SA520 + Quickvpn + cant access network drive

Hello,
Ou customer have SA520 and VPN with QuickVPN.
One of the computers have W7 Home Prem 64bit and only Windows firewall ON.
Problem is that vpn connection itself connect as it should and i can ping routers ip-address but
when i try to connect to network drive it dont find it and ping doesnt answer.
What is the problem, i have tried to make holes to Windows firewall but it should not need those.

Hi Tero,
I think the issue at hand is that XP Home cannot reach the shared resources on the XP Pro "server".  See:
http://www.compatdb.org/forums/topic/38973-xp-pro-wont-share-my-documents-with-xp-home/
The solution may lie in getting the XP Home PC to have the Security Tab.
Hope this points you in the right direction.
Cheers,
Julio

Similar Messages

  • MOVED: Cant load networking driver for neo 2 plat

    This topic has been moved to AMD64 nVidia Based board.
    Cant load networking driver for neo 2 plat

    1. Put your Windows CD in the drive.
    2. Select Install Windows.
    3. Let install continue.
    4. After the first restart, you will see something about Recovery Console.  Do NOT select this option.  Just let setup continue.
    5. You will soon see a message "searching for existing Windows installation".
    6. Soon after, you will be given the option to REPAIR that installation or make a new installation.
    7. Select REPAIR.
    8. Just keep going.
    That's it.  Hopefully things will be just fine after the repair is done.

  • How can I change permissions to access network drive

    I change Cf user permission for I access and upload my network drive documents(for using a cffile action="upload"). I need to add permission on the network.How change my Cf access my authority.http://help.adobe.com/en_US/ColdFusion/9.0/Installing/WSf01dbd23413dda0e-2c56ae6b11fae6200 fe-8000.html
    I couldn't not to it.This isn't enough information.Could you be helpfull?

    The user associated with the service credentials needs to have permission to use the drive in question. You will also have to access the drive using its UNC - \\serverName\serverShareName\directory\...
    By default, the CF service uses a local system account as its login credentials. You'll need to change this to an actual user account.

  • Finder crashes when accessing network drive

    We have four macs on our network. When trying to access a volume on our network drive Finder crashes. The drive is accessible via FTP as well as From Windows Machines. Its only on Finder that we are having the problem. Everything use to work.
    Im on an iMac, my Finder totally spazes out. Blinking off an on. On another system it just crashes. On the other two systems it just won't access the drive & Finder closes.Just started today.
    If anyone know what this is please help!

    Hi Barry,
    Thanks for the suggestion. Unfortunately I did buy diskwarrior on my way home, ran it a few times. No success. It did identify problems it couldn't fix with a lot of the files that were in my suspect folder (a font folder) but since I can't access the files directly on my hard drive I can't get rid of them.
    I did follow your suggestion, but all that it did that I can see was scatter my folders on the desktop.
    Yet, while typing this, I just found a creative way to solve the problem!!! I was able to access the font folder in Bridge even though I couldn't access it otherwise. I deleted it in bridge and now things are working as normal!!! Thank God for Bridge. Amazing. Especially since that font folder has been on this machine for months, and the previous machine for years without ever causing a problem...

  • Accessing network drives through 9iAS

    Hi,
    I posted this in "Application Server General" but havn't had a response so thought I'd try here. Has anyone heard of or experienced the following problem ?
    Im trying to access a file on a novell network drive using the following JSP code.
    <%@ page contentType="text/html;charset=windows-1252"%>
    <%@ page import="java.sql.*" %>
    <%@ page import="javax.naming.*" %>
    <%@ page import="javax.sql.*" %>
    <%@ page import="java.io.*" %>
    <%
    FileReader fr = new FileReader("p:project/systemdocs/test.htm");
    BufferedReader br = new BufferedReader(fr);
    %>
    My problem is whenever I try to access a network drive I get the following error.
    java.io.FileNotFoundException
    This only happens when running through 9iAS and only when trying to access a network drive. If I run my JSP through the OC4J Server that comes with J-Developer I have no problem accessing the files on the network drive with the above JSP.
    Does anyone know why 9iAS might be having problems with the network drives??
    Thanks

    One thing I forgot to mention is that the PC has XP Home Edition for the OS. Hasn't anyone done this sort of thing yet???
    Thanks.

  • Enabling OC4J to access networked drives

    Does anyone know how to enable the application server to access files on a mapped drive?
    If I use standalone it can see the network drives but the application server cannot.
    Anthony

    I am having the same issue. I have a connected drive that is in the sharing prefs that people cannot see, but another drive that is connected that ISN'T in the sharing preferences CAN be seen.
    There certainly seems to be some sort of issue here...
    I'll let you know if I find any further information. Thank you... should be so simple...but.

  • T43 motherboar​d damage cant access hard drive

    Hello, I wonder if anyone to there could advise me.
    I have a T43 with finger print reader, I was shoved on the train and dropped my bag
    which resulted in it hitting the floor and the plug punched through the back into the
    motherboard. The laptop was in standby at the time.
    I have brought a USB 2.5 hard drive connector to try and recover my data but cannot
    access it.
    Is the hard drive encrypted if the finger print reader is used.
    Can the hard drive be crashed so badly by the mother board being damaged that
    you cant access it anyway?
    Many Thanks
    Dave

    davidadams, welcome to the forum,
    ouch! sorry to hear about your bad luck.
    The fingerprint doesn't encrypt the hard drive, Client Security does if you configured it to do so.
    If you had the finger print configured with a hard drive password set in bios you will not be able to access the hard drive in an usb enclosure. As long as you know the password it is possible to remove the password in another ThinkPad, preferably another T43.
    As your T43 was in standby, it is possible that the drop also damaged the hard drive. This would have been less likely if it had been in hibernation mode or turned off as the heads would have been properly parked.
    There are ways to recover files from a damaged hard drive, some less costly than others; it depends on how badly it is damaged, if it is damaged.
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • Cant access slave drive

    hello, im new to this so i hope my lack of knowledge isnt to frustrating. i need help though. i recently 95% completed my first build. using the items listed below. now i cant access my slave drive. i receive a message telling me " d: drive not formatted do you wish to format now" in windows (the drive in question has always been a slave never had any os installed but was present with the xp os on master drive in previous system) both hard drives and cds are present in bios and in windows , i was wondering if there is ANY way to save teh data or if im out of luck thank you for any information. look forward to learing more .
    windows XP pro OS
    MSI pt880 NEO-LSR main board
    Pentium 4 2.40A Ghz 104 V max cpu
    512 ddrram memory,( more to follow)
    IBM ide 12 gig drive (master) IDE 1
    western didgital 80 gig drive (slave) IDE1
    cd rom (master) IDE2
    plextor cd/cdw (slave) IDE2
    im not sure if you need more specs than that please let me know if you do i can look it up as i said im new but willing to learn. thank you
    i accidently posted in the amd forum first , but was given the advice to try it in another system and save to cd's so ill try that. any other advice would be greatly appreciated. thank you

    First, you need to verify that D: point to your slave drive. You can do that in WinXP Disk Management. Do you have any valuable information you need in the slave drive? If no, just go ahead and format it. Did you also mention the slave drive had a OS for previous system? If yes, change the boot sequence settings in the BIOS and let it boot to your slave drive. Perhaps from there you can save some data. If not, well, just go ahead and format it.

  • Power outage, and now can't access networked drive

    Hi,
    Hope someone can help with this. Recently, we had a power cut. When everything came back on, the PCs on out network, and the macs with OSX had no problem loggin into our Buffalo TeraStation, accessing the share folder, and seeing the files. However, two macs still on OS9 can connect as quests, can see the share folder, but it shows up empty (zero items)!
    Any help would be most gratefully received.
    Cheers,
    Kev.

    Hi,
    Thanks again for all your help, but unfortunately, still no joy. Oddly, both Macs can see and connect to the buffalo drive; and can see files and folders on there, except for the one folder that contains our backups. Again oddly, I created another folder on the drive (called it backup two) and the macs can see it and, when I transer some of the files from the original backup folder into the new one, they become visible to the two OS9 macs! Of course, I could just copy all the files frmo the old backup to the new one, and all would be well, but, (a) it would take ages, (b) some of the files won't copy over for some reason (c) we wouldn't know how to fix the problem should it recur.
    Again, any help would be gratefully received.
    Cheers,
    Kev.

  • Nokia 3250 cant access network

    i bought a nokia 3250 and after just a month, it stopped accessing the network so i cant make or receive calls. it shuts down and restarts agin continously and i can only use the phone in offline mode. i updated the firmware but it didnt work. any ideas please?

    Next stop: Nokia authorized phone repair/service center: http://www.nokia.com/repair

  • Dreaweaver problem accessing network drive

    We have a problem with Dreaweaver freezing intemittently when
    accessing a network /mapped drive.
    Any suggestions?

    not sure...
    my only thought was that the service runs under a user without permissions to that resource.
    interesting...
    do you have to "log into" the shared drive when you want to run the std. application or is the shared system just based on users allowed to access it?

  • Use of QuickVPN to access network behind a RV042

    Hello,
    I have a RV042, and all incoming WAN requests are forwarded to a network located behind the RV042.
    Internal IP range of the RV042 is 192.168.0.x (RV042 IP is 192.168.0.1, and everything is forwarded to SG300 L3 with IP 192.168.0.2), and some networks 10.0.x.x can be reached via the SG300 L3.
    This works fine.
    And from the "Diagnostic tool" of the RV042, I can ping all devices in network 10.0.x.x.
    I can connect to the RV042 using QuickVPN.
    I can ping the 192.168.0.2 interface of the SG300, but... I cannot reach the networks located behind the SG300.
    How can I reach the servers located behind the RV042, in network 10.0.x.x ?
    Thanks in advance for your help.

    Hi,
    that depends on the actual application you entered. the application is also an open entry and you could create your own application and then enter additional parameters if needed
    ingo

  • Accessing network drive (kind:sharepoint) as user with no admin priviliges

    I have a (linux) server which stores - and backs - up quite a bit of data for several users on my mac (Leopard).
    I have set up AppleTalk on the server and password protected access. This works excellent. But for some reason I have to enable admin rights for all users to my computer - otherwise it is not possible to access the server data. I can see all the shared folders - but it simply does not allow me to access the data. It seems that my mac does not allow me to "mount" the drive...
    On the log I get.
    "NetworkNode:handleMountCallBack returned -6602"
    It is a bit uncomfortable to have all users of my mac as "admin". Do you know how to fix this problem?
    With kind regards,
    Björn
    Message was edited by: Bjorn_is

    Hiya,
    Your absolutely right in the last part. Recreating the user, gives them a new SID and you have the add that SID to SharePoint.
    I would use a Powershell script to find all the places the user has permissions and replace with the new user SID.

  • Accessing Networked drive through Creative Media L

    I am just about to load my 2nd Zen Stone (the first died at birth) and cannot access my Ripped CD's as they reside on a networked dri've. Anyone know a way round using Creative Media Lite (Version .00.08)?Regards?Tony

    the appletv can access a shared itunes lib of a computer turned on and running itunes with a shared lib
    the appletv can be used as airplay speaker for audio and video by a compatible mac or ios device
    the appletv can by no other means play or access any sort of movies or musik from your local network
    where the media is stored in terms of the itunes lib is irellevent for the appletv it can be stored on a nas or on a 5-1/4 floppy disk the appletv knows no difference it only get the interface itunes shared lib present to it

  • How to access network drive in mac app ?

    Hi All,
    How to get the access to the file system of a networkdrive in mac app ? Let the shared path is
    \\192.168.2.57\JPEG .
    What are the apis use to connect to a networkdrive ?
    I am using Lion OS and the server is a Windows Server running with smb services.
    Please guide me.
    <Email Edited by Host>

    Thanks for your quick response.
    I am using NSTask to execute the script
    _localMountPath = @"/Users/pacs/Documents/Temp";
       NSTask* task = [NSTask new];
        [task setLaunchPath:@"/sbin/mount_smbfs"];
    str = [NSString stringWithFormat:@"//Demo;Administrator:Password@[email protected]/0BF045A8"];
    [task setArguments:[NSArray arrayWithObjects:str,_localMountPath, nil]];
        NSPipe *outputPipe = [NSPipe pipe];
        [task setStandardError:outputPipe];
        [[NSNotificationCenter defaultCenter] addObserver:self selector:@selector(mountCompleted:) name:NSFileHandleReadToEndOfFileCompletionNotification object:[outputPipe fileHandleForReading]];
        [[outputPipe fileHandleForReading] readToEndOfFileInBackgroundAndNotify];
    [task launch];
    The problem here is password is having @ symbol inbetween .
    The format is @"//Domain;User:Password@servershaedpath"
    So the compiler is taking the path as "@[email protected]/0BF045A8" and not able to connect.
    How to solve the problem of Passwordhaving "@" symbol inbetween.
    Thanks

Maybe you are looking for