S860 and X2, Google not connecting on mobile network.
I live in Sweden. Had my S860 for 3 years and it has been working fine but some months ago it was not connecting on mobile network with crome and play store. Restart and it could work for some time the it was gone again. At the same time Hotspot, skype and OS update is working fine. Got a new sim card i november but it did not help. This was going more and more bad and finally it did not work at all. Tried to reverse OS a few steps back and still not working. So i tought that it was something to do with hardware. Now i bought a Vibe X2. Away from sweden for the moment (Saudi Arabia) but this one does the same when I try to connect. OS update working but Crome says ssl error and Play Store just wont connect. Saw some forums said it might be time and date that was wrong so i tried to change to local format but it was the same. My S860 i was waiting for 6 month before i could buy it (not for sale in Sweden) in Saudi. Haas been very pleased with it so now when it has been messing with me i had no problem to buy a new Lenovo phone. This time just waiting 3 month before i could buy it in Saudi. Hope this is something I can get some help to solve. /Nils
Hi Ragge
Can you tell me your firmware build number(for the S820 and Vibe x2) and Baseband version(for the S820)?Settings->About phone....
''Had my S860 for 3 years and it has been working fine.....Sorry, checked and it is a S820 i have.''
The S820 has been relesed in May 2013.
''Tried to reverse OS a few steps back...''
How did you do that?.
Can you install THIS ->Open the app->MTK Settings->Telephony/BandMode->SIM 1(Do the same for SIM2) and make a screenshot(Power&Volume-) ->post the screenshot here.Thanks
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Similar Messages
-
Suddenly my I phone 4 will not connect message mobile device service could not be started (nothing has changed on my PC). I have tried following the troubleshooting and have restarted the mobile device) but it still won't connect. Also all bookmarks have disappeared!
Okay ... it's a better bet with a 1067 error message when trying to start the Apple Mobile Device Service, but we'd better check for a LSP issue, as per the following document:
Apple software on Windows: May see performance issues and blank iTunes Store -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone. -
I have a ipad 2 and it does not connect with safari using 3G
I have a ipad 2 and it does not connect with safari using 3G
Sorry to hear you are having issues, but there are 2 ways you can print from that device.
The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping! -
My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.
Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem. Windstream tech service is useless. i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help! windstream said everything is working on their end, yea right. What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products.
these are brand new machines with lion.
This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great. Please help before my wife losses it
thanksThere is a 2701HG-B, and a 2701HG-D. If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
By the way tell your wife it isn't that bad. At least you have an ethernet DSL modem. There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access. At least now only the craziest DSL providers still use those modems. -
turned off my desktop mac, now both my mouse and keyboard are not connected. i am not logged in yet as well, dont know what to do ?
Try resetting the SMC (no peripherals required).
Barry -
I just got an iPhone 4s, and I can not connect it with my iTunes from my previous account. I have already tried making another account, however it says that I have the wrong security code even though this is not true. What should I do?
Contact iTunes support. There's a link to it on the bottom of every page in the iTunes store.
-
Yes, my cousins iPod is disabled. It says "ipod is disabled, connect to iTunes", I did that and it will not connect to iTunes, because it needs the pass code. The pass code key board will not show up and I cant connect. Please help me figure this problem out, my cousin is depending on me. Thanks, a concern customer.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
After updating to iOS 6, I can no longer connect to my schools wireless network. It uses manual http proxy. Now however a blank pop up comes up and it will not connect you. Thanks
Turn off your firewall and antivirus software.
-
I have an iPhone 4s, but wifi the option is greyed out. The wifi stopped working on it months ago. Now I wanted to erase all content and setting from my old 4s and it will not connect to the internet, because the cellular data is no longer connected, since I bought a new iPhone 5c. I can't erase my phone by pluggin it into my Macbook Pro, since I can't disable the "Find my iPhone" App without internet. How do I erase all the data and setting on my 4s without connecting to the internet? It is running ios 7
See this https://answers.yahoo.com/question/index?qid=20131119125513AAtRloc
I just did it. To enter DFU mode, I had to use "method 3" on this post
http://thebigboss.org/guides-iphone-ipod-ipad/dfu-mode
Too bad my 4S is 2 years old. Wifi is dead. I had to upgrade to 5S, but 5S is soooooo much faster than 4S so it's kind of good outcome. Without the 4S breaking down, a stingy person like me would have never upgraded the phone. -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates. -
I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.
Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system. -
Setting up my brand new MacBook Pro and it will not connect to the wifi network. Nothing wrong with the network which is happily working for my iPhone and iPad! Suggestions accepted for making this connection.
Fixing this is a two step process:
1) System preferences > WiFi/Airport ...
... check [√] Ask to join new networks
"Known networks will be joined automatically.
If no known networks are available, you will
be asked before joining a new network."
2) Remove unwanted networks from the list of "known" networks under
System preferences > WiFi/Airport > (Advanced) > | Airport/WiFi pane ...
Close the window and save changes. If no joy, do a restart to ensure you are playing under the new rules. -
Why does my Airport Express say "self assigned IP address"? No IP address for the ethernet, and it is not connecting to my cable router any longer...
Some cable providers.....like mine, a well known company......seem to take anywhere from a few moments to sometimes up to 30 minutes to allow their equipment back at the cable company to fully reset and issue a new fresh connection.
So, it would not hurt to leave things powered down for 15-20 minutes or more when you perform the reset that John Galt suggests. -
I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating meyou have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more.
Maybe you are looking for
-
How to fix loop value of column in crosstab BI publisher report ?
Hi all, I have a RTF template of crosstab report.I facing the problem: Some value of each column is loop for each row. EX: I have data: row1,co1(1000), col2(0),row2,col1(2000),col2(500).Then value of col1 loop from row1 and row2. Please help me!It's
-
EPrint and Network Problems Photosmart All-In-One D110 Series
Hello, Any help would be extremely appreciated as I have spent several days trying to figure this out with not much prevail! My product installation said installed properly. Blue wireless light is on in front of printer. Shows onine and ready in p
-
Error Submitting New App Version in iTunes Connect
Anyone else running into issues submitting a new version of an existing iPhone app to iTunes Connect? Trying to save a new version and new binary for submission results in the following error message: There are one or more errors on the page. Scrolli
-
I can;t seem to open a boo k to read
-
Problem printing more than one picture in Elements 12
I am running Photoshop Elements 12 on a MAC Powerbook Pro with OSX 10.9.1. I can only print our one picture at a time, then have to close Element 12 and restart to print another one. What is wrong?