S960 Issue on Radio FM, VOlume and Internet connectivity via wifi

Hi,
just bought s960 a week ago.
1.Radio Fm reception not good
2.sound/volume via earphone not loud.especially while listening to fm radio.
3.major issue. wifi..-75 to -80dbm wifi range, the wifi seem like disconnected. however the indicatior still there. Compared to samsung s4, eventhough in same wifi range.. s4 still able to do speed test via speed test.net..s960 shown "network connectivity issue"… 
im not sure u guys facing the same issue or not....if not..its mean my phone only got problem.
Please advise, lenovo team.

Well it is very good that you are still under warranty, because it will be Apple's responsibility to sort all of these things out for you. Be sure to get a case number and be sure to document every single problem that you are having, no matter how minor. If you can document that a problem first occurred under warranty, then Apple will honor the warranty until the problem is resolved. This is particularly important to do when the warranty is about to expire.
By now you have probably already been in to the Apple Store and had your problems resolved. But if you do have any further questions, please feel free to post back.
Good luck!

Similar Messages

  • Where have my speaker volume and internet connection notification icons gone?

    This morning two 'notification icons' (at bottom right of screen) vanished: speaker volume, and internet connection. How do I restore them?
    I have Firefox 6.0.2 running on Windows Vista

    Great, thanks you two, much appreciate the help. They only say it will be restored ASAP. Has this happened before and how long did it take to fix? Also, I'm in the UK so I assume its a global issue?
    Thanks

  • Can I share my internet connection via wifi AND use my wireless printer at the same time?

    Not completely familiar with  wifi capabilities. I have this new setup in my office. I want to share my iMac internet connection via wifi so I can text and check emails using my iPhone (no cell service inside the building). Which works fine. However, I now cannot print wirelessly to my HP printer (LaserJet Pro 400 color). Once Internet sharing is off, I can print just fine. Any other wireless options, or just go get a long USB cable?

    Hi,
    It is not a multitasking printer, other devices may keep it therefore the best option in this case: connect it to your wireless router and all devices which are conntected to this router can sahre the printer.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why can't I use my mac as a WiFi extender if it is receiving it's internet connection via WiFi?

    Now I'm not the most tech savvy person, but why is it I can't use my mac as a WiFi extender if it is getting its internet signal via WiFi? Would it mess up the original signal it's receiving?

    You can do it.. but we do not recommend the use of a computer to do a task that a cheap router can handle better..
    But what you need is a second wifi card. In a Mac there are a number of ways to achieve that.. without card slots .. USB wireless sticks that are Mac compatible is one way.
    You set up the computer with ICS (internet connection sharing) just look it up.
    You receive signal on whichever network you have .. Ethernet being hugely superior of course.. and then the computer can act as router/bridge to duplicate that connection via any other network connection it has.. on a Mac with thunderbolt.. you could use a second ethernet via adapter.. or wifi with USB stick etc.
    However.. a cheap second hand Apple router will work far better doing the same wireless extend.. without requiring your computer to be on 24/7 for any other client to use.

  • OS X Leopard and internet connection via Airport

    Help! I upgraded to OS X Leopard over the weekend and now I can't connect to the internet. I am using a cable model via Airport express. I'm picking up the airport connection & network but still can't get onto the internet (I get a "server unavailable" message). I upgraded both my desktop and laptop. The laptop is working intermittently, but the desktop only rarely. I have a PC laptop that is still able to connect without a problem. I've tried unplug/replugging the Airport; manually entering the ISP address; and installing the "login and keychain update" download but nothing is working. Any suggestions? Thanks!

    Do you have Internet Sharing enabled (in the Sharing Preferences) on the Leopard Mac? These things have changed somewhat in Leopard from Tiger.

  • Dropping Internet connectivity via wifi. Tries to connect

    I just got an ipad2. It sometimes connects to my wifi & sometimes won't find the network. I have turned on/off wifi in settings, powered on/off iPad but to no avail. Any suggestions appreciated. (we have a lynksys wireless router - have rebooted it a few times as well)

    Amy-
    Try resetting the iPad's network.  Go to Settings-General-Reset-Reset Network Settings.  You will need to reconnect the iPad to WiFi.
    Fred

  • Problem connecting my macbook pro to a wired internet connection via ethernet cable adapter

    I am having a problem connecting my macbook to a wired internet connection in an area in my workplace where there is no wifi.  The macbook works fine on the same internet connection via wifi in other parts but when I add it as a wired connection it doesn't show any connection.  I have turned off wifi to make sure that it is not trying to pick up a poor connection but I still can't get this to work.  I think I am trying to set up the connection properly but can't be completely sure.  Any help would be appreciated.

    Open System Preferences>Network and make sure Ethernet is selected. If it is, open Advanced Settings (at the bottom of the Network window). Click on the TCP/IP tab. Configure IPv4 should be set to "Using  DHCP".
    Configure IPv6 should be set to "Automatically". When those are set click the "Renew DHCP Lease" button

  • Video and Internet Connection

    So I bought this brand new Macbook Pro only two months ago, and already I'm experiencing issues with the video and Internet Connection. When I try to watch video, it plays for a few minutes, then completely stops, though it is buffered and loaded completely. It never starts replaying unless i refresh it, but then it happens again and again. Then for the internet connection, when im opening websites and everything, suddenly the it says "Sorry you are not connected to the internet" then after a few moments, it works, but this is very annoying. Websites also load very slowly. Is there anything I can do?

    How many lines do you have on your wifi "fan" up at the top right of your computer and how far are you from the router? sometimes things like that happen when I sit a little too far from our wifi hub. If I show a good set of bars I have good internet flow etc. if just a single bar or barely, it gets dodgy.

  • Mail and Internet Connection conflict

    I have a VPN PPTP connection running. Most of my other Mac internet apps run fine (Safari, Fetch), for that matter Mail can read new emails. The problem is that Mail won't send mail until I close the VPN connection. I figure this is a port conflict, Mail output and Internet Connection using the same ports, is there a way to change the port either is using? If so, any idea what I should change it to?

    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.
    Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions.
    To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
    Please keep all correspondence regarding your issue in the private support portal.

  • My iMac keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Running 10.6.8 on Intel dual core iMac, it keeps on losing internet connection. Webpages get stuck after a minute or so. If I check the internet connection via diagnostics it seems to work just fine. Others, like the iPad use the same wifi connection and never fail. What can I do?

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Client dns and internet connection

    Hi,
    Running 10.5.5 Server with basic DNS for inter clients to access AFP/SMB and Wiki services via Open Directory. IP address is 192.168.1.10
    Clients currently receive internet via DHCP from a router and Network preferences autofills DNS and search domains with router address 192.168.1.1 and RP614v4 respectively.
    If I add the server IP and search domain, I can't see the server via DNS name unless I reverse the order in the fields (192.168.1.10 and ######.private). However this turns the internet connection to snail pace.
    How can I get the DNS to work for both the internal server and internet connection?
    Thanks,
    Joel.

    If your DNS server is running correctly, there's no reason why it should resolve any slower than the router. The fact you're mentioning it implies that the delay is significant so I'll guess that your clients are requesting an address from your server, but that's timing out so they're falling back to the router before proceeding.
    You should check your DNS server to make sure it's set to be recursive (so it answers queries for non-local domains, too). That way the clients can get all lookups from your server and you should be good to go.

  • Can AirPort express be used for AirPlay with my home stereo, and to give my Xbox 360 a WIRED internet connection via ethernet, simultaneously?

    I am considering buying an airport but I am not sure if it will work how I would like it to.  I need it for two things.  The first would be to use for AirPlay with my home stereo.  The second would be to use as a way to give my Xbox 360 a WIRED internet connection via the ethernet port.  I would like to do these things simultaneously, rather than constantly changing the configuration and being limited to a single function each time I do so.
    Thanks!

    The 802.11n AirPort Express Base Station (AXn) can be configured as a wireless Ethernet bridge. In this configuration, it would join an existing wireless network and its Ethernet port would be enabled for a wired client, like your Xbox 360. This configuration would also support AirPlay simultaneously.

  • Unable to receive internet connection over wifi connection.  Shows that I am connected to the network, but do not have internet access.  Checked my firewall and turned it off.  What else am I missing or should be doing differently?

    Unable to receive internet connection over wifi connection.  Shows that I am connected to the network, but do not have internet access.  Checked my firewall and turned it off.  What else am I missing or should be doing differently?

    You might want to try resetting your router and your modem - just unplug the cords, leave them unplugged for about 3-5 minutes and then replug the modem and then the router in that order.
    This may or may not correct your problem - call back if it doesn't.
    Clinton

  • How do I turn off my internet connection via 3G and be connected only to Wifi and vise vera? Iphone 4s

    How do I turn off my internet connection via 3G and be connected only to Wifi and vise vera? Iphone 4s

    Kappy wrote:
    The menubar for the Finder and your Desktop along with the date, time, and Spotlight icons. Looks like this:
    If it isn't present then open Network preferences, select the Airport port, check the box labeled: "Show Wi-Fi status in menubar." You can also turn Airport off in this same place.
    This is the iPhone forums

  • Slow internet connection via AirPort on MacBook running 10.5.7

    The internet connection via AirPort on my MacBook is frustratingly slow, and I have no idea why.
    I have an AirPort Extreme connected to a Virgin Media cable modem, a new iMac and a two year-old MacBook, both running 10.5.7. No problems at all with the wireless connection on the iMac - I get the full near-10Mbps download speed I'm paying for, despite the fact it's at the other end of the house. Not so on the MacBook, where I get barely 2Mb, even if I'm sat next to the router.
    I've had other AirPort problems since the 10.5.6 update - notably one common to a lot of people on here, it seems, of the AirPort dropping the wireless connection every 2 mins. This was only 'fixed' by the fairly drastic workaround of essentially abandoning my user account and connecting via a different one.
    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    Can anyone help? Thanks in advance.

    For the slow internet problem, I've tried resetting the PRAM, turning off my cordless landline phone, changing the wireless channel - to no avail. I can't test the wired connection as my MacBook doesn't recognise my Ethernet port, it would seem, and hasn't for a long time.
    I assume that you meant NVRAM as PRAM is not used with Intel-based Macs. Regardless, network settings are not stored here and resetting it won't really help. The fact that your MacBook is not recognizing the built-in Ethernet port is telling me that may have an issue with the system board ... that may be showing up as poor performance with the AirPort as well. I suggest that you take your MacBook in to your local Apple Store to have them take a look.

Maybe you are looking for

  • How to connect Apple TV to an older TV?

    I used to connect my iPad to the TV through a specific lead which had the red/yellow/white inputs (sorry - not sure of the technical term!) and that worked really well - when I lost my iPad and replaced with the newer version, this lead would no long

  • WDS & VLANS

    We are trying to setup a wireless system at our restaurant to be able to use wireless handheld POS devices and allow guest internet access. The hardware we have is, RV 120W Router, and 2 WAP200 access points. What we were trying to do is setup a VLAN

  • Add Text to Activity using  BAPI_ACTIVITYCRM_CREATEMULTI

    All: I am creating activities as part of a data load. One of the requirements is to assign text to a text type associated with an activity journal. However, I am struggling with this last piece of the puzzle. I have lifted most of my code from the pr

  • Problems Viewing JQuery With Firefox

    I have been developing using IE6 and having no problems getting JQuery to work. I hold my JQuery js and css in external files and then reference them using substitution strings in the shared components/application definitions. I then place a call to

  • How to generate Payroll Posting

    Hi All   I’m facing problem in generating payroll posting IDoc to send to FI System. Payroll was run for all employees in a payroll Area. I released the document, but still the payroll posting IDoc is not generated when we look using WE02. Hope I hav