Safari 2.0.4 doesn't like overflow hidden

My Safari version 3.0.4 (523.12.2) working as expected; having problems with 2.0.4 and later.
I have a flash container that opens over the rest of the page and then collapses back into a smaller space. The html area that my flash movie floated over when it was opened is no longer clickable after collapse. I called a javascript function from flash to collapse the div back to its original state and it works in all browsers except Safari 2.0.4 and later.
The one line called in the javascript function:
document.getElementById('divname').style.overflow="hidden";
Only problem is Safari version 2.0.4 and later do not appear to support this, yet all the documentation says it should not be an issue. Does any one have any suggestions on getting around this issue?

Oh right... nothing happens when you rollover the buttons that were once under the flash movie that expanded; the hover and click do not work. I tried a z-index fix, but it slides my movie back behind the other components on the page and then is no longer visible. The overflow hidden fix works on all browsers except Safari 2 and later for some reason. It's quite bizarre.
Thanks!

Similar Messages

In the Safari browser on Facebook doesn't appears the symbol of the video call. What can I do?

In the Safari browser on Facebook doesn't appears the symbol of the video call. What can I do? I'm Italian.
Nel browser di Safari su Facebook non mi appare il simbolo per videochiamare. Cosa posso fare? Sono Italiano.

If you are using the Creative cloud app to do the install in the upper right hand corner there is a Gear looking icon. Click on that and select preferences then go to the Apps tab and you can select which drive any and all Adobe software installs to. I suggest you included the folder also. Mine look like this.
D:\Programs Files\Adobe
All the creative Cloud Apps then get installed to the D drive in the Program Files folder in a Sub-folder called Adobe. They are then installed to another Sub-folder for whichever program they are, IE Photoshop, Bridge, Lightroom and so on.
If you are installing the Stand Alone versions then at one point during the initial install system you are given a choice to do a Custom or Advanced install and you have to choose that option then you can select which drive and folders to install to.

Uninstalling Safari on Lion, or a LeechBlock-like extension for Safari?

Hi all,
Hoping for some site-blocker advice
I use Firefox exclusively on my Mac in order for the LeechBlock add-on to be effective (having other browsers that circumvent the block kinda defeats the purpose of having a site blocker). In the past, I just deleted Safari from my Mac and everything was dandy. Now that I've recently upgraded to Lion, it refuses to let me delete Safari, and I've been told Safari doesn't have a LeechBlock equivalent.
Is there a way to get rid of Safari, or better yet, a LeechBlock-like Safari extension that I can install?
Thanks so much for any help!
-DD

Apparently there is one solution. You can install the extension "WastNoTime". It is as good as Leechblock.
For that you have to go to Safari preferences and turn on extensions. You can then download and install the extension from this link: http://bumblebeesystems.dyndns.org/wastenotime/ or you can browse https://extensions.apple.com/ and find it under productivity category.
I am happy that this extension is finally out. I was almost moving to Firefox.
Good luck

Safari show all tabs doesn't work all the time

It is annoying: safari show all tabs doesn't work all the time. The little icon to the right of the "New Tab" area sometimes works, and sometimes doesn't. The Shift Command Back-slash, sometimes works, and sometimes doesn't. I find no rhyme nor reason for this. I have a MacBook Pro, Mountain Lion, the latest updates. It doesn't matter if I am in Full Screen or not.
I am quite confused regarding this.

Open the Finder. From the Finder menu bar click Go > Go to Folder
Type of copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that helped, empty the cache more often from your keyboard.
Command + Option + E

My Safari icon/app is missing. I How do i get it back? I try settings - general - restrictions - safari - off / on but doesn't work

My Safari icon/app is missing. I How do i get it back? I try settings - general - restrictions - safari - off / on but doesn't work

First, it might be you simply put Safari in a folder somewhere. Try searching for it using Spotlight. Drag down on the screen to display the Spotlight search bar and type "Safari". If you see Safari, it is still accessible on your iPad. If not, try the following.
Reset your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears. Try again to see if the problem persists.
Finally, if that doesn't help, try turning off restrictions, then turning them back on.

How do i put a mobile number in on numbers '09? like 0414441472. Doesn't like 0 at the front. Thanks

How do i put a mobile number in on numbers '09? like 0414441472. Doesn't like 0 at the front. Thanks

Ed,
There are a number of ways to do this. Your phone number consists of all numerals, yet isn't a numeric value, but rather a text value. Numbers doesn't know that, so it treats it as a numeric value and strips off what it feels is an unnecessary leading zero.
You have there options:
Format the cells as Text prior to making the entry.
Leave the cells as a Numeric value format, but choose Custom Format to set the number of displayed places and choose to display leading zeros.
Use the Numeral System Format and set it to base 10, displaying 9 digits, or whatever you need.
There are ways to convert a number to text and add required leading zeros with a formula too, but it's needless work.
Jerry

Safari copy url button doesn't work

I just upgraded from an ipad2 to an iPad air 2. Before, if I wanted to copy and paste a url I'd use the copy button. Now,on the new iPad air 2, the copy button just wipes out whatever I've previously copied, and doesn't copy the url.

You tap and hold down in the URL field until you get the option to select all. Then you choose the option to select all. An option to Copy appears and you select that and then you should be able to paste that URL into a text field.
Safari copy url button doesn't work
I Realize that you must know the steps but I am just double checking. If that is not working for you, and you are not having copy and paste issues elsewhere in other apps, I would try clearing Safari, force close it and then reset your iPad.
Go to Settings>Safari>Clear History and Website Data
Now force close Safari. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Safari 2.0.3 doesn't "remember" My Yahoo login, more

For the last few days, even though I have "remember me" checked in my "My Yahoo!" home page, every time I exit Safari and reopen it, i get the My Yahoo sign up page. Same goes for Amazon 1-click, Google preferences, VersionTracker's log in, etc.
I spent an hour on the phone yesterday with an Apple technician, and we deleted cache's plist files, reset Safari - all to no avail.
Today I created a new user, and set up My Yahoo to be remembered as my home page, quit, then reopened. Took me to the log-in page again!
Is this a 2.0.3 problem? I'd hate to have to do another archive and install.
Also, Safari freezes quite a bit since the update. I guess I'll have to use Firefox for now until there's a fix.

This just now happened to me as well.
Ever since downloadig the Safari update, it's been crashing like crazy, and today was the first time Yahoo didn't "remember me"!
Something is definitely screwy with this update, as Safari is crashing constantly, and Mac Mail is as well....

MP3-Library doesn't like some of MediaSource's ID3 t

Just a tip for MP3-Library users:
On rare occasions, MediaSource 3.30.2 will produce an ID3 tag that MP3-Library doesn't like. (This is pretty rare -- out of 45 tracks I updated the tags on, 6 did this.) This results in the file being displayed as corrupted. If you select "Analyze/Fix MP3," it finds a frame or two with random specifications at the very start of the file, followed by a single bad frame, and then all good frames.
If you check all availiable fix options (delete selected frames [check the junk and bad ones], delete garbage before st frame, delete garbage after last frame), it lops about 30 bytes off the end of the tag/header and takes a few good frames off the start of the file.
According to MP3Utility and EncSpot, there's nothing wrong with the files, and they play just fine in MediaSource, Winamp, and on the Zen. The header data that was destroyed doesn't affect the ID3 data. It only seems to have removed the Xing header. (No, I don't use Xing. LAME 3.97 alpha puts Xing-compatible headers on its VBR files.)
The following are the summary data that MP3Utility shows. This is from the original file, fresh out of LAME:
File size: 3,63,232 bytes
Offset to first frame header: 2,630 bytes
MPEG version .0; Layer III
Bitrate: VBR (Xing); Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 47 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 8,945
Estimated time: 3:54 (234 secs.)
This is after importing the file into the PC Music Library and clicking "Update Tag." I didn't modify anything, just told it to re-write the ID3 tag:
File size: 3,63,232 bytes
Offset to first frame header: 2,630 bytes
MPEG version .0; Layer III
Bitrate: VBR (Xing); Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 47 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 8,945
Estimated time: 3:54 (234 secs.)
And this is after MP3-Library "fixed" it:
File size: 3,629,325 bytes
Offset to first frame header: 2,600 bytes
MPEG version .0; Layer III
Bitrate: 224 kbps; Sample rate: 44,00 Hz
Channel mode: Joint stereo
Private: No; CRCs: No; Copyrighted: No
Original: No; Emphasis: None
Frame size: ,52 samples/frame
Frame length: 73 bytes/frame (unpadded)
Pad size: byte(s)
Estimated frames: 4,96
Estimated time: 2:0 (30 secs.)
No, MP3-Library DIDN'T chop 04 seconds off the file. The estimated frame count and length are WRONG because the Xing header was destroyed by MP3-Library. This header would normally tell MP3Utility how long the file really is, otherwise it takes the bitrate of the first frame and extrapolates that over the file length. (Without this header, many programs' progress sliders won't be as accurate.)
So, if MP3-Library tells you a file is corrupted after going through MediaSource and the file wasn't corrupted before, DON'T fix it. You'll only make things worse. I've never seen MediaSource or my Zen actually damage a file.
(At first, I told it to fix 'em. Now I'm going through and restoring the backups it made.)

i have used mp3-libary many times before because it said a large amount of my collection was corrupted. but it seams to be better.as i havent used media source to import them so i think they may have actually be corrupt. but interesting findings.

My screen is frozen on Safari. Hard rebot doesn't work. Shutting do ne doesn't work either.

My screen is frozen on Safari. Hard rebot doesn't work. Shutting done doesn't help. What can I do?

Try Force Quitting Safari. You can access Force Quit either by clicking the Apple symbol in the upper right and choosing Force Quit or keyboard shortcut of Command - Option - Esc.

Bridge doesn't like gif

My Bridge doesn't like gif extensions on the pictures. He cal-laps, the program re-installed on my mac, but the same problem. By gif it stops and I have to forced stop to quit the program. hen open again and the same problem appears.
jpg. or png ole but gif bridge won't replace or open or...

BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

MacBook Pro doesn't like my 3rd gen. iPod

Just got a new MacBook Pro (work-issue = no administrator password for me), which replaced a Titanium PowerBook. Tried to hook up and sync my 3rd gen. iPod for the first time, using the Firewire port of course. (Music library has already moved to new machine.)
The iPod doesn't seem to be seen by the MacBook Pro. It doesn't show up in the iTunes source list or on the desktop. The iPod goes into "Do Not Disconnect" mode, then it freezes.
I've seen other people posting with similar or same issues, but no resolution. What could be going on?
MacBook Pro Mac OS X (10.4.5)

Update: I have discovered that if I connect the iPod to the Mac with the Firewire cable only, things work perfectly. If I connect thru the dock with the iPod sitting in it (like I was before), things go haywire.
So I guess the MacBook Pro likes my 3rd gen. iPod just fine. The iPod dock is what it doesn't like.
Weird. Thanks for all your thoughts.
Mac Book Pro Mac OS X (10.4.5)

Perl doesn't like utf8

perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LC_COLLATE = "C",
LANG = "en_US.utf8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Perl doesn't like it when I have my locale set to en_US.utf8. It works fine with just en_US. Is there a fix for this?

How could you set perl to a locale if that locale doesn't exist?
Maybe there are ways to encode just specific things in utf8, rather than having to change all of per's locale. If this is what you mean, then read the perldoc

Create desktop quietly fails - doesn't like my ".portal" file

Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal" file.
After going through the sequence of clicks, it just comes back quietly but the
desktop is not there. It only does this if I "Choose a Template". It seems that
it doesn't like something in my template file but gives no indication of what.
If I revert back to an old template file, it works. However, I also re-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
Phil

Jeff,
Thanks for the reply.
The .portal file was created in workshop and workshop reads it fine.
I discovered that after deleting all my books and pages from the Admin Portal
library, it imported my .portal file successfully. I'm thinking it finds some
"Definition Label" conflict between those in the .portal file and what's in the
library.
Phil
"Jeff Mueller" <[email protected]> wrote:
>
Hi Phil - was there no error message on the console? If not, please
check the
portalServer.log file and/or wl-domain.log file for that server session.
There
should be an error message listed there. It sounds like it's most likely
bad
xml in the .portal file. Did you create the new .portal file in Workshop?
Does
it open correctly there?
Jeff
"Phil Grimm" <[email protected]> wrote:
Guys,
Since SP2, we're having trouble creating a desktop to "import" our ".portal"
file.
After going through the sequence of clicks, it just comes back quietly
but the
desktop is not there. It only does this if I "Choose a Template". It
seems that
it doesn't like something in my template file but gives no indication
of what.
If I revert back to an old template file, it works. However, I alsore-created
a new template file from scratch and it won't read that one either.
Any clues?
Is there some debug/logging options for Admin Portal?
Thanks,
Phil

Encore CS4 Flash output - server doesn't like file names

Apparently my ftp server for my web site does not like files with spaces in the names, but Encore seems to use spaces in some of the file names for the png files in the menus. Is there any way around this? Can I force it to replace spaces with underscores? Can I go in and manually change the links and the file names (there aren't too many). this is very annoying - how could this happen?
Thanks,
Scott

If your server doesn't like spaces in file names, it's likely due to HTML address rules. However, these files won't be linked via HTML, but through the AuthoredContent.xml file directly into the SWF playing in the Flash player, which doesn't have the same limitations as HTML.
If your server is kicking a fuss up about this, replace the single space character in the PNG filename with an underscore character (do this at file system level), then edit the AuthoredContent.xml file and replace the space character in the PNG filename with an underscore character. Save everything, and then upload the files in the same hierarchy that Encore exports.
That should do it.

Safari 2.0.4 doesn't like overflow hidden

Similar Messages

Maybe you are looking for