Safari 5.0.5 can't enter username/password in a secure website...

Safari 5.0.5
I can't enter my username or password in a secure website.
https://hbi.ingplans.com 
Username and password fields will not populate (I can select username login preference).
The site works in Firefox and I can log into other secure sites in Safari.

Maybe looking at the source would give a clue to the problem. I didn't go through the code to try to debug it but it appears to be an initialization problem.
Anyway, if you select SSN then Username (or vice versa), it unlocks the fields.

Similar Messages

  • HT1212 my ipod screen is cracked and i can't sync my ipod on to itunes becauseit it is locked with a password and i can't enter the password because the heat sensor is messed up and i don't want t restore it and lose everything so how can i get passed tha

    My ipod screen is cracked and i can't sync my ipod to itunes because it is locked with a password and i can't enter the password because the heat sensor is messed up on the ipod becasue of the screen and i don't want to restore it and lose everything. What can i do?!

    All you can do is to restore and thus erase the iPod unless you can get a data recovery company to preserve the data.
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Can we avoid username/password screen using run_product

    can we avoid username/password screen using run_product while calling a report from the form.
    how we can use the same login as in form.
    regards

    You can turn security off from your process.
    Go under adminui under Services/Application and Services/Service Management.
    Search for your process and under the security tab you can disable the security or use the 'Run As' feature to run under a specific user context.
    Jasmin

  • IOS7 - After taking a photo the lock screen zooms in and I can not enter my password. Does anyone know why?

    Everytime I take a photo on my phone either when it is locked or not, when I come back to my phone to use it next the lock screen has zoomed in and I can not enter my password. I have to either switch the phone off or keep playing with the side button. Its only happened since iOS7 has been installed. Can anyone help?

    On the Home screen, double-tap with three fingers to exit zoom.
    Then go to Settings > General > Accessibility and make sure Zoom is turned Off.
    http://support.apple.com/kb/ts3129

  • Oct 22, 2013 11:58 PM downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guid

    Oct 22, 2013 11:58 PM 
    downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guidance.........running 10.8.5 til today................????????  Can run in safe boot, but what do i do now ???  thanks
    MacBook Pro, OS X Mountain Lion (10.8.3), Intel core i5 2.3GHz 

    Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
    SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

  • Downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'

    downloaded 10.9  all well 'til I get desktop and can't enter my password, message of error, and it shuts down:  reboot and error reappears"your computer     restarted because of a problem. touch any key.....etc'  75-yr-old needs guidance.........thanx
    running 10.8.5 til today........................????????  Can run in safe boot, but what do i do now ???  thanks

    Well, after some thought, I did a 'safe boot', did a disk verify and repair in Disk Utility, repaired permissions in DU and had the same problem I'd mentioned in post.
    SO, I went back in (safe boot.........that is, hold down start button, then 'shift') and went to applications and removed or uninstalled any apps that I thought might be interferring with the re-boot or, specifically, with my being unable to sign in with my p/w.........(at the first key stroke, it would crash and give the 'error' message)....I had both Webroot and Dashlane installed that I thought could interfere with password recognition (Webroot protects from viruses, et all and Dashlane is a password codifying appl.) I took out whatever else I thought might not be friendly and, guess what ?? When I signed out of 'safe' mode, and rebooted normally, it worked.........and has been working properly for 3-4 hrs now, so guess it's good-to-go..........seems like it...........hope this helps anyone with the same problem I'd had...........no need to visit "genius bar" some 55 miles from here............guess us mid-seventies guys ain't too old for learnin'...........G'Day, Mates !!

  • Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do

    Greetings, I have an iPod Touch, that I recently tried to access the apps store. I can't enter my password, due to not being able to switch the keyboard to lower case letters. I tapped on the arrow up button, and it makes a click sound, but the letters do not change. Am I doing something wrong?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Can't enter my password

    HI,
    I CHANGED my font from English to Persian but my password is in English and I can't enter my password now. How can I change my font before enter my password to use my phone,? Why can't I use my key board setting for change the font?I really unsatisfied to Sony for this problem.please help me

    Sounds like you need to perform a system repair but for feedback of this nature you can either contact Xperia care or forward it to Google as I'm sure the same happens on other OEM's and Googles own devices however
    Performing a system repair using PC Companion - This will factory reset your phone and erase all data
    Switch off your phone and unplug from Pc (Hold volume up and power for around 10 seconds)
    Start PC Companion and select Support zone then Update my phone/tablet then in Blue Repair my phone/tablet and follow the on screen instructions - When prompted connect your phone still switched off holding volume down or back button - This should start the repair or reformat process
    If you are using Windows 8/8.1 or a 64bit operating system then adjust the settings for PC Companion and run in compatibility mode and chose Windows 7 or XP

  • I want to enter the password for a secure WIFI network on several iphones.  If I do this, can the end users somehow extract the ip address and password for the wifi network from the iphone and use it from a pc (at home, for example)?

    I want to enter the password for a secured wifi network on several iphones.  If I do this, is it possible for the end users to somehow extract the ip address and password information and use it from a pc/laptop/other mobile device.  For security reasons, I don't want them to be able to to this.
    Please advise,
    Thanks.

    If you look at the top left of your screen you will either see a 3G (or 4G if you have AT&T) or you will see the wi-fi symbol.  If you don't see the wi-fi symbol you are connecting to Gmail through your cellular data plan, not via wi-fi.
    To answer your question, it doesn't happen often but when it does the steps I mentioned above will normally resolve it.  Hopefully you won't have any further problem with this.

  • What is username/password for Enterprise Management Website?

    Alright. I just installed the J2EE and Web Cache Install only of 9ias 9.0.2. However, I get done, and I try to access the Enterprise Management Website which by default you can get to at http://machinename.yourdomain:1810...that's what the installation program/script says...and it's correct. But nowhere in the documentation (and I cannot find the 9ias Administrator's guide anywhere on this website) does it tell you what the default username/password is for this website. Is this hardcoded into a file somewhere? What exactly is the default username and password...because it isn't blank?
    See, little tiny things like this is what bug the living daylights out of people who would otherwise be getting things done...and Oracle's software is riddled with stuff like this.

    The user is ias_admin and you should have been prompted for the password during the install.
    Good Luck!

  • HT201401 How many times can I enter a password if my child has forgotten it?

    My child set a password on a disconnected phone that he was using as an ipod.  I am trying to unlock it.  How many times can I enter a wrong password?  Is there a limit and what are the consequences?
    Thanks!

    Depends. Passcode can be set to erase all data after 10 failed attempts. If you repeatedly enter the wrong passcode, your iPhone, iPad, or iPod touch will be disabled for longer intervals before you can try again. After too many unsuccessful attempts, you won't be able to try again until you connect it to the computer with which you last synced it.

  • HOW CAN I GET USERNAME,PASSWORD,HOST STRING?

    I have installed oracle 9i personal edition, when i tried to open sql plus, i was asked to fill username,password and host string. When i type anything it shows error message ora-12154.Is anyone can help me? Thanks

    The error you gave can appear for lots of reasons.
    You don't give any information about how the install
    went - did you check the logs for errors? Have you
    shut the machine down since you did the install?
    Are you actually running SQL*Plus on the same machine
    as the database? Is your database running? Can you
    connect using "/ as sysdba"? What hints that even
    a simple google search gives did you try?
    -- CJ

  • How can i specify username/password while creating a virtual directory

    Hi,
    i m trying to create a virtual directory in 9iAS on a mapped drive. How can i specify which username password to use to enable to connect to the network mapped drive. Is there any way where we can specify username / password ???
    thanks
    Unmesh

    9iAS R1
    Run the report service as a local account with administrator rights.
    On the target server, create a local account with the same user name and password.
    Now you can use the hidden shares ($) for example:
    &destype=file&desname=\\servername\d$\report_output\report.pdf
    9iAS R2 and 10g
    Pretty much the same thing except by default, the report server runs inline. I have not been able to get the entire service to run as a particular user. To get around this, I created a report server service and do not run the reports in process. It uses the separate service.
    rwserver -install rep90_name
    edit <ORACLE_HOME>\reports\conf\rwservlet.properties file.
    SERVER_IN_PROCESS=NO
    SERVER=rep90_name
    Edit service for rep90_name and change it to run as local administrator user you created on both servers and then start the service.

  • Can't Enter network Password

    I just plugged my Appletv in and selected the language. It found my network and I am now at the keyboard screen to enter the password. It makes a sound when I press buttons on the remote, but it never moves... It stays on"A". Is there something I need to be doing to be able to enter the password with the remote? If I want to tray another network without a password, How do I get back to that screen? Do I just Unplug it? Help Please

    trying to set up my apple TV and it asks for a wireless password / do not have one / tried "none" and "password" no luck / I can not get past this / Is thgere adefault password???

  • Can't enter Hex Password 40/64

    Visiting son's who has Microsoft 500 wireless router with WEP 64 bit password. I access WiFi nets all over the place with my Powerbook G4 with OS 10.4.8 but can't get the password accepted. I've seen post & document that say enter $ before hex 10 digit password, but the box on the pulldown menu won't let me enter a "$" in that field.
    Help!

    Cross platform WEP can be very troublesome. Probably the best thing to do is to convince your son to switch to WPA and forget about 64 bit WEP. 64 bit WEP is easily defeated.
    At a minimum have your son switch to 128 bit WEP.

Maybe you are looking for