S820 No 3G network
Hello,
I have a Lenovo S820 v12 with Android 4.2.1. The Wi-Fi connection works fine but I Can't use 3G network to data connection.
I have followed all steps to set up the APN configuration and I have tried to reset my mobile twice, once even in safe mode.
Please, could anyone help me?
About my handset:
IMEI information:
IMEI 862xxxxxxxxxxx
IMEI SV 78
SIM STATUS:
Network: Lycamobile
Signal strength : -93dBm 10asu
Mobile Network type: GPRS
Service type: In service
Roaming: Roaming
Mobile network state: Disconnected
My phone number: +4400000000000
Moderator Note; imei edited for member's own protection
Spoiler (Highlight to read)
Exactly the same problem here - It was mistake to buy this phone.
Similar Messages
-
S820 and X2 Mobile Network connection
Hi, I have two Lenovo Smartphones S820 and X2. I had my S820 for a couple of years and it has been working fine until september 2014 when mobile network started to act up, sometimes it worked and sometimes not. Google maps and a few apps worked all the time. Hotspot was and is still working so there is not a problem with my connection to my mobile network. I dont remember if if it was about that time (september) we got the update with new security. Anyway this year i bought a X2 and found out that it is the same with this one. I have put network speed in notifications and i can see that it is sending/recieving but the apps says no connection. Still on X2 google maps and a few apps is working. One app that i have is "myMail" and this is working as far as downloading the messages text but no pictures. Same still if i start hotspot on one of them i can access internet thru this on the other one.
When is the next version of Android comming for X2? And will it still have the Security app?
It feels like thet is one of the problems.
Regards RaggeHi, I have two Lenovo Smartphones S820 and X2. I had my S820 for a couple of years and it has been working fine until september 2014 when mobile network started to act up, sometimes it worked and sometimes not. Google maps and a few apps worked all the time. Hotspot was and is still working so there is not a problem with my connection to my mobile network. I dont remember if if it was about that time (september) we got the update with new security. Anyway this year i bought a X2 and found out that it is the same with this one. I have put network speed in notifications and i can see that it is sending/recieving but the apps says no connection. Still on X2 google maps and a few apps is working. One app that i have is "myMail" and this is working as far as downloading the messages text but no pictures. Same still if i start hotspot on one of them i can access internet thru this on the other one.
When is the next version of Android comming for X2? And will it still have the Security app?
It feels like thet is one of the problems.
Regards Ragge -
Lenovo s820 Signal lost and often shows Roaming even in Home network
Hi,
From past 1month I am facing issue with the signal strength and calls automatically get disconnected while talking and it often shows roaming even though I am at the Home network. Pls help.
Earlier I thought the issue is with the network provider but later I found that the SIM works good in other Phones issue is with my Lenovo S820.
My Version information:
Model Number : Lenovo S820
Android Version: 4.4.2
Baseband Version: S820.ROW.V104, 2014/11/21 10:59
Build Number: S820_ROW_8G_S222_141121can any one reply
-
S860 and X2, Google not connecting on mobile network.
I live in Sweden. Had my S860 for 3 years and it has been working fine but some months ago it was not connecting on mobile network with crome and play store. Restart and it could work for some time the it was gone again. At the same time Hotspot, skype and OS update is working fine. Got a new sim card i november but it did not help. This was going more and more bad and finally it did not work at all. Tried to reverse OS a few steps back and still not working. So i tought that it was something to do with hardware. Now i bought a Vibe X2. Away from sweden for the moment (Saudi Arabia) but this one does the same when I try to connect. OS update working but Crome says ssl error and Play Store just wont connect. Saw some forums said it might be time and date that was wrong so i tried to change to local format but it was the same. My S860 i was waiting for 6 month before i could buy it (not for sale in Sweden) in Saudi. Haas been very pleased with it so now when it has been messing with me i had no problem to buy a new Lenovo phone. This time just waiting 3 month before i could buy it in Saudi. Hope this is something I can get some help to solve. /Nils
Hi Ragge
Can you tell me your firmware build number(for the S820 and Vibe x2) and Baseband version(for the S820)?Settings->About phone....
''Had my S860 for 3 years and it has been working fine.....Sorry, checked and it is a S820 i have.''
The S820 has been relesed in May 2013.
''Tried to reverse OS a few steps back...''
How did you do that?.
Can you install THIS ->Open the app->MTK Settings->Telephony/BandMode->SIM 1(Do the same for SIM2) and make a screenshot(Power&Volume-) ->post the screenshot here.Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Lenovo s820 not recognized in computer
I am using lenovo s820 for the past 1.5 years. Recently I upgraded it to KitKat OS and post which I'm not able to connect it to computer. Though the usb cable if fine, cell is not recognized by any computer.
I've tried other cables as well as with other systems also but no luck.
SumitTry doing the Reset part of this procedure
http://support.apple.com/kb/ht1430
If the battery is weak, you may want to do the Reset while it is connected to your computer running iTunes. What you need is for iTunes to recognize it and do a Restore. That will erase the iPod, re-install its software, and set it to default settings.
Having the SIM card in there should not matter for doing a Restore.
Also, the process that allows iPhones to run on a different wireless network is called "unlocking" not jail-breaking (which allows software that is not from the App Store to be installed). Unlocking should do no harm. The problem is probably the current state of the iPhone's software not allowing it to start up and run properly. A Restore should fix it, if software is the problem. -
Hi there,
I want to install/move our office over the weekend and have some lose ends, which i hope can be answered in this forum.
First, let me start off mentioning what i intend to do:
we have three (airport enabled) iMacs sitting in the middle of our office.
At the far end of the office we have the DSL modem, a Gigabit Ethernet Switch, the airport extreme station.
At the other end of the office, I have a HP Color LaserJet (networkable) and a PowerMac G5 1.8GhZ DP (has an airport card installed).
I would like to have the three iMacs connected to the Internet, the Printer and the G5 PowerMac (which will serve as a server). I go about that by connecting the Modem with a jumper cable to the Gigabit switch, as well as the Ethernet cable (regular ONE-WAY) from the printer and the G5 into the Gigabit Switch, I assume. Then I lead one Ethernet Cable from the Gigabit Switch into the airport station, so that an (optional) laptop could access all of teh attached goodies.
Eeventhough the iMacs are airport enabled, I would rather have the option of having them hardwired as well (for speed reasons). I just plug those ethernet cables inside the Gigabit Switch as well?
Thats the technical part.
Now a question about the PowerMac G5. Everyone on the network needs to access files which I will store on the G5, such as photo library and some word and xls documents. Can i just make everything shareable?
Thank you in advance for any suggestions/input you might have.
G5 imac, powermac, etc Mac OS X (10.4.6)It sounds like you have it right - if you're using wired ethernet connections just connect everything back to the switch.
For the base station, make sure it's running in bridge rather than route mode - using AirPort Admin Utility, turn off the 'distribute IP addresses' option.
As for the file sharing, I wouldn't share the entire drive, but designate one folder (or folders) as being shared. If this is running Mac OS X client (vs. Server) get a copy of SharePoints which will make it easy to select which folders are available for sharing.
Unless you're also running as a directory server you'll also need to make sure that the G5 has an account for everyone that is going to log onto it to access the shared folders. You could use one common account, but that's not recommended. -
Cannot send email from outlook 2011 (Mac) on public networks but can send via Mac Mail
I cannot send mail with Outlook from anywhere other than my work or home network, will not work even when accessing 4g with my phone hotspot; very frustrating. I am using Yosemite & Macbook Pro (2012). if i use the Apple Mail everything works fine so I can only assume it is a setting on Outlook?
Update - I now have it working.
am not really sure what exactly fixed it.
I changed a lot of things but my setup now has the following which I think fixed.
outgoing server - p06-smtp.mail.me.com
override default port checked - port now 587
on more options button changed it to "use incoming server info". -
I have BT Total Broadband Anywhere Home Hub 2. I have used it successfully on my desktop pc and wirelessly with my laptop. However I went away for 2 months and was unable to use either (everything was switched off whilst away). On my return the laptop can't connect at all, I just get two grey monitors with a red X and the information 'A Network Cable is unplugged'. I bought a netbook when away and am having the same problem with that now.
On the laptop that worked before, on my Network Connections it is showing as follows:
Local Area Connection 2
Network cable unplugged
Broadcom 440 x 10/100 Integrated Controller
1394 Connection 2
Connected
1394 Net Adapter #2
I have tried connecting to the Hub with an ethernet cable without success and when I run the Hub Manager on the laptop it just says it can't connect with the hub. When I run the Hub Manager on my desktop it says there is no wireless device detected.
A check on the laptops device manager hardware shows everything as working properly, but when I try the Wireless WLAN configuration utility in Control Panel it tells me there are currently no wireless adapters available and enabled.
I am getting desperate as I cannot sit at the desktop for any length of time and need the laptop, please can anyone help?chunkleberry wrote:
I have BT Total Broadband Anywhere Home Hub 2. I have used it successfully on my desktop pc and wirelessly with my laptop. However I went away for 2 months and was unable to use either (everything was switched off whilst away). On my return the laptop can't connect at all, I just get two grey monitors with a red X and the information 'A Network Cable is unplugged'. I bought a netbook when away and am having the same problem with that now.
On the laptop that worked before, on my Network Connections it is showing as follows:
Local Area Connection 2
Network cable unplugged
Broadcom 440 x 10/100 Integrated Controller
1394 Connection 2
Connected
1394 Net Adapter #2
I have tried connecting to the Hub with an ethernet cable without success and when I run the Hub Manager on the laptop it just says it can't connect with the hub. When I run the Hub Manager on my desktop it says there is no wireless device detected.
A check on the laptops device manager hardware shows everything as working properly, but when I try the Wireless WLAN configuration utility in Control Panel it tells me there are currently no wireless adapters available and enabled.
I am getting desperate as I cannot sit at the desktop for any length of time and need the laptop, please can anyone help?
Hi, the devices you have mentioned are the 'wired' connections. On most laptops, there are switched you can press to turn on and off wireless, is it posisble this has been done?
You can check to see if 'wireless network' appears by selecting the Start Button, then click on Control Panel and open, you should see 'Network' (doing this by memory) and open that up, you will see Wired Lan and Wireless Lan.
If Wireless Lan is disabled, you can right click on wireless lan and enable it, that should work.
CG
CG Over An Out -
AIO Remote wont recognize my network printer deskjet 3050
AIO remote app (IOS) did not recognize my network printer (Deskjet 3050), other apps (printer pro lite) did recognize the printer flawlessly, both the printer and the iphone are in the same network, I can print from my PC and my mac but not from AIO remote app (not even recognize the printer).
Can you help me?Hello MrCrysis,
With the Printer Pro Lite app working to printer, this is excellent to hear. Although this is not an HP app. So to explain as to why the AiO Remote app is not recognizing your printer, and not being able to scan. Your printer does not have AirPrint capabilities according to the 'HP Deskjet 3050 (J610) and 3050A (J611) All-in-One Printer Series Product Specifications'. AirPrint is a requirement for the HP AiO Remote app to work, and because the printer does not have AirPrint the app can not see the printer.
Regards .
I worked on behalf of HP -
AIO Remote app cant find HP 3050 printer on my network
Well thats my problem, I tried Fing and it sees the printer, tried ePrint free and it prints like a charm, but AIO does not even see my printer on my network (and yes my printer is in the same network as my mobile device is) I can print from my PC (windows 7) and my MAC (leopard) but I cant print from my iphone 4 using your app. I did the direct connect and it works but I need the network connect instead.
Am I missing something here?
THX for supporting me.Hi MrCrysis,
Your question has been answered on http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/AIO-Remote-wont-reco...
Regards
I worked on behalf of HP -
AIO Remote app cant find HP 7150 aio printer on my wifi network, on Windows Phone 8
HI,
Yesterday I install You App AIO Remote on Windows Phone 8. I have connected to wifi HP 7150 aio printer, but phone cant find this printer... I have Lumia 1520 and Lumia 920 smartphones both is connect to this same wifi network like printer, but You app on both Lumias cant find printer, again but no problem is to connect to printer WEB interface from this both Lumias, so wifi network is correct configured.
I have two tablet more in this same wifi network, both with windows 8.1 x64 systems, on this, You Windows 8 modern App AIO Remote find this same printer without problem...
So what is wrong ? printer config ? eprint is on, ipp is on, bonjur is on, ip is static.
Please help Me becease I wait for this app and now i cant use them
Thanx
PeterHi Peter,
Welcome to the HP Support Forums. I understand that you are trying to use the new HP AiO Remote app for Windows phones to print to your Photosmart 7150 printer.
The Photosmart 7150 printer only supports USB connectivity, I have include the Photosmart 7150 Printer Specifications for reference. To be able to use the HP AiO Remote app the printer needs to be connected to a wireless network.
If you accidentally typed the incorrect printer model, please let me know which make/model/product number of HP printer that you have. How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP -
Google Play on Tablet works on WIFI not Verizon network.
I have an Motorola Ellipsis Tablet. I am unable to use Google Player. When I open the app, I get "Background data disable. Google play store needs background data to be enabled." I hit enable and It asks me to choose either Facebook or Gmail. I choose my email account and it tries to sync and I get the message "Sync is currently experiencing problems. It will be back shortly." Everything works fine when I am on WIFI at home but when I get to work and I'm on the Verizon network it won't work. I can't use Pandora or look at video. Can someone help me figure out why it is not working on the Verizon network? Thanks.
Hi Mollie88,
Oh my! Let's get you back to enjoying your device. Some applications depend upon background data (transferring data when not directly in use). Restricting background data may cause those apps to stop functioning unless a Wi-Fi connection is available. To uncheck Restrict background data in the Google Play application, follow the directions in the link http://vz.to/1f5KM7b .
Thanks,
PamelaF_VZW
Tweet us @vzwsupport -
X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64
Hello,
After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
How can I proceed?
Thank you in advance
Solved!
Go to Solution.I fixed it by downloading this drivers:
https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
And after installing them and restarting, searching for them manually from the Device Manager.
Cheers -
IPad iOS 8.1 Mail constant network use draining battery
Since updating to iOS 8.1, iPad Mail is rapidly draining my battery. When I go into Mail the network usage indicator (spinning wheel) runs constantly. I left it this way by mistake while traveling and it drained the whole battery with minimal actual usage in one day -- I usually only have to recharge every 2-3 days.
I have checked the battery usage indicator in Settings and it shows that in the last 24 hours Mail used 54% of the battery. I had changed no settings, but went into Mail & Calendar settings and double-checked them, and they were as they had always been. I have three email accounts: Gmail, Verizon, and a company account on an Exchange server. It's the only one that was set to Push, but now I've set it to Fetch like the others and it still continuously accesses the network when I'm in Mail.
This must be a bug of some kind introduced by a recent OS or app update, right? This never happened before, and nothing else has changed in my usage of the iPad or Mail.
One other issue: Mail is not actually fetching new mail when it should. I see new mail show up on Mac Mail hours before it appears on the iPad. Normally email would arrive almost simultaneously on my iPhone and iPad, then a moment later on the Mac. Now the phone is still first, but the iPad lags. The only way I can get the iPad to refresh in real time is to close the app and restart it.
Is anyone else seeing this behavior with the recent update? Any idea how to fix it?Found a solution at: http://webcamsocialshopper.com/iphone-battery-suddenly-draining-try-this-non-res tore-method
Short version, remove your Exchange account, shut down phone, restart, add the Exchange account back. Problem solved. -
ASA 5505 VPN clients can't ping router or other clients on network
I have a ASA5505 and it has a vpn set up. The VPN user connects using the Cisco VPN client. They can connect fine (the get an ip address from the ASA), but they can't ping the asa or any clients on the network. Here is the running config:
Result of the command: "show running-config"
: Saved
ASA Version 7.2(4)
hostname ASA
domain-name default.domain.invalid
enable password kdnFT44SJ1UFX5Us encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 10.0.0.4 Server
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone MST -7
clock summer-time MDT recurring
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list vpn_splitTunnelAcl standard permit any
access-list inside_nat0_outbound extended permit ip any 10.0.0.192 255.255.255.192
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPNpool 10.0.0.220-10.0.0.240 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface smtp Server smtp netmask 255.255.255.255
static (inside,outside) tcp interface pop3 Server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface www Server www netmask 255.255.255.255
static (inside,outside) tcp interface https Server https netmask 255.255.255.255
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable 480
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
group-policy vpn internal
group-policy vpn attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn_splitTunnelAcl
username admin password wwYXKJulWcFrrhXN encrypted privilege 15
username VPNuser password fRPIQoKPyxym36g7 encrypted privilege 15
username VPNuser attributes
vpn-group-policy vpn
tunnel-group vpn type ipsec-ra
tunnel-group vpn general-attributes
address-pool VPNpool
default-group-policy vpn
tunnel-group vpn ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
service-policy global_policy global
prompt hostname context
Cryptochecksum:df7d1e4f34ee0e155cebe86465f367f5
: end
Any ideas what I need to add to get the vpn client to be able to ping the router and clients?
Thanks.I tried that and it didn't work. As for upgrading the ASA version, I'd like to but this is an old router and I don't have a support contract with Cisco anymore, so I can't access the latest firmware.
here is the runnign config again:
Result of the command: "show startup-config"
: Saved
: Written by enable_15 at 01:48:37.789 MDT Wed Jun 20 2012
ASA Version 7.2(4)
hostname ASA
domain-name default.domain.invalid
enable password kdnFT44SJ1UFX5Us encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
name 10.0.0.4 Server
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
ip address dhcp setroute
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
ftp mode passive
clock timezone MST -7
clock summer-time MDT recurring
dns domain-lookup inside
dns domain-lookup outside
dns server-group DefaultDNS
domain-name default.domain.invalid
access-list vpn_splitTunnelAcl standard permit any
access-list inside_nat0_outbound extended permit ip any 10.0.0.192 255.255.255.192
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool VPNpool 10.0.0.220-10.0.0.240 mask 255.255.255.0
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-524.bin
asdm location Server 255.255.255.255 inside
no asdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list inside_nat0_outbound
nat (inside) 1 0.0.0.0 0.0.0.0
static (inside,outside) tcp interface smtp Server smtp netmask 255.255.255.255
static (inside,outside) tcp interface pop3 Server pop3 netmask 255.255.255.255
static (inside,outside) tcp interface www Server www netmask 255.255.255.255
static (inside,outside) tcp interface https Server https netmask 255.255.255.255
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
http server enable 480
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map outside_dyn_map 20 set pfs group1
crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA
crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map
crypto map outside_map interface outside
crypto isakmp enable outside
crypto isakmp policy 10
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
dhcpd auto_config outside
group-policy vpn internal
group-policy vpn attributes
vpn-tunnel-protocol IPSec
split-tunnel-policy tunnelspecified
split-tunnel-network-list value vpn_splitTunnelAcl
username admin password wwYXKJulWcFrrhXN encrypted privilege 15
username VPNuser password fRPIQoKPyxym36g7 encrypted privilege 15
username VPNuser attributes
vpn-group-policy vpn
tunnel-group vpn type ipsec-ra
tunnel-group vpn general-attributes
address-pool VPNpool
default-group-policy vpn
tunnel-group vpn ipsec-attributes
pre-shared-key *
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect icmp
service-policy global_policy global
prompt hostname context
Cryptochecksum:78864f4099f215f4ebdd710051bdb493
Maybe you are looking for
-
Hello, To delete a user's PAB, it can be done using the Admin Console. To delete 50,000 users PAB, i think it is inefficient to use Admin Console. Is there any available command line to do it? the servers we're using are: NDS 4.12 IMS 5.0 P2 Thanks!
-
I am woking on small project, on which i am to convert data from SQL Server to Oracle. I am using Oracle Data Integrator. Can any body tell me the steps for it to do ? what i have done uptil now is that i have created master and work repsitories, now
-
Reports in portlet region (Portal)
Hello! I have a report that have a link to another report and is integrated to Portal, but when the second report is called it was displayed in all the page and i want that is displayed in the portlet region, what i have to do to display the second r
-
Suggest improvements for nokia n73 and other devic...
Nokia n73 is the most succsesful device ever made by nokia. But you noticed that the images taken by the n73 are little blury and the video is also poor. If theres is nothing harware problem why not nokia fix theme with software update. Why not nokia
-
Hi, Can anybody provide me the information on how testing of Variant Configuration can be done?