Safari 5.0.5 OSX not remembering cookie settings after reboot

Hi everyone,
I'm having a very frustrating issue lately with Safari 5.0.5 on my MBP with OSX 10.6.7...
I want to have my cookie settings under Preferences -> Security -> Accept Cookies to permanently be "Only from sites I visit". When I started Safari, and set that setting, it will remember the setting for the entire machines' session. However, if I reboot, or shutdown/restart my Mac, it will revert to the Always setting.
I have tried trashing the Safari plist file under ~/Library/Preferences/, and trashing the associated caches.db file as well, hence resetting Safari, with no success.
Any advice on this would be greatly appreaciated!
Cheers

Hi Andy,
I just tried to temporarily remove Safari Cookies, and I'm sad to say the old issue re-occured as soon as the add-on gets uninstalled.
It seems also, that after launching Safari for the first time after a reboot and going into Safari Preferences fast enough before the add-on launches, the setting is still incorrect, but then gets modified by Safari Cookies.
I went and checked my Login Items, but there's nothing there that can affect Safari; the list hasn't changed in a long time. I don't have folders .../InputManagers or .../ScriptingAdditions under Home/Library.
Under .../LaunchAgents, I have the following:
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.CSConfigDotMacCert-<blocked>-SharedServices.Agent.plist
com.apple.FolderActions.enabled.plist
com.apple.FolderActions.folders.plist
com.apple.FTMonitor.plist
com.apple.imagent.plist
com.apple.marcoagent.plist
com.google.GoogleContactSyncAgent.plist
com.google.keystone.agent.plist
`
The first three are related to my Adobe CS5 and Acrobat X Pro installations.
Now that I have the add-on which seems to keep things in check, this isn't as high a priority as it was, but I would definitely love to find out what's causing this so I can eventually nip it in the butt!
Cheers

Similar Messages

  • Safari do not remember my settings

    I am using Safari 6.0.1 on OS X 10.8.2, Safari dose not remember:
    my toolbar arrangement
    other setting like the default search engine, homepage, etc....

    Hope tip from this discussion thread helps.
    https://discussions.apple.com/thread/3695817?start=0&tstart=0

  • Safari not remembering preference settings

    safari not remembering preference settings

    Triple-click the line below to select it:
    ~/Library/Preferences/com.apple.Safari.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info
    from the contextual menu. An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?

  • Premiere CS6 does not remember some settings when saving custom export presets.

    When I save a custom export preset in the export window, some settings are not remembered, and I need to change them every time again and again! The settings so far I found to not be saved are:
    Key frame every ... frames
    Limit data rate to ...

    Interesting...
    When I create and save an a H.264 QT preset
    using the Export Settings dialog from within Premiere,
    it does not save the key frame interval or max bitrate.
    However, when I create a H.264 QT preset from within
    Media Encoder and save... the missing settings are saved
    and can be recalled from within the Premiere Export Settings dialog.
    EDIT:
    Re-tested this a bit more, and now the kf interval & max bitrate are
    being saved with the presets created in Premiere Export Settings dialog.
    Odd... my first 2 tries didn't take?

  • Upload to FTP Host... not remembering ftp settings

    Upload to FTP Host works well, but the settings are not remembered for subsequent uploads.  How can I save the FTP Upload settings in Muse 2.2 for re-use?

    Sachin,
    Thank you for your note.  My installed version of Muse version 2.3 does not remember any of the FTP settings in the Upload to FTP host… dialog box.  This behavior is contrary to your report that Muse remembers FTP credentials.  From my repeated experiences this function has no retention of previous dialog entries.
    How can I make the Upload to FTP Host… remember the FTP site login, password, etc.?

  • Save for Web does not remember quality settings

    Hello,
    I just about PSE8 today and Im on a mac with Leopard.
    PSE does not remember the quality settings when "save for web".
    The quality is 0 every time Im saving. Even if I change to 100 it does not remember it.
    Can you help please? Im far from being an expert here.

    function(){return A.apply(null,[this].concat($A(arguments)))}
    However in my library-folder/preferences folder I found 5 folders or files which are connected to adobe.
    "write and read" is activated on all and Im the main user on this mac.
    There is even one file called "Adobe PSE für Web speichern 6.0 Vor" so pretty much like "save for web". On this one I can write and read as well.
    On Windows, there is a preferences file that is stored in the proper location for such files:
    C:\Users\Ellis\AppData\Roaming\Adobe\Save For Web PSE\4.0\Adobe Save For Web PSE 4.0 Prefs
    PSE has no problem writing that file.  This sounds similar to the file you found.
    However, there is another file that Save For Web tries to write:
    C:\Program Files\Adobe\Photoshop Elements 6.0\Settings\Recently Used Optimizations.irs
    It is this file that is located improperly, in Program Files, which is supposed to be only for read-only executables (.exe), dynamic link libraries (.dll), and other read-only assets live.  Programs normally don't have write permissions for these folders, so Save For Web fails to save its preferences.  Perhaps there is something similar on the Mac.  (I'm not an OS X expert, so I can't help with the Mac conventions of where things are kept.)

  • Bridge not remembering metadata settings

    I use CS6 and I'm finding that Bridge is not remembering the metadata properties I set in Preferences. Once I reboot my PC, it forgets them.
    Any idea what might be causing this?

    If you have start Bridge at launch enabled you closing proceedure should work.
    Have you tried setting your panels where you want then saving this as a workspace?

  • IMac not remembering printer settings

    I have created a default profile for my printer and the iMac is not remembering it unless I select the 'Printer' button.
    How can I get the iMac to remember the settings in the default profile with out the need to click on settings.

    Hi,
    Try changing the default print settings using the CUPS web interface:
    Go to http://127.0.0.1:631/printers and click your printer name.
    Click the Administration drop-down menu and select "Set Default Options".
    Select the Duplex option and select the binding type you would like to use.
    Click the "Set Default Options" button when you are done and provide your administrator user details when prompted.
    Make sure to reboot the Mac and try printing from your browser again..
    Best of luck
    Shlomi

  • MBPro NOT remembering WiFi name after powering up

    I'm on 10.9.3. I've noticed in the last week that my Mac is not remembering my WiFi network after the Mac is powered up from off (i.e., COLD power up vs. reboot). While it doesn't happen every single time, it has been happening fairly often over the last 1.5 weeks. Nothing has changed on my gateway or router and my iOS devices have no problem at all remembering my WiFi network name. ??????

    Hello Actually Human,
    The article linked below provides some useful troubleshooting steps that can help resolve issues with connecting to your Wi-Fi network.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Cheers,
    Allen

  • Not saving settings after reboot.

    Everytime I reboot, the language settings are reset ( I had 3 other languages).
    Also some of the apps I recently purchased are not remembering login or licence.
    Anyone with the solution please?

    Originally Posted by devsfan1830
    The old workaround we needed when Win 8.0 came out still works. Set up all your settings. Put PC to SLEEP. Wake up, then reboot. From then on your settings should stick and sound remain working between boots. Kinda silly we need to resort to this on what amounts to a service pack, but lets face it. No one else is making audio cards these days so Creative can pretty much afford to not give a crap. Although at this point I wonder if I should just switch to on board sound and be done with all this mess.
    This did not work for me. I tried everything to get it to work. I ended up replacing the card with the new ZX and after the sleep trick this card seems to be working.

  • Vertical taskbar width does not hold the width after reboot

    Hi.
    I wonder if anyone could help me with this. I've been trying to google the answer for hours but no luck.
    I use the desktop with taskbar on the left side not on the bottom. I'll explain why just to cut questions. Simply because it makes more sense to me to have it on side rather than bottom with 16/9 format of display. I also work with many windows open at the
    same time and this way I can have 15 of them on the taskbar without grouping.
    Problem.
    I need the width of the taskbar to be wide enough at least for 3 icons of the quicklaunch section. Below this width there is not enough space for quick launch icons to fit in the area. I could increase the area but then it uses space for the open windows
    tabs and also date/time are not displayed fully. 3 icons is what makes sense for vertical taskbar. Every time I change the width of the taskbar to 3 it goes back to 2 after reboot. No matter whether I lock it or not!
    question.
    Is there any way of setting the minimal height ( in my case width of the taskbar as it is positioned vertically on the side) in the registry? I mean can I enter somewhere " do not go below bloody 3 icons after reboot ! " in the registry  :)
    There must be default value somewhere there  and this is why it keeps going back to it. If only I knew where is it I could increase it to suit me.
    I know it might seem to be silly question but after resizing the taskbar 2 348 times over the past years eveytime I turn the computer on I have had enough.
    I would be very gratefull if anybody could help me. Thanks in advance.

    Refer :
    http://social.technet.microsoft.com/Forums/windows/en-US/2b0ba279-0ded-49b2-b003-713a65e3d645/vertical-taskbar-width-resets?forum=w7itproui
    Arnav Sharma | Facebook |
    Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
    reading the thread.

  • Oracle SSO not showing up status after rebooting the 10gapplication server

    Hi all,
    I installed 10g R2 10.1.2.0.2 application server RHEL AS 4.0 2.6.9-11 kernel.
    After the successful installation IM and MR and MT (BI). All the components in the MT and infrastructure was showing up status. After rebooting the machine i executed the following commands
    For Infrastructure
    1.     To make the metadata repository up and running
    Log in as an oracle user
    #cd /home/oraASInfra/bin
    #export ORACLE_HOME=/home/oraASInfra
    #export ORACLE_SID=mamcinfr
    #./lsnrctl start
    #./sqlplus
    Enter userame: sys as sysdba
    Sql>startup
    Sql>Exit
    2.     To start the other components of the infrastructure
    Log in as an oracle user
    #cd /home/oraASInfra/opmn/bin
    #./opmnctl startall
    3.     To start the iasconsole
    #cd /home/oraASInfra/bin
    #./emctl start iasconsole
    For Middle tier
    1.     To start the middle tier components
    Log in as an oracle user
    #cd /home/oraASmt/opmn/bin
    #./opmnctl startall
    2.     To start the iasconsole
    #./emctl start iasconsole
    In the MT all the components is showing up status
    In the Infrastructure except oracle sso OID , HTTP server and OC4J security is showing up status.
    There is no any port conflicts between the infrastructure and MT.
    Is there any post installation tasks has to be done after the installation?
    please help me to sort out the issue.
    thanks,
    C Saju

    1. After RapidWiz with 11.5.10.2 CDs, do we need to
    do any post installation step to make the browser
    load Oracle Forms. Do we need to create our own
    certificate using envshell.cmd and then adjkey. And,
    apply that to Jinitiator using adjbuild.sh and
    regenerate JAR files using ADADMIN Jar ( I am so far
    assuming that these steps are not necessary after for
    rapidwiz install of 11.5.10.2 )Your assumption is right. You do not have to do anything
    2. Do I need to apply the Oracle App 11i 11.5.10.2
    Maintenance Pack after installing using RapidWiz from
    the main set of CDs labeled as 11.5.10.2No
    3. Should I try by installing manually latest
    Jinitiator 1.3.1.21 or 1.3.1.25You do not have to upgrade your jinitiator version unless you want to go with the latest one.
    Since (adsign.txt, appltop.cer, and identitydb.obj) do not exist in your system, you just need to initialize the java certificate as follows:
    adjkey -initialize
    This will create the following files:
    - adsign.txt directory $APPL_TOP/admin
    - appltop.cer direcotry $APPL_TOP/admin
    - identitydb.obj directory $HOME of the user that launch adjkey
    Metalink note: 365735.1 should be helpful.
    Good luck

  • Cookies missing after reboot

    I'm running windows XP and lately all cookies were deleted every time I reboot my computer. All cookies, and default settings are gone after reboot, I even switched back to IE8 and same issue noted on both IE8 and Firefox 3.6.12

    Again and again!!!I reformatted my usb drive and created a brand new safepoint.
    everyting was ok but two days after, the system has rebooted (no warning and I don't know why) and my Safepoints are missing in the dashboard.
    Obviosly in the WDMyCloud desktop app the SP are visible... Frustating! :-(

  • Safari toolbar not remembering custom settings.

    Anyone else seeing this bug?
    Whenever I customize the Safari toolbar (mainly to remove the bookmark button from the address bar) Safari will reload the default toolbar (but with Evernote clipper and 1Password and Delicious buttons) after a quit and re-open.
    It happens on both my iMac and Macbook.

    Hi
    A corrupt preference file seems to be at the root of the "disappearing icons". On both machines, via the Finder: Your User Account>Library>Preferences folder. Move the com.apple.safari.plist file to the trash, then restart Safari. This resets Safari preferences to default values. Restore any custom settings in either the Preference panel, Edit (spelling), or View Menu. Also, restore any custom icons.
    Also, the reset adds Apple default bookmarks to your Bookmarks collection (command/option/B keys). Delete any you don't want.
    Post back

  • CS5 will not remember print settings

    Have upgraded from cs3 and cannot get cs5 to remember my print settings. In cs3 when I open a file to print it, the print driver automatically uses all the settings specified the last time I printed and saved the file. In cs5 the driver uses the settings specified for the last file printed. Anyone know how I can fix this?

    Gaarhhhh, of course it would be something so stupid and simple...something I'd never think of.
    Yeah, by docking I meant maximizing, I've been doing too much programming lately...
    And yeah, moving it to the other monitor and closing it without maximizing it worked, and what's more when I opened it the second time, I maximized it, then closed it, then opened it again and it opened, maximized, in the correct monitor.
    Still, seems like it could be a bug to me, CS3 always used to remember what monitor I opened the program in, whether I closed it maximized or not.
    Also, for completion's sake, I have an nVidia GeForce 8800 GTS with the most recent drivers (just installed them about 2 days ago.)
    Now I need to figure out how to turn off that stupid pixelation when I zoom in really far on an image...that's annoying.

Maybe you are looking for