Safari 3 for Win and Mac not working with sites

I work for a company that does all the IT stuff for the county of San Diego, and it was brought to our attention that the County site (and some of the sites in it) don't play nice with Safari 3 on either platform. I downloaded the latest beta, plugged in http://www.sdcounty.ca.gov , and get a bunch of boxes at the top of the window.
The sites work fine in IE 5-7, Safari 2 and up, and Firefox. Someone on the ARStechnica forums mentioned they saw our servers (IIS and Unix/Apache) are set for uft-32. Okay, so does anyone know what we should have them set at so people (and our client) stop complaining we don't work with Safari Beta?
Thanks for any feedback/help.
Greg

Thanks Tom,
I'll look into it. We're going to change the test server to utf-8, but can't until the one guy who has admin access to the box gets back from training in about a week. Yes, they could have given admin or sudo access to a few of us, but that would have made too much sense.

Similar Messages

  • HT4623 Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.

    Why do my iPhone cords for my 5 say it is not certified and may not work with this device? It's the same cord that came with my phone. The only difference is the iOS7 update.
    Maps took me to the completely wrong side of town for a long standing business in town.

    Hello margmcarlson,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Troubleshooting iPhone, iPad, and iPod touch accessories
    http://support.apple.com/kb/TS2634
    Restore iPhone, iPad, or iPod touch to its factory default state. You should rarely need to use this step with an accessory issue.
    Best of luck,
    Mario

  • Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

    mistakenly opened all the folders in my library of music and the Finder stopped working.
    Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

  • How can I get a sim card for Japan and will it work with my locked Iphone 6

    How can I get a sim card for Japan and will it work with my locked Iphone 6

    You cannot use a SIM card on a carrier locaked phone, other than a sim from the carrier the phone is locked to. You must first get the carrier it is locked to, to unlock your phone. Apple does not unlock phones.

  • Iphone and ipad not working with USB3?

    for some 3 months now, when I connect my iphone or ipad to the pc nothing happens.
    I tried to look it up in the device manager and it said: Apple Mobile Device USB Driver is an older USB device and might not work with USB3.0
    Plug the device into an available USB2.0 port and click next. Otherwise, click cancel.
    Anyone had the same problem? Any solution that doesn't require being a computer engineer?
    Thanks

    nothing else connected,
    I used to simply plug the iphone or ipad and a folder will open giving me choices of what to do (open the device, copy pictures...) nothing happens anymore on both ipad iphone, I can't access them to copy the pictures, videos...

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • Why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset

    why docking cradle with headset jack for apple iphone 5s not working with iPhone 5s headset.

    don't know.  what have you done to troubleshoot?

  • Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub

    Looking for a back up drive for photos and videos that works with time machine, prefer wireless. Time capsule has poor reviews and already have BT hub that serves as a good router. 3gb or 4gb capacity preferred but 2 would suffice.

    Plug a NAS into the BT Hub that does TM. Look at Synology.
    You just use the wireless of the hub.
    But the cheapest solution is still the TC.

  • Animation play wrong in Safari on Win and Mac (with link to project)

    Hello all, I really need you solution, and maybe Edge team take a look for my problem
    Here: http://eliteart.pro/RFGC/presentation.html project (WIP) play well in Mozilla (FF) on Win 7 and Chrome on Win 7, but play wrong on Chrome on Linux, and play wrong on Safari in PC and Mac.
    Please, give me suggestion and help.
    Thanks!
    ps. I can give .edge or .html file (source), if need.

    Ok, sorry for bad English
    Here screens one on Mozilla (PC) and other on Safari (PC too)
    Certificates don't animate in Safari, unlike Mozilla (Firefox). Red arrow show truble place.
    Any suggestions? What picture you have? Can you drop it here?
    Thanks!

  • Appletv remote app and airplay not working with iphone 4S

    I have the latest appleTV.  I have the remote app loaded onto my ipad3 and iphone 4S.  The app is not working with iphone 4S, nor do I get the airplay icon, hence I can't mirrior my phone on appleTV.  It used to work.  I have deleted and reloaded the app, and still nothing.  It worked fined until a month ago or so.  I have enabled home sharing.
    The app and airlplay are working just fine with the ipad3.  I have the ipad and appleTV hooked up to my router using 5Ghz, and the iphone only connects to the 2Ghz network on the same router.  I don't think this is the issue, because it worked before.
    Also, when I click on the remote app on the iphone, to add an itunes library, a code pops up on the phone, which I enter into itunes on my Win7 PC.  Nothing seems happed on the computer when I enter the code.  Could this have anything to do with recent appleTV or itunes updates?  Any possible solutions?

    It seems like I am having the same problem.
    I have the latest AppleTV 1080, imac 27", ipad, ipad2, 2 iphone 4, all with the latest iOS. After I have the AppleTV connected, a few problems showed up:
    (1) ipad plus iphones cannot airplay photo to AppleTV. After the play button and the grey screen displayed "the playing msg on AppleTV", nothing happened. it is the same for ipad/iphone.
    (2) iMac not Airplay to AppleTV
    (3) Airplay Mirroring not working
    The following are done:
    - Home sharing enabled
    - To test the devices are connected. I set a passowrd for Airplay and the ipad/iphone both requested for it so they are network and devices are ok

  • Drag and Drop not working with spark HGroup with code

    Can anyone tell me why my HGroup won't fire the dragEnter dragDrop and DragOver events?
    Here is the sample code:
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                   xmlns:s="library://ns.adobe.com/flex/spark"
                   xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
        <fx:Declarations>
            <!-- Place non-visual elements (e.g., services, value objects) here -->
        </fx:Declarations>
        <fx:Script>
            <![CDATA[
                import mx.core.IUIComponent;
                import mx.events.DragEvent;
                import mx.managers.DragManager;
                private function dragEnterHandler(e:DragEvent):void {
                    DragManager.acceptDragDrop(e.currentTarget as IUIComponent);
                private function dragOverHandler(e:DragEvent):void {
                    DragManager.showFeedback(DragManager.COPY);
                //user drops src onto target, so re-parent the src to the target
                private function dragDropHandler(e:DragEvent):void {
                    var img:Image = e.dragInitiator as  Image;
                    var newImg:Image = new Image();
                    newImg.load(img.source);
                    var grp:HGroup = e.currentTarget as HGroup;
                    grp.addElement(newImg);
                private function mouseDownHandler(e:MouseEvent):void {
                    DragManager.doDrag(e.currentTarget as IUIComponent, null, e);
            ]]>
        </fx:Script>
        <s:layout>
            <s:HorizontalLayout />
        </s:layout>
        <s:Panel width="50%" height="100%" title="Drag me">
            <mx:Image source="http://www.google.com/intl/en_ALL/images/logo.gif" mouseDown="mouseDownHandler(event);" />
        </s:Panel>
        <s:Panel width="50%" height="100%" title="to Here">
            <s:HGroup width="100%" height="50%" dragEnter="dragEnterHandler(event);" dragDrop="dragDropHandler(event);"  dragOver="dragOverHandler(event);" />   
            <s:HGroup width="100%" height="50%" dragEnter="dragEnterHandler(event);" dragDrop="dragDropHandler(event);"  dragOver="dragOverHandler(event);" />   
        </s:Panel>
    </s:Application>

    Derek,IE11 is having some compatibility issues with the share point.Apart from IE11,it should work on IE10,9 and Firefox and chrome as well.
    Please check the links below that explains the issues with IE11 and the functionality of Drag and drop and limitations as-well.
    1.Since SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other browsers. I’d recommend you use IE 8,9,10 32-bit for optimal Performance.
    2. Open the same document library in Internet Explorer as this functions does not work with Firefox or Chrome by default
    3. Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit
    http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
    http://expertsharepoint.blogspot.de/2013/12/how-to-upload-multiple-documents-in.html
    http://expertsharepoint.blogspot.de/2013/12/sharepoint-server-2013-drag-and-drop.html
    Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • Drag and Drop not working with IE11,Firefox or Chrome on Windows 7 x64 SP1

    Hello,
     I am trying to use drag and drop on my system but it is not working. other's within my department have no issues, but they are using IE10. I also have SharePoint Designer 2013 installed.
    Any suggestions?
    Thanks,
    Derek

    Derek,IE11 is having some compatibility issues with the share point.Apart from IE11,it should work on IE10,9 and Firefox and chrome as well.
    Please check the links below that explains the issues with IE11 and the functionality of Drag and drop and limitations as-well.
    1.Since SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other browsers. I’d recommend you use IE 8,9,10 32-bit for optimal Performance.
    2. Open the same document library in Internet Explorer as this functions does not work with Firefox or Chrome by default
    3. Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit
    http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
    http://expertsharepoint.blogspot.de/2013/12/how-to-upload-multiple-documents-in.html
    http://expertsharepoint.blogspot.de/2013/12/sharepoint-server-2013-drag-and-drop.html
    Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • Download/Upload and Properties not working with Netstorage

    I had applied some authorized updates to a SLES 11, SP2, (OES 11.1, PATCHLEVEL=1) running eDirectory 8.8 SP7, server and rebooted a week ago.
    I didn't notice anything wrong initially and thus was living in stupid comfort! :O
    I was able to get to the Novell "Welcome" web page, and I can get into iMonitor and Remote Manager, but when I try iManager, I get "Error 503 Service Unavailable".
    After looking and trying various postings in the Novell forum unsuccessfully, I loaded iManager on a Linux Desktop and I am working with that, but I can't help think that is somehow related to my netstorage problem.
    I am able to successfully login to netstorage and I can navigate around to folders OK.
    Local users have a mapped drive and they are working OK with the nss volume.
    However, then I log in as admin and select a folder and choose Properties, I get "Error 500 Server Error" and if I try it again after that I get "Error 503 Service Unavailable"
    And, when anyone tries to use the other options, such as Upload or Download, nothing happens.
    I verified that Apache2 is running and that tomcat6 is running.
    Below is the catalina.out file for chucks-n-giggles.
    May 16, 2013 1:09:49 PM org.apache.catalina.core.AprLifecycleListener init
    INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: /usr/lib64/jvm/java-1_6_0-ibm-1.6.0/jre/lib/amd64/default:/usr/lib64/jvm/java-1_6_0-ibm-1.6.0/jre/lib/amd64:/usr/lib
    May 16, 2013 1:09:49 PM org.apache.coyote.http11.Http11Protocol init
    INFO: Initializing Coyote HTTP/1.1 on http-8080
    May 16, 2013 1:09:49 PM org.apache.catalina.startup.Catalina load
    INFO: Initialization processed in 788 ms
    May 16, 2013 1:09:49 PM org.apache.catalina.core.StandardService start
    INFO: Starting service Catalina
    May 16, 2013 1:09:49 PM org.apache.catalina.core.StandardEngine start
    INFO: Starting Servlet Engine: Apache Tomcat/6.0.18
    May 16, 2013 1:09:50 PM org.apache.coyote.http11.Http11Protocol start
    INFO: Starting Coyote HTTP/1.1 on http-8080
    May 16, 2013 1:09:50 PM org.apache.catalina.startup.Catalina start
    INFO: Server startup in 1092 ms
    Thanks for your time!
    Stan

    Originally Posted by Demaximis
    I looked at the /var/log/apache2/error_log right after I tried to bring up the properties of one of the netstorage folders and this is what I see:
    [Fri May 17 08:47:27 2013] [error] (111)Connection refused: proxy: AJP: attempt to connect to 127.0.0.1:9009 (localhost) failed
    [Fri May 17 08:47:27 2013] [error] ap_proxy_connect_backend disabling worker for (localhost)
    [Fri May 17 08:47:27 2013] [error] proxy: AJP: failed to make connection to backend: localhost
    Does this point to where the issue is?
    I'm not 100% sure if that's the culprit or not. I didn't think netstorage used an odd port like that.
    I vaguely remember encountering this before a long time ago.
    Out of curiosity, is the actual server name (like: oes11sp1.abc.com) in your /etc/hosts
    AND
    is that the same DNS name you are using to access the netstorage server?
    In our case, we use a different DNS name vs. what the server name really is and we have to adjust the /etc/hosts correctly for some of the internal components to work.
    Also, when you installed OES11, did you accidentally leave the checkbox checked to add the local host definition to the /etc/hosts?

  • MyDAQ fails Self-Test and will not work with any software

    I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
    Trying to self-test or reset the device in MAX gives these errors:
    -The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
    -There was a problem resetting the device. Error code: 80040383.
    It also gives this error when trying to use the Elvis Oscilloscope:
    -Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1 
    Possible reason(s):
    NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
    I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked  NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
    Attachments:
    ni_support.zip ‏341 KB

    Hi chaka123,
    I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
    To answer your questions:
    Does the Test Panels work at all?
    I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
    Have you tried to delete the device in MAX?
    Once again, I cannot because it shows up as Flash Firmware Updater.
    Which is the color of the icon on the left side of “myDAQ1”?
    It was green before the uninstall. Now it shows the USB symbol.
    I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device." 
    What folder can I manually point Device Manager to in order to load the correct driver?
    Attachments:
    devicemanager.PNG ‏40 KB

  • Logfile monitoring for MSSQL ERRORLOG does not work with sapccmsr

    Hi
    We are running MSSQL2005 and wants to monitor the ERRORLOG for certain patterns, using the logfile monitoring feature of SAPCCMSR.
    We are using logfile monitoring with sapccmsr for a lot of other logfiles without problems, but for ERRORLOG is does not work!
    To be more precise: The agent does not report alerts for the text patterns specified. The agent runs fine and in RZ20 we can see that the logfile are checked every minute (but without finding the patterns).
    The strange thing is that:
    - It works for all other logfiles
    - If we do a "type ERRORLOG >> <new file>" and runs the same monitoring on this "copy" of the ERRORLOG then it works
    Any ideas?
    Best regards
    Tom Bo

    Hi,
    Please look at SAP note 1013331 https://service.sap.com/sap/support/notes/1013331.
    In special the changes after patch collection 2007/5.
    Practical you have to use a unicode CCMS Agent to monitor the ERRORLOG file of SQL2005, and add the "ENCODING=UTF-16" parameter in the template file....
    hope this helps..
    Regards
    Rolf

Maybe you are looking for