Safari 4 won't render all text between pre and /pre tags

I am unable to read text between <pre> and </pre> tags in Safari 4.0.3 for Snow Leopard. The problem started when I upgraded to Snow Leopard, but I'm afraid I might have corrupted something when I ran a piece of nastiness called Leopard Cache Cleaner that also corrupted some other preferences. I tried deleting .com.safari.plist to no avail. Anyone heard of this problem or have a solution?

I found the solution - it turns out that Safari's "fixed width" font was supposed to be Courier, but for some reason Courier wasn't loading properly. Setting another Fixed width font fixed the problem.

Similar Messages

Safari 4 won't accurately render all text between pre and /pre tags

I am unable to read text between <pre> and </pre> tags in Safari 4.0.3 for Snow Leopard. I will only get some of the text but not all. The problem started when I upgraded to Snow Leopard, but I'm afraid I might have corrupted something when I ran a piece of nastiness called Leopard Cache Cleaner that also corrupted some other preferences. Has anyone heard of this odd problem, or have a fix for it? I tried deleting com.apple.safari,plist to no avail.

I found the solution - it turns out that Safari's "fixed width" font was supposed to be Courier, but for some reason Courier wasn't loading properly. Setting another Fixed width font fixed the problem.

Hi All difference between abap and hr-abap urgent pls

Hi All difference between abap and hr-abap urgent pls

Hello,
To add to the above points regarding infotypes
Infotypes stand apart in HR and manage a volume of data in HR domain..they are unique to HR module ranging from basic employee information to time management and finally the custom infotypes.....
Payroll and other monetory activities related to an employee also form a vital part of the HR module....
while considering Reports..in HR data is mainly with respect to infotypes and the concept of PAKEY...7 key fields which uniquely defines any record in an infotype is used..with Pernr(employee number),Begda(begindate) and Endda(enddate) form an integral part of the key..Based on the time constraints(1,2,3) of an infotype the keys are judged (to retrieve data from an infotype)
In ABAP HR we also have lots of predefined function modules that can be used..eg:go to se37..put 'HR*' and press F4...
finally to update an HR infotype record we use the function module hr operation rather than direct updates...also there are standard audit trail reports that monitors various activities such as insert/modify/delete operations on an hr infotype record...
Pls revert back for clarity and reward if helpful
Regards
Byju

FCP 5.0.4 won't render all tracks.

FCP 5.0.4 fails to render all of my tracks. There are three, and in some places, four video tracks. It only renders the third and fourth tracks. Plays fine in the timeline but will not output in any format. Audio is fine. Video is all black except where there are three or more video tracks, the topmost tracks play fine.
I have trashed FCP preferences, uninstalled and reinstalled FCP - no change. The source files are fine, as I can play them in Quicktime with no problem. They even play on other machines.
Any ideas? Please don't tell me to trash the preferences, as I've already tried that.

I've been pullin' my hair out lately with the whole render issue as well. MAY have just stumbled onto a solution a few min ago. I looked at the permissions settings on the external disc that I'm using as a scratch disk. It was set to read/write for everyone under the sun. I thought I'd just propogate those permissions one more time to be safe and I got an error msg that said I couldn't propogate because some items won't let me. So, I checked IGNORE OWNERSHIP ON THIS VOLUME and voila. Render issue solved. However, I don't think this is the best way to solve the problem...but in a pinch...may just work for ya.
Good luck

Safari won't display "All Bookmarks"

Safari won't show the list of Bookmarks.
All I get is the small box in a footer bar with a + in it (add Bookmark Collection), and the previous page shows in the background of the window. The Bookmarks Bar is visible and works correctly, and the library of bookmarks can be exported, so they still exist.
If I try to open the "Show All Bookmarks" from the Bookmarks Menu with no window open, the result is a Safari page with the toolbar, Bookmarks Bar, address bar etc. showing but with a blank page in the body of the window. When I click on the Bookmark icon on the Bookmarks Bar, it will toggle to a page with "about: blank" in the address bar.
Safari is the latest version (3.1.2) which was updated a while ago.
This problem started today and updating to OS X 10.5.4 tonight didn't affect the problem.
Anyone else have this happen?

benjoh wrote:
i checked and don't have this file... is there anything else i can do?
It would be really very strange for you not to have the Safari .plist file ...
Try this: Open Safari, go to Safari > Preferences, go to the General section, and change the "New Window" setting to something different. If it currently is set to "Home Page," change it to "Empty Page," for example. Close the preferences window.
Now open a new Finder window. In the sidebar, click on the "house" icon with your username next to it. Open the Library folder in that window and then the Preferences folder inside that. Click the View menu in your menubar and choose "As List."
Click on the "Date Modified" column header, and click again on that column name if necessary so you have the most recent items at the top. The little triangle next to "Date Modified" will be pointing downwards, and the items at the top will have dates that say, "Today" with very recent times.
Did the com.apple.Safari.plist file appear at or very near the top of the list?

Transitions won't render all the time

When publishing my finished Captivate file, sometimes the transitions that I selected won't render. Or some will render and others won't. In order to fix it, I have to open my project, and go to each slide that needs a transition, change the transition to No Transition, then back to Fade, or whatever transition I was using. Then when I publish the file, I keep my fingers and toes crossed because it might or might not render them all. Is there a fix on the way to ensure that transitions are not ignored when rendering?

Hi,
Re-publish the project selecting "Force re-publish all the slides" checkbox in "Advanced Options:" of publish dialog.
Let me know if it resolves your issue.
Thanks,
Vikranth.

Roundtripping text between Indesign and Word?

I'm not exactly sure which forum this belongs on, so I'll start here.
Our company does a lot of repurposing. We pickup recipes from a magazine and publish them in a book, or vice-versa. Our current system of picking up this content is inefficient and requires the text to be restyled every time it gets picked up. We're trying to implement a workflow that will retain the styling and eliminate duplication, but I'm encountering a couple problems:
1) When pasting text from InDesign into a word doc, it retains the styles UNLESS those styles are pre-defined in word. For example, if the word template has a pre-defined style called Recipe - head and you paste text that has that style, the text will no longer have that style applied after pasting; it will be set to Normal.
2) I can use InCopy to pickup the text and then export to RTF, but the text comes into Word with all the formatting applied (sizes, fonts, colors, etc.). This makes it very hard for the editors to read when they're reviewing the copy and making changes.
So my questions are these:
1) Is there a way to map styles from InDesign to Word? I'd like to set up the word doc to have all the styles names without the formatting so it's easier to read. OR,
2) Is there a way to strip out all text formatting EXCEPT the style names themselves? We want it to retain the style names so we can map them to the InDesign styles when we import the text.
If anyone has dealt with these issues, I would really appreciate the help. My searching thus far has yielded little in the way of results.
Thanks in advance,
Matthew

Because I have very few translators who can work in ID, I use a workflow like this all the time. If you're handy with VBA, you can write a script that
will go through all of the styles in your exported RTF and replace the formatting in the InDesign styles with something much simpler. For example, I'll change all serif styles to TNR and all sans styles to Arial, because I can assume that my less technically competent translators who panic when asked to install a font would at least have those two fonts installed. I can change the paragraph indents and spacing to something much simpler than what is in the ID doc with a single click. When I place that translated RTF back into InDesign, I can replace the translator's, ah, "formatting choices" with the original style definitions, so I can simply Clear Overrides and get something pretty close to the original formatting, only requiring minor cleanup.
If you're not handy with VBA, and yet expect to use Word as an integral part of your workflow, I suggest that you get busy studying.
Edit: Actually, tagged text is a pretty good idea, if you're willing to do some post-processing. The kind of editor who insists on unstyled text in Word is unlikely to be willing to edit tagged text in a raw text editor (or to use TagEditor or some other tool intended for manipulating tagged text).
Message was edited by: Joel Cherney

Timeline won't render in Premiere Elements 12 (and music video editing advice)

I have a section of video I'm editing that won't render. I've read some similar threads but still have a question about how I can edit the clips to 'force' a render.
I'm running PE 12 on a Core i3 laptop running Windows 8, so not a huge amount of processing power. I don't have an orange line above the timeline over these clips and I understand PE has decided that it's already giving me the best possible preview quality and doesn't need to render this section. However, it's four quick edits in time to some music and when I preview it back my computer clearly can't process the video and audio fast enough because I get very jerky video so I can't verify that the cuts are perfectly aligned to the drum beats.
I've been exporting the whole four minutes just to review about five seconds of video in the middle to make sure it's synched, and this is getting really frustrating as I'm having to make frame by frame adjustments to improve the sync.
Is there anything I can do to each clip, like adjust an image setting, to force PE to give me an orange line and want to render this section?
Just as an aside to anyone who edits music video type clips - if you're making, say, four quick cuts to four drum beats in a bar, do you find the audio/visual sync works best if the cut is on the frame the drum beat attack starts on, or does it seem more natural if it's one or two frames after the initial attack so it's 'mid drum beat'? I'm tending to find just after the initial attack looks/sounds better for me - but maybe that's something to do with the delay in my PC processing the frame!
Thanks for any advice,
Chris.

Chris
Please excuse the questions, but I did not want to take anything for granted...are you sure that you are looking above the Timeline content for the render indicator line? Assuming that you are OK with that.....
Are the gray tabs of the Work Area Bar placed so that they span the entire content of the Timeline, including this five second content which you say cannot be rendered. Remember rendering does not fix problems, rather it is a preview that helps you to realize that a problem exists sooner than later. Consequently, please confirm if an orange line persists over that five second content even if you press the Render key above the Timeline.
Have you expanded the Timeline content to the maximum with the Zoom Out Zoom In Slider above the Timeline get the best look at the content on the Timeline in contrast to get the best possible preview in the Edit area monitor?
Have you gone to Edit Menu/Project Settings/General and set the Audio Display Format to Milliseconds if you are involved in audio edits?
Have you been nudging audio in sync with video using shortcuts, such as...
As you hold down the Alt key of the computer main keyboard, tap the left or right arrow key once (one tap = 1 frame nudge)
As you hold down the Shift+Alt keys of the computer main keyboard, tap the left or right arrow key once (one tap = 5 frames nudge)
I would suggest that exploration and experimentation are the best tools with which to work to achieve a specific effect for your specific
situation.
Please review and then let us know if any of the above targets your questions about your workflow.
Thank you.
ATR

Ever since I downloaded OS X Mountain Lion on my iMac, the Safari won't often (most of the time) and I have to restart to open a web page. What is going on? What can I do?

Ever since I downloaded OS X Mountain Lion on my iMac, the Safari won't open. It loads half way and then stops. Same thing happens when we try to open a web page. If I restart the computer, it will then work. What is going on? What can I do? Help!

It will but it's only a temporary fix, ideally you should get a large external drive and move your photo library to it, do this (info)
Apple Menu>About This Mac>More Info>Storage, you will get a graphic that looks like the one below, post it here.

I have update my Mac to OSX 10.9.1 Maveric, all text in sidebars and others have been decreased.Why? How to get back the size?

I have updated my Mac to OSX 10.9.1. All text in the bars have been decreased in size after the installation. How can I get back the former size?

In the iCloud preference pane, sign in to the same account you use on the other devices, if you haven't already done that. Then check the box marked Contacts.

Safari won't let me left click mouse and scroll down page

Safari won't let me left click on the mouse and scroll down the page, which I can do in Internet Explorer. That means I have to manually click on the scroll bar on the right side of the website.

Hopefully it's a cache issue not your Magic Mouse.
Quit Safari.
Go to ~/Library/Caches/com.apple.Safari
Move the Cache.db file from the com.apple.Safari folder to the Trash.
Relaunch Safari.
This seems to be a "feature" of Safari
No.. it's not.

Pre and Code tags buttons... ?

I've asked about the addition of buttons for the code and pre tags before (must have been one of the recently deleted posts, or the search is broken or something), and been told that it was being considered for the next version of Jive.
Unless I'm missing something obvious, it looks like those buttons (I was hoping them to be next to the bold, italics, underline, etc buttons) have not been included in the latest version. Any chance that they might be?
Edited by: Boneist on Aug 24, 2008 10:59 AM

Hi,
Just arrive after the upgrade.
Jive must have those "buttons".
SAP is using also Jive to power the Forums on [http://sdn.sap.com] and that functionality exist. (they do not have the "Rich text" Editor)
so, lets try (you must eliminate the spaces on between the brackets (I think that is the name of "{" and "}"
{ code } Displays the line as programming code { code }
Example { quote }Displays the text "Example" in italics with a special background { quote }
Example Something similar to the quote can be achieved putting ">" (without quotes) at the beginning of the paragraph
ExampleThere are other tags (change of size, color, font, links to threads, messages or users) but I think those are the ones you were looking for

PRE and CODE tag lost carriage return?

It looks like content wrapped by PRE and CODE lost carriage return, for example in this thread. All text become on straight line.
Tracing a session by its connection
I can verify it looked ok when I post them this afternoon PST. However something changed since then, I also checked some post by other users, same thing.
Not sure if other users can observe the same problem.
Also interesting thing for example in this post
Please Help with Timestamp Trouble
some user's post has return problem, some user's posts are ok.

Like i said it was working ok until i post this message.
Here's testing of both wrap, < indicate my carriage return.
PRE
select a looooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
ooooooooong query way off your screen.CODE
select a looooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
oooooooooooooooooooo<
ooooooooong query way off your screen.

Safari won't play all media files.

As the title says I can't play all media files on different web sites. Web sites like SoundCloud and YouTube gives a message about Flash blocker browser setting/plugin error etc. Some files can be played and some can't but this matter only concerns video and audio files. When I go to 'Help -> Installed Plug-ins' there's a '(protected)' text in the 'QuickTime plug-in' list right after 'AAC Audio - m4p' and 'Video - m4v'. I think there's the problem but how can I edit these settings?
This problem came up after downloading the version of Adobe Flash Player. I have installed the latest Adobe Flash Player again and tried to reboot my Mac but it's not helping. I also found doubles of Flash Player from 'Macintosh HD -> Library -> Internet Plug-Ins' folder and deleted older file but neither that didn't help.
This is the QuickTime plug-in list copied from Safari's 'Installed Plug-ins' page:
QuickTime Plug-in 7.7.1
QuickTime-liitännäisen avulla voit katsella monenlaista verkkosivuilla olevaa multimediasisältöä. Lisätietoja saat QuickTimen verkkosivustolta. — tiedostosta ”QuickTime Plugin.plugin”.
application/sdp
SDP stream descriptor
sdp
application/x-mpeg
AMC media
amc
application/x-rtsp
RTSP stream descriptor
rtsp,rts
application/x-sdp
SDP stream descriptor
sdp
audio/3gpp
3GPP media
3gp,3gpp
audio/3gpp2
3GPP2 media
3g2,3gp2
audio/aac
AAC audio
aac,adts
audio/ac3
AC3 audio
ac3
audio/aiff
AIFF audio
aiff,aif,aifc,cdda
audio/amr
AMR audio
amr
audio/basic
uLaw/AU audio
au,snd,ulw
audio/mid
MIDI
mid,midi,smf,kar
audio/midi
MIDI
mid,midi,smf,kar
audio/mp3
MP3 audio
mp3,swa
audio/mp4
MPEG-4 media
mp4
audio/mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/mpeg3
MP3 audio
mp3,swa
audio/vnd.qcelp
QUALCOMM PureVoice audio
qcp,qcp
audio/wav
WAVE audio
wav,bwf
audio/x-aac
AAC audio
aac,adts
audio/x-ac3
AC3 audio
ac3
audio/x-aiff
AIFF audio
aiff,aif,aifc,cdda
audio/x-caf
CAF audio
caf
audio/x-gsm
GSM audio
gsm
audio/x-m4a
AAC audio
m4a
audio/x-m4b
AAC audio book
m4b
audio/x-m4p
AAC audio (protected)
m4p
audio/x-midi
MIDI
mid,midi,smf,kar
audio/x-mp3
MP3 audio
mp3,swa
audio/x-mpeg
MPEG audio
mpeg,mpg,m1s,m1a,mp2,mpm,mpa,m2a,mp3,swa
audio/x-mpeg3
MP3 audio
mp3,swa
audio/x-wav
WAVE audio
wav,bwf
image/jp2
JPEG2000 image
jp2
image/jpeg2000
JPEG2000 image
jp2
image/jpeg2000-image
JPEG2000 image
jp2
image/pict
PICT image
pict,pic,pct
image/png
PNG image
png
image/tiff
TIFF image
tif,tiff
image/x-bmp
BMP image
bmp,dib
image/x-jpeg2000-image
JPEG2000 image
jp2
image/x-macpaint
MacPaint image
pntg,pnt,mac
image/x-pict
PICT image
pict,pic,pct
image/x-png
PNG image
png
image/x-quicktime
QuickTime image
qtif,qti
image/x-sgi
SGI image
sgi,rgb
image/x-targa
TGA image
targa,tga
image/x-tiff
TIFF image
tif,tiff
video/3gpp
3GPP media
3gp,3gpp
video/3gpp2
3GPP2 media
3g2,3gp2
video/avi
Video For Windows (AVI)
avi,vfw
video/flc
AutoDesk Animator (FLC)
flc,fli,cel
video/mp4
MPEG-4 media
mp4
video/mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/msvideo
Video For Windows (AVI)
avi,vfw
video/quicktime
QuickTime Movie
mov,qt,mqv
video/sd-video
SD video
sdv
video/x-m4v
Video (protected)
m4v
video/x-mpeg
MPEG media
mpeg,mpg,m1s,m1v,m1a,m75,m15,mp2,mpm,mpv,mpa
video/x-msvideo
Video For Windows (AVI)
avi,vfw
Thank You!

Thanks for your reply baltwo!
It didn't even skipped my mind to look for an answer from System Preferences. Nevertheless it didn't help. When I open 'Trusted Location Settings' it just gives me blank window..
Help still needed.

Safari won't render site

Hi all,
i have a problem loading this site:
http://muniche.linde.com/International/Web/Linde/like35lindecrde2.nsf/%28scripte lements%29/googlemap.htm
has anyone a idea, why this won't work?
Thanks,
egon

Hi ...
Quit Safari.
Go to ~/Library/Internet Plug-Ins
Move the Adobe PDF Browser plugin from the Internet Plug-Ins folder to the Trash.
Relaunch Safari. Try a PDF file.

Safari 4 won't render all text between pre and /pre tags

Similar Messages

Maybe you are looking for