SAAJServet error when sending a SOAP message on 10.1.2
Hi,
We have deployed a server application in OC4J 10.1.2 with a servlet listening for SOAP messages (SAAJ 1.2). If we use Standalone OC4J with SSL enabled and HTTPS communication between client app and server, it works fine, but when we move it to an Application Server environment where client goes HTTPS to the frontend HTTP_Server and then AJP to the OC4J, the following exception appears on the application.log:
07/03/27 17:48:36 application/gpm-0.1: Servlet error
javax.servlet.ServletException: SAAJ POST failed Unable to internalize message
at com.sun.xml.messaging.soap.server.SAAJServlet.doPost(SAAJServlet.java:212)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
at com.evermind[Oracle Application Server Containers for J2EE 10g (10.1.2.0.2)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind
Any ideas what can go wrong here, or where else to look?
Message was edited by:
[email protected]
The standalone OC4J is 10.1.3, sorry. Nevertheless, we include all the libraries we use (saaj and dependencies) in the appliaction .ear archive that we deploy in both environments. May be a configuration issue?
Similar Messages
-
Need better info on error when sending a SOAP message - logger ALL
Hi all!
I am calling a UCM content server CheckIn WS from JDeveloper 11g 1.1.1.1.0 (jspx). I've used the WS Data Control and a WSDL for this, and have most of it down besided the CustomMetaData part.
I need to pass in a value for one of the custom metadata fields and when i try to override the parameters of the operation to include it, i get this error - i doubt that this is all the info i get.
I've tried setting the logger.xml levels to ALL (C:\oracle\Middleware\jdeveloper\modules\oracle.odl_11.1.1\server_config\logging.xml) - nothing changed.
Sep 25, 2009 6:45:58 AM org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to windows-1252, because request parameters have already been read.
Sep 25, 2009 6:45:58 AM org.apache.myfaces.trinidadinternal.config.upload.UploadRequestWrapper setCharacterEncoding
WARNING: Unable to set request character encoding to windows-1252, because request parameters have already been read.
Sep 25, 2009 6:45:58 AM oracle.adf.controller.faces.lifecycle.FacesPageLifecycle addMessage
WARNING: ADF: Adding the following JSF error message: Encountered an internal error creating the SOAP request for the operation.
oracle.adf.model.adapter.AdapterException: DCA-40008: Encountered an internal error creating the SOAP request for the operation.
at oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider.setParameters(SOAPProvider.java:656)
at oracle.adfinternal.model.adapter.webservice.provider.soap.SOAPProvider.execute(SOAPProvider.java:302)
at oracle.adfinternal.model.adapter.webservice.WSDataControl.invokeOperation(WSDataControl.java:251)
at oracle.adf.model.bean.DCBeanDataControl.invokeMethod(DCBeanDataControl.java:427)
at oracle.adf.model.binding.DCInvokeMethod.callMethod(DCInvokeMethod.java:256)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.doIt(JUCtrlActionBinding.java:1437)
at oracle.adf.model.binding.DCDataControl.invokeOperation(DCDataControl.java:2120)
at oracle.adf.model.bean.DCBeanDataControl.invokeOperation(DCBeanDataControl.java:464)
at oracle.adf.model.adapter.AdapterDCService.invokeOperation(AdapterDCService.java:307)
at oracle.jbo.uicli.binding.JUCtrlActionBinding.invoke(JUCtrlActionBinding.java:693)
at oracle.adf.controller.v2.lifecycle.PageLifecycleImpl.executeEvent(PageLifecycleImpl.java:394)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding._execute(FacesCtrlActionBinding.java:217)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlActionBinding.execute(FacesCtrlActionBinding.java:201)
at view.backing.CheckIn.cb1_action(CheckIn.java:209)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.sun.el.parser.AstValue.invoke(AstValue.java:157)
at com.sun.el.MethodExpressionImpl.invoke(MethodExpressionImpl.java:283)
at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:673)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:273)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:165)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:191)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:85)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:54)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:420)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:247)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:157)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.security.jps.wls.JpsWlsFilter$1.run(JpsWlsFilter.java:96)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
at oracle.security.jps.wls.util.JpsWlsUtil.runJaasMode(JpsWlsUtil.java:146)
at oracle.security.jps.wls.JpsWlsFilter.doFilter(JpsWlsFilter.java:140)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:202)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3588)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2200)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2106)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1428)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Here is my bean code:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM!");
HashMap customDocMetadata = new HashMap();
customDocMetadata.put("property", customMetadataPropertyRoom);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
The one with the fileContent and fileName works good since it's only one level deep, but it seems that i can't do the same logic with the 2 levels deep.
*<CustomMetaData>*
*<property>*
<name>
<value>
</property>
</CustomMetaData>
Please help - i've did not get a minut of sleep and it's already 7 AM :((( It's not the first time i a having all nighters while doing JDeveloper...so little resources on line...
I hope someone can help me out quickly since i am on a short deadline.
Btw, i used the wizard and the wizard did not generate any stubs like the axis does, so i assume it's all integrated...Hi all!
Just to post the solution to this if anyone ever runs accross this thread...
For some reason i had it bad the first time, don't have time right now to see why but here is what worked for me:
HashMap primaryFile = new HashMap();
primaryFile.put("fileContent", bFile);
primaryFile.put("fileName", uploadedFile.getFilename());
operationBinding.getParamsMap().put("primaryFile", primaryFile);
HashMap customDocMetadata = new HashMap();
HashMap [] properties = new HashMap[1];
HashMap customMetadataPropertyRoom = new HashMap();
customMetadataPropertyRoom.put("name", "xRoom");
customMetadataPropertyRoom.put("value", "SOME ROOM");
properties[0] = customMetadataPropertyRoom;
customDocMetadata.put("property", properties);
operationBinding.getParamsMap().put("CustomDocMetaData", customDocMetadata);
Basically an unbounded wsdl type is an array of objects (HashMaps), makes sense, i thought i had it like this before, must have messed up somewhere...
Good luck all! -
Error while sending XML SOAP message to other network
Hi,
I have a java application using SOAP through which I am sending request to a machine in the same network. It is giving the response in xml and i am able to parse it.
But when I tried to give the IP in the destination i.e the IP in the other network.
Error message SAAJ 0009 i.e message sending failed is getting to me.can somebody help to me.
Thanks
AbhilashHi Ricardo ,
I have the correct port now.
the url looks like
http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST
when I am testing it in the XML spy. and send a soap server request. I am getting the popup for user authentication . once i put my user id it gives me a error saying
<b>HTTP operation 'POST' could not be performed on URL
'/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST&version=3.0&Sender.Service=SIEBEL_DEV&Interface=http%3A%2F%2FOFCOM%2FUNIFY%2FCustomerMaster%5EMI_CUST' due to an error :
The connection to the server was terminated abnormally</b>
Any Idea as to why is such a error is coming
Thanks for the help
Nikhil -
String index out of range: 0 error when sending to SOAP Receiver
Hi experts,
I have an interface
IDOC -> XI -> SOAP
Occasionally I will get this error message from RWB when sending to the SOAP service:
Delivery of the message to the application using connection AFW failed, due to: String index out of range: 0
To trace the soap message, I sent the message through a TCPMonitor, the error does not occur anymore.
Has anyone met with this problem before?
How do I resolve this?
Thanks!
Ron> Wee,
>
> The error states there is some problem in your
> message mapping. Have you used any substring function
> in your mapping. If yes can you check the message for
> which you have got error in message mapping. For this
> open sxmb_monin and open your message and then right
> click and then view source. Then copy this source and
> test in message mapping test tab. Then you will come
> to know whether you have any mapping error or not?
>
> ---Satish
I did not do any substring in the mappings.
The strange thing is, with the same message, I can re-send without any error if I send this message through the SOAP TCP Monitor. -
Not delivered error when sending photos via messages-photos being received
When using messages on iPhone 5 to send photos, I receive a not delivered error but the recipient tells me it has been received. I have tried turning phone off/on, signing out of messages on all devices then signing back in. Still occurring. Any ideas??
Hello tsbnewtomac,
The article linked below provides some useful troubleshooting steps that can help get Messages working correctly.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen -
Hi All,
I am using project server 2007 and WSS 3.0.
I have been facing a strange issue for couple of days. I am unable to open PWA in browser and MS Project Pro on application server.
Everything is correct whether it is URL or MS Project profile account on MSP. This is strange because i can open same PWA/MSP from other computers (Database server / Client PCs) but not locally on server.
When i try to connect to MSP on App server, i get the following errors in event viewer.
Event Type: Error
Event Source: MSSOAP
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Connection time out..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: An unanticipated error occurred during the processing of this request..
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description: Soap error: Sending the Soap message failed or no recognizable response was received.
Event Type: Error
Event Source: MSSOAP
Event Category: Client
Event ID: 16
User: N/A
Computer: APP-Server-Name
Description:
Soap error: Unspecified client error..
One more issue i am facing and i guess that is related to above issue. The Issue is, when i am creating a new project, It's workspace gets created but doesn't get linked to the project and i can't link it manually because it already exists for the project.
sandeepHi Paul ,
Thanks for reply. The project server URL was already added to the Trusted
Sites/Local Intranet areas in IE.
sandeep -
Error when sending message: 500 Internal Server Error
Hi
IE is not accepting any messages,
when I try to send the messgae to the IE ( using RWB) i am getting the below error " Error when sending message: 500 Internal Server Error".
following things what i have noticed.
1. Pipleline URL is fine, both in the BS of XI and in the RFC destnation which i am maintaing on the IE admin) URL is "http://<host>:8000/sap/xi/engine?type=entry"
2. SICF all the XI serivess are up and running, i am able to test these service.
3. The http port is active ( SMICM )
Pls note the error is 500 Internal Server Error
regards
NisarI think in a simple term 500 can be said as "the request cannot be processed curretnly", these options mentieoned by you are not applicable in my case.
This generally occurs due to load problem or if you are on an SP less than 12 or even if there is an administration problem---I am on PI7.0 , what are the administration problem you are talking about?
1 Check Table Space is enough. ---i had installed server recently & very few interface running.
2 Server licence Date or Time. In this case change system date and restart server.---i have recently installed server.
3 Check the service pack levels on your XI. If it is obsolete upgrade it with latest versio----Can u explain more on this?
Try restart the java stack(XI Server) and follwing services.
com.sapii.af.app ---I am not passing trough Adater framework, so i dont think this service will matters....
com.sapii.cpa.af.app.---CPA cahe is done sucessfully, as i said i am not passsing through adapter framework.
basically for a simple HTTP post what might cause 500 error if all necessary services are up and running?
regards
Nisar -
Error when sending message: 404 not found
Hi,
New to XI, practicing file to jdbc scenario. File is pickedup from the source folder but nothing appearing on the receiver end ms access database.
In the Component Monitoring, tried sending message manually with all the right info in Integration engine, getting an error message saying:
"Error when sending message : 404 not found"
Also tried in Adapter Engine and the result same.
Before doing this scenario, I tried file - file scenario then also the sender file pickedup from source folder but nothing happend at the receiver end.
Any idea's?? what might be the issue????
Thanks,
Venu.Hi Venu,
"404 is a not found error", plz make a check of your URL you're using is correct? do you use the right port? Normally the port is 80<SystemNo>, so rather 8001 than 7001.
Also check in transaction SICF, if the node /sap/xi/adapter_plain has been activated, if not, activate it and try again.
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Also check that the Adapter Engine is successfully registered in the SLD. To do this, call the Content Maintenance function in the SLD as follows:
http://<sld-host>:<sld-j2ee-port>/sld u2192 Administration u2192 Content Maintenance.
Select XI Adapter Framework.
Thirteen associations have to be registered.
(Source: https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2498bf90-0201-0010-4884-83568752a857)
If you can't find all the associations, then you will have to create the associations manually.
This is a very good blog which answers ur question:
check this weblog
https://weblogs.sdn.sap.com/pub/wlg/4061?page=last&x-showcontent=off [original link is broken] [original link is broken] [original link is broken]
Regards,
Vinod. -
Error when sending message: 500 Timeout
while sendin a message in the http to rfc scenario, im gettin this error message "Error when sending message: 500 Timeout".
can any1 throw some light on this.Hi venu,
you need to go to RZ10 and there select the profile instance and go with the extended maintance option in the change mode.
there are two ways you can change it:
1. check out note: 824554
TCODE - rz10
icm/server_port_0 = PROT=HTTP,PORT=8010,TIMEOUT=800,PROCTIMEOUT=800
(for 800 seconds)
8010 is my HTTP port so you have to change it:)
2. SXMB_ADM -> configure integration server -> change specific identifiers
runtime parameter:
Parameter HTTP_TIMEOUT
Meaning
Specifies the timeout for http connections (time between two data packages at line level). This value overrides the system profile parameter icm/server_port_n (for example, icm/server_port_0 : PROT=HTTP, PORT=50044, TIMEOUT=900). If you do not set the parameter HTTP_TIMEOUT or if you set the parameter to 0, then the setting for the system profile parameter is used.
Personally I only changed the one from the instance profile but the second one should work too
My suggestion is change only PROCTIMEOUT to 600 or 900 but dont change TIMEOUT. Imp thing is u need to restart the XI, then onlychanges will take place.
If these dosent work out go for changing TIMEOUT also. Just set the value for the instance and dont maintain the HTTP_Timeout in the sxmb_adm
Let me know what u have done , if it works
Thanks,
srini -
Test message from RWB: Error when sending message: 401 Unauthorized
Hi Experts,
While I am sending test message from RWB, I am getting following error:
Error when sending message: 401 Unauthorized
I am using correct userid/password as I am working with Repository/directory. Also in one of the test scenario files are picking up from folder but never got processed because of similar issue (HTTP_RESPONSE_CODE_NOT_OK) and SERVICE NOT AVAILABLE.
I am having SAP_ALL authorizations and few days back everything was fine.
I think something wrong with configuration in XI but I am unable to pin point.
Please help.
Regards,
GouravYes,
but
Role of Business System : Integration system
Corresponding Integ. Server : http://<XI server>:<http port>/sap/xi/engine?type=entry
How can I change it to Application system
and RUNTIME->IS_URL = http://<XI server>:<http port>/sap/xi/engine?type=entry
Regards,
Gourav -
RWB:Error when sending message: 404 Not Found
Dear all,
"i am getting error: Error when sending message: 404 Not Found"
while testing from rwb > Component Monitoring > Non-Central Adapter Engines > Adapter Engine AIPID > test message >
with send message to = http://pid:50000/sap/xi/engine?type=entry - pi server url
sld buss system > pipeline url http://pid:50000/sap/xi/engine?type=entry (same)
and my id comm channel > target host > bid.xxx.com with service no
(adapter type: xi
adapter engine: Integration server
address type: url address
target host: bid
service no: 8000
path: /sap/xi/engine?type=entry
i am working in nw2004s system)
while testing cache connectivity test from rwb > Component Monitoring
i got error:http://docs.google.com/Doc?id=dcdrq9jt_0g6j35p
green: Integration Repository
green: Integration Directory
green: Integration Server - JAVA
red:Adapter Engine af.axd.aipid
yello:Integration Server - ABAP
Adapter Engine af.axd.aipid > Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
though if i try to send message from rwb...> with send message to field with : directly to bi rather than pipeline url through bi than message send successfully but not getting into component monitoring.
what should i do?
best regards,
dushyant.
refer this forum: is rwb's send message to field = sld>buss system>Pipeline URL?
and
SXI_CACHE
@8O@ Error during last attempt to refresh cache
LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM
Smq2 = 0
Sm58 = 0Hi,
If you are testing sending the message to the Adapter Engine, then the Send Message URL should be like this:
http://<server>:<J2EEport>/MessagingSystem/receive/AFW/XI
For your error, refer to the following threads:
Unable to find an associated SLD element
Unable to refresh cache contents in XI.
Unable to find an associated SLD element
Cheers
Manish -
Error when sending message: Method not implemented
Hi, All:
We have newly setup system and when we test sending test message from RWB, (RWB-Component Monitoring-Integration Engine-Test Tab), we got following error:
"Error when sending message: Method not implemented", I know this is related to post configuration issue, I just know someone has come cross the situation and how it was resolved.
Thanks
LiangHI Liang
Yes it looks like post installation problem. I have not come across this but i think you should check with the RFC created for IE while installation. To connect IE & AE and even the exchange profile if something is missing
Thanks
Gaurav -
Error when sending message(e-mail) from Process Chain ?
Hello SDN s,
How ya all ?
I scheduled a Process Chain with Message option to send it to (U - INternet Address) email ID but it says some error in sending message. What could be the reason ?
The following is the Job Log Entries....
30.06.2006 18:05:53 Job started 00 516 S
30.06.2006 18:05:53 Step 001 started (program RSPROCESS, variant &0000000000261, user ID ALEREMOTE) 00 550 S
30.06.2006 18:05:54 Hierarchy/attribute change successfully carried out RSM 794 I
30.06.2006 18:06:00 Document <PV FOR GETTING MESSAGE THROUGH E-MAIL - SUCCE> could not be sent SO 654 S
30.06.2006 18:06:00 Error when sending message RSRA2 11 S
30.06.2006 18:06:01 Job finished 00 517 S
Thanks !!!
Best Regards....
Sankar Kumar
+91 98403 47141Hey yes, in that T.Code all the values are 0. What to do to activate that ????????????
Duration Duration
Completed Error In transit Waiting In transit Waiting
hh:mm hh:mm
B08(100) 0 0 0 0
FAX Telefax 0 0 0 0 0:00 0:00
5 INT Internet 0 0 0 0 0:00 0:00
SMTP 0 0 0 0:00 0:00
X40 X.400 0 0 0 0 0:00 0:00
RML R/Mail or 0 0 0 0 0:00 0:00
PAG 0 0 0 0 0:00 0:00
PRT 0 0 0 0 0:00 0:00
So, how to solve this issue ? how to send e-mails ? what configuration or settings to be done ?
could u give the steps to do that ? as i am the only one BW guy here !?
Thanks !!!
Best Regards....
Sankar -
Error when sending message: 403 Forbidden....sender si file
hi...
here iam working with File to IDoc scenario
file is picking from a particular source but its is not showing any messages in SXMB_MONI and in IDX5 (outbound) or in RWB.
when i check test my message in RWB its is showing Error when sending message: 403 Forbidden.
can anyone explain me this problem plz...
all my DESIGN and CONFIGURATION is fine....
its urgent...
THX..
john weslyHi John
403 Forbidden
The server understood the request, but is refusing to fulfill it. Authorization will not help and the request SHOULD NOT be repeated. If the request method was not HEAD and the server wishes to make public why the request has not been fulfilled, it SHOULD describe the reason for the refusal in the entity. If the server does not wish to make this information available to the client, the status code 404 (Not Found) can be used instead.
for more details on error code follow the link
http://www.web-cache.com/Writings/http-status-codes.html
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
http://www.helpwithpcs.com/courses/html/html_http_status_codes.htm
first try to solve problem by making CACHE refresh
either by directory
Check whether you have given the right credentials. If you are very sure that you have given right credentials then your problem will be solved by restarting J2EE engine
steps to restart J2EE engine
1) run transaction SMICM
2) then in the tab administration => J2EE instance(local) =>send soft shutdown with restart
by this java engine will restart and will be up in 5-10 minutes and your problem will be solved
Thanks
sandeep sharma
PS ; if helpful kindly reward points -
Hi All,
We recently had SP upgrades fro sp09 to SP 17.
From then we are getting an error as below when tring to send the soap message and the SOAP adapter went to inactive state .Several restarts dint help.
Source: SAPIntegrationAdapter
Message: <?xml version='1.0'?>
<!-- see the documentation -->
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text><![CDATA[
com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name, MessageServlet(Version $Id: //tc/xi/NW04S_17_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#2 $)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:421)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
]]></text>
</s:SystemError>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
any clues would be helpful.
Thanks,
Srinivasa1. it clearly states that it is not able to find the sender channel name..
what i would suggest is create the WSDL again and send it to the sender system..
2. also acivate the SOAP adapter and start and stop the SOAP adapter.
Also if this doesnot help you can restart your java enjine
Maybe you are looking for
-
Purchased app from iPhone won't transfer to iTunes
I purchased an app on my iPhone and now every time I sync, it starts off with: Transferring purchases from "iPhone", Copying (app) The progress bar get about 10% and then it moves on to the next task such as installing new apps or syncing contacts. I
-
My two Macs running Mountain Lion (10.8) won't print wirelessly to the HP CP1025nw. HP Setup Assistant can't find the printer after it's set up wirelessly. The computers see the printer wirelessly when I try to add it, but there are TWO copies of the
-
Need help setting up Flex on server (sdk?)
This should be a simple noob question: I have Flex Builder on my local machine. I've created an application (project.mxml) that uses VideoDisplay to play some videos chosen from a List using an XML file as the data source. The app works great testing
-
How to deactivate my pandora account?
II've been paying for my pandora account for years but I would like to erase the account and start over and I've emailed different people and it is not that simple. Can someone show me a short cut?
-
Audio not rendering in FCP 5.0.1
I'm not able to render any audio in the Timeline. The clips are brought in as QT files (not captured). When trying to audio render as is, the audio render window quickly flashes w/no change in render status. (line at top remains red). Video renders O