Safari 4.0.3 slow on first Startup after Rebooting/Booting System. 10.6.1

Found this Video and I have excately the same problem.
Safari Slow Startup - Video
On the first startup after system boot safari is very slow. After that everything is back to normal.
What's up with this? Anybody else?

A quick update on this. And @BroSter, find uninstalling instructions for SafariBlock below. CHEERS!
1) ClickToFlash is not the problem. Just update it to v1.6b2 which works flawless for me. Get it here:
http://rentzsch.github.com/clicktoflash/
2) Uninstalling SafariBlock:
Go to Macintosh HD -> Library -> InputManagers and delete the SafariBlock folder. You'll need administrative privileges to do this, and you may need to restart your computer for the change to take effect.

Similar Messages

First startup after PC boot takes too long / too slow

Hello there.
I've been experiencing this problem for about a year now but never actually thought it was a problem until I saw how fast FF can really start up on another computer.
Searching this issue on google mostly suggested to delete themes and plugins, emptying cache, etc but it didnt help in my case.
What I noticed is that when starting firefox for the first time on a recently booted computer it takes far too long to start up - 30-60sec. However exiting firefox and then restarting it is actually as fast as it should be. It is always the first startup that takes really long.
I am also sure that it does '''not ''' have to do with the fact that I am trying to start firefox while the whole OS is still loading with all its background processes.
Leaving the OS to load completely and then starting firefox also leads to a slow startup.
I hope someone can help me with this issue.
Many thanks!
Leo
My OS is Win7 64bit, 4gb RAM, using FF 10.0

If you opt in for sending data to Firefox, that includes information about start-up times. The developers use that feedback to analyse problems and improve firefox. As you say themes and other software extensions to Firefox may increase startup times. Another thing you may do to speed up the startup is take the option to load tabs later not immediately.
* use '''Firefox Button -> Options -> | General | -> []Dont load tabs until selected'''
** see [[options window - general panel]]
* for other advice and suggestions read [[Firefox takes a long time to start up]]
* also see [[How can I help by submitting performance data?]]

Folder with question mark on startup after using boot camp!!!

im getting a folder with a question mark on startup after using boot camp. it shows up for a second, then the apple logo pops up and OSX boots normally. i wouldnt be concerned except this folder with the question mark usually shows up when the computer cant find the startup disk or OS. so in fact what is happening is that my macbook cant find the startup disk for a second and then seems to find it. is anybody else having this problem. i dont like it and want to get rid of it. help!!

This is correct.
I wonder how it can be that in the System Preferences - Startup Disk - OS X volume can become "deselected" like it was... I had to re-highlight the OS X volume and all is well.
b
MBP & Mac Mini Mac OS X (10.4.6) http://www.therottenapple.net/phpbb

Firefox Always "First Run" After Reboot or Log off The PC.

Firefox Always "First Run" After Reboot or Log off The PC, No Deepfreeze. I have scanned the PC and no virus. How To fix that?

Firefox Always "First Run" After Reboot or Log off The PC, No Deepfreeze. I have scanned the PC and no virus. How To fix that?

When I click on Firefox for the first time after I boot my PC it takes three minutes to but after that new Firefox windows open promptly.

Hello and thank you for being available to receive this enquiry.
I like Mozilla.
I like Firefox.
In recent months I have experienced and accumulation of problems. Today (September 25th, 2011) I have set about trying to deal with them.
After consulting your Troubleshooting Section I have made a range of changes that I hope shall resolve problems like freezing, unresponsive scripts, non responding windows and browser crashes.
At the time of writing I have rebooted after making those changes so I have yet to discover whether they solve those problems.
However, I have chosen o write now as I already am re-experiencing the first problem I encounter when I boot my PC, i.e. Firefox takes three minutes at least to start after I click the icon. Once it has started, however, ne Firefox windows open promptly.
How do I solve this? I rememebr a time when Firefox opened with lightning speed whenever I clicked the icon.
Thank you for your valued help and interest.
Patrick O' D.

Hello Patrick O' D,
In my experience t here are two different problems with the speed of firefox on startup
# your os and setup
# firefox - and exactly what you use with it
Some factors will be down to your OS and for instance what does start up initially, many of those factors will affect other programmes/applications and not only firefox.
Some other factors depend on Firefox and how you set that up, I always like to have the option to using Firebug but realise it cold clash with other software or slow down firefox startup so I only enable it as I need it. see for instance: https://addons.mozilla.org/en-US/firefox/performance/

Firefox 3.6.10 on Windows 7 crashes always on first startup after a few seconds

Every time I open up Firefox, always Firefox crashes within the 1st minute of start up, after the crash the reporter opens up and if I click don't submit, the crash process will happen again.
However if I click 'Submit' then Firefox remains stable afterward, until I close the window and start up Firefox again.

Yes, my CS6 InDesign still crashes after all that. I tried starting Windows and then InDesign in safe mode but InDesign still didn't start. The error was the same as before. I keep thinking there is that saved data file is somewhere I can't find it.
- System
- Provider
[Name] Application Error
- EventID 1000
[ Qualifiers] 0
Level     2
Task       100
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-11-03T15:24:26.000000000Z
EventRecordID 59657
Channel Application
Computer           aradag3
Security
- EventData
InDesign.exe
8.0.2.413
51fb7197
ObjectModel.dll
8.0.2.413
51fb7185
c0000005
000179d4
700
01cff77a37764697
C:\Program Files (x86)\Adobe\Adobe InDesign CS6\InDesign.exe
C:\Program Files (x86)\Adobe\Adobe InDesign CS6\ObjectModel.dll
7e7d79cb-636d-11e4-8b1f

Getting slower by the minute, after reboot speeds up for a while...

I've read a coouple of similar posts, about the macbook getting very slow, but I seem to have almost tried all the solution suggestions.... I've used CleanmyMac hundreds of times, I've rebooted on the installation disk and tried the "disk utility": repair disk thing. I've downloaded ONYX and tried that. I've gotten rid of just about everything ecxept for the absolute minimum (Which tends to make the compter a lot less fun). I have hardly no songs on the actual macbook or images, or video files.... I checked out how much space was being used on the individual folders and found that the mobile applications and the library were using by far the most memory space, so I've cut that down manually to the minimum.
But still, after used the mac for a while it takes like 4 minutes for it to erase a simple text file, or to move one file to another folder, so I have to restart the whole system and then i speeds up again for a while.... but what could the problem be??? I have at least 20% of memory space empty at all times, if not 40%, but it no better..... any ideas??????
thanx fraggles

Hi,
I would first create another user to see if it behaves the same way and test to see if it's something with the computer, or if it's user specific.

Database startup after reboot of RAC server

Hello,
My config : 2 nodes w2k3 with 15 dbs . Oracle 10.2.0.3
I started to scheduled my rac server reboot so i follow the oracle doc to shutdown properly all db,asm,service,listener,etc...
Today one the server reboot, but some instance doesn't start (only five , and the last five in alphabetic order)
In the log :
db log : nothing just the shutdown
crs_log : the start of the 10 db but nothing for the last five !!
just a trace on one listener service :
StartResource error for ora.sqyora01.LISTENER_1522_SQYORA01.lsnr error code = 1
2010-08-11 02:56:08.000: [ CRSRES][3008]32Start of `ora.sqyora01.LISTENER_1522_SQYORA01.lsnr` on member `sqyora01` failed.
2010-08-11 02:56:08.125: [ CRSRES][3008]32Skip online resource: ora.sqyora01.LISTENER_SQYORA01.lsnr
On windows services : the OracleServiceSID service isn't started.
Any help is welcome to understand this problem.
Thanks.

user4511076 wrote:
IMO : (i am not a great oracle dba, because i have not enough time to spend with, and my collegue need really simple think to do, like startup/shutdown a database, no more investigation)Why startup/shutdown a database? I have databases that work 24x7 and uptimes of over a year. The record so far, has been over 24 months uptime (1st downtime were caused by a powerfailure to the rack cabinet). And for a database instance that runs a number of processes and deals with 100's to 1000's of inserts per second.
it's easier to view that an oracle process take more cpu and so investigate in that database what's appens. Rather than search in my v$sql table to find witch schema doing wrong thinksNot sure what you are trying to say here. Single or multiple database instances do not change how a session looks like, or how SQLs are executed.. and thus not how you troubleshoot problems. Nor does it change resource requirements, or how you address these. But multiple instances do impact resource availability and requires one to split resources amongst instances - the end result of this is less flexibility.
It's easier to affect cpu ressource to a process, rather than configuring it in oraclePlease explain.
It's easier to stop a database rather than "put offline a schema"This is a "silly" statement to make IMO. Why do you want to offline a schema? Availability of applications and data are a critical feature in today's information system landscape. So why argue the complete opposite and say it is now more complex to make something less available?
By the same token, why do you want to offline a database? A down database is even less useful than a downed server - at least you can use the downed server as a doorstop.. ;-)
And if a database crash it only affect one application.Yeah.. and these happens when? Every few minutes? Every hour? Once a day?
This is not a valid argument. Oracle instances very seldom crashes just for the heck of it. Most often it is due to incorrect o/s configuration, problematic hardware, uncertified components, old drivers, etc. Or plain old application abuse of Oracle.
There is the theorical approach and practical one : I'm not alone is that case :
http://oracledoug.com/serendipity/index.php?/archives/1339-The-Reality-Gap-3-A-Single-Instance-per-Server.html
http://www.dba-oracle.com/art_dbazine_server_consolidation.htm
I have never done RDBMS as a theoretical thing. The most dynamic table (ito SQLs against it) I have, grows by more than 450 million rows per day. This is as real world as real world gets. And that is what shapes my experience and opinion. And Burleson and I have never seen eye to eye on a number of subjects - so quoting his views on consolidation does little to persuade me to change my opinion.
have you any ideas where can i found an error message that explain why my database doesn't start ? (like not enough ressource ;-) )Troubleshooting a problem starts with a very basic principle - isolation. Isolate the layer or moving part where the problem occurs. As the other instances are running, it means that the CRS software layer is up and running, that the storage layer is up and running and so on. So the problem should be with the instance that for some reason refuses to start? Confirm this by using sqlplus to start a down instance and looking at what its alert log file says. It should have some kind of pointer to what dependency that has not been met.

Bootcamp enabled on startup but does not startup after rebooting

Hi all,
My bootcamp is going berserk.
It hasn't been able to start-up for a few days and i've been searching for a fix.
I've found out to check whether bootcamp is enabled on startup. After i check on system configuration, it was enabled however after the reboot, it still doesn't startup!
Its frustrating as i can't everytime turning on my computer and going in to program files to on my bootcamp every single time i reboot.
Please anyone could help me?
I'm running on Bootcamp 4.0 on MacBook Pro 13" Windows 7 partition (Didn't check on what OS i'm using x.x)

For bootcamp within the windows OS, bootcamp is usually shown on the notification area icons
Like so.
But, now my computer does not have the symbol of the bootcamp panel when i boot up my windows. It thus, causes the function keys on the keyboard and th trackpad to not able to function.
So, for me to make my function keys and trackpad to function properly, i would need to go to control panel to redo the settings everytime i start up.
Without the startup of bootcamp control panel to support the keyboard and trackpad, it would fail to function on my Windows. However, booting in iOS would work perfectly.

I amusing iphone4 not iPad and the safari can't find any web page even after reboot

the safari can't do anything and shows the operation can't complete .is there some body running into the same problem? and how you fix it?

Do you have an active internet connection either via cellular or wifi? Are other apps able to connect to the internet?

WLAN AutoConfig Service crashes 3 or 4 times after you first login after rebooting?

Hi,
My lenovo came with windows vista - I upgraded to 7 when I got a chance. I have W7 Professional. I have all the Lenovo drivers installed except access connections. I don't like the tool. Anyways, Windows manages my wireless adapter. I have the weirdest issue -- right after I login after rebooting, the service "WLAN AutoConfig" crashes 3 or 4 times in sucession any time something tries to access the net. If you restart it enough times, it eventually stays up and never crashes again until you reboot. Also, the fancy aeropeek stuff crashes too. The task bar becomes non-transparent. That eventually recovers as well.
I have another t61 thru my work running w7 and it doesn't have this issue. The difference between the two of them is mainly that it has the intel based wifi card instead of the atheros based one.
In the event log, I see:
The Windows Audio Endpoint Builder service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 120000 milliseconds: Restart the service.
The HomeGroup Listener service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Network Connections service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 100 milliseconds: Restart the service.
The Program Compatibility Assistant Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Superfetch service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Remote Desktop Services UserMode Port Redirector service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The WLAN AutoConfig service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
then I see this later after a bunch of them have restarted
The Offline Files service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The HomeGroup Listener service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Network Connections service terminated unexpectedly. It has done this 3 time(s).
The Program Compatibility Assistant Service service terminated unexpectedly. It has done this 3 time(s).
The Superfetch service terminated unexpectedly. It has done this 3 time(s).
The Distributed Link Tracking Client service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The Remote Desktop Services UserMode Port Redirector service terminated unexpectedly. It has done this 1 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
The Desktop Window Manager Session Manager service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The WLAN AutoConfig service terminated unexpectedly. It has done this 3 time(s).
The Portable Device Enumerator Service service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
The Windows Driver Foundation - User-mode Driver Framework service terminated unexpectedly. It has done this 2 time(s). The following corrective action will be taken in 300000 milliseconds: Restart the service.
Has anybody encountered this? If so, did you find a fix?

Also, I noticed this thread on Microsoft's site -- should I try disabling ipv6?
http://social.answers.microsoft.com/Forums/en-US/w7network/thread/c9605d54-7d4d-4e8c-83ae-4d3d287df2...
I don't use it anyways.

White screen on startup after reboot

Performed a system update, installed a bunch of new software, was prompted for a restart, now all I have a is a white screen and unresponsive machine. Any ideas? iMac is a week old. Frustrating because I had same problem on another one that this one replaced!

Please update your profile about your Mac; model, RAM, etc. The more complete the easier for folks to assist. Do you have any 3rd party peripherals attached? USB? Firewire? Did any of the Software updates include the EFI firmware update? Did you read and follow the installation directions for this update properly? Will your Mac restart with the Install Disc?
Here are some troubleshooting steps for when you see a blank, gray screen
1. Make sure the latest firmware for your computer is installed. Check Apple Downloads for the latest versions.
2. Disconnect all peripheral devices, except for the Apple keyboard and mouse. This includes USB, FireWire, mini-DVI devices. If this resolves the issue, connect one device at a time, restarting after each one, until you've determined which device is causing the issue.
3. Remove third-party hardware upgrades such as memory (RAM). If this resolves the issue, add back one item at a time, restarting after each one, to isolate the issue.
4. Start up from your Mac OS X installation disc and check the hard disk with Disk Utility.
5. Reset your computer's System Management Controller.
6. Additional tips may be available in Isolating issues in Mac OS X.

A Bouncing Safari Icon - at startup (after upgrade fron 1.2)

A bouncing Safari icon with a spinning pinwheel at startup (after upgrade fron 1.2) and finding that safari just will not open - then forced to reboot bact into 1.2 - I wouldf like to find out what 1.3 is all about. by the way I.m also have issues with a "localized string not found" issue.
Any one have any ideas?

Have you looked at the locked thread at the top of the Safari help list? This I think should help you with the localised string issue you are having. Or if you are lazy....
K Tilford, "Fix for "localized string not found" issue", 09:08pm Mar 24, 2005 CDT

Kmail crashes on first startup

Every time I try to start Kmail after rebooting my system, I have to start it twice, because the first time it crashes. This is what I see when it crashes:

Well, I've since switched back to thunderbird. Kmail has an issue with comcast emails, where it will suddenly start redownloading every single email. I had worked around the issue by making it only grab emails from comcast when it was told to, but then after awhile switched back to doing it automatically because I thought the issue was fixed.

Safari 4.0 is slower to show only the first web site

Safari 4.0 is slower to show only the first web site. Once Safari is open, the first site may take 4 to 5 seconds to show, and Console indicates:
11/06/09 17:15:09 [0x0-0x99099].com.apple.Safari[1029] Debugger() was called!
Subsequent sites load in just one second or so (and Console does not show any messsage).
If I quit Safari and open it again, the same issue arises: it takes longer to show the very first site (whatever it is) but not the subsequent ones (for which it is quicker), and Console shows a similar string on such very first site (but not the subsequent ones). Other examples of such string:
11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
11/06/09 17:15:58 [0x0-0x9b09b].com.apple.Safari[1033] Debugger() was called!
11/06/09 17:17:06 [0x0-0x9c09c].com.apple.Safari[1036] Debugger() was called!
How to prevent such Console message and make Safari also quick to show the very first page or site after opening Safari?
Thanks.

Not to get your hopes up, did you ever hear or figure out any resolution to this. I have a (slightly) similar issue passed along from one of my bosses, that when he upgraded to 4.0.2 it started causing issues with FTP logins through Safari. He would have to enter passwords multiple times on the same site. So initial entry worked and then every subsequent event needed a password entry. Just curious if this could be part of your problem. I tried to emulate the problem on my machines and only on the one I have the 4.0.2 update does it happen.

Safari 4.0.3 slow on first Startup after Rebooting/Booting System. 10.6.1

Similar Messages

Maybe you are looking for