manipulating my browser or is this a common issue that has some unknown cause? I would like to know what the cause is and how it can be fixed because it annoys me all the time. Please help!!

    No Issue with the voltage in general. iPad is being charged via USB.
    1. If you connect it directly to the computer - no problem.
    2. If you want to charge it directly from the power socket you will need this:
    http://store.apple.com/uk/product/MB706B/B/apple-usb-power-adapter
    TZ

  • Adobe Acrobat 8 Standard compatibility issues with Office 2007 and Windows 7

    I just updated my platform to Windows 7 and upgraded from Microsoft Office 2003 to Microsoft Office 2007.  The PDF printer did not download and realized that there are compatibility issues with Office 2007.  How could I get this fixed?

    Buy Acrobat 11.

  • Severe Security Issue with Sharing Permissions and Windows

    I recently discovered a severe Security issue with the windows sharing an permission settings:
    I have two users, an admin user and a parental controlled user. On my mac mini, i have a external harddrive connected. On the harddrive, i have three folders, Itunes, Iphoto (Package) and a Temp Folder. I want to share the Harddrive RW for the admin, but only R for the parental user. But the Temp folder should be accessible for RW for the parental as well.
    1. I set the Drive checkbox "ignore ownership" off.
    2. I set the permissions of the drive to admin RW, parental R and Everyone to "no access"
    3. I apply to enclosed Items
    4. I set the permission of the Temp folder to admin RW, parental RW and Everyone to "no access"
    5. I apply to enclosed Items
    6. I go to "File Sharing" in the Preferences and activate SMB sharing for both users
    7. I delete all previous shares
    8. I add the Disk and use the proposed permissions which are admin RW, parental R, Everyone "no access"
    9. I add the Temp folder and use the proposed permissions which are admin RW, parental RW, Everyone "no access" - Funny, there is a new Group called "Temp" created which has custom access on both sharepoints
    10. I connect to the mac over a Windows machine (NTLM auth set appropriatly). Now I try to create a folder on the root of the Disk share, I get a denied message.
    BUT WHEN I GO INTO A SUBFOLDER (eg. ITUNES or IPHOTO), WHICH HAS ALSO JUST "R" PERMISSION FOR THE PARENTAL USER, I AM ABLE TO RW, DELETE AND DO EVERYTHING!!!
    TO RECAPITULATE: THE SHARING PERMISSIONS ARE "R", AND THE FILE PERMISSIONS IN THE RESPECTIVE FOLDERS FOR THE RESPECTIVE USER ARE ALSO JUST "R". BUT THE USER CAN DO EVERYTHING IN THE SUBFOLDERS!!!

    I recently discovered a severe Security issue with the windows sharing an permission settings:
    I have two users, an admin user and a parental controlled user. On my mac mini, i have a external harddrive connected. On the harddrive, i have three folders, Itunes, Iphoto (Package) and a Temp Folder. I want to share the Harddrive RW for the admin, but only R for the parental user. But the Temp folder should be accessible for RW for the parental as well.
    1. I set the Drive checkbox "ignore ownership" off.
    2. I set the permissions of the drive to admin RW, parental R and Everyone to "no access"
    3. I apply to enclosed Items
    4. I set the permission of the Temp folder to admin RW, parental RW and Everyone to "no access"
    5. I apply to enclosed Items
    6. I go to "File Sharing" in the Preferences and activate SMB sharing for both users
    7. I delete all previous shares
    8. I add the Disk and use the proposed permissions which are admin RW, parental R, Everyone "no access"
    9. I add the Temp folder and use the proposed permissions which are admin RW, parental RW, Everyone "no access" - Funny, there is a new Group called "Temp" created which has custom access on both sharepoints
    10. I connect to the mac over a Windows machine (NTLM auth set appropriatly). Now I try to create a folder on the root of the Disk share, I get a denied message.
    BUT WHEN I GO INTO A SUBFOLDER (eg. ITUNES or IPHOTO), WHICH HAS ALSO JUST "R" PERMISSION FOR THE PARENTAL USER, I AM ABLE TO RW, DELETE AND DO EVERYTHING!!!
    TO RECAPITULATE: THE SHARING PERMISSIONS ARE "R", AND THE FILE PERMISSIONS IN THE RESPECTIVE FOLDERS FOR THE RESPECTIVE USER ARE ALSO JUST "R". BUT THE USER CAN DO EVERYTHING IN THE SUBFOLDERS!!!

  • Wireless Router issues with MacBook Pro and Windows XP laptops

    hello,
    I have a d-link wireless router and I have a MacBook Pro and a Windows XP laptops. My issue is that I have to keep rebooting either the router or the modem (which I both replaced) and it still does not work right. Now can mac and windows work simultaneously through a wireless router (d-link) with no issues?

    My problem is that every time I log off either computer, and when I start it back up up again I have to reconfigure all over again for both laptops to get connected to the internet. I called the d-link people and they pretty much said if i still had problem to go their web sites and download their firmware (which I have that version) so I am running out of options because I just can't turn either of them on with out reconfiguring it. Now I am using WPA on them. Could that be the issue? But right now I do not know. This is my first mac and I am getting a little irritated by this. Overall I like the mac except for this little issue. Does that help?

  • Dual monitor issue with 10.8 and Windows 7 (bootcamp)

    I've a read a lot of threads here about people having nightmare-ish problems after upgrading.  Thankfully, this isn't one of them, just a frustration that I'd like advice on.
    My system:  2010 13" MBP, 2.4GHz Intel Core 2 Duo, 8GB RAM, 320GB HD.  Work setup has external 17" Dell Widescreen monitor connected with VGA to miniDisplay adapter.  Home theater setup has 23" Dell monitor connected with HDMI to miniDisplay cable.
    I upgraded from 10.6.8 to 10.8, as I like to stay up to date and it seemed ML fixed many of the Lion issues.  After finding out Front Row is completely gone I just about reverted (my laptop doubles as my home theater control).  I found XBMC, and it works, sort of (anyone with news on whether Front Row will be returned to us, let me know!).
    Enough babbling, my issue:
    When I switch from bootcamp windows 7 back to OS X, my second monitor's resolution is all screwed up (very low) and the dock and menu bar are BOTH on the second (Dell 17") screen, though it's not in a mirror mode.
    Usually the dock is on the laptop screen, and the menu bar is on the second.
    All I have to do is unplug the miniDisplay port and plug it back in, but is there a setting I'm missing to keep me from having to do this?  Also, I've never used Windows at home, so I've never had to switch with the 23 inch monitor connected.  Don't really want to try as that system is working quite well right now.
    Thanks!
    -Rob

    It's NVidia GeForce 320M.
    Just checked the drivers page and the Mac side only lists up to 10.6.8
    Should I assume that the update needs to be on the Windows 7 side?  At one point last November I tried to update on the Windows side and it caused all sorts of **** on my system causing me to have to reinstall both OS X and 7.
    May be worth another try?
    -Rob

  • Mapping issues with Server 2003 and windows 8.1 machine

    We are running Windows Server 2003 and trying to map network drives through a GPO script on a Windows 8.1 machine.  The drives don't get mapped and if they do, it takes them 10minutes or more to show up.  The Folder Redirection is not working
    as well.  Any suggestions?

    Hi,
    This is because
    by default, on client computers, Group
    Policy processing is not synchronous, that is client computers typically do
    not wait for the network for GPO settings to be fully initialized at startup and logon. 
    Solution:
    Enable the
    policy setting Always
    wait for the network at computer startup and logon to set the client computers wait
    for the network for GPO settings to be fully initialized during computer startup and user logon.
    Steps to enable the Policy Setting
    - Open Group Policy Management Console (start -> Run -> Type GPMC.MSC).
    - Edit the required GPO and navigate to
    Computer Configuration/Administrative Templates/System/Logon and enable the option Always
    wait for the network at computer startup and logon 
    Checkout the below thread on similar problem and solution,
    http://social.technet.microsoft.com/Forums/en-US/285e5a93-a5c8-4725-9067-af48bcde5c78/user-home-folder-problem?forum=winserverfiles
    Regards,
    Gopi
    JiJi
    Technologies

  • Has anyone seen issues with NI products and Windows XP SP2?

    Our IT dept is talking about the above update.
    Since I support everything NI produces, I am looking for any issues that may be related.
    Thanks in advance for helping me out on this!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

    Windows XP SP2 is a major update with a lot of changes especially in the area of network security. As most of NI's software products were released before this service pack we haven't been able to test our software with this maintenance release so some issues may exist.
    Currently we are testing all of our software products on XP SP2 systems documenting all issues we find in the KnowledgeBase. Please search the KB for the keywords XP SP2.
    Currently you should find at least three documented issues there.
    Best regards,
    Jochen
    NI-Germany

  • My itunes account shuts down for no reason.  It wont recognize my iphone and there is an issue with network connectivity and itunes.  I have already  reinstalled itunes and did a syste restore on my computer, firewall checked and virus scan done.  Ideas??

    My itunes account on windows xp shuts down for no reason.  If even try to delete something from my library it shuts down.   It wont recognize my iphone and there is an issue with network connectivity and I can't connect to the store.  I have already  reinstalled itunes and did a system restore on my computer, firewall has been checked, itunes is ok on firewall and virus scan done.  Ideas??

    Same problem. I can see the itunes store so not a problem with windows firewall. The account is active on my iphone so i know i am not locked out. I can connect the PC to my iphone so i know itunes is working ok. It is just logging into itunes on this pc which doesn't work. Only thing I can think of is that the email address I use for my apple id has been offline for a while and is working again now, I'm wondering whether this has been the case for others who are having this issue?

  • Issue with Information broadcasting and pre-cal server in SAP BI

    Hi Experts,
    I have issue with information Broadcasting and Pre-cal server. I have a worrkbook whcih runs from information broadcasting in pre-cal server. Workbook is desinged on single query and workbook contains visual basic code. workbook has a variable which is controlled by Control query in information broadcasting.
    I have 20 employees every month I need to send workbook via e-mail from information broadcasting.  The problem is sometimes all 20 employees will recieve e-mails and sometimes not. I identified there is something wrong in workbook or in pre-cal server.
    because after workbook calculation in pre-cal server is not pushing to SOST so there is something wrong in workbook or in pre-cal server.
    I closely observed pre-cal server front end log. There are few operations performing on workbook in pre-cal server
    like Open workbook, Calculate workbook, Save woorkbook and close workbook. In success case pre-cal sever is performing all the operations but in failure case pre-cal server is missing Close workbook case.
    Below log In pulled from pre-cal server
    Can you please tell what could be the problem.
    Successful job
    3/11/2011 9:29:46 AM (3) -> RS_PREC_LAUNCH_EXCEL i nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    2PCUG9ZPPP'. nvoked in thread 3 and job 'BIBCAST4L4EIS7TOR5BWG0
    3/11/2011 9:29:46 AM (3) -> InitConnection in thre ad 3
    3/11/2011 9:29:46 AM (3) -> Trying to open "C:\Pro gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    xla" gram Files\Common Files\SAP Shared\BW\BExAnalyzer.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:18 AM (4) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:30:35 AM (3) -> Using Version 7100.4.1 200.35 of BExAnalyzer.xla
    3/11/2011 9:30:35 AM (3) -> PID of Excel process: "2504"
    3/11/2011 9:30:35 AM (3) -> EndOfInitConnection in  thread 3
    3/11/2011 9:30:35 AM (3) -> RS_PREC_LAUNCH_EXCEL f inished
    3/11/2011 9:30:36 AM (0) -> Calculation Request 91 1A35ED029D4D79DD7A000200000000 received for job 'B
    IBCAST4L4EIS7TOR5BWG02PCUG9ZPPP'. 1A35ED029D4D79DD7A000200000000 received for job 'B
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS invoked.
    3/11/2011 9:30:52 AM (6) -> RS_PREC_GET_SERVER_STA TUS finished
    3/11/2011 9:31:22 AM (0) -> Opening workbook: C:\W INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    DVLYAPC2SYIC7F1AAIO_0.xls INDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECMML4NN
    3/11/2011 9:31:43 AM (0) -> Refresh BExAnalyzer.xl a!MenuRefreshPrecalc returned with 1.
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls saved. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:43 AM (0) -> Calculated workbook C: \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    4NNDVLYAPC2SYIC7F1AAIO_0.xls closed. \WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECMML
    3/11/2011 9:31:44 AM (0) -> Excel based operations  finished.
    Failure job
    3/10/2011 10:22:58 AM (1) -> RS_PREC_LAUNCH_EXCEL invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    TGJR0462ZFX'. invoked in thread 1 and job 'BIBCAST4L41566ZBZDN2N
    3/10/2011 10:22:58 AM (1) -> InitConnection in thr ead 1
    3/10/2011 10:22:58 AM (1) -> Trying to open "C:\Pr ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    .xla" ogram Files\Common Files\SAP Shared\BW\BExAnalyzer
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:23:20 AM (3) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:23:44 AM (1) -> Using Version 7100.4. 1200.35 of BExAnalyzer.xla
    3/10/2011 10:23:44 AM (1) -> PID of Excel process:  "2544"
    3/10/2011 10:23:44 AM (1) -> EndOfInitConnection i n thread 1
    3/10/2011 10:23:44 AM (1) -> RS_PREC_LAUNCH_EXCEL finished
    3/10/2011 10:23:44 AM (5) -> Calculation Request 9 11A35ED02654D789871000900000000 received for job '
    BIBCAST4L41566ZBZDN2NTGJR0462ZFX'. 11A35ED02654D789871000900000000 received for job '
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS invoked.
    3/10/2011 10:24:27 AM (0) -> RS_PREC_GET_SERVER_ST ATUS finished
    3/10/2011 10:24:31 AM (5) -> Opening workbook: C:\ WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    A8O8D8FBHYCR4HVB5UI8_0.xls WINDOWS\TEMP\BW\Analyzer\Workbooks\SAPBEXPRECQB2VE
    3/10/2011 10:24:52 AM (5) -> Refresh BExAnalyzer.x la!MenuRefreshPrecalc returned with 1.
    3/10/2011 10:24:52 AM (5) -> Calculated workbook C :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    2VEA8O8D8FBHYCR4HVB5UI8_0.xls saved. :\WINDOWS\TEMP\BW\Analyzer\Workbooks
    SAPBEXPRECQB
    Thanks in advance
    Narendra

    Hi Ravikanth,
    Thank you very much for the reply
    I went into RSPRECADMIN and clicked on 'Display Current Queue'.  There we have 3 sections
    1) Queue Overview of Open Precalculations
    I can see this section is always blank after running IB also
    2) Queue Overview of Current Precalculations
    In this section I can see an entry after running IB and duration is changing. but some time workbook in this section will never processed but the duration column is changing may be something is happening at this stage.
    If the entry is not proccessed in this section and IB SM37 job will never end. I manually cancelled the job from SM50.
    Don't why the workbook is taking long time and will never end even though I cancelled the SM37 IB job.
    3) Queue Overview of Proccessed Error-Free Precalculations
    All the error free workbooks which means all pre-cal server completed workbook calculation and sent to SOST.
    I manually ran the workbook for all the 20 employees I can't find any pop-up message (earlier we have pop-up windows appearing because of VB code and when report returns no data and we fixed the pop-up issues)
    Can you please help me further to trace the error.
    Thank you
    Narendra

  • Issues with Office 2010 and Acrobat Pro 8

    Good Day All;
    We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
    Any comments would be helpful
    Regards
    Chomp

    Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
    Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

  • Driver issues with HP Z440 and SCCM 2012 R2?

    Greetings, we received our first charges of Z440 workstations last week. We immediately downloaded the HP Z440 driverpack from http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html and imported those into our System Center Configuration Manager 2012 R2. Of course we did use the Win 8.1 drivers to inject into our boot image and wie normally imported the Windows 7 drivers for the Windows 7 deployment.Well, unfortunately SCCM WinPE5 does not show any drives installed, even with the correct drivers installed. We even tried to import  the WinPE 5 driver pack and the drivers from SoftPaq download manager, but none of those seemed to work. Is there any known issues with Z440s drivers and SCCM? Please help me out on this, it's pretty urgent. Thank you & kind regards

    The problem cannot be replicated. My Z440 has an 1TB WD SATA drive attached to port 0 of sSATA 6 Gb/s. Download and install the ´Windows Assessment and Deployment Kit (Windows ADK) for Windows 8.1 Update´:   https://www.microsoft.com/en-US/download/details.aspx?id=39982 Download and extract the ´Intel Rapid Storage Technology Enterprise Utility and Driver for Microsoft Windows (64-bit Editions)´, 4.1.0.1046 B(12 Nov 2014), sp69762.exe:http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6978829&swItemId=wk_139802_1&swEnvOid=4059 Copy the IRST driver “64bit_RSTe_4.1.0.1046_F6_Drivers” abd sub folders into “C:\z440_x64\64bit_RSTe_4.1.0.1046_F6_Drivers” Open the ´Deployment and Imaging Tools Environment´ command window as administrator and create bootable USB media:copype amd64 c:\winpe_x64 Dism /Mount-image /ImageFile:c:\winpe_x64\media\sources\boot.wim /index:1 /MountDir:c:\winpe_x64\mountDism /Add-Driver /image:C:\winpe_x64\mount /driver:C:\z440_x64 /recurseDism /Get-Drivers /image:C:\winpe_x64\mountdism /unmount-wim /Mountdir:c:\winpe_x64\mount /commitMakeWinPEMedia /UFD c:\winpe_x64 d: Boot Z440 to F10 Setup.Set Factory Defaults and exit.Boot to WinPE media created above.I also tested the wim file as the boot image in SCCM 2012. The hard drive is detected correctly. 

  • Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Has anyone received an update on apple tv issue with HD movies and what they are doing about it

    Whatever the rep told you, it is complete nonsense. There is clearly a problem at your end, the Apple TV 3 is capable of more than the Apple TV 2, and you clearly have the Apple TV 2 working perfectly. Since the Apple TV 2 is able to download from the Internet properly, then my suspicion would be your problem lies on your local network. Interference is a common problem on local networks.
    Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Maybe you are looking for