Safari 2.0.1 issues and Macromedia Producti issues

Dreamweaver functions that no longer work properly in Safari 2.0.1:
* Javascript extensions like Tree Magic Menu
* Flash Player issues: Actionscript that uses Javascript to open new windows are seen as Security problems and are stopped from completion. Unable to adjust via security panel since Safari says the Flash Player plug-in isn't installed (it is!).
I believe the above are Safari issues since the same sites when viewed with other browsers (Mozilla, Firefox, even IE) work fine.
As a web designer, how do I work around these problems with Safari?

Joe,
I'm having the same problems here. Since Safari 2.0.1, all of the Flash music players (which stream audio) on my site (primaryelements.com) crash Safari right when they start to stream. I'm not sure what piece of Actionscript is the problem, but the update has basically killed my business for anyone using this same configuration.
Needless to say, I'm not thrilled, especially since I've been promoting Apple on my site for 7 years as an all Mac-developed service.
I've tried all of the standard troubleshooting tricks (re-install flash, dump cache, prebinding, permissions, reset safari, trash prefs, disk util, restart, etc., etc.) short of re-installing Safari 2.0 (anyone know the best way to get this? Tiger DVD?) with no help.

Similar Messages

Report Builder - Last page issue and Report Footer issue

I am using ColdFusion 9 Report Builder, am new to this product and encountering 2 issues.
Issue 1 - I have a field that I would like to print on the last page of my report. How can I determine the last page? I initially tried using a calculated field set to the 'highest' calc.Page_Number. Then I could compare the current page to the last page in the 'Print When' property. But calc.Page_Number can not be used in a definition of a calculated field.
Issue 2 - Depending on the amount of report detail, sometimes my report footer prints alone, without a page header and page footer. The report includes this page in the total number of pages. For example, if it is a 2 page report, the page header on page 1 will display Page 1 of 2. Then the only data on Page 2 is the Report Footer. No page header or page footer prints.
Any assistance on these issues would be most appreciated. To date, using the Report Builder has not been easy.

To issue 1: The report contains a report band called report footer. thsi is always at the last page. The report footer band initially is collapsed, so you have to expand it by dragging the last band divider.
To issue 2: I guess this is a page break calculating error when detail data reaches really near the page footer area.
Try some experiments with different setting of the following properties/issues:
- in elements, e.g. calculating fields in the bands between report detail and page footer: In Properties / Print Control / Printing Options: Activate the option "Remove line when blank". This will remove the whole report band area if this field is blank. May save some empty space.
- try to remove unused empty space between detail rows.
- try to resize and reposition all detail fields so that they snap to the grid.
Best regards

TDS Certificate, Challan Payment Issue and BSR Code Issue

Hi All,
I have configured Extended withholding tax as follows and encountered some issues
1. Specify Document Type (Accounts Payable): Here I have given Document type as SA and I am able to Pay the remittance challan through Post Vendor challan transaction.
MY question is How can I update my check no. I tried to update through FCH5 But it is showing no data.
2. Form 16A Certificate: How the field Cheque / DD No (If Any) gets updated?
3. BSR Code in Form 16A: I have maintained Bank branch in FI02. and made the remittance challan through that bank.
but still my BSR Code is not updating in Form 16A.
4. Form 16A Certificate: How does the Quarter Acknowledgement No field gets updated?
Kindly provide me the solutions for the above queries.
Your inputs are very much appreciated.
Thanks in Advance
Best Regards
Shashi
Edited by: shashi mantripragada on Apr 7, 2010 9:43 AM
Edited by: shashi mantripragada on Apr 12, 2010 2:13 PM

Hi,
Please check entries in the number ranges that needs to be maintained for WT certificates.
Financial Accounting (New) - Financial Accounting Global Settings (New) - Withholding Tax - Extended Withholding Tax - Posting - India - Withholding Tax Certificates for Vendors and Customers - Maintain Number Ranges
And also check its assignment.
Hope this helps.
Vikas.

Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

Effective December 13, Adobe disabled the activation server for CS2 products and Acrobat 7 because of a technical glitch. These products were released over 7 years ago and do not run on many modern operating systems. But to ensure that any customers activating those old versions can continue to use their software, we issued a serial number directly to those customers. While this might be interpreted as Adobe giving away software for free, we did it to help our customers.
If your software is affected by the activation server shut down then you will receive an error that the Activation server is unavailable. The specific affected products are as follows:
Acrobat 7.0 - Windows
After Effects 7.0
Audition 3.0
Captivate 1.0
Contribute 2.0
Contribute 3.0
Creative Suite 2.0
Director MX 2004
Dreamweaver MX 2004
Fireworks MX 2004
Flash Paper 2.0
Freehand MX
GoLive CS2
GoLive 9.0
Illustrator CS2
InCopy CS2
InDesign CS2
Macromedia Studo MX 2004
Photoshop CS
Photoshop CS2
Photoshop Elements 4.0
Photoshop Elements 5.0
Premiere Pro 7.0
Production Studio Premium
The activation server being shut down will not affect currently installed and activated Adobe software. You will only face this difficulty if you need to reactivate the software.
To remedy this difficulty we have made available a version of these software titles that does not require activation for Users who have previously purchase the affected software. For additional details and specific links to the software please see:
Error: Activation Server Unavailable | CS2 products, Acrobat 7 - http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.html
Error: Activation Server Unavailable | Macromedia branded products - http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
If the software title you have purchased is affected by the activation server being shut down, but is not available for download in the previously referenced pages, then please contact our support team at http://www.adobe.com/support/chat/ivrchat.html. Please be aware our support team will not be able to provide assistance for downloading or installing the Creative Suite 2 software.
System requirements
Creative Suite 2 software was only designed to run in the following operating environments:
Mac OS X v.10.2.8–v.10.3.8. PowerPC® G4 or G5 processor
Microsoft® Windows® 2000/Windows XP. Intel® Pentium® III or 4 processor
Extraction instructions
If you are receiving a message to insert disc two please see the following extraction instructions:
In the English version of the software the file CreativeSuiteCS2Disc2 extracts to C:\Creative Suite\Adobe Creative Suite 2.0\. CreativeSuiteCS2Disc1 and CreativeSuiteCS2Disc3 both extract to C:\Creative Suite CS2\Adobe Creative Suite 2.0\.
Please copy the contents of the C:\Creative Suite\Adobe Creative Suite 2.0\ folder to the C:\Creative Suite CS2\Adobe Creative Suite 2.0\ folder and you will no longer be prompted to insert disc two.
Additional information
Some Users have reported success getting Creative Suite 2 to install under Windows 7 64-bit. Please see http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/windows-7-is-n ot-compatible-with-adobe-photoshop/6f1b4955-7166-4b8f-ad9b-5d19150f803f for more information.
Still facing installation difficulties?
If you are experiencing an installation issue with the software currently available I would recommend creating a new thread in the Downloading, Installing, and Setting up forum - http://forums.adobe.com/community/download_install_setup. If you can please make sure to include the following:
•          What software are you trying to install?
•          Which operating system are you using?
•          Was the software previously installed prior to downloading the non-activating version currently available?
•          What specific error messages are you receiving when trying to install?
Please also see the original discussion on this topic at http://forums.adobe.com/message/4919014#4919014.

Hello Jeff.
EN version is not so eaqual in all with CZ version, I have PREMIUM one, not Standard.
So I download these EN versions and Acrobat 7Pro separately.
It look that it works, I have it installed on my presentation laptop. I ussualy work on PC and laptop is for bussines trips mostly.
When I was working on my PC I found in menu one interesting option. I have installed CS2 in 2010 so it works OK, still in CZ. What I found in menu is called "Licence Transfer".
I didnt try it because I dont want to loose my activation on PC, but could you please say to me what does this option means?
Is it possible to copy licence on flash disk and use it on laptop, but it still be in PC also? Or it is only for deactivation, so you will loose it, and after this you can do new activation (which is impossible by server shut down)?
And one question to the end, if I buy some later version like CS4 or CS5 (from some graphic studio which have one licence to sell-transfer) so do Adobe plan to shut down server too, for CS4, CS5 or after this non user/customer friendly solution (I mean for CS2) will Adobe do some application which we can install on our local PC and this app will say to CSxx "Your licence is OK, just continue in work" ?? --- this would be much better, I think if Adobe do this so it will be the same like no-activation versions in EN only but without so many complains and impacts on your customers.
Thank you for reply me

Re: Activation Server shut down for Creative Suite 2, Acrobat 7 and Macromedia products

Software : Adobe Encore DVD 2.0 / UK, purchased october 24, 2006
Operating system : Windows XP home edition / SP3 Computer : Pentium 4 / 1,8GHz - 512 MB
Other software : Adobe Premiere 6.5 / Photoshop Elements 5.0 / QuickTime 7, etc.
My harddrive crashed and I lost all my software. I had to reinstall. Everything is okay now but when I activate Encore DVD 2.0, I get the message "Activation server shut down for ........." I searched for the free download (without activating) of the CS 2 Premium, but I cold not find it. I only found the normal CS 2.
Who can help me.

If what you want is not at this link, http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l that would indicate that Adobe did not provide a special version

Still having fan issues and kernel task issues

   Hi there, I got a iMac Late 2013 model, 8 GB RAM, 2.7 GHz Intel Core i5, Running Mac OS X 10.10.1. I have had issues in the past with this the Fan running for no reason on this computer. I read numerous articles about this on the web and most said to do a SMC reset and also that certain cables (USB) may cause this. I recently did and SMC, repaired permissions, ran daily/weekly/monthly scripts. Yesterday computer was fine, this morning the fan is going full blast and in activity monitor it says Kernel_task 300+% CPU, CPU time 22:32:14:55. Anyone have any thoughts on this as to why this continues or what I am missing here. Really gets annoying to shut down, SMC restart then good for a day or so. Thanks in advance
        This was originally an old post from a couple months ago and I;m bringing it back to life here as the issue still persists.   Any help is greatly appreciated.

EtreCheck rain after I posted first message
Problem description:
kernel task using up CPU and fan running high
EtreCheck version: 2.1.6 (109)
Report generated January 25, 2015 at 9:05:09 PM CST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Technical Specifications)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris Pro
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 0:48:54
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (727.11 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/VPNAreaChameleon.app
[not loaded] foo.tap (1.0) [Support]
[not loaded] foo.tun (1.0) [Support]
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.plex.plexconnect.auto.plist [Support]
[running] com.plex.plexconnect.bash.plist [Support]
User Launch Agents: ℹ️
[invalid?] net.tunnelblick.tunnelblick.LaunchAtLogin.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Plex Media Server Application (/Applications/Plex Media Server.app)
OpenPlex Application (/Applications/OpenPlex.app)
Internet Plug-ins: ℹ️
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 Mismatch! Adobe recommends 16.0.0.287
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.30317.0 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Time Machine: ℹ️
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 272.23 GB
Destinations:
My Book Thunderbolt Duo [Local]
Total size: 6.00 TB
Total number of backups: 14
Oldest backup: 2014-11-24 05:00:26 +0000
Last backup: 2015-01-10 14:44:33 +0000
Size of backup disk: Excellent
Backup size 6.00 TB > (Disk size 999.35 GB X 3)
Top Processes by CPU: ℹ️
      5% WindowServer
      1% AppleSpell
      0% cloudpaird
Top Processes by Memory: ℹ️
146 MB com.apple.WebKit.WebContent
129 MB mds_stores
77 MB Safari
77 MB Mail
69 MB WindowServer
Virtual Memory Information: ℹ️
4.30 GB Free RAM
2.97 GB Active RAM
516 MB Inactive RAM
807 MB Wired RAM
1.18 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Jan 25, 2015, 08:17:02 PM Self test - passed

IPhoto deleting issues and iTunes syncing issues with IOS 5 on my iPhone.

While upgrading to IOS 5 my iphone (3gs) would not allow me to restore to back up so I had to restore to original settings, ugh, losing everything on my iphone. Thought this wouldn't be a problem but iTunes won't let me pick and choose what music I want to add anymore even though I have "pick checked music only" checked. It refers now only to full albums, etc, instead of whatever songs I want from each album. I had to create specific playlists with all the music I wanted on my iphone. And it only added one playlist. I have loads of space on my iPhone so don't know what the issue is. Does anyone know why I cannot add more than one playlist?
Also, I discovered I can't delete iPhoto pics on my iphone. I can trash whatever I add to my Camera Roll but nothing else. I had to designate a specific folder for pictures from iphoto to be added to iphone and those I cannot delete. Anyone know what to do here as well?
Thanks!
Found answer to iPhoto question here: https://discussions.apple.com/message/7636294#7636294
...but still need help with music. thanks

It's inside the iPhoto Library package. Open it from the Finder as show in this screenshot:
Then drag the iPod Photo Cache folder to the Trash, close the package, launch iPhoto and try again.
OT

DV7-6c90us 2nd hard drive issues and AMD Radeon Issues

The Problem:
1)My AMD card has always been flakey and I've tried multiple times to uninstall it permanently and can't, it won't let me. I want to remove it completely since I'd rather have access to the extra hard drive than the graphics card.
2) when the card is working then my 2nd HDD won't work, but when the AMD card isn't working then my 2nd HDD works
What I'm Working with:
HP DV7-6c90us
Intel Core i7 2670qm chip
16GB of RAM (I added them, Kensington 1666MHz system underclocked to 1333MHz since that's what the i7 maxes out at)
Then whatever obscure AMD Radeon graphics card came with my system.
Windows 8 Pro
2nd HDD is a 1TB Segate Momentum drive, I pretty much took it from a Travel Drive and put it in my latop
Using the standard power brick that came with my laptop (120W) and battery is almost always at 50% or better)
The laptop is just over a year old (got it 06/08/2012 from HH Gregg)
What I've done:
Checked to make sure the 2nd HDD is installed correctly, it is and is plugged in to port two. It shows up in BIOS, but when you try to test it BIOS hangs. It's not corrupt since when it does decide to work, it works without any issues. It even works when I plug in my USB 3.0 adapter and use it as an external drive. That's not really an option since I am constantly transfering and managing that hard drive so it would be too much of an inconvenience.
I tried uninstalling AMD Radeon completely, but can't. I used a site that showed me what to delete from registry, Program File (x86), User App Data (Local and Roaming), and tried to uninstall it through "Programs and Features" under Control Panel (the Catalyst software). At every reboot it comes back like a virus. I don't need it, nor do I want it since the performance is so spotty and has always been, I do need the 2nd hard drive working again since i use it much more than I do AMD.

Huffer wrote:
You will not like the answer but RAID is not possible on that machine. HP does have RAID function on some of the business models but the Pavilion is a consumer model and they have never had a RAID option on consumer models that I know about. Even if you could set up a RAID-0 array it would wipe out the data on the first drive and you would have to reinstall Windows from scratch and when you do a RAID-0 even on machines that permit it the two drives generally need to be identical, not just similar or the same size.
how is it then that some hp models ship with 2 HDD's but show up as one then eg there is a pavilion that is almost identical to mine sorry i don't know the model # but even more recent there are envy models that have this. or do they actually show as separate drives?

X-Fi XtremeMusic MIDI recording issues and other SoundFont issues

I am attempting to record output from the MIDI synthesis through "What U Hear", but seem to be getting periodic pops. This is while recording at 24/48 - the problem is much worse at 24/96; I get a constant scratchy noise or silence until I stop recording. Note that I am in "Audio creation mode" at this stage.
Additionally, I have found that while having 3rd party SoundFonts loaded and playing a MIDI file, I experience the following issues - missing notes and percussion and notes playing with with the wrong pitch.
Is anybody else experiencing these issues? I am using the latest 1187 drivers.
Cheers

DSM wrote:
I am having issues with the balance of the input signal from my turntable to my Elite Pro. The turntable in connected to Aux 2 with the switch on the console in the phono position. The signal from my turntable (B&O RX2) is slightly off balance with the left channel signal slightly higher than the right channel. I have attempted to use the Master Auxiliary Balance control in audio creation mode to balance the signal during recording. Unfortunatly I have not been able to make it work as adjusting the balance control has no impact on the recorded signal. I have worked with Creative and to date they have not provided a working solution. I have moved my card from one slot to another, uninstalled and reinstalled the software on numerous occasions and taken every step suggested by Creative. I have an ASUS A8N SLI Premium motherborad. Creative thinks the board may be the issue. Does anyone have any suggestions?
- old cardridge/stylus being worned out,
- weak connectors/connections,
- too light stylus pressure (try 2-3 grams),
- dirty/dusty stylus,
- mispositioned stylus (not straight, wrong 'arm'length (if adjustable),
- wrong connection imbedance,
You can also try if connecting turntable through amplifier (w/ RIAA) to X-Fi Line-In makes any difference --> shows out, if the RIAA pre in X-Fi is not working properly.
jutapaMessage Edited by jutapa on 09-05-2006 0:30 AM

BPEL Installation Issues and Eclipse Plugin Issue

I'm trying to evaluate BPEL and encountered the following issues:
(1) Installation of patch 4343748:
MISSING_COMPONENT : oracle.j2ee, 10.1.2.0.0
This Oracle Home does not have components/versions required by the patch.
ERROR: OPatch failed during pre-reqs check.
OPatch returns with error code = 150
The other 2 patches installed fine.
Is there a required order for installing the patches. The information that I found is a bit spotty on that.
(2) The Eclipse Plugin also doesn't work properly. The following stack trace is reported back, when trying to open a .bpel file:
java.lang.NullPointerException
     at bpelz.browser.OleWebBrowser.registerAsDropTarget(OleWebBrowser.java:345)
     at bpelz.browser.OleBrowserView.createBrowserControl(OleBrowserView.java:168)
     at bpelz.browser.OleBrowserView.createPartControl(OleBrowserView.java:75)
     at bpelz.views.SimpleBrowserView.createPartControl(SimpleBrowserView.java:55)
     at bpelz.views.PaletteView.createPartControl(PaletteView.java:64)
     at org.eclipse.ui.internal.ViewReference.createPartHelper(ViewReference.java:305)
     at org.eclipse.ui.internal.ViewReference.createPart(ViewReference.java:180)
     at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552)
     at org.eclipse.ui.internal.PartPane.setVisible(PartPane.java:283)
     at org.eclipse.ui.internal.ViewPane.setVisible(ViewPane.java:512)
     at org.eclipse.ui.internal.presentations.PresentablePart.setVisible(PresentablePart.java:126)
     at org.eclipse.ui.internal.presentations.util.PresentablePartFolder.select(PresentablePartFolder.java:268)
     at org.eclipse.ui.internal.presentations.util.LeftToRightTabOrder.select(LeftToRightTabOrder.java:65)
     at org.eclipse.ui.internal.presentations.util.TabbedStackPresentation.selectPart(TabbedStackPresentation.java:391)
     at org.eclipse.ui.internal.PartStack.refreshPresentationSelection(PartStack.java:1102)
     at org.eclipse.ui.internal.PartStack.setSelection(PartStack.java:1051)
     at org.eclipse.ui.internal.PartStack.showPart(PartStack.java:1256)
     at org.eclipse.ui.internal.PartStack.createControl(PartStack.java:576)
     at org.eclipse.ui.internal.PartStack.createControl(PartStack.java:528)
     at org.eclipse.ui.internal.PartSashContainer.createControl(PartSashContainer.java:485)
     at org.eclipse.ui.internal.PerspectiveHelper.activate(PerspectiveHelper.java:230)
     at org.eclipse.ui.internal.Perspective.onActivate(Perspective.java:813)
     at org.eclipse.ui.internal.WorkbenchPage.setPerspective(WorkbenchPage.java:2928)
     at org.eclipse.ui.internal.WorkbenchPage.busySetPerspective(WorkbenchPage.java:902)
     at org.eclipse.ui.internal.WorkbenchPage.access$11(WorkbenchPage.java:887)
     at org.eclipse.ui.internal.WorkbenchPage$12.run(WorkbenchPage.java:3051)
     at org.eclipse.swt.custom.BusyIndicator.showWhile(BusyIndicator.java:69)
     at org.eclipse.ui.internal.WorkbenchPage.setPerspective(WorkbenchPage.java:3049)
     at bpelz.wizards.BPELProjectCreationOperation.switchToBPELPerspective(BPELProjectCreationOperation.java:204)
     at bpelz.wizards.BPELProjectCreationOperation.run(BPELProjectCreationOperation.java:144)
     at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:346)
     at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:291)
     at org.eclipse.jface.wizard.WizardDialog.run(WizardDialog.java:830)
     at bpelz.wizards.BPELProcessWizard.performFinish(BPELProcessWizard.java:207)
     at org.eclipse.jface.wizard.WizardDialog.finishPressed(WizardDialog.java:676)
     at org.eclipse.jface.wizard.WizardDialog.buttonPressed(WizardDialog.java:349)
     at org.eclipse.jface.dialogs.Dialog$2.widgetSelected(Dialog.java:556)
     at org.eclipse.swt.widgets.TypedListener.handleEvent(TypedListener.java:90)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3080)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2713)
     at org.eclipse.jface.window.Window.runEventLoop(Window.java:809)
     at org.eclipse.jface.window.Window.open(Window.java:787)
     at org.eclipse.ui.actions.NewProjectAction.run(NewProjectAction.java:114)
     at org.eclipse.jface.action.Action.runWithEvent(Action.java:996)
     at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:538)
     at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:488)
     at org.eclipse.jface.action.ActionContributionItem$5.handleEvent(ActionContributionItem.java:400)
     at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:66)
     at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:843)
     at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3080)
     at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:2713)
     at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:1699)
     at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1663)
     at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
     at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
     at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
     at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
     at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
     at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
     at org.eclipse.core.launcher.Main.run(Main.java:973)
     at org.eclipse.core.launcher.Main.main(Main.java:948)
Any advice on how to proceed is much appreciated.
Andreas

I'm still hoping to find an answer on why the Eclipse BPEL Designer does not work for me. I can generate a BPEL project but the visual BPEL Editor will just not open up. Any clues on what I should be looking at would be very appreciated.
Here is the exact Eclipse version that I'm using:
Version: 3.1.0
Build id: I20050627-1435
And another stack trace that is seen in the Eclipse error log:
org.eclipse.jface.util.Assert$AssertionFailedException: Assertion failed:
at org.eclipse.jface.util.Assert.isTrue(Assert.java:180)
at org.eclipse.jface.util.Assert.isTrue(Assert.java:165)
at org.eclipse.ui.part.MultiPageEditorPart.setActivePage(MultiPageEditorPart.java:579)
at org.eclipse.ui.part.MultiPageEditorPart.createPartControl(MultiPageEditorPart.java:244)
at org.eclipse.ui.internal.EditorReference.createPartHelper(EditorReference.java:585)
at org.eclipse.ui.internal.EditorReference.createPart(EditorReference.java:365)
at org.eclipse.ui.internal.WorkbenchPartReference.getPart(WorkbenchPartReference.java:552)
at org.eclipse.ui.internal.EditorAreaHelper.setVisibleEditor(EditorAreaHelper.java:258)
at org.eclipse.ui.internal.EditorManager.setVisibleEditor(EditorManager.java:1216)
at org.eclipse.ui.internal.EditorManager$5.run(EditorManager.java:944)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.ui.internal.EditorManager.restoreState(EditorManager.java:939)
at org.eclipse.ui.internal.WorkbenchPage.restoreState(WorkbenchPage.java:2535)
at org.eclipse.ui.internal.WorkbenchWindow.restoreState(WorkbenchWindow.java:1819)
at org.eclipse.ui.internal.Workbench.doRestoreState(Workbench.java:2566)
at org.eclipse.ui.internal.Workbench.access$14(Workbench.java:2515)
at org.eclipse.ui.internal.Workbench$19.run(Workbench.java:1514)
at org.eclipse.ui.internal.Workbench$16.run(Workbench.java:1263)
at org.eclipse.jface.operation.ModalContext.runInCurrentThread(ModalContext.java:346)
at org.eclipse.jface.operation.ModalContext.run(ModalContext.java:291)
at org.eclipse.jface.dialogs.ProgressMonitorDialog.run(ProgressMonitorDialog.java:447)
at org.eclipse.ui.internal.Workbench.runStartupWithProgress(Workbench.java:1258)
at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1512)
at org.eclipse.ui.internal.Workbench.access$12(Workbench.java:1491)
at org.eclipse.ui.internal.Workbench$17.run(Workbench.java:1374)
at org.eclipse.core.internal.runtime.InternalPlatform.run(InternalPlatform.java:1044)
at org.eclipse.core.runtime.Platform.run(Platform.java:783)
at org.eclipse.ui.internal.Workbench.restoreState(Workbench.java:1318)
at org.eclipse.ui.internal.WorkbenchConfigurer.restoreState(WorkbenchConfigurer.java:183)
at org.eclipse.ui.application.WorkbenchAdvisor.openWindows(WorkbenchAdvisor.java:700)
at org.eclipse.ui.internal.Workbench.init(Workbench.java:1034)
at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:1636)
at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:367)
at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:143)
at org.eclipse.ui.internal.ide.IDEApplication.run(IDEApplication.java:103)
at org.eclipse.core.internal.runtime.PlatformActivator$1.run(PlatformActivator.java:226)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:376)
at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:163)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.eclipse.core.launcher.Main.invokeFramework(Main.java:334)
at org.eclipse.core.launcher.Main.basicRun(Main.java:278)
at org.eclipse.core.launcher.Main.run(Main.java:973)
at org.eclipse.core.launcher.Main.main(Main.java:948)
Thanks,
Andreas

8520 Email Setup Issues and App Download Issue

Hey there
I got my first Blackberry ever yesterday. I've been wanting one for years but I finally got it and I cannot set up my email or download any apps.
Each time I got to setup the email the only option is 'I want to use a work email account with a Blackberry Enterprise Server'
But I don't. And I know to download apps you have to download the app world. I did it via the desktop but apparently my phone is compatible?
I'm so confused and I don't know who to ask to help me.
Thanks

Hi and Welcome to the Forums!
To use the proprietary RIM Push email capability, you must have an adequate data plan from your carrier. The carriers host BIS for their BB users. Typically, BIS is not available via generic data plans. Many carriers call what is necessary The Blackberry Data Plan. Whatever they call it, it is the carrier who delivers BIS to their BB users -- contact them for assistance. Once you have a BIS-capable data plan on your BB (at whatever fees your carrier will charge, btw), you will then have Personal Email added to the email setup wizard.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Hibirnation issue and Think Vantage issue

My laptop:
T410
Windows 7 64bit Pro
ThinkVantage is up to date
I have 2 issues,
1- When I put my laptop on hibernation after x amount of hours it just starts by himself.
2-The Think Vantage toolbox show me that my antivirus is not up to date and not activated but he is. All updates are done on my antivirus.
Can anybody help?
Thanks

http://forums.lenovo.com/t5/ThinkVantage-Technologies/Lenovo-ThinkVantage-Toolbox-says-Kaspersky-is-...
Have a look there the question was already asked.
Knowledge is of two kinds. We know a subject ourselves, or we know where we can find information on it.
ThinkPad T510 4313-CTO Windows 8 x64 - Intel Core i7-620M - NVIDIA NVS 3100M - 8GB RAM - 240GB SSD- Intel Centrino Ultimate-N 6300 - Gobi 2000.
ThinkPad Helix 3697-CTO Windows 8.1 x64 - Intel Core i7-3667U - Intel HD Graphics 4000 - 8GB RAM- 256GB SSD - Intel Centrino Advanced-N 6205 - Ericsson C5621gw

Unibody Macbook display issue and keyboard backlight issues while booting

I have a 13" aluminum macbook which has been having some issues when booting up. The machine seems to be booting just fine all the way up to the log in screen. The display is normal and everything seems fine. After I log in, the various pieces of the screen start to display (desktop icons, menu bar, etc) and my wallpaper is visible. After a few seconds, the display seems to degrade and the wallpaper image is visible but distorted. It is almost as if the machine is in some sort of safe mode (pardon the windows reference).
Normally, I have my macbook connected to an external display and external mouse/keyboard. After a reboot, this issue occurs. If I put the macbook in sleep mode, and then wake it by clicking the external mouse, the display reappears normally and everything is fine.
The problem is when I am NOT connected to these external devices. The screen stays distorted (like it has lost its full color range) and there are other issues. The keyboard backlight seems to be disables and highlighting text does not work normally. I have tried rebooting, removing the battery and rebooting, resetting the SMC, removing recent applications (chrome, quicklook, etc.). Has anyone heard of or experienced this behavior?
Thanks.

Have you called Applecare? If you sent the machine in and it came back with a cracked case, that seems like an Apple repair to me.
As for the display issue - I think I would accept it and move on. Unfortunately, with these ever-higher resolution displays, we have more dead pixels. Since no one would pay $3000 for a display with 100% no dead pixel guarantee, Apple has to alot for a few dead pixels being acceptable inorder to keep prices reasonable.
http://docs.info.apple.com/article.html?artnum=22194
Check with other vendors, this is common practice with LCDs (even HDTVs).
I know it isn't great to hear this, but it is what it is.
iMac G5, MacBook Mac OS X (10.4.7)
iMac G5, MacBook Mac OS X (10.4.7)
iMac G5, MacBook Mac OS X (10.4.7)
iMac G5, MacBook Mac OS X (10.4.7)

MSI H81M-E33 BIOS Issues and Post Flash Issues

Hello,
My situation is as follows: (TL:DR at bottom)
Built a new computer and decided to use the new LGA 1150 refreshed CPUs. Bought the MSI H81M-E33 Motherboard and installed windows. Noticed a problem with the rebooting even when installing windows. Thought it was just because of the windows installation, but problem persisted in which the computer seems to shut down but doesn't power down and i have to manually hold power button to power down and then push it again to start up. No real issues it seems since the computer does close processes and shut down but this was irritating me. I read online that BIOS updates seem to fix this problem. Did some research and decided to update with M-Flash to bios v6.6.
As I used M-flash to update to BIOS (selected "Select one file to update BIOS and ME") v6.6 the update stops at 47% and then the computer attempts to restart. BUT it still has the same problem and does not power down. So I manually powered down and started it back up. I then got "no signal" even as I waited. Now I'm freaking out and I power it down again and try again. This time I wait and it get to BIOS (MSI Screen) and then no signal again (not booting windows). Again I hold power down and power back on. Long wait again and I get back to bios. Still freaked out at this point but relieved I didn't brick motherboard.
Decide to flash v6.5 in case 6.6 was too new and might some problems. However v6.5 has the same problems; bios update stops at 47%, computer attempts to reboot, can't reboot, I power off, power on, no signal, power off, power on, wait a while and it gets to BIOS (MSI Screen), then boots to windows.
Right now the bios does read the bios version as v6.5 but I still have the issues in restarting where that doesn't really work. In addition, I now have this wait from pushing the power button to when I see BIOS (MSI Screen).
TL:DR
Had reboot problems decided to update BIOS
Used M-flash ("Select one file to update BIOS and ME") to update to v6.6
Update stopped at 47%, computer attempted to reboot, got no signal (reboot problem), powered off, powered on, waited a long time nothing, freaked out, powered off, powered on, waited a while got to bios (Whew), checked for new version (it is).
Decided v6.6 might be too new decided to try v6.5 used M-Flash again
Again stopped at 47%, computer attempted to reboot, got no signal (reboot problem), powered off, powered on, waited a long time, nothing, powered off powered on, waited a while got to bios, checked bios for new version (it is), save and exit, no signal, power off, power on, waited a while got to bios, then booted into windows
My concerns are;
I seem to still have reboot issue.
I have to wait for BIOS now, no longer pretty quick start.
My questions are;
Did I mess up the flashing somewhere?
Was stopping at 47% normal?
Should I try to update the BIOS another method to fix my current problems?
Am I missing a step somewhere?
Any help is appreciated, I just got really freaked out by the whole process but I'm just glad the computer still works (kinda).
Thanks in advance for any help, and apologies on the long essay just wanted to be as specific as possible.
-J
Specs:
MSI H81M-E33
Intel i5-4590
Corsair CX-430
Crucial Ballistix Sport 8GB
PNY Optima Series 240GB
Seagate Barracuda 1TB
LG 12x BD-Rom
Microsoft Wireless Desktop 2000

MFlash reboots in the process. To be sure reupdate using the below instructions and archive for a proper fpt flash. If you used Win8 feature (fastboot) before the first update be aware taht you need to set anything again after an update (e.g. enabling safeboot) as everything is set to default.
>>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive (E7817IMS_660.rar.rar) and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB
G.) Now follow the directions and let the tool flash
H.) After flashing reinstall ME drivers in Windows: http://download.msi.com/dvr_exe/intel_amt90_mb.zip

I updated to 10.6.8 now I have USB issues and external HD issues

I updated to 10.6.8 now I have an USB scandisk cruser that won't connect and a new Lace D2 external HD that doesn't auto conect during start-up

judykpete,
try visiting this Adobe page — does it show that some version of Flash is currently installed on your MacBook Pro, or does just a grey box show? If it’s the latter, then you’ll need to install Flash; instructions to do so can be found further down on that same page.

Safari 2.0.1 issues and Macromedia Producti issues

Similar Messages

Maybe you are looking for