Safari 4 0 3 - not finding server

Out of the blue - Safari will not connect to server (either will firefox etc). Has worked for ages but when laptop goes into "sleep mode" none of the browsers reconnect via airport when I take out of sleep (or when I turn on computer for first time).
I can run diagnostics / assistant etc - and re-enter passwords and eventually reconnect and no problems from there. BUT, when the system goes to "sleep" or re-starts - it disconnects from safari and I have to go through the whole process again.
The airport icon (upper left of desktop) always shows full signal and connected. For the last 18 months I would only have to add a password once. Now I have to run the diagnostics or assistant to connect to the same place was recently connected too..
Thank you...

I have the same problem with my 17" MacBook Pro and 24" iMac both running Safari 4.03 and OS 10.4.11. The iMac will finally open after a min. or so. The MacBook Pro usually takes additional effort to connect. It usually receives a message "None of your trusted servers are available would you like to join appleXXXXX" our normal connection.

Similar Messages

Safari not finding server

why would safari not find certian servers that it used to find

I too am getting very tired of the "Safari can't find the server." error message. I am trying to open a stock market analyst website that used to open before called "The Evil Speculator". I have reset and emptied my cache. Time and date on Dashboard are OK. I saw something about Open DNS but unfortunately have no clue as to what this is about.

When I try to use Safari I get an error message that states it can not find server Xn--%20%20-1ia0eb092a

When I try to use safari I get a message that states can not find server Xn--%20%20-1ia0eb092a

It sounds like you've got a messed-up homepage. Click the Safari menu, click Preferences, and under "Home page", re-type the page you'd prefer to load when Safari starts (eg "nytimes.com" or whatever). Close preferences and try again.
Matt

WebtopNaming - can not find server name for server ID

We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA'

Hi, All
the system is PI 7.0 EHP1 oraclei Win2003 server, I configured SLD but I run RZ70, having error "RFC call failed: JCO.Server could not find server function 'SET_SLD_DATA' ". I know there are lot of tread about this error, but none of themsolve my problem. all JCO, RFC connections and SDL DATA supplier(VA) seem OK. error message in SM21 is "Could not send SLD data"
detail from SM21
The system could not send the data that has been collected automatical
for the System Landscape Directory (SLD). Check whether the gateway
configured in transaction RZ70 has been started and whether the SLD
bridge has been registered with this gateway.
You can use transaction SM59 to check this in the sending system for t
implemented RFC destinations. The RFC destinations have the standard
names "SLD_UC" for Unicode sending systems and "SLD_NUC" for non-Unico
sending systems. If a different RFC destination has been entered in
RZ70, check this destination instead.
You can use the Gateway Monitor to check the target gateways. In ABAP
systems, this monitor is started with transaction SMGW, or you can use
the external SAP program "gwmon". Check whether the specified gateway
has an active registration.
OF COURSE I checked RFC of SLD_UC and SMGW
any different ideas
Regards
ABH

Hi
Please check the following notes are implemented
Note 906454
Note 907729
You may be aware but if you are not --->RZ70 creates the required SLD* RFCs during runtime - therefore if you have defined these RFCs manually first using the same namespace you can get RFC conflicts which result in a failed submission
Please also check the user in the RFC is known to both systems and has required authorization to write to SLD
Generally with SLD you have to install or select a suitable gateway to handle incoming data supply traffic
Also the gateway you are using has be known to SLD and reflected in RZ70 - i.e these defintions have to be the same
It is also recommended to delete all references to SLD_* RFCs in data supplier and target SLD
after a failed submission attempt to allow RZ70 to recreate these consistently once the above has been checked
Best wishes
Stuart

JCO.Server could not find server function 'CONTROL_RECIPE_AVAILABLE'

Hi Experts,
I've been trying to read some of the topics in the forums to find answers about the error JCO.Server could not find server function but still haven't resolve the issue.
Basically, the scenario is from SAP r/3 to PI 7.1 ehp1 (process integration) system.
All of the aforementioned steps we're done.
R/3 (SAP) end
1.) Create RFC destination (T)
2. ) Indicate the program ID
3.) Indicate the server/hostname
4.) Indicate the sap gateway
Test connection was made and it was successful.
SAP PI end.
Integration Directory (Let me skip from the basics and state directly the setup of my senderRFC)
1.) RFC Comm Channel (set as Sender)
2.) Indicated the server hostname (sending system), sap gateway and Program ID (basically what was indicated in RFC setup in SAP end)
3.) RFC Metadata Repository Parameters (In here I used the details of PI environment)..Created user with SAP_ALL profile..I used system without Load Balancing (Parameter, AppServer, SysNo, Logon User, Logon Password, Language and Client)
I was able to test a message from SAP end but still "JCO.Server could not find server function" was the result upon checking sm58.
Did I miss something from my setup and config?

Hi Michal,
I guess there's a big difference with RFC Server Parameters and with RFC Metadata Repository Parameters.
Note: Im using PI 7.1 ehp1
For RFC Server Parameters it includes:
- Application Server (gateway)*
- Application Server Service (gateway)*
- Program ID*
For RFC Metadata Repository Parameters it includes:
- Load Balancing or no Load Balancing (choices)..in here my choice is no Load Balancing
- Application Server*
- System No*
- Logon Language*
- Logon Client*
- Authentication Mode (Use Log-on Data for SAP System or Secure Network Connection for RFC)
if Use Log-on Data for SAP System it includes:
- Logon User*
- Logon Password*
If Secure Network Connection for RFC it includes:
- Quality of Protection
- SNC Partner Name
Looked onto your blogs mentioned several times, but no information on RFC Metadata Repository Parameters.

Could not find server

I am trying to create a connection to my server so that I can
start working.
I enter the name of my FTP server, which is
http://dreamhost.com.
I enter my FTP username and password and this little box pops
up that reads:"Unknown host. Contribute could not find server "
http://dreamhost.com". Please check
your connection information or contact your administrator. Oh- I am
also online as I try to create the connection.
Any advice?
Thanks,
liliateal

> I am trying to create a connection to my server so that
I can start
> working.
> I enter the name of my FTP server, which is
http://dreamhost.com.
> I enter my FTP username and password and this little box
pops up that
> reads:"Unknown host. Contribute could not find server
> "
http://dreamhost.com".
> Please check your connection information or contact your
> administrator. Oh- I
> am also online as I try to create the connection.
> Any advice?
> Thanks,
> liliateal
Hi,
Try a ping to this server of yours. And see if it respongs !!
Also see if your user/pass is correct.
-Avinash

Cannot connect to iTunes store.Safari cannot find server

Cannot connect to iTunes store.Safari cannot find server.I can't update my games and other applications cos iPad cannot connect to iTunes store.Please help

Be sure you have a good WiFi signal!
Try reset modem/router (disconnect from power for some minutes)
Keep the Powerbutton and the Homebutton pressed at the same time until you see the Apple logo on your iPad screen.

Adobe Content Server 4.1 - Cound not find server's private key in the keystore

Hello,
I have getting following error when i setup fulfillment services of Adobe Content Server 4.1.1
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
root cause
java.lang.Error: Cound not find server's private key in the keystore
     com.adobe.adept.fulfillment.security.ServerConfig.init(ServerConfig.java:156)
     com.adobe.adept.fulfillment.security.ServerConfig.getSigningURL(ServerConfig.java:48)
     com.adobe.adept.fulfillment.servlet.FulfillmentServerStatus.getServers(FulfillmentServerStatus.java:34)
     com.adobe.adept.common.servlet.Status.checkUp(Status.java:355)
     com.adobe.adept.common.servlet.Status.doGet(Status.java:424)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:617)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
note The full stack trace of the root cause is available in the Apache Tomcat/6.0.20 logs.
My fulfillment-conf.txt contains following:
com.adobe.adept.log.level=trace
com.adobe.adept.log.file=C:\acs4\log\fulfillment.log
com.adobe.adept.persist.sql.driverClass=com.mysql.jdbc.Driver
com.adobe.adept.persist.sql.dialect=mysql
com.adobe.adept.persist.sql.connection=jdbc:mysql://127.0.0.1:3306/adept
com.adobe.adept.persist.sql.user=acesdbuser
com.adobe.adept.persist.sql.password=******
com.adobe.adept.serviceURL=http://127.0.0.1:8080/fulfillment
com.adobe.adept.fulfillment.security.licensesignURL=https://nasigningservice.adobe.com/licensesign
com.adobe.adept.fulfillment.security.keystore=pkcs12
com.adobe.adept.fulfillment.security.pkcs12.file=file:///C:/ACS4/operator.p12
com.adobe.adept.fulfillment.security.keystore.user=operator4acs
com.adobe.adept.fulfillment.security.keystore.password=******
Any Idea?
Regards,

Are you sure you created the .p12 file with the correct '-name' friendly name? The value for -name must match the value com.adobe.adept.fulfillment.security.keystore.user

SAP IGS: JCO.Server could not find server function 'PIGFARMDATA'

dEAR ALL,
Operating System: aix6.0
Database: Oracle 11g
IGS is not getting started.
SM59--IGS_RFC_DEST--CONNECTION TEST is fine
sigs-- IGS_RFC_DEST-- Error is generating " JCO.Server could not find server function 'PIGFARMDATA' ".
Tried starting IGS USING the below command:
/usr/sap/KBQ/DVEBMGS01/exe/igswd_mt -mode=profile pf=/usr/sap/KBQ/SYS/profile/KBL_DVEBMGS01_<Hostname>
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp    3735]
kbqadm> sapcontrol -nr 01 -function GetProcessList
22.07.2014 16:36:48
GetProcessList
OK
name, description, dispstatus, textstatus, starttime, elapsedtime, pid
msg_server, MessageServer, GREEN, Running, 2014 07 22 16:33:57, 0:02:51, 8847548
disp+work, Dispatcher, GREEN Running, Message Server connection ok, Dialog Queue time: 0.00 sec, AS Java: ALL processes running, 2014 07 22 16:33:57, 0:02:51, 12976352
rslgcoll, Central Syslog Collector, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 9175214
rslgsend, Central Syslog Sender, GREEN, Running, 2014 07 22 16:33:58, 0:02:50, 8585278
DVEBMGS01\exe\ig.sapKBQ_DVEBMGS01, , GRAY, Stopped, , , 13566036
ps -ef | grep igs--all igs process are running
HTTP://<HOSTNAME>:40180---sap igs IS RUNNING
IGS Logs: ( /usr/sap/KBQ/DVEBMGS01/igs/log)
trace File pw_sapbwqa_1.trc
[Portwatcher::Ping] Ping was unsuccessful 3 times
[Portwatcher::Ping] Reconnect Portwatcher
Tue Jul 22 16:54:11 2014
[Portwatcher::Ping] Ping was unsuccessful 1 times
Tue Jul 22 16:54:41 2014
[Portwatcher::Ping] Ping was unsuccessful 2 times
igs vERSION IS Internet Graphics Service 7200.0.7.0
"mux_sapbwqa.trc---tRACE File
Tue Jul 22 16:29:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
*** ERROR => [ListenerRfc::OpenRfc] RfcRegisterServer() returned RFC_COMMUNICATION_FAILURE /
ERROR       partner 'sapbwqa:sapgw01' not reached
TIME        Tue Jul 22 16:29:13 2014
RELEASE     720
COMPONENT   NI (network interface)
VERSION     40
RC          -10
MODULE      nixxi.cpp
LINE        2896
DETAIL      NiPConnect: 10.10.90.150:3301
SYSTEM CALL connect
ERRNO       79
ERRNO TEXT Connection refused
COUNTER     18
[listenerrfc_ 948]
*** ERROR => [ListenerRfc::Loop] OpenRfc() (IGS.KBQ sapbwqa sapgw01) returned RFC_COMMUNICATION_FAILURE
Still trying... [listenerrfc_ 1007]
Tue Jul 22 16:30:13 2014
*** ERROR => [ListenerRfc::Loop] RfcListenAndDispatch() (IGS.KBQ sapbwqa sapgw01) returned error: RFC_INVALID_HANDLE [listenerrfc_ 1039]
trc file: "mux_sapbwqa.trc", trc level: 1, release: "720"
Tue Jul 22 16:39:40 2014
[IgsMux::Initialize] Internet Graphics Service 7200.0.7.1
[IgsMux::Initialize] Platform: IBM RS/6000 with AIX (rs6000_64)
[ListenerRfc::ListenerRfc] Constructed for R/3 NA
[ListenerHttp::ListenerHttp] Constructed for port 40180
*** ERROR => [ListenerHttp::Loop] NiListen on port 40180 failed [listenerhttp 703]
[ListenerHttp::~ListenerHttp] Destroyed for port 40180
[Multiplexer::StartUp]
*** ERROR => [ServerTcpIp::NiServerLoop] Caught a NetError: [NetError] [NiBufListen failed] [ServerTcpIp::NiServerLoop()] [-4]. [servertcpip_ 254]
can you please tel the reason why the IGS is not working
Regards
gayathri.K

Hi Gayathri,
Startup using profile
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 1/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40180) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40100) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40101) [nixxi.cpp    3735]
***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3735]
*** ERROR => NiIBindSocket: SiBind failed for hdl 2/sock 5
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:40102) [nixxi.cpp    3735]
Just check the process which is using the port
netstat -tupan|grep 40180
With Regards
Ashutosh

CSD Load Data Full completing with Could not find server for data domain Error

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Hi,
We have installed the Oracle Ebusiness suite extension with Endeca following the Oracle Support note : 1562372.1.
We found that the CSD Load Data Full completing with below error :
Element [ENDECA_MERGE_RECORDS0:Bulk Add/Replace Records]-Component pre-execute initialization failed.
        at org.jetel.graph.Node.run(Node.java:446)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:615)
        at java.lang.Thread.run(Thread.java:722)
Caused by: Failed with the following exception:
        java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:155)
        at org.jetel.graph.Node.run(Node.java:444)
        ... 3 more
Caused by: java.rmi.RemoteException: Could not find server for data domain Error connecting to the Endeca Server. If applicable, ensure your SSL settings are correct; nested exception is:
        org.apache.axis2.AxisFault: Could not find server for data domain
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:99)
        at com.endeca.clover.adapters.DIWSConsumer.<init>(DIWSConsumer.java:45)
        at com.endeca.clover.adapters.merge.MergeRecordsConsumer.<init>(MergeRecordsConsumer.java:51)
        at com.endeca.clover.adapters.merge.UpsertRecordsConsumer.<init>(UpsertRecordsConsumer.java:36)
        at com.endeca.clover.adapters.merge.MergeRecordsAdapter.getConsumer(MergeRecordsAdapter.java:110)
        at com.endeca.clover.adapters.DIWSAdapter.createConsumerThreads(DIWSAdapter.java:56)
        at com.endeca.clover.adapters.BaseAdapter.preExecute(BaseAdapter.java:146)
        ... 4 more
Caused by: org.apache.axis2.AxisFault: Could not find server for data domain
        at org.apache.axis2.util.Utils.getInboundFaultFromMessageContext(Utils.java:446)
        at org.apache.axis2.description.OutInAxisOperationClient.handleResponse(OutInAxisOperation.java:371)
        at org.apache.axis2.description.OutInAxisOperationClient.send(OutInAxisOperation.java:417)
        at org.apache.axis2.description.OutInAxisOperationClient.executeImpl(OutInAxisOperation.java:229)
        at org.apache.axis2.client.OperationClient.execute(OperationClient.java:165)
        at com.endeca.dataingest.axis2.ingest.IngestStub.ingestChanges(IngestStub.java:791)
        at com.endeca.clover.adapters.DIWSConsumer.initIngestStub(DIWSConsumer.java:88)
        ... 10 more
Kindly request your help in resolving this error.

Error RFC sender scenario :JCO.Server could not find server function

Hi ,
The scenario which am working is as follows:
I already have a report in R/3 that calls a Bapi which is in CRM system, now I want to make this point-point connection through XI(RFC sender-XI-RFC Reciever) with out changing the report (only changing the RFC destination).
I have imported the bapi from CRM to XI , changed the rfc destination(to tcp/ip) that existed in R/3 to point to XI(test connection is working fine) and also created the RFC sender adapter .
Now on executing the report am getting the following error.
JCO.Server could not find server function
Please, let me know where I went wrong.
Should the function module exists on the XI server. If the functional module is not there then I am getting the error if the function module is there in XI then every thing is working fine.

Hi Michal ,
Now my scenario is working . The error <b>"JCO.Server counld not find server function"</b> got fixed by giving the system details that contain the RFC in the adapter metadata parameters in the channel configuration.
Thanks & Regards,
Srikanth.

JCO.Server could not find server function "ZVERIFY_FILE"

Hi Experts,
I am facing one problem, i have created on TCP/IP connection with connection type T and given it some Program Id.
I have register this Program id On SRM server.
Now from this server i want to call one JAVA file, for that purpose i have installed JCO on the server.
My server file looks like,
import com.sap.mw.jco.*;
//import com.tcs.jns.JSignNS;
//import com.tcs.jns.JSignNSException;
//import com.tcs.jns.CertDetails;
// added by paresh on 16.1.2009
import java.io.FileOutputStream;
import com.tcs.jie.jverify.JVerify;
import com.tcs.jie.jsign.JSign;
public class ds_listener extends JCO.Server {
Create an instance of my own server
@param gwhost (gateway host)
@param gwserv (gateway service number)
@param progid (program id)
@param repository (repository used by the server to lookup the definitions of an inc)
     public ds_listener(String gwhost, String gwserv, String progid, boolean isUnicode, IRepository repository) {
          super("sapdev14", "sapgw01", "DS_RFC", repository);                this.setProperty("jco.server.unicode", isUnicode?"1":"0");
     /** Overrides the default method. */
     static ds_listener serverConnections[] = new ds_listener[1];
     protected void handleRequest(JCO.Function function) {
          JCO.ParameterList input = function.getImportParameterList();
          JCO.ParameterList output = function.getExportParameterList();
          if (function.getName().equals("ZVERIFY_DATA")) {
               try{
                    JVerify JNS = new JVerify();
                    String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
                    //boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
                    //initialize method has to be called before calling any other method of the API
                    String recdSignature = input.getString("SIGNATURE");
                    boolean ret_update = JNS.updateSignature(recdSignature.getByetes());
                    if (ret_update){
                         int count = JNS.getSignerCount();
                         boolean ret_verify_sign = false;
                         while(count > 0){
                              ret_verify_sign = JNS.verifySignature(count - 1);
                              if (ret_verify_sign){
                                   ret_verify_sign = false;
                                   count = count - 1;
                              }else
                                   break;
                         if (count == 0){
                              String decoded_data = new String(JNS.getDecodedData());
                              output.setValue("X", "STATUS");
                              output.setValue(decoded_data, "DATA");
                         }else{
                              output.setValue(" ", "STATUS");
                              output.setValue("Error in Signature Verification. Please check Certificate Validity of every signer.", "DATA");
               }catch (Exception e1){
                    output.setValue(" ", "STATUS");
                    output.setValue(e1.getMessage(), "DATA");
          }else if(function.getName().equals("ZVERIFY_FILE")) {
               try{
                    JVerify JNS = new JVerify();
                    String dbPath = "/home/admin/FormSigner_23Apr/FormSigner_Release/certdbs";
                    //boolean res = JNS.init (dbPath); // commented by paresh on 16.1.2009 as its obsolute
                    //initialize method has to be called before calling any other method of the API
                    String recdSignature = input.getString("SIGNATURE");
                    boolean ret_update = JNS.updateSignature(recdSignature.getBytes());
                    if (ret_update){
                         int count = JNS.getSignerCount();
                         boolean ret_verify_sign = false;
                         while(count > 0){
                              ret_verify_sign = JNS.verifySignature(count - 1);
                              if (ret_verify_sign){
                                   ret_verify_sign = false;
                                   count = count - 1;
                              }else
                                   break;
                         if (count == 0){
                              output.setValue("X", "STATUS");
                         }else{
                              output.setValue(" ", "STATUS");
               }catch (Exception e1){
                    output.setValue(" ", "STATUS");
          }else{
               return ;
Start the server
     public static void startServers() {
          JCO.addClientPool("POOL",3,"200","sisldp","paresh1234","EN","sapdev14","01");
          IRepository repository = JCO.createRepository("REP", "POOL");
          for (int i = 0; i < serverConnections.length; i++) {
               // Server listens for incoming requests from system 1
               // (Change gateway host, service, and program ID according to your needs)
               serverConnections<i> = new ds_listener(
                         "sapdev14",//gateway host, often the same as host
                         "sapgw01", //gateway service, generally sapgw+<SYSNR>
                         "DS_RFC", // corresponds to program ID defined in SM59
                         true, // or false for non unicode listener
                         repository);
               serverConnections<i>.start();
     public static void main(String[] args) {
     startServers();
The file have no error as i have compiled it on server, its listener file given in JCO with some modification.
I have tested the connection from SM59 it's working fine,but when i call my any of the 2 function(ZVERIFY_DATA & ZVERIFY_FILE) defined in my java file then i am getting an error "JCO.Server could not find server function 'ZVERIFY_FILE'" on SRM screen.
Can anyone tell me what can be the reason????
please help, i am in real trouble.

Hi,
This is may be of the wrong FunctionModule name means check in case also,it may be case sensitive.
And check whether it is remotely enabled or not and check the RFC destination.
For more details refer these threads.
JCO.Server could not find server function 'SET_SLD_DATA'
JCO.Server could not find server function
Problems with sender RFC
Thanks.

Why does my mac pro, which i purchased in 2011 keep dropping internet saying safari cant find server

why does my 2011 mac pro keep dropping internet, saying safari cant find server. THIS *****

Mac OS X (10.7.1)
Click your Apple menu / Software Update
The v10.7.2 update may help.
If you have anti virus software installed, disabale that and try turning off the Firewall.

The internet connection was lost, when reconnected could not reconnect ipad to internet message Safari could not find server

I am trying to reconnect my wife's ipad to the internet. Keep getting message Safri cannot find server. Can anyone help

Hello Tatiana,
It sounds like you're not able to access the Internet on your wife's iPad using Wi-Fi. I found a couple of resources that will help troubleshoot Wi-Fi issues on the iPhone:
Joining and troubleshooting Wi-Fi networks
https://www.apple.com/support/ipad/assistant/wifi/
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Safari Cannot find Server

hi all,
just purchased a new macbook a few days ago and i have found that when i am trying to access certain websites i get a message up saying "safari cannot open the followig page as Safari cannot find the server". i have tried emptying cache and reseting safari but it is still happening on a regular basis with different sites. could it be a problem with my internet settings?? i connect via airport to a wireless modem.

Hello z:
Welcome to Apple discussions.
First, check with your ISP to be sure your settings are correct.
To correct a different problem, I use OpenDNS (free version). That may not address your issue, but it cannot hurt.
http://www.opendns.com/start/
Barry

Safari 4 0 3 - not finding server

Similar Messages

Maybe you are looking for