Safari 5.1.7 can't connect itself to facebook ? certificate is invalid

I'm gonna be as simple as possible
I use safari 5.1.7 on windows, and suddenly, I can't connect to facebook with my Safari. it say the certificate is invalide, while all others navigators, google chrome, opera, firefox and Maxthon can connect to facebook very easily
so what can I do to get rid of this trouble forever.
thanks
Ho an will safari 6 ever come out for us, windows users ?

hey- on the discussions page, see the one I just posted to-https://discussions.apple.com/thread/4463114?tstart=0 at the end, a post by SG has

Similar Messages

How do I set the "When an OCSP server connection fails, treat the certificate as invalid" in Firefox for Android?

Due to the security concerns from Heartbleed and Steve Gibson's excellent coverage on certification revocation, I have set "When an OCSP server connection fails, treat the certificate as invalid" on my desktop Firefox and now want to do the same on Firefox for Android. I cannot find anything in the settings menu to allow this. Is it done through about:config and if so, what is the setting name there?

hello mcvickerp, in about:config you can switch the setting "security.OCSP.require" to true.

Safari 5.1.1 can't connect to the internet. Every other browser can.

I've tried resetting Safari, reinstalling Safari, and resetting my router to factory settings. Safari still can't connect to the internet, but everything else on my Mac (Snow Leopard 10.6.8) can.
I recently tried setting up Open DNS just because I've had problems with Comcast lately. But I've since returned DNS to be detected automatically.
Thoughts?

kextstat -kl | awk ' !/apple/ { print $6 $7 } ':
at.obdev.nke.LittleSnitch(2.2.05)
com.rogueamoeba.HermesAudio(3.0.2)
com.Cycling74.driver.Soundflower(1.5.1)
com.parallels.kext.prl_hypervisor(4.0
com.rogueamoeba.hermes(3.0.2)
com.parallels.kext.prl_hid_hook(4.0
com.parallels.kext.prl_usb_connect(4.0
com.parallels.kext.prl_netbridge(4.0
com.parallels.kext.prl_vnic(4.0
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
com.parallels.vm.prl_naptd
com.wibu.CodeMeter.Server
com.rogueamoeba.hermes
com.parallels.desktop.launchdaemon
com.orbicule.uc
com.mysql.mysqld
com.adobe.SwitchBoard
at.obdev.littlesnitchd
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
net.culater.SIMBL.Agent
com.parallels.desktop.client.launch
com.adobe.CS5ServiceManager
at.obdev.LittleSnitchUIAgent
at.obdev.LittleSnitchNetworkMonitor
com.google.keystone.user.agent
com.google.GoogleContactSyncAgent
com.adobe.AAM.Scheduler-1.0
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Sta}* 2> /dev/null:
/Library/Components:
/Library/Extensions:
/Library/Frameworks:
AECore.framework
Adobe AIR.framework
Compressor.framework
DSPPublishing.framework
Frameworks
FxPlug.framework
L6TWXY.framework
MacFUSE.framework
MediaServerAPI.framework
NyxAudioAnalysis.framework
PluginManager.framework
ProMetadataSupport.framework
Qmaster.framework
TSLicense.framework
WibuCmMacX.framework
WibuCmWebMacX.framework
XSKey.framework
iLifeFaceRecognition.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/Internet Plug-Ins:
AdobePDFViewer.plugin
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
JavaPlugin2_NPAPI.plugin
JavaPluginCocoa.bundle
NP-PPC-Dir-Shockwave
Quartz Composer.webplugin
QuickTime Plugin.plugin
Silverlight.plugin
flashplayer.xpt
nsIQTScriptablePlugin.xpt
/Library/LaunchAgents:
at.obdev.LittleSnitchNetworkMonitor.plist
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.adobe.CS5ServiceManager.plist
com.parallels.desktop.launch.plist
net.culater.SIMBL.Agent.plist
org.thebends.iphonedisk.mobile_fs_util.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.adobe.SwitchBoard.plist
com.apple.aelwriter.plist
com.apple.qmaster.qmasterd.plist
com.apple.third_party_32b_kext_logger.plist
com.mysql.mysqld.plist
com.orbicule.uc.plist
com.parallels.desktop.launchdaemon.plist
com.rogueamoeba.hermes.plist
/Library/PreferencePanes:
Apple Qmaster.prefPane
Flip4Mac WMV.prefPane
Growl.prefPane
MacFUSE.prefPane
/Library/PrivilegedHelperTools:
/Library/QuickLook:
ParallelsQL.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
.DS_Store
AppleAVCIntraCodec.component
AppleHDVCodec.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
AppleProResCodec.component
DVCPROHDCodec.component
DVCPROHDMuxer.component
DVCPROHDVideoDigitizer.component
DVCPROHDVideoOutput.component
DVCPROHDVideoOutputClock.component
DVCPROHDVideoOutputCodec.component
DesktopVideoOut.component
FCP Uncompressed 422.component
FLV.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
IMXCodec.component
LiveType.component
XVIDDelegate.component
iChatTheaterPreview.component
macam.component
/Library/ScriptingAdditions:
Adobe Unit Types.osax
SIMBL.osax
/Library/StartupItems:
ParallelsDesktopTransporter
Library/Address Book Plug-Ins:
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
Library/LaunchAgents:
com.adobe.AAM.Updater-1.0.plist
com.google.GoogleContactSyncAgent.plist
com.google.keystone.agent.plist
Library/PreferencePanes:
Hazel.prefPane
Library/QuickLook:
AnimatedGIF_QL.README.rtf
AnimatedGIF_QL.qlgenerator

Safari quits unexpectedly and can't connect to software updates

Hi, can anyone help? have never had any trouble with mac before but today it's been endless!
1. safari quits unexpectedly - takes much longer than usual to open safari then it suddenly quits after about 10 seconds
2. went to software updates but got message saying it couldn't connect for updates (internet is working fine and firefox runs no problem)
3. mail can't connect to gmail to send mail, can receive mail but can't seem to send
would be really grateful for any advice - i'm useless with IT so please make it simple! thanks!

Hi and welcome....
First, try downloading and installing the v10.6.5 Combo Update available as a standalone here.
http://support.apple.com/kb/DL1324
That download file size is nearly 1GB. Make sure there's plenty of free space on your Mac startup disk. Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 15% free disk space.*
If that won't work, follow the instructions here for help. Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
If you can't solve the problem, post a crash report so we can and help you.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Now copy/paste the entire contents of the Crash Reporter window into your reply here. If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
Might be a good idea to check System Preferences / Network - Assist Me - Diagnostics too. If you see any red buttons on the left, click Continue.
Another troubleshooting idea is to login to another user account on your Mac. Try Safari there. If it crashes there also, then it's possible there's a problem with the startup disk. Follow the instructions here to Use Disk Utility to verify or repair disks
Carolyn

Safari 5.1.2 can't connect to the server

Just a few days ago, my Safari 5.1.1 stopped loading pages, and I keep getting a "can't connect to server" error. Chrome and Firefox work just fine. My airport connection is clearly still working, and I can get mail as well. My family member's machine is running Safari with no issues.
I've tried reseting Safari, restarting my computer several times, and re-installing Safari, but nothing is working. The last thing I did the day before it happened was install Nik Color Efex pro 4, a Photoshop plugin, but that shouldn't affect anything. I installed it in the afternoon and Safari was running just fine the rest of the day. I also installed it on my family member's machine, and her Safari is still working perfectly.
I'm using the latest version of Snow Leopard (10.6.8) and am fully updated on everything else. I thought maybe the latest 5.1.2 would fix the issue, but it's still not loading pages. Any help would be greatly appreciated. Thank you.

Well, I figured out what it was. I must have accidentally blocked one of Safari's connections through little snitch. If anyone else has problems, make sure you aren't blocking Safari or Apple connections in little snitch config.

Safari 5.0.1 can't connect to proxy server (when 5.0 could)

Hi,
I use a MacBook Pro at home and at work. At work I have to access the internet via an http proxy server.
After updating Safari to 5.0.1 I now get a "Safari can’t open the page “http://www.openstreetmap.org/” because Safari can’t connect to the web proxy server (HTTP)." and then goes on to tell me how to access my proxy settings in System Preferences. Safari works fine at home, accessing the internet via ADSL.
Camino works fine, OSX Software Update works fine. I have the same problem with extensions enabled/disabled. I do have the WebSnapper plugin working but this was not a problem with 5.0. I have tried resetting Safari but to no avail.
Any ideas
Thanks
Iain

HI Ian,
Please click My Settings on the right side of this page and tell us which Mac OS X you are running. Thanks!
I do have the WebSnapper plugin working but this was not a problem with 5.0
Turn off Extensions, try Safari using that proxy server. That extension may have been compatible with the previous version of Safari, but not the latest update.
Carolyn

When I use Safari the computer says can't connect to server but I am connected to internet.

This morning I opened Safari and got this message. Can not connect to server (Google). That's funny I can use the internet and visit any site. Why am I getting this message?

What happens when you click this link, same thing? :
https://www.google.com

Safari 5.1.10 can't connect to server Version 4.1.3 Does - HELP!

Past week in 10.6.8 Safari 5.1.10 'cannot connect to a specific server normally used for FTP access (to reach an online cPanel)
(The problem arose in Freeway Express 6 with failed FTP uploads to that the same server, and apparently it has setup automatic blocks from the IP address
but
from the same ip address (via a router) an older MacMini 10.4.11 using the same upload info (url) IN SAFARI 4.1.3 can connect to cPanel log in window that the other computer cannOT reach.
This is based on difficulty over nearly 10 days inability to FTP access that server from the Mini running 10.6.8
I've proved to MH that that computer can successfully FTP to a DIFFERENT URL on a DIFFERENT server
and they are working on it now..
But what would cause one version of Safari to NOT access the same url as an earlier version CAN
copy paste same url into both...ONE ACCESSES
ONE DOES NOT.
WHY?

You moved plugins one at a time from the both user and root library folders already to test?
"If the issue is resolved by removing items from the above locations to a different location, return the items one at a time and test Safari. That way you can determine which item is causing the issue. Once identified, remove the problematic item and put the others back. Check for updates to the items that are found to cause issues, or report the issue to the add-on developer."
From here.

Can't connect Ping to Facebook

During the initial setup of PIng I was trying to connect it to Facebook but it came back with an error message. I checked the application settings on FB but it wasn't connected. So I went back to iTunes but now I don't have any option to try to connect to Facebook again!?
Any idea how I could "force" Ping to let me connect to FB again?! I was thinking about closing/deleting my Ping profile, but that doesn't seem to be an option either!?
(Even though I think Ping is a neat idea and a good start, this thing has a bunch of major flaws that Apple needs to address asap, before people start moving away again!)

Never mind -- looks like only after a few hours Apple pulled Facebook Connect from Ping…!
--> http://bit.ly/bgP17M

Why does Safari keep saying "it can't connect to the server" every time I try to access any sites?

I have the latest safari update for os x, which was working perfectly fine up until 3 days ago. Everytime I would try to access any site, safari would tell me it couldn't connect to the server, and I would have to refresh the page at least 5-10 times until I can access the site. I checked my internet, and it seems to be running perfectly. I also tried using Chrome and it had no problems accessing sites, too, so I know it's not my internet. :/
Is anyone else having the same problems?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

My i-pad is connected to my usual wi-fi but Safari is saying it can't connect to the server. what do I do?

One of my children's ipads is suddenly saying Safari can't find the server despite being connected to the internet. My other child sitting 1 foot away has no problem. What do I do to resolve?

I get that same issue in Safari from time to time on all of my iOS devices. What I do is to clear Safari, close the Safari app completely and then reset my iPad. It has never failed to work for me, so give it a try.
Go to Settings>Safari>Clear History and Website Data
Now close Safari. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Can't connect to wireless using certificate with Andorid device

Hi,
I'm trying to connect to my wireless network using an android device with certificate but with no success.
I'm using a WLC 4402 7.0.235.3
SSID Security (WPA2 Auth802.1X + CCKM)
Logs from WLC
(Cisco Controller) debug>*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Association received from mobile on AP 00:3a:98:7d:cc:30
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Clearing Address 10.10.168.3 on mobile
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 10.10.168.3 RUN (20) Skipping TMP rule add
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 apfMsRunStateDec
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 10.10.168.3 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Complete to Mobility-Incomplete
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Reached FAILURE: from line 5154
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Scheduling deletion of Mobile Station: (callerId: 9) in 10 seconds
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 pemApfDeleteMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [00:3a:98:7d:cc:30]
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1633)
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Applying site-specific IPv6 override for station 20:02:af:a6:0a:85 - vapId 3, site 'BPA-SEDE', interface 'wifi - ip phones'
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Applying IPv6 Interface Policy for station 20:02:af:a6:0a:85 - vlan 431, interface id 13, interface 'wifi - ip phones'
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Applying site-specific override for station 20:02:af:a6:0a:85 - vapId 3, site 'BPA-SEDE', interface 'wifi - ip phones'
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1633)
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 STA - rates (8): 139 22 24 36 48 72 96 108 12 18 0 0 0 0 0 0
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 STA - rates (10): 139 22 24 36 48 72 96 108 12 18 0 0 0 0 0 0
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Processing RSN IE type 48, length 20 for mobile 20:02:af:a6:0a:85
*apfMsConnTask_0: Jan 03 08:26:10.866: 20:02:af:a6:0a:85 Received RSN IE with 0 PMKIDs from mobile 20:02:af:a6:0a:85
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 apfMs1xStateDec
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 DHCP_REQD (7) Change state to START (0) last state DHCP_REQD (7)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 pemApfAddMobileStation2: APF_MS_PEM_WAIT_L2_AUTH_COMPLETE = 0.
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state DHCP_REQD (7)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state DHCP_REQD (7)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 8021X_REQD (3) DHCP Not required on AP 00:3a:98:7d:cc:30 vapId 3 apVapId 4for this client
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 Not Using WMM Compliance code qosCap 00
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:3a:98:7d:cc:30 vapId 3 apVapId 4
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 apfPemAddUser2 (apf_policy.c:223) Changing state for mobile 20:02:af:a6:0a:85 on AP 00:3a:98:7d:cc:30 from Associated to Associated
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 Stopping deletion of Mobile Station: (callerId: 48)
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 Sending Assoc Response to station on BSSID 00:3a:98:7d:cc:30 (status 0) ApVapId 4 Slot 0
*apfMsConnTask_0: Jan 03 08:26:10.867: 20:02:af:a6:0a:85 apfProcessAssocReq (apf_80211.c:5272) Changing state for mobile 20:02:af:a6:0a:85 on AP 00:3a:98:7d:cc:30 from Associated to Associated
*pemReceiveTask: Jan 03 08:26:10.873: 20:02:af:a6:0a:85 0.0.0.0 Removed NPU entry.
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 Station 20:02:af:a6:0a:85 setting dot1x reauth timeout = 0
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 Stopping reauth timeout for 20:02:af:a6:0a:85
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Connecting state
*dot1xMsgTask: Jan 03 08:26:10.874: 20:02:af:a6:0a:85 Sending EAP-Request/Identity to mobile 20:02:af:a6:0a:85 (EAP Id 1)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 Received EAPOL EAPPKT from mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 Received Identity Response (count=1) from mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 EAP State update from Connecting to Authenticating for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.880: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Authenticating state
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.881: 20:02:af:a6:0a:85 Entering Backend Auth Response state for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.886: 20:02:af:a6:0a:85 Processing Access-Challenge for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.886: 20:02:af:a6:0a:85 Entering Backend Auth Req state (id=2) for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.886: 20:02:af:a6:0a:85 Sending EAP Request from AAA to mobile 20:02:af:a6:0a:85 (EAP Id 2)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.888: 20:02:af:a6:0a:85 Received EAPOL EAPPKT from mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.888: 20:02:af:a6:0a:85 Received EAP Response from mobile 20:02:af:a6:0a:85 (EAP Id 2, EAP Type 3)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.889: 20:02:af:a6:0a:85 Entering Backend Auth Response state for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Processing Access-Reject for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Removing PMK cache due to EAP-Failure for mobile 20:02:af:a6:0a:85 (EAP Id 2)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Sending EAP-Failure to mobile 20:02:af:a6:0a:85 (EAP Id 2)
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Entering Backend Auth Failure state (id=2) for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 Setting quiet timer for 5 seconds for mobile 20:02:af:a6:0a:85
*Dot1x_NW_MsgTask_0: Jan 03 08:26:10.891: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Unknown state
*osapiBsnTimer: Jan 03 08:26:15.740: 20:02:af:a6:0a:85 802.1x 'quiteWhile' Timer expired for station 20:02:af:a6:0a:85 and for message = M0
*dot1xMsgTask: Jan 03 08:26:15.740: 20:02:af:a6:0a:85 quiet timer completed for mobile 20:02:af:a6:0a:85
*dot1xMsgTask: Jan 03 08:26:15.740: 20:02:af:a6:0a:85 dot1x - moving mobile 20:02:af:a6:0a:85 into Connecting state
*dot1xMsgTask: Jan 03 08:26:15.741: 20:02:af:a6:0a:85 Sending EAP-Request/Identity to mobile 20:02:af:a6:0a:85 (EAP Id 4)

Hi Scott,
I've made the change as you suggested and collected logs from MS NPS and I think that Authentication is failing
Authentication Details:
Connection Request Policy Name:          Use Windows authentication for all users
Network Policy Name:                    Wireless
Authentication Provider:                    Windows
Authentication Server:                    NPSServer.domain.local
Authentication Type:                    EAP
EAP Type:                              -
Account Session Identifier:                    -
Logging Results:                              Accounting information was written to the local log file.
Reason Code:                              22
Reason:                                        The client could not be authenticated because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.
Best regards,
Alcides Miguel

WiFi connected but message from mail and Safari "can't connect to server"

My WiFi went down and rebooted. WiFi connected on iPhone, IPad and MacBook Pro. The iPad gives an error message from mail, Safari and other apps, "can't connect to server". What is wrong and how do i correct settings on the iPad?

Hello MBreck47
There are a few more things you can try to troubleshoot issues with maintaining a connection to Wi-Fi. Check out the article below for those steps to resolve your issue.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Regards,
-Norm G.

Ipad2, can not connect to safari, cannot allocate memory

ipad2: can not connect to safari, cannot allocate memory
can not connect to itunes, cannot allocate memory
It has 6 GB space available
Already tried pressing both home and start buttons together. Did not help.

Jailbroken?

Some of my Mac apps can´t connect to the internet, while Firefox can

All of a sudden, Safari, ITunes, Software Update, can´t connect to the internet. It happens in my office and in my house. Have not checked other networks. Firefox wors fine, as does Mail (for now). What can be the problem?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up a guest account” (without the quotes) in the search box.
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
As Guest, test. Same problem(s)?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on some Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.) Post the results of steps 1 and 2.

Safari 5.1.7 can't connect itself to facebook ? certificate is invalid

Similar Messages

Maybe you are looking for