S820 problem in playing songs in car audio using aux

Hi
When try to connect my s820 phone to car audio through aux cable its giving very low volume and noisy (buzzz). Can. Somebody help in resolving it? When I connect same to my motog its perfect. I am having Sony explode car audio system with aux (no Bluetooth).

Hi
Can someone help me out how solve this problem?

Similar Messages

Problems with playing songs in iTunes

as the subject says. I have som problems with playing songs. not everyone just a some..
If we take for example that a song is 8min. then at 1.40 it just stops and goes to the next one. I can jump over it with pressing in the middle for example. it plays. as normal. UNTIL. 3 mins. then the same problems appear. I don't really understand how. just between 1.40-1.50 iTunes thinks that the song is finished. I know my english isn't so good but cuz there is no swedish support. I have to write here. any answers would be good

I'm having a similar problem.
Every now and then, a track from a ripped CD or from iTunes or from eMusic will "look" OK in iTunes (or on my iPod), but when the track plays, it gets partially through and it jumps to the next track in the playlist.
For example, if playback of track 1 pauses and jumps to track 2 at 1:30 into playback of track 1, & I click on 1:31 or later in track 1, the rest of track 1 will play fine. But if the playback of track 1 starts at the before the "skip point," the track will stop & iTunes (or iPod) goes on to the next track in the playlist. If I locate the file (on my external drive) and play it in the finder, there's always buzzing sound at the point where the iTunes jumps to the next track.
For ripped CD's this is not a huge deal, I just re-rip & usually all is well. With eMusic, I can download again, but with iTunes, I have to file a complaint & so far they've just credited my account, which is OK, but time consuming.
At first I thought the problem was with my optical drive, but then the problem started happening with downloads from iTunes and eMusic as well. NONE of these shenanigans happened before I upgraded to iTunes 7.6, so I'm wondering if that's where the problem is. One thing's for sure: I'm not going to "jump" at the next upgrade of iTunes!
I'm totally stumped & bummed. iTunes used to be a really good friend, now I find myself wondering if I should bother with putting my entire CD collection on iTunes if it's no longer as reliable as it used to be.

Ipod cutting off songs. itunes plays songs just fine. not using "match."

ipod cutting off songs. itunes plays songs just fine. not using "match."
reformatted ipod, resynced, same problem.
help!

I have also had the same problem...
The songs appear to be random, and when I plug my iPod into the computer it is fixed. Sure enough, a monthish later, it happens again.
When my songs get cut off, they are stopped exactly half-way through. Apparently, the iPod thinks that is how long they are, because it plays the time that it shows (the total time only goes to helf of what it normally is).
This does not seem to be a matter of old software, as I am always up-to-date on iPod software, and this has been happening to me with version 1.4.1
I have not Restored my iPod, but apparently that will not help (according to the other posts).
I hope somebody can answer this (although I've posted it twice before with no luck, so...)

Iphone 6 iOS 8.1 no longer playing properly with car audio system

Hi there,
I have an iphone 6 running ios 8.1 and it is no longer allowing me to play/pause songs through the car's audio system. I have a USB port in the car that allows me to plug my iphone in and control the Music through the car audio system.
I have a 2011 Holden Cruze.
Prior to the iOS upgrade, the function worked fine.
Bluetooth connectivity is still OK and if I control the music via the iPhone it will play.
Is anyone else having this issue and are apple aware of it?
Thanks.

Hi Darren,
I'm experiencing the exact same issue with my Volkswagen Golf 2015. Since the update I'm unable to use the play/pause button. When I press the button while my phone is connected through the MDI cable it does nothing. But if I use Bluetooth I can control it without issue. That said, in my car I don't want to use Bluetooth while I'm playing music because I want to charge my iPhone at the same time so I need to use the cable. I think this is a really issue and Apple should advise.
Update:
I did a full restore without using a backup of my old phone. Oh surprise... It seems to work now. But the worst now, is that I have this album of U2 showing in my playlist. I don't know if it's related, but that album was not showing when I used my back-up the first time. Seriously, I think Apple succeed at messing up enough with iOS 8.1 and this U2 album to break the playlist and the playback functionality with cars and radios.
To resolve the issue I tried:
Restore to iOS 8.1 with back-up - FAILED
Restore to iOS 8.1 without using any back-up - SUCCEED but fail at the same time because I need to re-setup my iPhone manually and try to get rid of this U2 album.

I have transferred all my music from iTunes onto my USB to play on my car audio radio. The radio reads the music but does not play it in sequence. There is a specific way to save the music into folders and name them. I have a Pioneer DEH-2350UBSW.

I have transferred all my music from iTunes onto my USB to play on my car radio. The radio reads the music but does not play it in sequence. So it plays certain folders, then it skips folders. in certain folders it skips tracks. apparently there is a specific way to save the music into folders onto the USB with regard to naming the tracks and folders.. I have a Pioneer DEH-2350UBSW. Can anyone please help.

It is a stick, Cruzer Blade 16gig.
In the manual it says the following about the USB storage device:
1. Playable folder hierarchy is up to 8 tiers
2. Playable folders up to 500
3. Playable files up to 15 000
Under sequence of audio files it says that the user cannot assign folder numbers and specify playback sequences with this unit. It also gives an example of a hierarchy:
01 - folder
Under that is 02 which is also a folder
Under that are compressed audio files 01 to 05: folder number
Under that there is another folder same concept as above - I have attached that part of the manual in this response.
I named my folder - Folder 001 Artists name and then in that folder I added the tracks as:
001 Song title
002 song title
It played the 1st song in the folder and skipped to the next folder, I can't even locate the other tracks.
On another folder I saved 31 songs but only 29 played so I am not sure whether there is a limit.
All I need is an example of how to number and name everything.

Why can't I play songs on my iPod using iTunes?

This is probably a simply question and one asked many times. When I attach my iPod, iTunes starts, however, when I click on my iPod icon and Music, all of the songs are 'greyed out' and I'm unable to play them. Is this the norm? and, if not, what can be done to enable playback? Thanks for your help.
Paul

i have a similar problem which i need all your help! just bought a new classic to replace my nano. i have so far loaded approx 3000 songs on to it without a problem, but the songs won't play on the computer - they all show up in the library and any new cd's that i copy are all shown in the library and copy to the ipod and play ok, it's just that none of the songs will play on the computer, when i click on them an explanation mark appeard on the left of the song and a pop up tells me that "song couldnt play because original file couldnot be found, would i like to locate it" - course i would but i can't!! i'm a complete novice at all this and would appreciate any help from you experts.

Playing music in car and using phone

Sorry if this thread exists, I was not able to find it
Currently using AUX for iphone music playback in my car but have to unplug it when using the phone.
What's the best way for me to be able to play music in the car and be able to use the phone without having to unplug it everytime?
If I get a BT headset can I plug iphone to AUX and llisten to music and answer a call?
so confused....

Michael, i've heard different experiences with this. The bluetooth idea may work or may not. That just depends on whether the iPhone still recognizes your AUX line as the "headphones". In that case, it won't work.
See if you have a friend with bluetooth earpiece that you can borrow and try this out.
Perhaps some 3rd party company like Belkin or someone else will come up with a solution to this. Only time will tell. And the iPhone economy will grow exponentially

Problem in playing songs in order - First Generation shuffle

I've been having a problem over the past few months, when trying to play my songs in order on my ipod shuffle (first generation). When I do, it suddenly stops in a song and freezes (also flashes green on and off). I switch it off and restart it, but the same problem occurs. I've tried the 5 R's and lost count the amount of times I've had to restore it.
Anyone have any suggestions as to what the problem could be?
Sal, Scotland

This was not the first site I encounered in my first two hours of searching . . . the other sites said that I could do this and that but did not provide the links to actual instructions.
When connected .. the Shuffle appeared as an icon on the desktop, and two itunes windows were launched.
I could not disconnect in a manner that satisfied the MAC even after ejecting from all three places. However, after connecting and disconnecting about 20 times, setting up an Apple ID 3 or 4 times, and randomly clicking various parts of the itunes windows for a few hours, I finally was able to delete and reload songs and actually have the Shuffle play more than two. I can now forward to more than one song at a time.
Hopefully, my instructions above will assist future Shuffle users or at least make than feel better in their random quest for useability. BTW - I did find a teeny tiny manual with lots of redundancies. After much squinting, I ascertained that this manual instructed me to click things that I did not have visible on the screen so it was not useful.

IPhone 6 doesn' consistantly play on Alpine Car Audio.

I have an Alpine ida-X100 Mp3/iPod player in my car that connects via USB / 30-pin to any iPod or iPhone. (IT DOES NOT USE THE HEADPHONE JACK< JUST THE CHARGING PORT. I have had this player for several years and it has worked on every iPhone I have had. When the iPhone went to the lightning connector, I simply bought a lightning adapter for the 30-pin. Even after I bought the iPhone 6 (using ios8.3) it played. But just recently I get an error message on my phone saying "this device may not be compatible with iPhone", or something like that. and it will not play music. I have tried resetting the phone, resetting my Alpine player, closing all the other apps, and even playing the music directly on my phone instead of through the Alpine.
I thought his might be a bad cable, but have bought new cables, and a new lightning / 30-pin adapter, and got no results. The reason I thought it was the cable is because it still does sometimes play.. I plug it in when I get in the car, and I have about a 30% chance of it starting to play. When it does play, I tried wiggling the cable to see if it would cut off.. but it keeps playing.
Is there a bug or a glitch on the last few updates of ios8? This problem occured when I got a 8.x version of ios8. So it did not happen when I first got the iphone 6.
Being that it sometimes plays leads me to believe there's something on the phone that prevents it from connecting to the player, and that something is turned off not working when it does play.
I've checked with Alpine and have gotten nothing.
Can anyone help? Is anyone else experiencing this that plugs their iPhone into their car stereo?

Hello there, Dominic.
The following Knowledge Base article offers up some great steps for troubleshooting the issue with bluetooth pairing to your car:
If you can’t use a Bluetooth accessory or car kit
http://support.apple.com/kb/HT6473
To resolve the issue, you'll need to first sign in to iCloud and review your devices:
Sign in to iCloud on your iOS devices.
On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8.
Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
Then, remove any inactive devices from iCloud:
Sign in to iCloud.com.
Select Find My iPhone.
Select any devices that aren't active anymore.
Wait for Find My iPhone to stop trying to find the inactive device.
You should see the option to remove this device from your account. Select it to remove the device.
After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Problem with Music for an Car Audio System

Hello,
first I want to apologize for my bad english, because i come from Germany
I have a Problem with my MacBook Pro 2011 and the file transfer (music) on a USB stick.
Whenever I copy music on a USB, everything is copied twice and the second File is copied with an "." previously.
My car detects the files as broken.
Can anybody help me pls???

First try creating a folder or folders to put the music in. Drag the folder to the USB.
See if this helps.
The "." means a hidden file. Does you no good.

[Solved] Problem with playing a certain .mkv movie (using mplayer)

Firstly, I have no idea about whether this is a issue of mplayer itself or the enviroment it's being run in but I'll try here first
I got this movie that has a few points in it (always the same) where the player just stops playing the video, when I ran the player in terminal it says End Of File is reached. If I skip over such point I can keep on watching... ..until it happens again in about an 45 mins or so.
after that I tried mplayer2 with similar results, only this time it says: "MPlayer interrupted by signal 11 in module: flip_page"
Of course I googled this and it seems a few people have had similar problems but I've found 0 actual solutions to this. It leads me to think that either I'm just doing something wrong and I should have configured something somewhere or this is just a very rare problem. So which one is it? Is there anybody here who could tell me what causes this and how to fix it?
(by the way MPC-HC in win7 plays the video just fine)
Last edited by Rayniac (2011-09-15 16:30:15)

Mr.Elendig wrote:Build mplayer with debug symbols, get traces, report to mplayer devs
That would seem to be the only thing to do here as I found that dragon player works with that vid flawlessly. That means it's the players fault then...

Upgraded to 8.02, many songs in library won't play: "Song could not be used

A few days ago, I took the 8.02.20 update to iTUNES on my PC with Windows XP, I have latest service pack, yada yada.
After the iTunes upgrade, I noticed that many of my songs in my itunes library won't play when I click on them.
I get the icon of the exclamation point in a circle to the left of the song name, and the message says:
"song XXX could not be used because the original file could not be found." Would you like to locate it?"
I never moved any of my songs, and the songs that it says could not be found ARE indeed on my computer, and I can use the Windows file explorer to find the song and play it.
Back to iTunes, I decide to answer yes to the error, and "find the song" by manually meandering over to the song through the file browser window which iTunes pops up, I get to the file, and it then plays in iTunes.
My question is, how did iTunes "forget" where the songs are, and why did it forget most of them, but yet leave many others ok. I never moved nay files or anything.
Is there a way to make it recompile the library?

Probably not every one, but you will have to do it several times. Right click on the name of the song, show in window's explorer and when it can't it should give you a dialogue to find the song.
Once it finds one it'll offer to find more and you can locate stuff that way.

Hands-Free Car Options using AUX connection

Looking at hands-free car options for my wife's iPhone 4s. She has a Honda Civic with AUX jack to the stereo system.
So far, tested two locally available systems:
Belkin AirCast Bluetooth - connecting via Aux jack:
http://store.apple.com/ca/product/H2652VC/A/belkin-aircast-bluetooth-in-car-adap ter
She liked the sound quality through the car stereo, and the option to playback music also, but found the BT control finicky and prone to disconnection/unpairing (guess you need to practice) More particularly, she doesn't like the fact that the stereo need to be set to AUX mode to hear a call coming through. She had the notion that one can be listening to the radio or a CD and the system will automatically interrupt when a call comes in. I explained that whether BT or wired, all of these AUX input systems (to my knowledge) have that limitation.
So I looked at a separate phone speaker option:
Monster Mobile AirTalk Bluetooth Car:
http://www.monstercable.com/productdisplay.asp?pin=6037
I was quite impressed. Simple to use. BT connection very stable and easily re-established when getting in the car. Fairly good sound quality with adequate volume, considering the size of the speaker (just a little background hiss), but she finds it too tinny.
So, back to the car stereo speaker option. Are there any hands free sets (BT or wired) that will automatically switch to AUX mode, or otherwise allow a received or made call to be heard through the car speakers when it is in another (CD, Radio AM/FM) mode? Or else is there some sort of auto-switching AUX adapter that can be used?
Cheers.

I think I see why the first link 'HD Accessories' pulled their link.
The Lux does not seem to work with the iPhone 3G even though the first link said it was compatible.
The second link now seems to have removed the iPhone 3G from the list.
I would guess this has to do with the charging pin from the now obsolete firewire pin for charging.
Looking forward to see what you find Wheelman....
Joseph Kriz

Audio cuts out at random while playing songs in itunes

While playing songs in itunes audio will frequently drop out completely across the entire system. The song will still be in play mode but the track progress indicator doesn't move. There's no slowdown or spinning beachballs, activity monitor doesn't indicate any processes hogging resources, and there are no other noticeable effects other than zero audio output. The problem resolves temporarily if I pause itunes then click the volume up/down keys and click play again. Any clue as to how I might resolve this annoying issue?

Hi. What OS X release? (10.x.?) iTunes? On this G4 1,25 single now connected I got 10.4.11 and iTunes 7.0.2 Works fine.
Rob

Certain .AVI files will not play audio using QuickTime 7.5

I have recently updated my QuickTime to QuickTime Pro 7.5. I attempted to play videos in my library and noticed that certain videos will not play the audio, but video is fine. I did not have problems with playing the videos with audio before the update.
I tried to do some research and many have suggested to install PERIAN 1.1. I have done this, but still no result. I have deleted a lot of important videos, because I assumed that they are no longer usable. I decided to keep most of them and figure out a solution. No luck so far.
Please help! Anyone else experiencing this problem?

I'm not really sure what to look for in QT's Movie Inspector, but here's what it says:
Format: Apple OpenDML JPEG, 320 x 240, Millions
FPS: 14.99
Playing FPS: (Available while playing.)
Data Size: 11.96 MB
Data Rate: 2112.38 kbits/s
Current Time: 0:00:00:13.94
Duration: 0:00:00:47.50
Normal Size: 320 x 240 pixels
Current Size: 320 x 240 pixels (Actual)
If Pro update were not suited for Intel Mac's, should I uninstall the update? If so, how do I do this? Do you have any other suggestions?
Thanks again for the reply!

S820 problem in playing songs in car audio using aux

Similar Messages

Maybe you are looking for