Safari 3.1 The installer could not install some files in"/"

I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
I attempted to download and install the latest Safari 3.1 and Security update on march 18, 2008.
After validation and subsequent re-start of the machine the following error message was displayed.
*_None of the checked updates could be installed. The installer could not install some files in"/"._*
*_Contact Software Manufacturer for assistance._*
After the iMac hung on the message and a "OFF button push reboot", I attempted to run Safari and the icon bounced once and the app did not run. "Safari Broken" couldn't surf the net.
I replaced the safari app file with an original 3.04 from a memory stick and rebooted and it ran the next time around.
Other attempts days later produced the same results. Safari Broken
Any method of correction? .

See discussion from Clearlake regarding Safari 3.1 failed installation...

Similar Messages

10.5.2 The Installer could not install some files in "/"

I have tried to upgrade my Inter Mac Mini Core Duo 1.66 to 10.5.2.
I ran the install through software update and proceeded through the 2 restarts. Once my mini restarted I checked "about my mac" to find that it still said the system was 10.5.1
I ran software update again to find that on trying to install i now get the message
Install Failed - The installer could not install some files in "/" please contact the software manufacturer for assistance.
I then tried the same with the combo updater and got the same message
I have tried to verfiy my disk or repaire permissions using disk utility for it to completely hang with the spinning beach ball and causes finder to crash.
I have also booted up with the leopard disk in and tried disk utility which says there are no problem with the disk but disk utility in leopard still hangs
Can anyone help??
Is anyone getting the same problem?
Thanks

I'm having the same problem installing the Leopard Graphics Update on my Dual 2.5 G5. Installing 10.5.2 went fine, but afterwards the graphics update would fail to install, with the same error message you got. I tried both Software Update and downloading the standalone installer.
But wait, there's more! I also can no longer repair permissions using Disk Utility. I get the following message: "Error: The underlying task reported failure on exit." Booting from my Leopard install CD does allow me to fix permissions.
Lastly, my second internal hard drive is now also behaving oddly, Any time I try to drag a file to the Trash, I get a dialog box telling me: "The item "(file name)" will be deleted immediately. Are you sure you want to continue?"
I've run DiskWarrior from the CD and tried fsck in Single User mode (no errors found). Nothing seems to help
I had no problem updating to 10.5.2 on my MacBook, but the update to my desktop has been a real booger. Anyone who can offer any input, I'd sure appreciate it.

10.5.4 Update: The Installer could not install some files in "/"

I am unable to install 10.5.4 on my Intel iMac. I have rebooted multiple times, disconnected all external drives including my printer and tried the installer with no success. I have not found anything pointing to why on the forums. Any assistance would be helpful.
Model Name: iMac
Model Identifier: iMac4,1
Processor Name: Intel Core Duo
Processor Speed: 2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 2 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: IM41.0055.B08
SMC Version: 1.1f5
Thanks,

I am having the same issue, and a permissions repair did nothing for me.
I have attempted an install from software update, downloaded both the 10.5.3/4 combo update, and the 10.5.4 update and manually tried to install, each time with the same error: The Installer could not install some files in "/"

Update problem" "The installer could not install some files in "/"."

I've been trying install the 10.5.3 update, but keep getting this error message:
"The installer could not install some files in "/". Contact the software manufacturer for assistance."
I tried software update AND downloading the update for manual updating to no avail.
Anyone know how to solve this?
Thanks,
Ron

I have never heard of this problem, but try repairing permissions with Disk Utility.

"Installer could not install some files in "/". Contact the software manufacturer for assistance."

What does THAT mean!!! Appears when trying to download the new Itunes!!!
Any ideas??
"Installer could not install some files in "/". Contact the software manufacturer for assistance." ?????????????????????

can someone please help!!! I can't install anything on my mac!!! And my iphone isnt even showing up in itunes when i plug it in!

Error mess software updates -installer could not install some files in "/"

I get this message regardless of the software update. Just started today. Has anyone else had this issue? If so, any idea how to fix. Thanks so much in advance!

There may be an error in the computer's directory, requiring a repair; some kinds
of errors or damage to the data in the hard drive are not responsive to attempts
to use the booted Disk Utility version on the OS X Installer disc #1, and while it
may be worth a try to see if that Disk Utility could at least give it a go, the usual
kinds of third party disk utilities (if this is the case, a directory error or damage)
would be along the lines of DiskWarrior, to rebuild or replace a directory.
The slashmark / usually indicates the mount point, of the internal main hard disk
drive partition used by the OS X. So, there may be other reasons why the update
installer does not appear to be working correctly or at all in this matter.
I've not seen such an error message before; but for general maintenance and
before any issues would arise, I try and do preventative maintenance; to include
startup in SafeBoot (shift key held until login screen) and then run Disk Utility to
'repair disk permissions' on Macintosh HD; then when done, note repair logs.
And restart the computer normally. {Also, I have & use Titanium Software OnyX
in its Automation mode every month or two; and choose all checkboxes. This
is also set to automatically restart when the tasks are completed. + It is free.}
To start the computer from the Installer disc and run Disk Utility from there,
involves holding the C key on restart with the OS X install disc #1 in the
optical drive; and when in the Installer, often a second window where there
is a main Installer menu bar, there are drop-down menus from clickable words
across the top bar. Various options are there, and Disk Utility is among them.
This version of Disk Utility can be used to repair disk, repair disk permissions,
and also there are other more active tools among its utility features. This is an
installer, too; with options of several kinds. The Utility can also reformat, etc.
So be careful in what you choose to run. The repair disk and repair permissions
are both ones that may be a bit helpful, at least in the process of elimination.
If the directory is bad, a retail DiskWarrior utility may need to be purchased from
a Mac-friendly vendor; be sure that DW version covers your OS X system level.
Good luck & happy computing!

Installation Failed The installer can't install some files in "/".

The full message is
Installation Failed! The installer can't install some files in "/". Contact the software manufacturer for assistance.
I first received this message when trying to upgrade Pro Tools from 8.0 to 8.0.1 a prerelease for snow leopard. I tried numerous things such as repairing permissions, as well as some pro tools specific things and to no avail. Still got the same error message.
So then I tried completely uninstalling and deleting all things pro tools from my computer. After a clean uninstall and removing all traces of pro tools I proceeded to try and re-install pro tools from my pro tools 8 disk. About a minute into the process I get the EXACT same error message.
I know this issue has been going on since even before snow leopard. I really need to get pro tools installed and running again or at least be able to get the program installed. I've isolated pro tools out of the mix because its been several different installers and even an installer from a dvd. I know this is a Snow Leopard or plain OS based problem. I have repaired permissions, created a brand new user, wiped clean and started over. I don't know anything else to do. PLEASE HELP???!!!

Hi Dean@mac & welcome to the forums...
Any specifics why it wants to install to / instead of Applications, as an example?
Seen these threads yet?
http://discussions.apple.com/search.jspa?search=Go&q=pro+tools
One thing to help investigate the issue is to create a new user just for testing that is stock with no add-on's etc., then login there and try to install. If it works there you can bet there is something unique to your original account that is borking that install - otherwise the issue is most likely global to your system and you might be out of luck until/unless a reportedly qualified version becomes available, etc.
Good luck in any case.

"The installer could not copy the necessary support files." Error message on 0S X 10.6.3 Install

I have just wiped my iMac 21.5' Core i3 3.2GHz as I am going to sell it. This process went as expected but when I try to reinstall the OS from the disk that originally came with the system (10.6.3) it gets around 30% into the install and then produces the error message "The installer could not copy the necessary support files." No matter what I try the outcome is the same and the installation fails.
I did have the hard drive replaced on this iMac a couple of years ago as it was of a batch that apple said could go pop one day. Do the hard drive and the OS X disk that comes with the system have to match, or is it just a case of a faulty disc? Any help would be greatly appreciated.

Hi sonicdeathmonkey1882,
If you are having issues reinstalling the OS on your iMac, you may find the following articles helpful:
Apple Support: Troubleshooting Mac OS X installation from CD or DVD
http://support.apple.com/kb/HT2956
Apple Support: Troubleshooting Mac OS X installation and software updates (Mac OS X v10.6 and earlier)
http://support.apple.com/kb/ts1394
Regards,
- Brenden

The installer could not be found

Hi all im using macbook pro retina and boot camp assistnt 5.0.1
theres a problem after choosing the partition size..
what i get is the message 'The installer could not be found. Insert your windows installer disc and wait a few seconds for the disc to be recognized.'
can somebody help me?D:

You have to insert the USB drive or DVD with Windows 7 on your Mac before partitioning, so you will be able to install Windows

AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

AirPort Utility 5.6 for Mac OS X Lion The installer will not install because it states the OS is not supported. I have the latest

Part of your message was not included. Can you re-post with details again please?

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is apprciated

I am upgrading from Tiger to SL in a MCBPro with 2 gb ram and an intel chip and I get the following notice: Installation failed.... THE INSTALLER COULD NOT COPY THE NCESSARY SUPPORT FILES. Any help is appreciated...

Yes. I've found that works best. Especially if the drive is external, since external connections are typically slower, and Spotlight loves to eat up space going back and forth. Time Machine will eat up as much space as it can, and typically needs drives at least twice the size of the original hard drive that is being backed up, if being backed up in full. So unfortunately there is a lot of empty space that is needed for smooth operation.

HT4463 I keep getting the message "The application could not be downloaded. The installation could not be started." with a "Retry" and "Cancel" button, I have been re-trying for several hours to no avail. What is the problem?

I keep getting the message "The application could not be downloaded. The installation could not be started." with a "Retry" and "Cancel" button, I have been re-trying for several hours to no avail. What is the problem?

You'll need to contact support and have them check your account
https://expresslane.apple.com/GetproductgroupList.action

Install error "could not install some modules:"

After I finsihed install I got some errors one was saying somthing exception related to Zip and then after second run I get
Warning - could not install some modules:
Core Modeling Library - The module named com.tomsawyer.module/1 was needed and not found.
Core Modeling Library - The module named org.antlr.module/1 was needed and not found.
I try to reinstall with the option "repair install" and after that I still get the same error.
by the way I installed both jdk and the ide. I have an older jdk still on my computer.

Thanks for response!
To start the Application Server, open a terminal
window
or command prompt and execute the following:
asadmin start-domain --verbose domain1 The comand window starts with C:\documents and settings\administrator, should I firstly change it to C:\ ? and how to change to C:\ ?
Or, on Windows, you can choose
Programs -> Sun Microsystems -> J2EE 1.4 SDK -> Start
Default Server No, in my Programs menue, there's no Sun Microsystems.
Says Starting and Stopping the Application Server
chapter of The J2EE 1.4 Tutorial:
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/
I browsed the tutorial, it doesn't provide such a trouble shooting.
Are you sure that you have application server
installed?Ths install procedure was successfully finished without any error message. Also, I can see J2EE is in my Control Pannel\ Add Remove\Program list.
What should I do? Thanks!
Jenny

SQL Developer will not start - could not install some modules

I just installed the Java JDK 7u51 as well as the JRE 7u51. Following that I extracted SQL Developer to a fresh directory. When I open SQL Developer I get the following error message:
Warning - could not install some modules:
JDeveloper/NetBeans Bridge - The module named oracle.ide was needed and not found.
Extensions Cache - The module named oracle.javaxide was needed and not found.
Extensions Cache - The module named oracle.ide was needed and not found.
Actions Bridge - The module named oracle.javatools was needed and not found.
Actions Bridge - The module named oracle.ide was needed and not found.
Any idea why I'm getting this message? I installed it on my laptop with no problem.

What is the directory structure under you SQLDeveloper directory?
Is should be something like tthe list below.   If it isn't something has gone wrong with your extraction.
Directory of D:\progs\sqldeveloper-4.0.0.13.80-no-jre
18/01/2014 11:59    <DIR>          .
18/01/2014 11:59    <DIR>          ..
14/12/2013 10:41    <DIR>          configuration
14/12/2013 10:32    <DIR>          dataminer
14/12/2013 10:32    <DIR>          dropins
14/12/2013 10:32    <DIR>          dvt
14/12/2013 10:32    <DIR>          equinox
14/12/2013 10:32    <DIR>          external
10/12/2013 13:28             1,404 icon.png
14/12/2013 10:32    <DIR>          ide
14/12/2013 10:32    <DIR>          javavm
14/12/2013 10:32    <DIR>          jdbc
14/12/2013 10:32    <DIR>          jdev
14/12/2013 10:32    <DIR>          jlib
14/12/2013 10:32    <DIR>          jviews
14/12/2013 10:33    <DIR>          modules
14/12/2013 10:33    <DIR>          netbeans
14/12/2013 10:33    <DIR>          rdbms
10/12/2013 13:28            23,580 readme.html
14/12/2013 10:33    <DIR>          sleepycat
10/12/2013 13:28               835 sqlcli
10/12/2013 13:28               741 sqlcli.bat
14/12/2013 10:33    <DIR>          sqldeveloper
10/12/2013 13:28            82,944 sqldeveloper.exe
10/12/2013 13:28                71 sqldeveloper.sh
14/12/2013 10:33    <DIR>          sqlj
14/12/2013 10:33    <DIR>          svnkit
03/12/2013 00:30             6,426 view-source-paths.lis

Safari Application Error "The memory could not be read"

First of all I would like to say I LOVE Safari (for Windows). Because of it and iTunes I have recently purchased a mac. Now the problem.
For the past 2 weeks or so this has been happening. When I start up Safari I get an error message that says
Safari.exe - Application Error
The Instruction at "0x121f377b" referenced memory at "0x00000000". The memory could not be "read". Click OK to terminate the program.
Now here is where its funny....Safari works, just every time i open it wether it a new window or at startup...this comes up. Does anyone know anyway to fix this and any useful tips for Safari/internet connections/macs?

Actually, I spoke too soon as far as AVG Free anti-virus' link scanner. The next time I opened Pandora internet radio, I got the error again. Looks like it has something to do with adobe flash player for Safari. I removed flash player and i could not get the error. As soon as i re-install and run a website with flash, it gives me the error again until i restart my machine.

Safari 3.1 The installer could not install some files in"/"

Similar Messages

Maybe you are looking for