Safari 3 Update Leads to Tears and Bad Font

what a day.
so i've updated my mac os x version 10.4.11, which included the new safari 3 update.
until i decided to do this, i would use safari and safari only because firefox and netscape had very hard to read fonts in them (also Very slow!!-on this machine), of which i've found you cannot change through preferences. well, the update to safari also changed its fonts to match the ones in firefox and netscape. it hurts my eyes/head to read and is extremely annoying. i decided to throw away safari, in hopes of downloading the old one, only to find that this isn't possible after you've completed the 10.4.11 update (see this post: http://discussions.apple.com/thread.jspa?threadID=1241335&tstart=0 ).
sounds like it's going to be a matter of finding my disc before i can have safari again (i'm in the process of moving to a new home). although, i imagine that even after reloading safari i will still have this font issue. any ideas to why all my browsers have the same messed up font? it's almost like there is a gap within each individual letter. see here: http://i228.photobucket.com/albums/ee41/Lulu_Lagoon/Picture8.png
my @ symbols do not show up in this font either.

*Hi paperplain, Welcome* to Apple's Users Help Users Forums.
In addition to above, Public Library or Internet Café w CD.
Good Luck, JP

Similar Messages

  • Two days ago my Safari was updated to 6.0 and now it won't open.

    Two days ago my Safari was updated to 6.0 and now it won't open. Heasder says, "Safari quit unexpectedly."  Reinstalling OSX10 twice and then updating did not help. Apple support is unable to help.

    Open console in Applications>Utilities, check the system log for the date/time of the last Safari crash for clues.
    Or just have Console open when you try to open Safari.

  • [SOLVED] Qt 4.7 - 4.8 and bad fonts hinting.

    Hi, since the upgrade to qt 4.8, font rendering of qt applications seems very bad to me.
    Before the upgrade, firefox and konqueror looked the same, here is now,
    I tried in graphicssystem native and raster:
    http://ompldr.org/vYnZ2Mw/firefox1.png
    http://ompldr.org/vYnZ2NQ/konqueror_native1.png
    http://ompldr.org/vYnZ2NA/firefox2.png
    http://ompldr.org/vYnZ2Nw/konqueror_raster.png
    http://ompldr.org/vYnZ2Ng/konqueror_native2.png
    I tried autohinter too, but gtk apps (cairo) seems always better, what happened?
    My .fonts.conf:
    <?xml version='1.0'?>
    <!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
    <fontconfig>
    <match target="font">
    <edit mode="assign" name="rgba">
    <const>rgb</const>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="hinting">
    <bool>true</bool>
    </edit>
    </match>
    <match target="font">
    <edit name="autohint" mode="assign">
    <bool>false</bool>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="hintstyle">
    <const>hintslight</const>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="lcdfilter">
    <const>lcddefault</const>
    </edit>
    </match>
    <match target="font">
    <test name="family">
    <string>Segoe UI</string>
    </test>
    <edit mode="assign" name="hintstyle">
    <const>hintslight</const>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="antialias">
    <bool>true</bool>
    </edit>
    </match>
    </fontconfig>
    Last edited by kokoko3k (2011-12-30 14:16:23)

    I casually managed to solve this issue by playing with fontconfig settings.
    I'm really not sure if this is the correct way, but now i've the same font rendering i've had before qt 4.8 with hintstyle=hintslight.
    My Steps are:
    yaourt -S freetype2-infinality
    * do not install fontconfig-infinality
    edit ~/.fonts.conf as follows
    <?xml version='1.0'?>
    <!DOCTYPE fontconfig SYSTEM 'fonts.dtd'>
    <fontconfig>
    <match target="font">
    <edit mode="assign" name="rgba">
    <const>rgb</const>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="hinting">
    <bool>true</bool>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="autohint">
    <bool>true</bool>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="hintstyle">
    <const>hintfull</const>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="lcdfilter">
    <const>lcddefault</const>
    </edit>
    </match>
    <match target="font">
    <edit mode="assign" name="antialias">
    <bool>true</bool>
    </edit>
    </match>
    </fontconfig>
    the trick seems:hinting+autohint+hintfull=hintslight (!?)
    edit /etc/profile.d/infinality-settings.sh and add/replace with those values:
    SET_XFT_SETTINGS=true
    XFT_SETTINGS="
    Xft.antialias: 1
    Xft.autohint: 1
    Xft.dpi: 96
    Xft.hinting: 1
    Xft.hintstyle: hintslight
    Xft.lcdfilter: lcddefault
    Xft.rgba: rgb
    export INFINALITY_FT_AUTOFIT_FORCE_SLIGHT_HINTING=true
    export INFINALITY_FT_FILTER_PARAMS="06 25 44 25 06"
    export INFINALITY_FT_GRAYSCALE_FILTER_STRENGTH=0
    export INFINALITY_FT_GAMMA_CORRECTION="0 100"
    export INFINALITY_FT_BRIGHTNESS="0"
    export INFINALITY_FT_CONTRAST="0"
    export INFINALITY_FT_AUTOHINT_INCREASE_GLYPH_HEIGHTS=false
    export INFINALITY_FT_AUTOHINT_HORIZONTAL_STEM_DARKEN_STRENGTH=0
    export INFINALITY_FT_AUTOHINT_VERTICAL_STEM_DARKEN_STRENGTH=0
    export INFINALITY_FT_AUTOHINT_SNAP_STEM_HEIGHT=0
    export INFINALITY_FT_FRINGE_FILTER_STRENGTH=0
    export INFINALITY_FT_WINDOWS_STYLE_SHARPENING_STRENGTH=0
    export INFINALITY_FT_CHROMEOS_STYLE_SHARPENING_STRENGTH=0
    export INFINALITY_FT_STEM_ALIGNMENT_STRENGTH=0
    export INFINALITY_FT_STEM_FITTING_STRENGTH=0
    export INFINALITY_FT_STEM_SNAPPING_SLIDING_SCALE=0
    export INFINALITY_FT_USE_VARIOUS_TWEAKS=true
    export INFINALITY_FT_USE_KNOWN_SETTINGS_ON_SELECTED_FONTS=false
    export INFINALITY_FT_GLOBAL_EMBOLDEN_X_VALUE=0
    export INFINALITY_FT_GLOBAL_EMBOLDEN_Y_VALUE=0
    export INFINALITY_FT_BOLD_EMBOLDEN_X_VALUE=0
    export INFINALITY_FT_BOLD_EMBOLDEN_Y_VALUE=0
    Now logout/login.
    Starting from there, you can further tweak infinality
    Ah, openoffice also looks good out of the box, no need to install extra '*uglyfix*' packages
    ...and chromium still sucks like nothing happened.
    -EDIT-
    Remember to not change the hintstyle, leave it to hintfull.
    Last edited by kokoko3k (2011-12-30 14:19:40)

  • [SOLVED] Firefox and bad fonts

    I would like to start using Firefox and its excellent plugins, but the only thing that prevents me are the fonts. They seem plain evil!
    They are fuzzy and somehow too large and CTRL++ or CTRL+- won't help with the look. Take a loot at these:
    Firefox: fonts are fuzzy and some characters are looking like painted - see the copyright sign for example! :evil: Also the distance between different characters in a word doesnt seem to be equal all the times and that makes it hard to grasp the word.
    Mozilla Suite: crisp and clear
    I think it is somehow xft - related, because I downloaded the standard Mozilla suite build and it also had these awful fonts and then tried the non-xft build and fonts were ok. In Appearance-Fonts they are described as Serif -> adobe-times-iso8859-1, Sans-serif -> adobe-helvetica-iso8859-1 and so on. How could I get these fonts appear in Firefox, too?
    I have tried to compile Firefox myself with disable-xft option, but it fails with an error about gtk not being found in pkgconfig path.

    What you call "crisp", I just call "aliased". The fonts in Opera are also aliased, which makes them look poor. Your Firefox's fonts look nice, except the fact that the autohinter is making them look sloppy. Comment that part out and see how it looks.
    <?xml version="1.0"?>
    <!DOCTYPE fontconfig SYSTEM "fonts.dtd">
    <!-- /etc/fonts/local.conf file for local customizations -->
    <fontconfig>
    <!--Use the Auto-Hinter-->
    <!--<match target="pattern">
    <edit name="autohint" mode="assign">
    <bool>true</bool>
    </edit>
    </match>-->
    <!--
    Disable anti-aliasing for fonts that are size <=12
    <match target="pattern">
    <test qual="any" name="size" compare="less_eq">
    <int>12</int>
    </test>
    <edit name="antialias" mode="assign"><bool>false</bool></edit>
    </match>
    -->
    <!--
    Enable sub-pixel rendering
    <match target="font">
    <test qual="all" name="rgba">
    <const>unknown</const>
    </test>
    <edit name="rgba" mode="assign"><const>rgb</const></edit>
    </match>
    -->
    </fontconfig>
    Cheers.

  • Safari 5 browser pages not loading and then crashes

    I have reinstalled Safari 5 three times but cannot get it to load browser pages. On attempting to use any menu, the application crashes. I am now using Firefox but that is not a good substitute.

    Will Apple fix this?
    It seems to be common, and no-one seems to know how to resolve.
    I am pretty frustrated about it. I can't even install earlier versions of Safari as updated to 10.6 and older versions of Safari require 10.5......
    Works ok on a new user account, but using Firefox now on my own.
    Can someone from Apple respond to inform why this is happening to so many??

  • MacBook Pro screen flickers and freezes after Snow Leopard/Safari 5 updates

    Hi guys,
    I have a silver 120GB 15-inch MacBook Pro from Summer 2007 with 3GB RAM and 25+GB free space which has recently begun to freeze irrecoverably. The first appearance of these symptoms seems to coincide with my installing the Snow Leopard 10.6.6 update via Software Update.
    I'm not particularly well versed in computer technology, but will try to describe my problem as detailedly as possible.
    What happens is this:
    1. I start the computer as per usual, with only a couple of startup items. Everything's fine.
    2. I start working. Use a lot of Safari 5 for browsing websites, often with some kind of Flash or "Flash-type" content such as banner ads, videos, even full Flash designs. I may also have programs such as QuickTime, VLC or an image editor open, if not necessarily "actively" doing anything. Everything's still fine - I'm able to both browse websites and watch videos as usual.
    3. After a while of active working - say, 1-3 hours - I notice browsing websites gets a little choppy. Display features such as the file list view in Finder may or may not appear properly. The rotating wait cursor may or may not appear from time to time.
    4. Immediately after symptom no. 3, the next time I start to watch a video, either via Safari 5 (say for example something on DailyMotion.com) or a file via QuickTime, something goes wrong.
    Following no. 4, one of three things invariably happen:
    5a) The video freezes and the entire screen flickers from black to the screen view very quickly two or three times, after which the computer or screen appears to freeze. The cursor still moves, but nothing reacts to it - open windows become completely unresponsive, nor does the top or any other menu react in any way to clicking. The "menu row" of application items, which normally appears when I move the cursor to the very bottom of the screen, doesn't appear. Restarting "blindly" by pressing the Off-button once and pressing R doesn't work. I'm forced to do a hard reboot, after which the computer is once again fine until the next two hours of active working. This usually happens ONLY when I try to watch a video in Full Screen-mode.
    5b) I notice the video freezing only just in time, and am able to pause it and "esc" out of Full Screen-mode, and the computer remains operational. However, as soon as I again try to play video in Full Screen-mode, everything described in 5a. happens.
    5c) The video stops playing, and the screen reverts momentarily to pale blue before switching to the login screen. I login again with my details, and everything appears to be fine again until the next two hours of active working. The computer "starts up" a lot faster than with a hard reboot. This usually happens ONLY when I've tried to watch a video in its original size, i.e. when not in Full Screen-mode.
    This happens 1-4 times a day, and it appears to depend directly on how much work I've been doing on the computer. The less I use it in the course of a day, the longer it takes until the next time it freezes.
    So, in a way, I'm able to replicate this problem. 95% of the time the screen has frozen while watching or starting to watch (usually already when starting to watch) video footage, but it has also frozen a couple of times just switching between e.g. Safari 5 and an image editor or browsing a website with a Flash banner ad or embedded video content (which however hasn't necessarily been playing); today, the screen froze when I tried to open a website made entirely with Flash.
    Although it could be just a coincidence, I believe this issue first appeared when I updated Snow Leopard to 10.6.6 via Software Update alongside some other pending updates, including as far as I recall one for Safari 5. The update process appeared to have gone well at the time, though, and was not interrupted in any way. I have never had this specific problem with the computer/screen before, though.
    I've read a couple of threads here regarding very similar issues with newer MBP models than mine, in which it has been suggested that the fault may lie in a malfunctioning NVIDIA GeForce graphics card. Now I've had that replaced already once because my screen went unexpectedly completely blank after a forced reboot 1-2 years ago (I don't remember exactly), but according to my System Profiler info the card still a GeForce 8600M GT. Can it be failing again?
    I've also had some kind of a RAM card failure once. As far as I understood it, one of the RAM cards had fried and was preventing the computer from starting up. I replaced the bad 1GB card with a new 2GB one and the problem was resolved. Before the computer died, there were also other symptoms, but they were not similar to these.
    I'm also doing the Apple Hardware Test tomorrow. Any other suggestions, though, than the graphics card?
    *Could this have to do with Flash or Safari 5?* Just hear me out. Even though my computer has frozen from watching a video in just QuickTime, Safari 5 has always been open in the background at the same time, and more likely than not with websites with "Flash" content open. And come to think of it, before I performed the Snow Leopard and Safari 5 updates, I used to have daily problems viewing Flash video in Safari 5, the video content either suddenly showing up as "Plug-in Failure" or crashing the browser; I've had both Safari 5 and the Safari 5 Flash plug-in "quit unexpectedly" countless times in the past, almost daily. Sometimes the "Plug-in Failure" could be fixed just by refreshing the browser view; at other times, Safari 5 would stop showing Flash content altogether - Flash banner ads (such as Google ads), YouTube and other Flash videos, everything - until I quit and restarted Safari 5. BUT - since the day I updated everything via Software Update, I don't remember this happening; it never gets to "Plug-in Failure" now. Could it be worth trying to use e.g. just Firefox for a while or is there something (e.g. Adobe Flash) that I could try reinstall? Or am I just clutching at straws here?
    Thanks for reading this long, long post!

    Do you have access to an Apple Store? If so, it may be worth making an appointment at the genius bar and having them run the test for the NVIDIA problem. Since your replacement logic board still has the NVIDIA GeForce 8600 M GT video chip, it could be starting to happen to your replacement logic board.
    I also agree with all of CMCSK's suggestions. Freezing is often associated with hard drive problems. You might also want to run SMART Utility:
    http://www.apple.com/downloads/macosx/systemdiskutilities/smartutility.html
    You can download the demo and run it several times for free. It will give you a very comprehensive view of the physical health of your hard drive. If you still have the original one from 2007, it's getting pretty long in the tooth and may be approaching the end of its average useful life of 3-5 years. I just recently had to replace my original 2007 Fujitsu drive.
    If your drive is headed south, and is also too small, it may be time to upgrade to a larger and faster drive.
    The software update probably didn't cause the problems, but it may have exposed problems that were already in existence.
    Good luck!

  • Have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open

    I have a macbook pro running 10.8.5. Safari updated a day ago and now it is corrupt and will not open. It upgraded to 6.1. What is the best proceedure to get Safari working again?
    Thanks

    This is the most common problem :
    How do I uninstall Glims?
    If not that, please include a crash report & test in a new or Guest user account.

  • Hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    hello applecare  can you help with the macbook pro i did the update the last one and safari doesn't open anything .. what should i do ?

    Hello John...
    You may have a Safari third party add on installed that was compatible with the previous version of Safari but not 5.1. Try troubleshooting > Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
    FYI... this is a user to user forum. If you can't resolve the issue, information for contacting AppleCare  here.

  • When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
    If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
    Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

  • Hello  My system version 10.5.8  I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:   "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".

    Hello
    My system version 10.5.8
    I have installed Safari update - 5.0.6 and the browser stopped working. At openingit shows the following icon:
    "Safari has suddenly finished working. Possible problem is in the action of the plugin "TastyAppsAVPlugin".
    After deleting all plugins from the folder "Internet Plugin", Safari worked again no problem, BUT all sites with flash content (e.g.YouTube) did not work.
    I then tried the following experimental steps:
    a) Moved all plugins from the folder "Internet Plugin" into a temporary folder.
    b) Downloaded and istalled Adobe Flash Player version 10.3.181.34
    c) Started Safari and it did not work ( same message"TastyAppsAVPlugin")
    d) Deleted Adobe Flash Player from the folder "Internet Plugin". Safari worked.
    e) Moved back all plugins, except Adobe Flash Player, from the temporary folder to "Internet Plugin" folder. Safari works... But Flash won't work!!! Before update to Safari 5.0.6 , ev erything worked perfectly well.
    Guys, please solve the problem
    Regards
    Ruslan Reed
    [email protected]

    MayaMa --
    There are many threads on this.  I typed "Uninstalling TastyApps" in the Google search, and came up with these:
    http://www.google.com/search?client=safari&rls=en&q=Uninstalling+tastyapps&ie=UT F-8&oe=UTF-8
    I do not know which of the many TastyApps haxies you have.  Perhaps it would be better to contact them directly, once you know which of their products you have.

  • Error message after update "Safari cannot open a browser window and may be

    My daughter just did an update and got the following error message: "Safari cannot open a browser window and may be missing important resources. Try installing Safari again.
    Any thoughts or tips as to what happened?

    Just a few pieces of clarifying information... This is Safari on OS X you're talking about, right? Also, what update did your daughter install? Have you tried reinstalling Safari (you can download it from Apple's site)?

  • My safari preferences/ security screen has changed and no longer addresses cookies.  There is now a Preferences/Privacy screen that allows one to delete cookies, although it is harder to do than the older security screen.  Was this an update?

    My Safari Preferences/Security screen has changed and no longer addresses cookies. Rather, there is a new Preferences/Privacy screen that allows you to manipulate cookies, but it is not as easy to use as when cookies were on the security screen. Was this an update?  Has this change affected anyone else? This is strange, because  Safari Help still states cookies are manipulated on the Security screen, even though the screen has changed and no longer addresses cookies.

    Presuming you're referring to Safari 5.1, yes, it's moved, but I don't see it as being harder. Now you can clear all privacy-related items - cookies, cache and history - with one button, the "Remove All Website Data" button. If you want to work with individual cookies, it's still just one button, the "Details" button. So no, I don't see it as being more difficult.
    Regards.

  • I've updated a web page and now the links will not open in any browser except safari

    I've updated a web site and the links no longer work. I'm using Dreamweaver. The page works perfectly in Safari but not in Explorer or Firefox and I don't know what to change to fix this.
    == not sure what to add here

    I thought I did post the page. Anyway, I did solve the problem. I'm working in Dreamweaver on files originally created in GoLive. The CSS from GL has to be completely expunged from the file or Firefox has this issue (doesn't respond to links). This, even though the problem had no obvious connection to the linked text. Interestingly, images with links worked fine.
    I spent 45 minutes on the line with Adobe tech support and they didn't catch this. But while talking to them it occurred to me.
    thanks, Bob

  • I have just tried to update my ipod touch and the update failed but it has locked my ipod.  All I get is a picture of the itunes logo and the usb lead

    I have just tried to update my ipod touch and the update failed but it has locked my ipod.  All I get is a picture of the itunes logo and the usb lead.  I am unable to get the ipod to move and I don't know what to do.  I think I should be recompenced by Apple if I have to pay to get it fixed!

    The logo is saying connect it to your computer with iTunes installed on the computer.  I assume when yo do this that the iPod is not seen in iTunes. to make iTunes appear try:
    - Resetting the iPod:
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Place the iPod in recovery mode.  See:
    iPhone and iPod touch: Unable to update or restore
    - Place the iPod in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    If the iPod appears in iTunes restore the iPOd.  If not I would make an appointment at the Genius Bar of an Apple store.

  • Safari 8.0.2 updated on the 20Jan2015 and Link from Mail do not open | Advertisement pages opens | Blank page do not open on new window click, etc

    Hi! 
    Safari 8.0.2 was last updated on the 20Jan2015 and is my default browser. 
    Below listed are issues with Safari after last two updates.
    When I click web link from mail, Safari does not open that link. I changed to Chrome browsing & it works.
    When I click to open new window from the dock, I get last browsing page of the previous opened window web page, where by my setting is for a bank page for a new safari window. .
    Every time I click on the link to open in the same browsing web page, a new tab opens with advertisement web page. How can I stop advertisement pages to open automatically.  
    Safari does not open first time by one finger single click on the safari icon from dock, need two finger click and then select the preferences.
    Thanks, will await your assistance & if required updated version at the soonest.

    1.Use free AdwareMedic to remove the adware
        http://www.adwaremedic.com/index.php
        Download, install , open,  and run it by clicking “Scan for Adware” button   to remove adware.
        Once done, quit AdwareMedic.
                   or
        Remove the adware  manually  by following the “HowTo” from Apple.
        http://support.apple.com/en-us/HT203987
    2. Safari > Preferences > Extensions
         Turn those off and relaunch Safari to test .
         Turn those on one by one and test.
    3. Safari > Preferences >  Search > Search Engine :
        Select your preferred   search engine.

Maybe you are looking for

  • After IOS 8 update I my wifi toggle is greyed out.

    After some research I learned I should have turned off the where's my iPad on iCloud before I updated to IOS 8.  Now I cannot turn it off or do anything that requires the internet.  Yes I have tried to reset via iTunes and the iPad itself but without

  • I need to create this effect in PS CS3

    It is not a drop shadow as I tried that . All I know is how to use the rectangular marquee to get the rounded corners. What is the correct term for this effect. effect around ring is here http://dagwaremedia.com/pshopeffect.jpg

  • CS 5 2nd installation issue

    I have installed CS5 (not CC) onto my laptop, as my second install.  I am getting the message "One or more files in the Adobe Application Support folder, necessary for running PS, are missing.  Please run the PS installer and re-install PS."   I know

  • Process Multiple Files is not working correctly

    When using Process Multiple Files to resize several images, the resulting files are way too small.  I am resizing to 12"x8" at 150dpi which used to result in about a 2 meg file.  Now the files are about 200k.  Something has changes and I can't find i

  • CiscoSecure ACS using Novell Database for 802.1x

    I am using user authentication to validate users on the network. I am running ACS 3.2 on a Windows 2000 server. The customer is running Novell 6.1. I have set up an external database within ACS. This is a generic LDAP configuration. The problem is th