S7000 2.1 speaker don't wake up after sleep. Needs manual turn off and back on - Frustrating!

The speakers seem to go to sleep after about 10 minutes of no use (because you're authoring a document for 15 minutes with no audio/video playing). Now, you want to play some audio/video, the speakers don't automatically wake up! You have to manually turn them off and turn them back on. No speaker system in my history ever needs this manual on/off! Very frustrating!!! Please give me a workaround or fix. Ready to return speakers if I don't have a solution. Just bought and installed them 2 days back and already quite frustrated.

I am having the same exact problem. Here is an excerpt from my system log when the freeze occurs.
At 1-31 11:00:07 I open the lid. About a minute later I have to do a hard restart because the desktop will not come up. The Caps Lock and Num Lock keys both respond to input, so I have no idea what is going on here.
Jan 31 10:44:00 dhcp243-158 kernel[0]: System Sleep
Jan 31 11:00:07 kerry-carpenters-computer kernel[0]: System Wake
Jan 31 10:44:00 dhcp243-158 configd[14]: setting hostname to "kerry-carpenters-computer.local"
Jan 31 10:44:00 dhcp243-158 configd[14]: rtmsg: error writing to routing socket
Jan 31 11:00:07: --- last message repeated 1 time ---
Jan 31 11:00:07 dhcp243-158 configd[14]: setting hostname to "dhcp243-158.plymouth.edu"
Jan 31 11:00:12 dhcp243-158 kernel[0]: AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
Jan 31 11:00:19 dhcp243-158 kernel[0]: AppleYukon2: 00000000,00000000 sk98osx_dnet - recovering from missed interrupt
Jan 31 11:01:12 localhost kernel[0]: npvhash=4095
Jan 31 11:01:09 localhost com.apple.launchctl.System[2]: launchctl: Dubious permissions on file (skipping): /Library/LaunchDaemons/uk.co.dssw.wakeassist.plist
Jan 31 11:01:12 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/AVCAssistant.plist
Jan 31 11:01:12 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Jan 31 11:01:12 localhost com.apple.launchd[1] (xxx.qnation.PeerGuardian.kextload): Unknown key: ServiceDescription
Jan 31 11:01:12 localhost com.apple.launchd[1] (com.apple.mio.AVCAssistant): Conflict with job: 0x100830.AVCAssistant over Mach service: com.apple.mio.AVCAssistant

Similar Messages

  • In updating my iPod to 6.1.2, I received an error during the update.  Now, ipod is not rebooting.  Has screen showing usb to Itunes picture.   Turning off and back on it goes back to this picture.  I don't know how to reset so that I can restore my backup

    In updating my iPod to 6.1.2, I received an error during the update.  Now, my ipod is not rebooting.  It continues to display a screen showing usb to Itunes picture.   Turning off and back on, it goes back to this picture.  I don't know how to reset so that I can restore from my backup.
    A similar thing happened when I updated the ios on my ipad.  But, I was able to reboot, and then restore from backup.   How can I get my ipod to reboot and allow restore when it is not even recognized as I reconnect to my computer?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • X120e 0596 screen wont wake up after sleep mode until unplug it and remove the battery

    I recently purchased a Thinkpad X120e (0596) and am genneraly very happy with it however when it goes to sleep the screen does not wake up when the laptop does. when i wake it up i hear the fan spin up but the the screen remans powered off. ive tried waiting several minutes and it still doesnt wake up, ive also tried holding the power button for several (more than 5 ) seconds to force it to power off fully then start it again and the screen still doesnt wake up. the only way i can get it to work again is to make sure to unplug it and remove the battery for several seconds then i can get it to boot with the normaly expected complaints from windows after an abnormal shutdown.
    I have the latest updates from lenovo and microsoft installed including the latest firmware. I like the laptop so i would rather report the problem and provide any information neccisary to find a resolution than have to return it. Ive seen this problem with other laptops before and know its probably a  bug in the firmware thats not waking up the GPU is ther any tool i can use to provide the debuging info or any more direct way for me to report the bug I tried calling customer support and they told me they told me my only option was to return it and they could not report or record the issue.

    Same issue here, confirmed many times in linux, will likely recur at some point now that I am on windows (8).  The event log from the HAL says "The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system" even after successful suspends, so who knows what happens when it fails. Since it's video-related, the problem could as well be in AMD's driver (also hinting at this is the fact the system periodically freezes when the screen is simply turned off from being idle).
    Also worth noting is the fact suspend seemed to work just fine on my system with the factory BIOS (1.08), with the issue appearing only in newer ones (the oldest one still available for download is already affected, and I am running the latest one). There are also slight differences in the issue between the legacy and UEFI boot modes, but none of them mitigate it.

  • 1G iTouch won't wake up after sleep

    1G iTouch won't wake up after sleep. When I plug it back into my laptop it does a complete reboot. Tried both reset and restore. Works fine as long as plugged in. It shows a full battery and drains properly but once it goes to sleep it acts like battery is fully discharged.

    Is the iPod or the laptop going to sleep?
    I can't tell for sure from your post.
    When you restored, was it "as a new iPod" or from a backup?
    What software is on the Touch?
    Scott

  • Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

    Gen 4 iPad will wake up from "sleep mode" on its own and stay on till fully discharged, getting fairly hot in the process

    I think I have the same problem. The whole sequence is:
    * Put MacBook Pro to sleep by closing lid.
    * After some period of time that varies, I notice sleep LED is no longer pulsing.
    * The case is VERY hot.
    * When I open the lid, the display stays black.
    * No sequence of keys or closing/opening lid wakes display.
    * Only way to recover is to power cycle.
    * Problem is VERY intermittant -- I do not know how to reproduce it at will. AppleCare service had it for a whole week and couldn't reproduce it, whereas for me it occurs once every 1 or 2 days.
    Actions:
    * AppleCare service replaced the main logic board in early June, but it didn't help.
    * I did a clean erase and install, but it didn't help.
    * AppleCare service had the unit for a full week in July and couldn't reproduce the problem, so they returned it and it still had the problem.
    I have a Logitech Bluetooth mouse, don't know model other than M-RBB93. I'll UNset "Allow Bluetooth to wake..." and will also turn off the bluetooth mouse before closing lid. I'll post my results.
    Meanwhile, please let me know if anyone determines a solution!

  • Mac Mini 2014 Oct cannot wake up after sleep

    Mac Mini 2014 Oct Version, cannot wake up after sleep by typing on keyboard or moving mouse (both hardwired USB) if external HDMI screen goes to sleep mode too (usually after 1 min if no signal coming from the MAC). To wake up, I ust turn off and turn on the screen and keep typing on the keyboard. I already checked "prevent computer from sleeping if display goes to sleep". But does not help. This is very annoying. I now try to set the sleep timer to more than 1 hour. Wasting my energy and not helping. I tried connecting my HDMI screen to a HDMI to mini-Display port adaptor cable, then plug into the thunderbolt port of the MAC. Same issue, no improvement.

    I may know whats going on with the wake from sleep issue. I have a Mac Mini 2012 but this  fix (see below) should work on any product running 10.8.2 Mine is at 10.10.1 and it worked.   First off you can tell if your Mac Mini is in sleep mode by looking at the small light on the front of the Mini. If its pulsing... going from bright to dim its in sleep mode. If you put your Mac in sleep mode, or it goes into sleep mode it will wake from sleep BUT ONLY for the first 4 hours. After 4 hours it will go into what is known as "safe sleep".  The light on the front will be off and you won't be able to wake your Mac. The only way to wake the Mac when in safe sleep is to hit the power button and then wait a minute or longer as your system will need to pull the data from the disk and load to ram. This is causing the issue where its not waking from sleep. You can move your mouse or hit the keys all you want but it won't wake from sleep. This is a real pain as you have to press the power button on the back of the Mac mini and wait for the system to come out of its slumber.   Here's what Apple says:
    With the release of the OS X Mountain Lion v10.8.2 supplemental update 2.0, a new feature was introduced to enter safe sleep after four hours of the computer being connected to AC power. This is an effort to comply with the European Energy Standards (ErP Lot6). This will only occur if there is no wireless or Ethernet activity and no activity from external devices such as USB storage devices. This is normal behavior for the following models:
    MacBook Pro (Mid 2012 and later)
    MacBook Pro (Retina, Mid 2012 and later)
    MacBook Air (Mid 2012 and later)
    iMac (Late 2012 and later)
    Mac mini (Late 2012 and later)
    I have found a fix that puts an end to this nonsense..... Go to the Mac terminal (Google if you don't know how or youtube) and run the following commands (Very easy to do and if a novice like my self can do you can for sure)
    1. When in the terminal mode type:
    pmset -g          This will show your current configuration of your sleep, hibernate, etc You may want to print so you can restore these values if needed.
    2. Change your standbydelay to  86400    86400 is number of seconds which is 24 hours. Here’s the command:
    sudo pmset -a standbydelay 86400
    3. Change autopoweroffdelay to 86400  Here’s the command:
    sudo pmset -a autopoweroffdelay 86400
    4. At last but not least change autopoweroff to 0   Here’s the command:
    sudo pmset -a autopoweroff  0
    Run pmset -g to verify your setting have changed.  I rebooted my system and checked again to make sure.  Since I made the changes no more going into Safe sleep!!! You can change the values to what you like. I used 86400 secs. (24 hours)  I hope this helps!

  • Not wake up after sleep

    My new (2011) MacBook Pro does not wake up after sleep and this happens about 1 time in 10.

    Hello, I have a Mac Book Pro and have the same problem, I close the lid, I have tried every possible thing I have read, and the problem is still here.
    Things I have done:
    - SMS Reset.
    - PR reset,
    - Installed Caffeine and solve temporaly the problem, but using annother display.
    The mac´s screen only turns on some seconds in grey when start chim sounds, but it turns off, however, I could run the mac but keyboard, keyboard backligth´s and mouse pad don´t work
    I ran the Apple Hardware Test complete and It says there is no problem. This not The truth.
    Thying a solution, I did a recovery from newest version and now it get worst and only can see the computer torning on, chim sounds, screen goes on in grey, them screen torns of ando the white ligth gets on and some seconds later start twinkle. Even when the lip reamins opened always, nor the keyboard, keyboard´s bacligth and the mouse pad woks.
    I for real don´t know wath to do, I am almost crazy, almost trow this mac to the trash and buy a new windows computer. Please, help to recover my mac!!!

  • My macbook pro doesn't wake up after sleep

    my macbook pro doesn't wake up after sleep

    I'm having the same issue. I've had my logic board replaced twice now, which I did last week and then Monday I had to take it to a Genius Bar again because my hard drive cable was malfunctioning. I don't know why it's happening but I'm really starting to get frustrated with my machine. I bought my MacBook Pro brand new last year in September and ever since I've dropped it in November, it's been really glitchy. After I dropped it, I had to replace my Logic board, graphics card, and hard drive and they covered it.

  • Time doesn't update periodically, links don't open in emails, turning off and on at least once a day...any ideas why???

    I'm having to turn off and on my iPhone at least once a day to update time, and/or to receive texts that are not coming through when they should've gone through.  Also, why don't the links open when i click on them from my email?  Also, phone has to reconnect to wifi every time I unlock it.  Any recommendations???

    First thing to try is a reboot of your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
    This is something that often cures strange problems like yours. I hope it works for you.

  • HP P1102w printer will not wake up after sleep (wireless setup, win8)

    Bought this printer a month ago.  I have no problem with both LAN +Wireless setup.
    Windows8 OS
    I noticed once the printer is not on (goes to sleep), it will not wake up by itself.
    According to manual, if I send a print job, it should wake up by itself.
    Currently, this is what I need to do.
    I need to physically turn off and turn on the printer, wait for 10-15 seconds until the wifi blue light is solid (no blinking)
    and then send my print job, and it will work
    Just wondering whether HP has a solution to this, thanks
    This question was solved.
    View Solution.

    Is HP ever going to fix / address this issue? 
    People Running the latest firmware - 20130703
    And there is no option to disable Sleep mode.  The max you can set it to is 1 hour.
    The power physically / manually has to be powered back on, to establish IP connectivity.
    This has been an issue for 2 years now!!! Come on what does it take to get an update?
    Seriously?

  • Where can i exchange my not working iphone bought in Switzerland (on july 12, 2012.) that just turned off and not working since. In croatian store they don't want to give me replacement phone!!!!

    I have bought iphone 4s on July 12, 2012.in Zurich in offical Apple store (Glattzentrum) and after one and a half months it just turned off and not working since. I tried three charges and nothing (it detects that charger is on but it cannot be charged). So now I have a not working phone only two and something months after purchase. But the problem is that in Croatia we have two apple reseller stores and neither don't want to exchange it, although is under warranty!!!! The closest stores are 250 km from Zagreb...Of course I have contacted Apple store in Zurich but they told me to come in Switzerland or to send credit card data for receiving new iphone, the problem is I don't have credit card with 700 euro on it!!!! what to do?? who to call ??? where to get replacment device cause this is disaster???? I wanted to buy ipad but after all this I doubt to do so...I have not working Iphone payed around 700 chf or 800 usd and cannot change it in my country, is it possible for such vast organization like apple that this things can occur????? So much for customer support

    “the EU is considered one country for warranty purposes“
    Not the case at all whilst there are harmonized minimum standards governing guarantees, warrantees remain national as these vary (Add to) minimum legal protection.
    Some how you need to get your phone back to Switzerland.

  • Memory RAM upgrade won't wake up after sleep mode

    i just recently purchase a pair  16GB RAM of crucial  CT2K8G3S160BM for newegg.com. Yeesterday i try put this on my macbook i7 intel 2.9 processor that crucial said is compatible. but found out everything was good until i close my mac lid for hibernate. What happen is, it won't wake up no matter what i do until a way of reset SMC. BTW i try stick by stick to plug in together with my original 4gb RAM together found out 1 was ok and other one was not. But somehow why the info of hardware show that memory ram 16GB was installed and was OK. Everything was run smooth even booting. The only problem is won't wake up after sleep mode. I already try reset smc, pram, delete startimage, delete powermanagement.file and also sudo hibernate 0-7. Did anyone had this same issue of me. I'm my curiousity will it be the bad ram or software problem.

    i just google around and found this two both crucial ram. Both spec are the same but different model no.
      CT102464BF160B 16GB  and mine is CT2K8G3S160BM are this 2 same? but both same spec.
    http://www.bhphotovideo.com/c/product/877010-REG/Crucial_Technology_CT102464BF16 0B_16GB_2_x.html
    http://www.bhphotovideo.com/c/product/889298-REG/Crucial_CT2K8G3S160BM_16GB_2x8_ 204P_SODIMM.html

  • HT204291 Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

    Why don't I see the airplay icon in my settings? I have the ios7 installed now my netflix won't work as need to turn off mirroring..... And the airplay device is not installed.... Anyone help on this?.

    Reboot your router. The icon only shows when connected to wifi and Apple TV or similar device. Same thing happened with my phone and the icon appeared in control center after router reboot.

  • HT1212 I need to unlock my iPod. I tried restoring it but a pop up box says that I need to turn off Find my iPod in my iCloud setting, but how am I going to do that when I don't know my password?

    I need to unlock my iPod. I tried restoring it but a pop up box says that I need to turn off Find my iPod in iCloud settings,  but how am i going to do that when I don't know my password?

    http://apple.stackexchange.com/questions/105166/find-my-ipad-setting-prevents-re store/105192#105192

  • IMac won't completely wake up after sleep.

    I have to awken iMac from sleep mode by hiting the power button because even after the screen comes back, the bluetooth keyboard, mouse, and track pad won't reconnect.  I have to turn coputer off and back on to get them working again.  I ran verify, and it found no problems.  I'm running Lion. Any suggestions on what's causing this?

    If you have the iMac plugged in to an old or crowded power strip, as a test, connect it directly to a wall outlet to see of that makes any difference.
    Peripheral devices (USB/FireWire) devices can interfere with sleep, wake, shutdown, and startup. Try going through the SMC reset procedure, as shown here (procedure recently changed by Apple)
    http://support.apple.com/kb/HT3964
    and disconnect ALL cables. Power up with nothing connected except for the power cord. Connect just your keyboard and mouse, then doing sleep and wake.
    Also, make sure the batteries in the Magic Mouse are not getting low. You should try removing them for a few minutes and then putting them back. You should also try re-pairing the mouse at System Preferences Mouse pane +Set Up Bluetooth Mouse+ button.

Maybe you are looking for