Safari 4 tabs do not display unread counts for GMail and Google Reader

To reproduce this, do the following:
1. Create a bookmark for either GMail or Google Reader
2. Click on the bookmark under Safari to load either site (make sure it has at least on unread item)
The text in the tab title will not display the unread count. Instead, it displays either "GMail" or "Google Reader". Firefox displays the unread counts for both sites in the tab's title text as follows: "Gmail - Inbox(2) - <email addr>", "Google Reader (2)".
This is the one of the main reasons why I will continue to use Firefox over Safari 4. Displaying the unread counts in the tab titles allows me quickly glance at the browser's window with both sites loaded in separate tabs to see if there are any unread items.

I was able to fix the problem by disabling Gmail Labs (you can always reenable them again).
http://mail.google.com/mail/?labs=0.
Or go to Settings-Labs and you'll notice a link at the very top asking you if you want to kill all the labs if it breaks something on gmail...there's an escape hatch.

Similar Messages

Excise Invoice Tab is not display in MIGO for Cancelled document

Hi,
We are execuating the incoming excise cycle then in MIGO and J1IEX.It is perfectly working.But in case of cancellation the excise tab is not dispplaying in MIGO.We are using option "Only Capture and Both Capture & Post".Whatever the excise captured and Posted , it is updated in Excise Invoice tab in MIGO.
As per my understanding the excise tab should come for cancelled doucment also.
Regards
Rajev

Hi,
You are correct it won'y come for 102 but it will come for 101.But it is not coming for 101 .It is not coming when we cancelled the document.
but it will come for 101
.But it is not coming for 101
can you explain your statement ?
If it is not coming for 101 movement type
check following point
1) tax code in PO ,all excise condition should be there
2) Maintain chapter ID material combination in J1ID
3) Maintain Vendor and Plant excise details in J1ID
Regards
Kailas Ugale

Excise tab is not displaying in migo

Hi,
for one material, purchase order has done. when i am going to do migo against purchase order, the excise invoice & excise items tab is not displaying.
note:- for all other materials(purchase order), excise tab is displaying.
could you please solve this problem.
thanks/regards
vish

Hi,
Check the problem with repect to the material,
Check if the Tax % is assigned properly for the combination of tht material. check J1ID,
Is in the PO the excise amount calculated? Check the condition records?
Thanks & Regards
Kiran

SOLVED:Tabs is not displayed correctly?

Gang,
I have a very strange problem which I can't really understand why APEX behaves it way it does (well I've probably told APEX to do so, but I can't understand why).
I have 3 Parent Tabs:
T_PAGE1
T_REPORTS
T_ADMIN
All of the Parent Tabs have one or more Standard Tabs associated to them. And each Standard Tab is associated with one or more pages.
But the strange thing is that I have associated page 3 with a std tab which then belongs to the T_REPORTS Parent Tab. If I run the page the Parent Tabs are not displayed at all, but the Standard Tab is (and also the breadcrumb). I did assign the tabs to the page when I created the page and I have retried the same thing a couple of times with the same result.
And if I run any other page in my application I can see the Parent Tabs and if I click on the Parent Tab (T_REPORTS) the Parent Tabs disappears and I only see the std tab.
Any ideas or is this completely confusing for you as it is for me ???
Cheers,
Andy
Message was edited by: A Tael
I should really make myself a martini and stop thinking that I can build APEX apps. The issue was that I had assigned my T_REPORTS Tab with the wrong Parent Tab. Doh!

Glad your first experience on the Arch forums was successful. Don't forget to edit the thread title to make it say "Solved".

MIGO not displaying GOITEM-SGTXT for new posting

Hi All,
MIGO not displaying GOITEM-SGTXT for new posting
last year postings SGTXT is visible,
while checking in customer exits there is no no code.
I want to make it visible GOITEM-SGTXT.
Plz help.
Thanks
Saket

Hi guru's,
I have similar issue with MIGO Material Doc display,
The screen field GOITEM-SGTXT on the 'Where' tab is not displaying for current year ,
Previous years the Text field is displaying with the data.
GOITEM-SGTXT is getting the data from ML18N , ESSR-TXZ01 as the text is not entering through MIGO.
I checked the customer exit and the BADI's for the MIGO , but not activated for manipulating the
GOITEM-SGTXT.
Please give me an idea what makes this issue.
System Details:
ECC 5.0
SAP_APPL - 5.0 Logistics.
SAP_ABA - 6.40 Cross-Application Component
Thank you

The safari software will not display images (pictures). I have done the "reset" but still no help. What should i try next?

the safari software will not display images (pictures). I have done the "reset" but still no help. What should i try next?

    Safari > Preference > Advanced
    Checkmark the box for "Show Develop menu in menu bar".
    "Develop" menu will appear in the Safari menu bar.
    Click Develop and make sure that"Disable Images" is not enabled in the dropdown.

Sub tab portelts not displaying

When I create sub tabs, the portlet on that tab does not display the first time it is diaplayed. I have to move to another sub tab and then back before it will display.
Has anyone seen this?

Hi,
we're experiencing the same.
Environment:
Portal 3.0.6.6.5 on Sun Solaris
Test Case:
- set property 'display as portlet' for page (e.g. Oracle Portal Navigator)
- create tab in second region on test page (page has two vertical region)
- create page portlet on this tab for Oracle Portal Navigator (which has multiple tabs)
Then the first time the tab is render no content is displayed as described by David.
Thanks, Tony

Re: Excise tab is not displaying in migo.

My end user has created an asset P.O. Then while executing migo excise tab is not displaying. what is the fault, & where we have to correct it. its ur.
thanks
tuljasingh.

Hi,
While doing MIGO transaction the excise tab will appear only if you mark your line item as OK in your MIGO item details.
Try to simulate MIGO by marking your item as OK then excise tab will appear & if the excise values are not flowing in the excise tab check the following
J1ID excise master
1. Plant - Material - Chapter ID combination
2. Vendor Plant Excise Details.
3. Excise Tax Rates for Chapter ID/Plant combination.
Check whether the rates are there in your PO or not?
Also check the whether you have maitained the Default excise condition types in SPRO/LG/Tax on Goods movements/India/ Basic Settings -Maintain Excise Defaults.
Regards,

Resp Person Tab is not coming in CJ20N for a particular project type

Hi All,
I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
Regards
Anmol Pareek

Hey Sarang,
Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
Regards
anmol

Spry tabbed panel not displaying correctly in IE , in other browsers it is fine, what is the fix

Spry tabbed panel not displaying correctly in IE , in other browsers it is fine, what is the fix

As an FYI: Adobe discontinued developing the Spry framework last year. And Spry was removed from DW CC. You can keep using Spry if you wish, but most of us have switched to other solutions that work better in IE10 and Touch Screens.
Nancy O.

Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, how can I have the old version? Thanks!

Just upgrade to 33.1.1, terrible! new tab position not configurable, no response for clicking a link, not going to the website by click "enter", "space" keyboard can not be the page down anymore, always die....
how can I have the old version?
Thanks!

Just to clarify, let's say you have tab 1 Google results and tab 2 something else. When you Ctrl+click a link in tab 1, it opens between tab 1 and tab 2 instead of at the end? Here's how you switch that:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the search box above the list, type or paste '''tabs''' and pause while the list is filtered
(3) Double-click the '''browser.tabs.insertRelatedAfterCurrent''' preference to switch it from true to false.
You can switch back to an earlier tab and test. Success?

S_ALR_87013611 is not displaying any data for GL

Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SM

Hi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

C# compiling error: 'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found (are you missing a using directive or an assembly reference?)

Hello experts,
I'm totally new to C#. I'm trying to modify existing code to automatically rename a file if exists. I found a solution online as follows:
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
while (allFiles.Contains(tempFileName ))
tempFileName = String.Format("{0} ({1})", fileName, count++);
output = Path.Combine(folderPath, tempFileName );
string fullPath=output + ".xml";
However, it gives the following compilation errors
for the Select and Contain methods respectively.:
'System.Array' does not contain a definition for 'Select' and no extension method 'Select' accepting a first argument of type 'System.Array' could be found
(are you missing a using directive or an assembly reference?)
'System.Array' does not contain a definition for 'Contains' and no extension method 'Contains' accepting a first argument of type 'System.Array' could be
found (are you missing a using directive or an assembly reference?)
I googled on these errors, and people suggested to add using System.Linq;
I did, but the errors persist.
Any help and information is greatly appreciated.
P. S. Here are the using clauses I have:
using System;
using System.Data;
using System.Windows.Forms;
using System.IO;
using System.Collections.Generic;
using System.Text;
using System.Linq;

Besides your issue with System.Core, you also have a problem with the logic of our code, particularly your variables. It is confusing what your variables represent. You have an infinite loop, so the last section of code is never reached. Take a look
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
using System.IO;
namespace consAppFileManipulation
class Program
static void Main(string[] args)
string fullPath = @"c:\temp\trace.log";
string folderPath = @"c:\temp\";
string fileName = "trace.log";
string output = "";
string fileNameOnly = Path.GetFileNameWithoutExtension(fullPath);
string extension = Path.GetExtension(fullPath);
string path = Path.GetDirectoryName(fullPath);
string newFullPath = fullPath;
string[] allFiles = Directory.GetFiles(folderPath).Select(filename => Path.GetFileNameWithoutExtension(filename)).ToArray();
string tempFileName = fileName;
int count = 1;
//THIS IS AN INFINITE LOOP
while (allFiles.Contains(fileNameOnly))
tempFileName = String.Format("{0} ({1})", fileName, count++);
//THIS CODE IS NEVER REACHED
output = Path.Combine(folderPath, tempFileName);
fullPath = output + ".xml";
//string fullPath = output + ".xml";
UML, then code

RegionRenderer encodeAll The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance.

Hi,
I am using JDEV 11.1.2.1.0
I am getting the following error :-
<RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
Piece of code is for region is:-
   <f:facet name="second">
                                            <af:panelStretchLayout id="pa1"
                                                                   binding="#{backingBeanScope.Assign.pa1}">
                                                <f:facet name="center">
                                                    <af:region value="#{bindings.tfdAssignGraph1.regionModel}" id="r1"
                                                               binding="#{backingBeanScope.Assign.r1}"/>
                                                </f:facet>
                                            </af:panelStretchLayout>
                                        </f:facet>
How do I resolve it ?
Thanks,

Hi,
I see at least 3 errors
1. <RegionRenderer> <encodeAll> The region component with id: pt1:r1 has detected a page fragment with multiple root components.
the page fragment should only have a single component under the jsp:root tag. If you see more than one, wrap them in e.g. an af:panelGroupLayout or af:group component
2. SAPFunction.jspx/.xml" has an invalid character ".".
check the document (you can open it in JDeveloper if the customization was a seeded one. Seems that editing this file smething has gone bad
3. The expression "#{bindings..regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "pePanel") evaluated to null.
"pageeditorpanel" does seem to be missing in the PageDef file of the page holding the region
Frank

Safari 4 tabs do not display unread counts for GMail and Google Reader

Similar Messages

Maybe you are looking for