Safari 2.0.1 - Weird download problems and wrong icons

Since updating Safari to 2.0.1 I cannot download and install programms anymore. I tried downloading the current version of Cyberduck:
http://cyberduck.ch/Cyberduck-2.5.dmg
First the download seemed to go fine, but when I copied the programm into the applications folder, it had the wrong icon (a folder icon, whereas it should normally have that duck icon) and it did not load at all. Got some error message that the file was corrupt. So I tried to download the program once more, but this time the .dmg download icon was a Flash icon, the next time it was something else... in any case the .dmg would not unpack at all. When I trashed it and tried to delete the Trash I got an error message saying that some file in there was still running. Save delete finally emptied the trash.
I then tried to download and install another programm ( a .zip file this time) and again it did not unpack.
Somewhen I realized that a lot of the icons in the finder looked blurry or simply were the wrong ones. Rebooting seemed to help at first, but when I tried to download a programm again, all went bezerk again.
Strange enough Firefox seems to have the same problems now suddenly. I'm really lost. I'm pretty new to Macs. Help much appreciated.
Cheers, Pädy

Hello Pady
You use the cd only when you need to repair the Disk also known as Disc repair. Please read the Directives in the posts carefully , so that you understand them & then apply.
To run Repair Disk permissions you go.> Utilites>Disk Utility pick your Hard Drive & pick Repair Disk Permissions, you can get info after @ the tool bar at the Info button there will be messages when it runs in the window on the Utility. Really though reread the links so that you understand. Also read as much as you can hear at Discussion, that is what I do.
Also make sure that when you post you go to the most pertinent, place to post, where you will get the most attention.
I need to get to sleep.
if you have Qs post.
Regards - Eme

Similar Messages

Weird Downloading problem

Whenever I try to download something, anything at all on safari, it does not download, it goes to a download page but then goes back to the page with the "click here to download" link. This happens on every single page I try to download things, the only way is to use software update or download from another computer then transfer. Is there some setting or firewall thing going on? I'm not sure. The problem always happens, home or at school. I'm not sure what's goin on.

Keith,
Welcome to Apple Discussions.
It sounds as if your files are actually downloading in the background. Go to: 'Window' > 'Downloads' to open the download progress window to check. If you need to locate where the files are on your mac, go to: 'Safari' > 'Preferences' > 'General' > and check where 'Save downloaded files to:' points to.
Also, try and hold the 'control' key for more options when you click to download files. ¦¬î MadMacs

Weird Video problem and kernel panic!

Okay, so last ngiht I was running tech tool maintenence, and I had repair on. So, it finished scanning my startup volume (I was on my eDrive) and then I shut down and restarted. Now, it tried to start from my startup volume (tiger 4.7, with latest updates) and it says you need to restart your computer (which means there is a kernel panic, am I right?) I try safe mode to no avail, I even reset the PMU and reset the PRAM (but I didnt hear the starup noise again). So, I put in my backup HD, and it starts up, but wait! Now the video is horribly wrong! It is all in TERRIBLE quality and in mostly only greys, I mean it looks like a 4 mb vram video card, there are very few pixels of color( there are some intermitedly) and there is terrible ghosting, and I can barely read anything. so, I checked my display, and universal access settings, and fooled around with those, and nothing happened. So, now I try and start from my eDriveand it start, but now it has the same horrible color problem as my other drive. Oh boy, this is a new computer, and I already have a kernel pnic, and a video problem, what can I do? Thanks for any help. Matthew. I have a sawtooth, a radeon 9200 flashed video card, and the latest tiger.

What if you tried running mplayer with the following command :
mplayer -fs -zoom filename
As for the "too pixelish" problem well... you could try increasing the "nice" level (at least in VLC). For the other video players I don't know.
Last edited by FizDev (2007-11-01 02:50:28)

Weird Print problems and conversion to PDF problems...

I edited a logo in Illustrator for a hat using spot colors. 3 colors total. I saved as illustrator and then placed in InDesign for sizing. I printed it and some of the color didnt show up. So I figured it was the spot colors screwing with our printer. I printed again, but this time, in the ink manager of the print dialogue, I converted all spots to process. That substantially changed the colors in the image. I saved to PDF and then opened in Photoshop, and I get missing color plus changed color. Whats up? Looks great on screen when in Illustrator, and placed in InDesign.. but when It prints or is converted to PDF and opened in Photoshop, it goes to hell.
All Creative Suite 2 files on a Mac

Yep.. it's an overprint issue. When I open the PDF, the overprint version is all screwed up... and over print preview OFF looks fine.
Why is overprint doing anything? I dont intentionally do anything with overprint..I dont really know what overprint is, let alone want anything to do with overprint. I want whats on screen to print...
Chris

After upgrading to Yosemite I cannot download updates and the icons are not question marks.

I upgraded from Mavericks to Yosemite, I cannot download any updates for apps and cannot purchase apps. When I go to the app store all the icons are have question marks in them. Any ideas on what I can do to fix this problem?

Repair permissions & restart your comp.

Automatic download problem - syncs wrong Apple id

I have 3 Apple Id's , I'm trying to enable automatic downloads on my IPad. Problem is when I switch to on inside settings one of the three apple id's comes up asking for the password. Trouble is the id that comes up is for my ITunes Connect account and is NOT for my personal account associated with my ipad. Once I saw that the wrong account was displayed I went ahead and entered the password for that apple id but the Ipad msg says that its the wrong if for this IPad. I need to be able to have my IPad sync with my personal id.
Any help?
R

in Settings - iTunes Store and App Store tap your account name and sign off. Sign back in with a correct account. Try again.

Downloading Look and Feel icons

I've downloaded the look and feel repository, which unzips to a jar file, that seems to do nothing when I run it. When training in Java we downloaded folders of gif files with button graphics on them, where can I find these?
Thanks Derek

Go ahead and unzip the jar file. A jar file is the same as a zip file, so you can unzip it. It should have all the icons in it.

I bought and downloaded pages and the icon was on my screen. It is now gone and i can't find it. Help!!

I need help finding my Pages download. I am new to Mac, I've always owned PC's. When i go to the app store it confirms that I downloaded Pages last night. I was actually trying it out last night. Today the icon is gone and I don't know where to find it.

ralph from el dorado hills wrote:
lvmedic3214,
Thank you, that worked. do you know how i can make it stay as an icon with the rest of the icons?
Or, While Pages is running, click and hold the Pages icon on the Dock and select Options > Keep in Dock.
Jerry

Weird audio problem during calls

I have a weird audio problem and was wondering if anyone else has had a similar problem or could help...
My wife and I both have iPhone 5's and sometimes (not all the time) when she calls me (or I call her), it connects, but no matter which audio input I choose (phone, bluetooth, speaker, headphones), I cannot hear her, but she can hear me... I hang up, call back (and when I call, there is no dialing sound, nor any other phone sounds) and it's the same thing. Sometimes restarting the phone works, other times I have to restart it 3-4 times before it'll work again. I try different things during these calls, like turning on/off bluetooth and/or wifi (pretty much anything I can think of that would make a difference), but nothing seems to help.
The (other) weird part is that after the last time of this happening, I tried calling my iPhone with my office phone and it worked fine, so then I immediately call my wife back with my iPhone and it was doing the same thing again. I called her back using my office phone and could talk to her fine...
This problem has been going on for a few months now and I have tried restoring the phone a couple times (and I am on the latest iOS) and sadly, that hasn't done anything to help... Does anyone have any ideas what is going on? I'd make an appointment for the problem, but since it doesn't do it all the time, I don't know what good it would do... But it is getting very frustrating!
Thanks for any help!
-Jason

Thanks for the response! It happened again yesterday... It seems to be happening more frequently in the past few weeks now.
I checked the link and have tried all of the things listed at one point or another over the past few months. I did just check my Carrier settings and it said it had updated (it's on 14.1), but I am not sure when that happened (could have been today, could have been after my last restore last week, not sure). I'll keep my fingers crossed that maybe that fixed it...
If it continues to act up, would you recommend that I bring the phone in to an Apple store or an AT&T store? I bought the phone through Apple, but my carrier is AT&T (and if you suspect that the problem may be with the cellular conection), maybe the AT&T store would be the better choice?
I really wish the problem would be more consistant or go away, cause trying to get the problem solved is driving me crazy!

Downloading problem facing sometime

sometime we facing adobe flash player downloading problem and tried many times retry but not seccess so pelase resolve this issue thanks http://www.iteducations.com

Moving the discussion to the Adobe Flash Player Forum.
Regards
Anit Kumar

KT6V Weird boot problems

Hi..
I'm having this weird boot problem (and no it doesn't seem to be the standard one)
OK..
I have the following :
AMD Athlon 2000+
KT6V LSR mainboard
2x 256 Crucial PC2700 memory
IDE Hard Disk (120gb segate)
Creative 5700ultra Graphics card (AGP)
Cd Rom
Chieftec 400w PSU
WinXP Pro
If I set my CPU FSB to 100mhz (everything else on auto).. win Xp pro boots fine and all is pretty good except that my chip is now seen as a lowly 1.25ghz..
If I then set my CPU FSB to 133 or 166 then the machine boots (ie it beeps etc..).. starts to load windows xp (I get the logo and that's when the problem happens) and either black screens (ie.. nothing and the monitor turns off) or blue screens with the windows message saying that windows has detected a hardware fault and has halted the system..
I know my memory, chip, heatsink etc all work because just over an hour ago they all worked fine in my KT3 ultra.
What is going on as I've tried almost everything to try and solve this, with the only option to set the FSb to 100mhz which is incorrect for my CPU.
How do I fix this.
I've looked through the forum but this is not the same problem as simple reboots.. this is weird.
If I can't fix this then I guess it'll be send it back.. which is a shame because I like MSi motherboards.
Thanks
Slippery

Hi..
I've checked the CPU heatsink.. and nothings wrong !
(Can't check the voltage but I know the PSU is Ok as I did run it in a custom case with 4 Cd writters, 4 HDs, loads of lights etc.. before I moved to this new plain case tonight)
What's weird is that set at 100FSb it's fine but at 133 or 166 it just crashes after the loading XP logo is displayed. Up until that point it's all fine.
But why does it run Ok at 100mhz and not 133mhz ?
Please help.. before I end up fixing this with a hammer !
Thanks
Slippery

Safari 3.0.4 window close button and Command W not working

Just upgraded to 10.4.11 and Safari 3.0.4, now I cannot close any Safari windows either by the Red button or command W. I am running a Powerbook G4. I had the same problem with previous beta versions of Safari.

I was also experiencing this problem, and removing the library/input managers/SIMBL fixed it. But I dug a bit deeper, and found out that SIMBL looks in library/application support/SIMBL/plugins. I found a file in there called Taboo dated 5/8/2005 and removed it. Problem solved, even with the SIMBL files in the input managers folder.
Hope this helps.
Paul

HT4628 I am able to download updates and send and receive email so I know I have connection to my wireless router. However, when I click on Safari, I get the message "Safari quit unexpectedly." What is my problem and how do I solve?

When I click on Safari, I get the message "Safari quit unexpectedly." I know I have access to my wireless net work because I just found and downloaded updates and can send and receive mail. What is my problem and hoe is it solved?

As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Firefox downloads "failed". Have reset FF, been through "downloading problems" trouble doc, and uninstalled/reinstalled FF w/o luck. Safari is able to download.

Recently I am unable to download anything in FF. It briefly acts as if downloading, but the file is corrupted and the next to the file in the DL manager it just says "Failed".
I tried Resetting FF. No luck.
Then I tried all the steps in the "downloading problems" support doc. No luck.
I tried with all add-ons disabled. No luck.
In desperation, I searched for "Firefox" and moved two folders called Firefox, the application, and a .plist file to the trash (still there) and redownloaded Firefox and reinstalled. No luck.
If I click on a .pdf it will be be viewable, but it won't download. It's not just .pdfs that fail, it is any file I try and download.

I have the same problem and I also tried a lot of troubleshooting advices without any success.
The problem seems to be with OS X Parental Control turned on and using a other account than the one of the admin.
The user sl-nw found a short-term solutions (changing back to version 31, working like a charm or turning off Parental Control), yet a long-term solution is needed:
https://support.mozilla.org/en-US/questions/1018279
Perhaps Firefox should add a bug fix to their next update.

Safari 2.0.1 - Weird download problems and wrong icons

Similar Messages

Maybe you are looking for