S920 Android 4.4.2 USB computer connection failed

Hi everyone,
I have been asking around with friends, forums and even google in regard to my issue.
*Issue : When connected to computer via USB connection, it'll only charge my phone rather than giving me options to access my files in my phone, regardless into my external or internal memory. It happened after I upgraded my phone to Android Kit Kat 4.4.2
*Troublehooting performed: I've changed my USB cable, changed to other USB port on my computer, tested on other computers, reboot phone. Checked in Settings > Storage (under DEVICE tab) > USB computer connection (under Option). The "USB computer connection" is greyed out
Does anyone in here experienced this before? Any solutions found?
URGENT!!!

I bought my lenovo s920 in china last year of may...since then i downloaded some apps from lenovo store...after a month ive noticed i dont hav google playstore..so i checked and my firmware doesnt support google..my model is s920 and only support s920-_ROW..How can i hav google playstore?...and also after upgrading my phone into new version my home key doesnt work and notification doesnt appear...pls help..thnks..

Similar Messages

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode

My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset passowrd, authorized computer, & repaired itunes when reinstalled. Any suggestions on how to successfully connect?

Using USB to connect to itunes with iphone. Getting error OXE8000084 with pulsating tone. Have reset password, authorized computer, & repaired itunes when reinstalled it. Any suggestions on how to successfully connect to itunes and what this error message means? Thanks

0X is a Windows Error. Take the time to look over on the right under the "More Like This" and look for ones that have the green checkmark as being solved. You should find answers there.

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

I reset all the settings last night, now I cant get any icons up, plus I'm on a local computer that cant download itunes, anyone know how i can get my screen back to normal? All it shows is the itunes sybol with the usb cord connecting to it.

Your only option at this point is to connect the device to a computer running iTunes so you can restore it.
B-rock

How do I switch my phone to transfer mode when USB is connected to my computer?

How do I switch my phone to transfer mode when USB is connected to my computer?

you should get a notification at the top of the screen for a usb connection. pull it down & select mass storage.
in my computer or windows explorer, you'll see motorola as the next available drive after the hard drive, cd, dvd, etc.
click to open & the sd card can be viewed.

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work

I plugged my usb cable connected with my iphone 4 to the computer, and then it shows up as Iphone, but there is no button to sync, and when i manually drag the files into the storage it would say "Device is no longer responding" and it just would not work... Please help me and quick

You need to check out the User Guide here: http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

How do I send pictures from my android Incredible 2 to my computer?

How do I send pictures from my android Incredible 2 to my computer?

Easiest way for me is to connect my phone to my computer via the USB cable and 'drag and drop' files. You also could remove the SD card (assuming you have one with the files stored on it) and insert it into a card reader attached to your computer.

HT201263 My phone is stuck on insert usb cable connect to itunes screen. this happened during my iOS 7 update.

I was updating my iPhone 4S to the iOS 7 system. During update my phone froze. It's stuck on insert USB cable connect to itunes screen. I've already tried turning my phone off holding Home key while inserting my cord into phone and nothing worked. I've tried DFU mode and that wont work either. What the heck do I do now? So annoyed with this.

I've also restarted my computer and still nothing.

Can't access a USB Drive connected to Time Capsule from a Windows PC. Apple Care can't/won't assist. HELP!!!

Trying to get my Windows 7 PC to access the USB Drive that is connected to my Time Capsule. I have a Fat32 Formatted USB drive connected to a 2TB Time Capsule and I'm trying to get access to that drive from a Windows 7 PC. I've attempted to map the network drive (based on some 3-4 year old articles I could find online) but any time I access a file from the PC, the Time Capsule "freaks out" and disconnects all connections to it which forces me to unplug it to restart the Tim Capsule. I'm at a loss now as to what to do.
Spent a few hours talking to Apple about this and much more. Apple Care can't or won't help with this particular problem (the guy I talked to, as nice and helpful as he wanted to be, had no experience supporting their hardware in a Windows environment).
Someone has to know how to fix this so, PLEASE, help if you can!

First off, Archon23, what you want to achieve is possible. I have access to both my Time Capsule (TC) and the USB drive connected to it, from a Win. 7 and Win. XP machine.
Here is what I see from the Windows side of things:
     From My Computer - TC USB Drive (Y)
     From Windows HomeNet - Time Capsule:
Now getting there is the trick.
One caveat before proceeding: I am not well versed in Windows Networks, Windows Sharing and Firewall settings so some of the following may not be elegant, may not be absolutely required, and may not be the best way of getting there. But it is what I did to see both the TC drive and it's attached USB drive on the Windows side of my network..
1.) First, I added Airport Utility to the Inbound rules of Win 7 Firewall
While poking around my Network Sharing and Firewall settings trying to figure this out, I got a Pop-up recommending I do that. AND I did that. Oh, and while you are at it, make sure you have a Home network established.
2.) Next, on a hunch, I installed a USB Wi-Fi Adapter (under $20) to my Win PC, enabled that Wi-Fi connection and disabled my Ethernet connection. I was getting no where on this matter with my Ethernet connection to a DSL Gateway. But with a Wi-Fi connection to my AirPort Express Base Station, I made progress.
3.) Finally, while poking around my Network Sharing Center some more, one by one I started the various network device Setup Wizards in there, and Trouble Shooters, to find the elusive TC/USB devices in question...AND voila, it worked.   And it's stable, been this way for going on two weeks now.
Good luck.

Can't Delete Files on USB Drive Connected to Airport Extreme

I'm trying to delete some files on a USB drive connected to my Airport Extreme, but I keep getting a error message that I don't have sufficient privileges to do so. I've tried super deletion applications like FileXaminer, without any success. What other methods are there?

Thanks for the info.
Were you using the drive for Time Machine backups, by chance? Time Machine backups are stored in a different format when the disk is connected directly to a computer. So, you won't be able to continue to use the old backups when the drive location is changed.
You might want to check the drive by connecting directly to your Mac and running Disk Utility to "Verify Disk" and "Repair Disk" if indicated.
Even if the drive has it's own power supply, a powered USB hub is usually needed on the AirPort Extreme because the power at the USB port is quite limited.
Message was edited by: Bob Timmons

Printing to USB printer connected to old iMac over Network

I have old Rev B iMac running OS 9 upstairs in the office, this has a USB printer connected to it.
Downstairs I have a Mac Mini running OS 10.3.9
Both these machines are networked together via a router. This all seems to work fine, I can see the drives of both computers from either computer.
My problem though is printing. I want to be able to print from the Mac Mini to the printer attached to the old iMac. I've done all the USB printer sharing business on the OS 9 iMac, but it still doesn't appear in the printer options on the Mac Mini.
Is this possible to do? .....looking through the help topics on my Mac Mini, there was several mentions of printing from OS9 to a printer connected to an OSX machine. But I haven't found any mention of being able to go the other way.

There is a way to do this, but it isn't easy. The grim details are:
1. set up the iMac running OS 9 as a print server using the free utility Print66
2. set up printing from the Mac running 10.3.9 in the Printer Setup Utility, choosing IP Printing using the LPR protocol, to the IP address of the iMac. Additional hurdle - you will need to use the third-party printer driver GimpPrint if you are using anything but a Postscript language laser printer on the iMac.
This will work, but unfortunately it is not an exercise for the beginner.
Incidentally, doing it the other way around is considerably easier (printer connected to and shared by the Mac mini running OS X). See Printing to a Mac OS X shared printer from Mac OS 9 via LPD/LPR

I recently bought an external hard drive and attached it to a wireless modem router. The problem is that i can't access it from my macbook. I get a "connection failed" and "the server is available on your computer. Access the volumes and files locally".

Well I believe I described the problem above. I want only to add that the external hard drive is a Seagate FreeAgent GoFlex Drive 1TB and the wireless modem router is a Belkin N Plus (model F5D8635-4 v1). Also, in the finder window under "shared" I see a "belkinserver" and when I click it, it says "connection failed". If I click "connect as" I get the "the server "belkinserver" is available on your computer..." which I mentioned above. I tried to connect macbook via ethernet to the modem router and then when I typed "smb://belkinserver" it immediately prompted me for a username and a password and when I typed them finally I got to enter the contents of the hard drive! So what's the problem wirelessly?

If your external drive does not have an independent power supply, you may wish to consider a couple of lower-cost options before tossing the drive. Bus-powered drives have no external power source and must get all their power from the computer. They can exceed the computer's USB energy budget.
Cheapest option:
1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
This gets power from two of the computers USB porst sna can provide enough power to wake up an under-performaing bus-powered drive.
If you don't have enough ports to use this, try the next cheapest option:
Newer Technology 7 Port Hi-Speed USB 2.0 Hub with Power Adapter for Mac & PC
Such a hub has a an independent power supply to make up for wahat the comptuer fails to provide.

Boot Camp Assistant says There is no USB drive connected to the system

I have a mid-2012 11” Macbook Air and a USB Superdrive. I am trying to use Boot Camp Assistant but it is not letting me proceed. With the Superdrive plugged and Windows 7 (full version) DVD in the drive, I get the message “No USB Drive” – “There is no USB drive connected to the system. Please insert a USB drive to continue.”
I checked using Finder and Go->Computer and there is the Windows 7 installation DVD mounted properly. The Superdrive spins up when I plug it in. I tried both USB ports. I tried re-booting with the Superdrive attached. The laptop is plugged in and there is an internet connection. It is running Mac OS X 10.8.3. I read the Installation and Setup PDF guide and there was no mention of the problem. I searched these forums and found that two other people are/have experienced the same problem, but there is no posted solution.

Randall Venhola wrote:
At the second step in the wizard, there is a dialog with three check-boxes. The only way I can proceed is if I uncheck the option "Download the latest Windows support software from Apple". When checked, I get the "No USB drive" message. Checking or unchecking the other two options does not change the behavior ("Create a Windows 7 or later install disk" and "Install Windows 7 or later"). I have tried with the Superdrive attached with Window 7 in the drive, with a blank DVD and without the Superdrive.
You are not following the Boot Camp instructions. Did you select the option to read the instructions? When running Boot Camp Assistant you are given the option to download the support software. If this is selected you must connect a usb stick that is correctly formatted per the instructions. At this point in the process you sshould not have your superdrive or Windows dvd connected.
Read the instructions.

Altell USB Internet Connect Card connection Problem

Altell USB Internet Connect Card
My daughter is using and Alltel , UT Star Com, UM 175 wireless connect card on a iMac G5 with OS 10.4.6. She had a good internet connection for two days, then nothing since. She has had many phone tech assistance with Alltel, but still unable to reconnect.
In System preferences it shows that she is connected via “Pan Tech USB Modem” port 777. She is getting good signal strength with send and receive signal and connect time. However, when using Safari and Mail app she is unable to connect to the internet.
It seems to me that the problem lies within the set=up between the iMac and Alltel card. The card seems to be making the connection, but for some reason the computer can’t realize that this card is the way to the internet. Safari brings up the usual “you are not connected to the Internet”, then the diagnostics application that guides you through troubleshooting with the usual questions, none of which include a wireless USB connection.
Is there some other thing she needs to do for her iMac to recognize the Altell card?

I just gave up on this problem and went in another direction

S920 Android 4.4.2 USB computer connection failed

Similar Messages

Maybe you are looking for