S750 Update + Smart Assitant

Hi,
is there a plan to update the S750 to KitKat in the near furture?
There are already new ROMs for phones with the same CPU and similar hardware but not the S750 which is not even listed on the lenovo download page. Is the S750 the IP67 version of another modell and I could use a different ROM?
i like the phone, but I was hopng that an upgrade would solve the small disadvantages there are...

So several people have looked at the message, but no reply - a shame.
I'll wait and see how long the phone will keep on working with the old OS, the browser already needed a replacement, which will be the next piece of software to be incompatible with increasing malware attacks?

Similar Messages

Please help! Ipod not dynamically updating smart playlists!

I have quite a complex system of smart playlists on my 4G color ipod but I can't get any of them to update dynamically away from the computer. I have a total of 6 and here are their preferences:
SPL 1:
match ALL
1) My rating is in the range 4-5 stars
2) Last played is not in the last 1 day
3) Last skipped is not in the last 1 day
4) Playcount is less than 5
limit to 100 by most recently added
SPL 2:
match ALL
1) My rating is in the range 0-3 stars
2) Last played is not in the last 1 day
3) Last skipped is not in the last 1 day
4) Playcount is less than 4
limit to 55 songs by most recently added
SPL 3:
match ALL
1) My rating is in the range 3-5 stars
2) Last played is not in the last 1 day
3) Last skipped is not in the last 1 day
4) Playcount is greater than 5
limit to 30 songs by random
SPL 4:
match ALL
1) Last played is not in the last 1 day
2, 3, 4) Playlist is not SPL 1, SPL 2, or SPL 3
limit to 15 songs by random
Unwanted:
match ANY
1) Time is greater than 15 minutes
2) Genre is Comedy
The active playlist that I use to listen to:
match ANY
1-4) Playlist is SPL 1, SPL 2, SPL 3, or SPL 4
5) Playlist is not Unwanted
So here's the problem. When I sync with my computer, the playlists work great, everything updates as expected and I get a pretty diverse playlist every time I sync which I want. The problem is that while I'm listening to my music on the ipod away from the computer, my playlists don't dynamically update. After I listen to a song, the song's supposed to remove itself from the playlist which doesn't happen, as well as when I skip songs. Even when I rate songs that aren't rated they don't appear in any playlist. This is really frustrating and I can't find a solution anywhere and yes, I do have Live Updating selected. I also have "Match only checked items" selected on all playlists as well. If anyone has any ideas for how to fix this, I would love to know. Thanks!

I was searching this forum and found someone who says that 4th gen ipods have problems live updating smart playlists if the criteria "last skipped" is on the playlist. I took this off of all of my playlists but they still don't work. Then I tried making a playlist that is just "rating is equal to 5 stars" and it WORKS!!! But that doesn't help me out much for my other playlists so maybe it's some other criteria that's causing the problem. Any ideas?

Do Auto-Updating Smart Playlists really work?

I followed the old thread about auto-updating smart playlists not updating automatically on the iPod. Apparently the 2006-1-10 update fixes it, but some smart playlists still aren't updating for me. The simple rating-based playlists work (they update), but more complex smart playlists such as this don't work:
Match All Following Rules:
Podcast is true
Playcount is 0
Time is less than 11:00
Kind contains audio
According to this support document: http://docs.info.apple.com/article.html?artnum=301910 smart playlists should update based on any criteria, but I'm not seeing that. Am I doing something wrong? What types of smart playlists have people gotten to work?
Thanks.

I've posted a better version of this thread in the "Using the iPod with color display" forum.
APPLE DISCUSSION ADMINS: Please delete this thread. Thanks!

3G ipod with non-updating "smart" playlists

It appears that apple managed to disable one of the most widely used features of the ipod with an update last year. Lots of folks have reported that the January firmware update fixed it... but it doesn't contain any new software for 3G (touchwheel) ipods.
Anyone have advice on how to get smart playlists to work on a 3G ipod?

I was searching this forum and found someone who says that 4th gen ipods have problems live updating smart playlists if the criteria "last skipped" is on the playlist. I took this off of all of my playlists but they still don't work. Then I tried making a playlist that is just "rating is equal to 5 stars" and it WORKS!!! But that doesn't help me out much for my other playlists so maybe it's some other criteria that's causing the problem. Any ideas?

How to automatically update Smart LINKED Object

Hi.
This is my first post here, I'm French, so excuse any English mistake i may do.
I'm not an artist / designer / ..., still new about using image software editing like photoshop.
So i downloaded Photoshop CC to try it because i wanted to do something on my spare time.
I want to render digitaly a card collection based on a online Collectible Card Game (Duel of champions if you wanna know).
For this I downloaded their card art from their site.
Then i want to add several effect / filter to render them nicely.
So i read and watch many tutorial in this purpose.
I ended with a good result for 1 card.
Here is an example :
Hi.
This is my first post here, I'm French, so excuse any English mistake i may do.
I'm not an artist / designer / ..., still new about using image software editing like photoshop.
So i downloaded Photoshop CC to try it because i wanted to do something on my spare time.
I want to render digitaly a card collection based on a online Collectible Card Game (Duel of champions if you wanna know).
For this I downloaded their card art from their site.
Then i want to add several effect / filter to render them nicely.
So i read and watch many tutorial in this purpose.
I ended with a good result for 1 card.
Here is an example :
So what i did :
I get a source card art image, adding its red border, embossed it to get relief, adding a gloss effect in 3 different layers (the card art, the border and the gloss effect). Than i duplicate all this layers, swap them vertically and moved down to get a reflection.
I added a gradient to this new group of layers to have a nice fading effect to the reflection.
As I do not want to redo all the process again and again if I change main the source card Art, I want the reflexion to automatically update.
This was done using Smart object, both main source card Art and the (vertically swapped) reflexion card art using the same object storing my different main source card art.
So when i change in this object the main source card art used, it automatically change both the rendered card and its corresponding reflexion.
And then i Added a displacement filter to simulate a water reflection.
And the first problem (solved by now) occurred :
If i want to apply a filter to the group of layers corresponding to the rendered reflexion card, Photoshop have to convert and merged the whole group of layers into another new smart object and then apply a smart filter onto it. That worked but i lost the auto updating of the reflexion as the previous conversion have made Photoshop create in fact a whole new duplicated object storing a my different main source art.
So i partially resolved This by using Smart LINKED object instead of Smart object. I say partially because it is not really fully automated anymore.
Now if I change the main Source card Art to render a new one, I have to "manually" save file / update smart object to get the reflection updated.
I kinda accelerate this using a action performing a batch of saves to get a "save all" options (that clearly miss in photoshop). But for this i still have to open all my smarted linked object in order to apply the "Save All" batch.
But know I want to generalize the process to cards left, and render my whole card collection.
So i created a template based on what i've done so far using in this template Smart LINKED Object for the Main source card art and the reflected one. By the Way I exported the Reflection group in a PSD file, and refered to it as another Smart LINKED Object in my template. Doing so i'm sure Photoshop no more use a temporary PSB object correspond to the converted / merged reflexion Smart Object (remember : created in order to apply a smart Filter on it).
So what Happen now ?
I create a new testing psd file in witch i embed several new smart objects each one is an occurence to my template. Here i have to used smart Object and NOT smart LINKED Object because if so i'll always end up with the same rendered card several times. I have to get Phososhop create it own temporary duplicated object so a modification to one don't affect all the others after "Save All" batch on the corresponding working card.
So with what I have now, if I want to change 1 of the rendered card, i go its corresponding (duplicated) template object and from there i access again my LINKED object storing all my main source card Art.
I change to what source card art I want, and I have to open the reflection smart LINKED Object too in order to apply the "SAve All" batch.
Here is the "fun" (issue) thing : I have to apply the batch 3 time in a row to have the rendered card changed in my main testing psd file. I suppose saving 3 time time propagated the change along the Smart LINKED Object chain.
AND I have to make sure ONLY the corresponding smart (LINKED) Object file are opened before. If another file from a different rendered card is opened too the change will also be propagated to it and so having a duplicated rendered card. (I only want each card rendered once, but using the same template to avoid repetitive work).
So I explained in detail, but maybe not clearly, my situation and the step i went through.
TLDR
To summarize : I have a collections of Card art (jpeg).
I created a Template applying effect to render 1 card.
I created another template appliying same effect to render 1 REFLECTED card.
In both i use the same Smart LINKED Object that Store my collection on Card Art.
I make another Smart LINKED Object in the first template that reference the second one.
So with my first template I can update the rendered card and its rendered reflexion after changing the main source card art in the subsequent smart LINKED Object that store my whole cards art. I have to had all corresponding Smart LINKED Object file OPENED and save them all to have th updated result.
So not really automatic.
Then I want to render my whole card collection with effect and reflexion.
I create in my project a duplicate of my first template for each card to be rendered.
Then I have to open ONLY all subsequent corresponding Smart LINKED(or not) Object file of current working rendered card and change the main source card art, save all the file (several time to propagate change) to properlly update the current rendered card.
I have to do this for EACH of my duplicated template in order to render EACH of my cards.
Definitively not automatic process, and prone to errors.
Do you know a way to fully automatically render my card collection ? The only thing I want to do is chose one time the main source card art for each rendered card.
Finally another way to explain this issue and maybe get an answer is to instead explain simply what I want to do :
I have a collection of (jpeg) card art from an online card game.
I want to render them all with effect (gloss, emboss border, faded and water filtered reflection).
I want to do this automatically.
The only thing i manually want to do is chose the card art to be rendered for each of the card i want to render in my collection.
Here is an image of what i want based on what i've, not automatically, done so far :
Thanks for any help from photophop professional here.

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
Also refer the foll thread:
Material group from R/3 to COMM_CATEGORY (SRM)
Related notes : OSS notes 872819 and 720819.
BR,
Disha.
DO reward points for helpful answers.

Live Updating Smart Playlist... but not live updating iPod?

I have several video files that I want to convert to iPod-compatible MP4. I have a program to do the conversion in a batch mode and then add the files to my iTunes library.
I also have a live-updating Smart Playlist (for all files where the Kind includes 'video' and the playcount is 0) to catch these files as they come in. I have this playlist as one of the ones set to be automatically updated on my iPod.
However, in my test runs, the video is properly converted and added to my iTunes library, and the Smart Playlist picks it up as well. However, it does not then send the file to my iPod (which is already in its dock) unless I first eject the iPod and reconnect it.
I'd really like to get this working, as I'm hoping to do this on a somewhat regular basis--have a selection of stuff queued up when I go to bed, and then have it waiting for me on my iPod when I wake up to go to the gym. It worked for me over the weekend, when I bought an episode of Knight Rider from the music store while the iPod was connected--it was downloaded and added to the playlist, and then copied to the iPod with no intervention from me. Unless my memory is faulty or something.

Welcome to the Discussions Steavis,
As far as I know, a sync to the iPod only occurs upon the first attachment, as long as your settings are set for such action.
The iPod will only sync after the initial attachment if you initiate the sync yourself. I believe it is in a pull-down menu, and/or CTRL-Click the iPod in the source list and select "Sync".
I am not sure if that is all correct, but in my experience, if I have connected my iPod, it syncs, then I say load in a CD to iTunes, I must re-sync the iPod before they transfer.
Not knowing what you are using for this automation to get the app that converts and adds, etc, can do, I might explore a script that runs at a specific time of day and initiates a sync to any iPod connected. That should be fairly easy to do.
Beavis2084

Can't update smart print

I can't update smart print--the HPSPSetup_msi program won't install. I'm using Vista and version 9 of MSIE. Suggestions????

Please follow the instructions here in order and answer all questions in detail.
http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

IPod no longer updates smart playlists after upgrade to 1.3

After upgrading my 5th Gen 30GB iPod to 1.3 I noticed immediately that the smart playlists on my iPod aren't updating any longer. Until 3 days ago my iPod had firmware version 1.2.1 and all smart playlists worked as expected.
I have many smart playlists that I have been happily using everyday for the past 2 years to play only new podcasts, shuffle my favorite tunes based on when they have been played last, and move songs in and out of My Top rated tunes based on their ratings. These no longer work on my iPod, but when I sync with iTunes they update fine. I didn't make any changes to my smart playlists before or immediately after upgrading, at least until I noticed the problem.
For the last couple of days since upgrading I have tried deleting all my smart playlists and recreating them, that didn't help. I have also tried restoring my iPod, which also didn't help. I have also tried creating a very basic smart playlist i.e.
Match all of the following rules - checked
Rating is ***
Live updating - checked
Sync'd that to my iPod and started playing a tune and changed it's rating to 5 stars. I then entered a static playlist, played a song from that and when it was done entered the new 5 star rating smart playlist and it wasn't updated.
I'm don't know what else to try, I've repeated the same test as above on my wife's 2nd Gen nano and it worked as expected. Has anyone else noticed smart playlists failing to update since the upgrade? I have searched here and on google, but only found reference to much older firmwares.

I'm having the same problem, once I've listened to a song in my 0 plays list, go out to a new menu, then back in, all the songs that have been played are still there, when a few weeks ago they were taken off and only unplayed songs were still there. Now if I switch to another playlist and back, I have to scroll all the way back to the point I was when I changed which didn't happen earlier.

Live Updating smart playlists not updating properly

I have been using some live-updating playlists since I first got my iPod. They had been working fine until just last month. I have a Smart Playlist set to be Live Updating, that follows the rule of playcount is 0. It used to work properly; after playing any song on that list, leaving to the menu screen, and going back to the playlist, the song will disappear from the list.
For whatever reason, this playlist will now only update when I sync my iPod with iTunes. It used to update on the fly in the iPod itself, but no longer.
I have not downloaded the updates for iTunes or the iPod, so I don't see what could have caused this change.
And just now, I synced the iPod with iTunes and while the "Yet to be Played" playlist in iTunes shows only four songs, when I go to that same list on the actual iPod, I get 15 songs. I just don't get that at all.

Annoyed,
You might find our little Discussion of this whole Smart Playlist issue:
http://discussions.apple.com/message.jspa?messageID=1514307#1514307
interesting.
In particular, Smart Playlists containing Podcasts have yet to have their functionality restored as I have been discussing with Level 2 Support:
http://discussions.apple.com/message.jspa?messageID=1683550
http://discussions.apple.com/thread.jspa?messageID=1536677#1536677
Kind regards,
Gopha.

Update smart object in another Photoshop file

Ok so I am a logo designer, and I have this photorealistic mockup for logos.
So i have a layout where the main logo is a little above center, and below are two mock ups. So I am trying to have it where I can just make a change in the illustrator file and photoshop can instantly make the change. The problem is that I am using two different mock ups and I have to edit both the mock ups (double click opening another window and pasting the smart object) to use them. The top layer is ok, because it will update itself.
I want a way to edit the illustrator logo and photoshop to make all the changes in all three displays itself. The problem is that the bottom displays open up other photoshop windows, with smart objects within them, but if I open up the top smart object, then it automatically opens illustrator.
So is there a way to just make one change in illustrator and photoshop to automatically update it all.
Link - http://www.sendspace.com/file/vlzur5

Instead of two different files, you may want to combine them into one file and use the layer comp panel to switch between the two views. Then you could alter one smart object and it would affect both views.

Manually and quickly updating smart playlists with 'Live Updating' off?

Hi,
I have a quite large music library (13,000 songs) and use a multitude of nested smart playlists that change often because I don't want to listen to the same song every day and I want to listen to good songs more often than bad songs. I'm also splitting up by genre, because not all my friends appreciate all of my musical tastes, and I myself am not always in the mood for every genre.
The consequence of this is that from time to time, iTunes stutters when playing a new song, presumably because it's updating all the smart playlists when the previous song ended.
Now, I had hoped that turning 'Live Updating' off would cause iTunes to update the smart playlists at startup instead of updating continuously. However, it turns out that though the performance improved dramatically, turning off 'Live Updating' caused the smart playlists to never update. Obviously I don't want that, since that means all my smart playlists are static.
Is there a way to have both good performance and easy updating of the playlists? There are a bit too many playlists to manually update very day by forcing iTunes to update the playlist.
An 'Update all smart playlists now' button or a 'Update all smart playlists at startup' feature would be nice...
Any hints, tips, help, suggestions?
Thank you so much.
Greetings,
Tijl Kindt
Athlon64 3800+ 2GB RAM Windows XP iPod Nano 4GB Black

Using the SDK, you (well, I) would do something like this:
1. Get a list of all the playlists in the iTunes Library.
2. For each playlist, test if playlist is a Smart playlist (Playlist->Smart() returns a boolean)
2a. If it is a smart playlist, select it by setting a property value for the BrowserWindow object (basically BrowserWindow->SelectedPlaylist(playlist object)) (for example perl code, see http://groups.google.com/group/comp.lang.perl.misc/browse_thread/thread/1248563d 743795d8/be1a88fc6eeab0e4?lnk=gst&q=itunesperlselectedplaylist&rnum=1#be1a88fc6eeab0e4)
2b. Using keystrokes (Alt-F,G), select "File..Get Info". Then keystroke Alt-U to toggle live updating, then Enter to click OK.
2c. Repeat above, which should toggle live updating off again. (unfortunately there is no way to be sure whether the starting state was off or on -- I'm assuming it will always be off)

Tip for creating auto-updating Smart Playlists for iPod

Short Answer:
Don't use Smart Playlists that use rules with nested playlists which aren't completely on iPod.
Long Answer:
If you're like me and use nested Smart Playlists, make sure that any Smart Playlist you want to have auto-update on the iPod doesn't use a rule which uses as a criteria a playlist that isn't fully present on iPod (exclamation point next to the Smart Playlist in iTunes when connecting iPod to your Mac).
For example, I have Smart Playlists to exclude certain tracks in other Smart Playlists (Streams, Spoken Word,tracks under 1 minute, etc.). These are tracks that I usually want to exclude in other Smart Playlists but don't want to add those rules each and every time.
The problem is that iPod looks to see if that 'excludes' playlist is present, which obviously it isn't because by it's nature it's designed to exclude tracks. If a nested playlist isn't present it seems the auto-update will not work.
My solution was to create a new Smart Playlist specifically for the iPod, which contained all the rules of my "master exclude" Smart Playlist and any other I wanted specifically for the iPod.
My beef with Apple here is that I can't duplicate a Smart Playlist, which is possible in iPhoto. Being able to do that would make things much easier.
I have since gone about creating 'excludes' playlists so that the playlist itself excludes tracks; previously I was creating a Smart PLaylist that contained (included) all the tracks I wanted to exclude, then using that as a rule (Playlist is not 'Excludes') in other playlists. The second method worked fine on iTunes, since all the tracks are present, but it creates problems on iPod.

I've posted a better version of this thread in the "Using the iPod with color display" forum.
APPLE DISCUSSION ADMINS: Please delete this thread. Thanks!

Live updating smart playlists not actually updating

Apparently, this was a common complaint back in 2007. Well, I am still having this problem.
iPhone 4, iOS 4.3.3
I have a static playlist filled with music called "MUSIC". I have a smart playlist "DYNAMIC" that references "MUSIC", which filters only songs rated 3-5, and not played in the past week. These playlists are just used as a source.
I then have a smart playlist for each genre (e.g. "RAP", "ROCK"), which reference "DYNAMIC", and simply filter the appropriate genre.
All of these smart playlists have "live updating" enabled. They all work as expected in iTunes. They all work as expected on an 5.5G iPod.
However, on the iPhone, when I completely play a song in "RAP", the song is not immediately removed. I expected this, since this is the same behavior on my 5.5G iPod. However, on the iPod, I would simply exit the playlist, then re-enter, and the playlist would be regenerated, removing the played song. This does not work on the iPhone. No matter what I do, the played song is still shown, despite the fact that the DYNAMIC smart playlist should remove the song.
I also tested by playing the song directly from DYNAMIC, and it still does not update. I created a new, basic smart playlist which does nothing but reference the static playlist "MUSIC" and filter out songs played in the past day. It still does not update.
I will note that none of my smart playlists reference a playlist that is not synced on the iPhone. I know that a smart playlist referencing a non-synced playlist can turn the smart playlists static. I doubled checked that this is not the case here.
I will also note that I verified the songs are being marked as played via iTunes.
Hjalp!

Annoyed,
You might find our little Discussion of this whole Smart Playlist issue:
http://discussions.apple.com/message.jspa?messageID=1514307#1514307
interesting.
In particular, Smart Playlists containing Podcasts have yet to have their functionality restored as I have been discussing with Level 2 Support:
http://discussions.apple.com/message.jspa?messageID=1683550
http://discussions.apple.com/thread.jspa?messageID=1536677#1536677
Kind regards,
Gopha.

Updating smart playlists

I have set up a smart playlist, which says not to play songs played in the last 7 days, and limits the playlist to 700 songs so that the playlist will always fit on my 4gb nano.
When I've plugged it in over the last couple of days, it says "cannot update not enough free space".
How do I get it to remove songs that don't conform to the smart playlist rules, so that the songs on the ipod rotate regularly?

Which is fine, but is there no way of automating the process?
Then all I should have to do is plug it in after each days listening, and get continually rotating songs, and not listen to the same songs each day.
If not, fair enough, just seems silly.

Need to Create a Live Update Smart Playlist That Shuts Off After a While

Hi All--
I'm trying to create a smart playlist with the following properties:
1) Every time I play it, it selects a different random set of songs.
2) The playlist plays for a fixed duration, then shuts off. (I like to go to sleep to music, but it wakes me up in the middle of the night if it plays for too long.)
The best I've been able to come up with is to set "not played in the last xx days", "Limit to yy minutes selected by random", and "live updating". However, there's a problem with this: as soon as one song has played, it's purged from the list, which causes live updating to replace it with a new song. As a result, this creates a list that plays forever, since new songs are continuously added to replace the ones that have been played.
I tried turning off live updating, but then I'm stuck with the same songs over and over. I also know about the trick of just using "select random" and deleting the contents of the list, so that live update will repopulate it, but that won't work on an iPod without doing it in iTunes and then re-syncing.
Any ideas?

OK, I think I finally found a way to do this, sorta. This will work on any iPod or iPhone that supports live update and allows the creation of ad-hoc playlists, either named or on-the-go:
1) Create the list as described above.
2) Sync to iPod or iPhone
3a) On a non-touch iPod, highlight the playlist and hold down the select button until you get the menu with "add to on-the-go" in it, and select that.
3b) On an iPod touch or iPhone, create a new playlist, then select the dynamic list and "add all songs" to it.
The playlist you created isn't dynamic, so you'll just play through it once and stop. Deleting the contents from the temporary list and doing step 3a/b over will get you a new set of songs. The dynamic list will purge the songs and update with new ones as you play them from the static list.
It's not perfect, but it's reasonably fast to get a time-bounded selection of music that refreshes each time you want to play the list.

S750 Update + Smart Assitant

Similar Messages

Maybe you are looking for