Safari 5.1 hotkeys with left/right arrows are not working!

I had my redefined hotkeys in Safari 5 for Select Next/Previous Tab (they were cmd+right/left arrow)
When I've updated to Safari 5.1 hotkeys stopped working that way, and now they are acting like Back/Forward
But Back/Forward are cmd+[ and cmd +]
Anybody with the same problem?
P.S I've tried to delete com.apple.safari.plist - no result

I ran into the same issue.
Had to go into the Keyboard pref. pane and reassign the tab ones to shift-arrow keys

Similar Messages

Calender's Left Arrow & Right Arrow are not displaying.

Hi All,
My issue is in the calender of WebUI, to see the last month we click Left Arrow and for next mont we click on the Right Arrow ,these arrows are not displaying but that shows the Cross mark in the place of the arrows.When we click on the Cross Mark that the functionality is working.( I had already checked with the default skin in the personalize settings of WebUI),still the issue is there.
In the development system it's fine but we are getting the problem is in the Quality system.
Regards,
Venkatabharath Voona
Edited by: venkatabharathv on Jun 15, 2011 2:48 PM

answered

Left and right Arrow keys Not working now

My left and right arrow keys are not working properly now.
For example, when typing, left arrow does not produce the desired action (move cursor one spot to the left), and right arrow does not produce the desired action (move cursor one spot to the right). Also, control + left no longer activates spaces, and control + right no longer activates spaces.
Interestingly, in investigating the problem, I noticed that my shortcut keys for activating spaces and for activating expose had been changed (software update?). Before, I had set F5 (without pressing fn) for expose and had set F6 (without pressing fn) for spaces. Now, I noticed spaces was set back to the default of F8 (requiring fn).
The issue persists after shut down, and even when logged on to other users, e.g. Guest.
All other keys seem to be working fine, including the up and down arrows.
It is not hardware because fn + left + right produces the "[" character on the screen.
Any ideas?

You might want to post in the MacBook forums as this seems to be a hardware issue and those gurus hang out there. http://discussions.apple.com/category.jspa?categoryID=248

Right-Clicks are not working when burned to disc.

Hi,
I need to use some right clicks in my course.
They work when I publish the file to my desktop or Server (unchecking 'Enable Accessiblity' and using 'Flash Global Settings'), however when I then burn the files to disc to give to a client, the right clicks do not work.
The course is made in Captivate 5.5 and is published to Flash 9.
Any ideas??
Thanks

Captiv8r wrote:
Hi Hattie
One way past this would be to install a light web server on the disc that would fool the Flash Player into believing it is being served. Check the thread linked below for more.
Click here to view
Cheers... Rick
Hi Rick,
I have treid to do this following the instructions but it still doesn't seem to work...I am worried I may have dowloaded the wrong server2go package as couldn't see one called micro?
Thanks

Left and Right Arrow Keys Not Working

I know this has been asked A LOT, but I can't find a concise answer that works.
Some have had success with fixing something in their System Preferences, then Keyboard Shortcuts. I don't know what this means, went there, and can't add left/right commands as the keys don't do anything. This is probably something easily explained, but I need to be walked through the steps as I don't know how to "add shortcuts" exactly.
I just really need the left and right keys, as I'm a writer and that helps to fix typos quicker.

Current keyboard shortcuts.
Keyboard Shortcuts
Programs that might help you.
Keyboard Shortcuts - BetterTouchTool
Keyboard Shortcuts – KeyRemap4Macbook
Keyboard Shortcuts - Quickkeys

[HW Problem] Some numbers and left and right keys are not working

Numbers one, two, three, four, eight, nine, zero, left, down, and right arrow keys constantly stop and start working. This also happens in the BIOS. I have to remove the keyboard, the hdd, and do a reboot to get them working.
Device:
Dell Inspiron 1121
Intel Core i3 330UM Processor 1.2GHz
2GB DDR3 RAM
250GB HDD
>uname -a
3.12.4-1-ARCH #1 SMP PREEMPT Sun Dec 8 21:18:00 CET 2013 x86_64 GNU/Linux
>df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 19G 8.9G 8.8G 51% /
dev 933M 0 933M 0% /dev
run 935M 748K 935M 1% /run
tmpfs 935M 2.2M 933M 1% /dev/shm
tmpfs 935M 0 935M 0% /sys/fs/cgroup
tmpfs 935M 36K 935M 1% /tmp
/dev/sda4 114G 47G 61G 44% /home
>pacman -Q | grep xf86-input
56xf86-input-evdev 2.8.2-1
xf86-input-joystick 1.6.2-2
xf86-input-keyboard 1.8.0-1
xf86-input-mouse 1.9.0-1
xf86-input-synaptics 1.7.2-1
xf86-input-vmmouse 13.0.0-2
xf86-input-void 1.4.0-5
>lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 Ethernet controller: Qualcomm Atheros AR8132 Fast Ethernet (rev c0)
02:00.0 Network controller: Intel Corporation Centrino Advanced-N + WiMAX 6250 [Kilmer Peak] (rev 5e)
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
Is this a hardware problem?
Last edited by jjshinobi (2014-01-15 02:08:51)

jjshinobi wrote: This also happens in the BIOS.
Then I wouldn't think it's to do with the Arch, updating does not stop parts of the keyboard working for the bios as it's separate firmware. When you can access the bios after first turning on, your PC has not yet accessed the hard drive to load the drivers for the operating system yet. Also as far as I'm aware Arch (or any other operating system in fact) has never updated the bios firmware.
Last edited by Kartious (2013-12-17 14:04:18)

Wired keyboard-number pad&right arrow keys not working-serial # help!

Hello to whomever reads/replies -
I have a wired keyboard for my iMac(it's not the aluminum imac, but the version before it with the keyboard and mouse that came with it). I got this keyboard June 2007 after the original keyboard sent to me had problems with it with some keys not working properly. And now about a week ago my right arrow key and the zero, decimal point, one, two, three and enter button on the keypad stopped working out of the blue. One night they worked and the next they didn't with nothing being done different, nor was the keyboard stored differently.
I've cleaned the keyboard inside and out twice and tried pushing the little squishy thing under the keys when you pop them off and there's no response with those being pushed either so something's got to be wrong with the keyboard itself.
Also, when I go online to look up the warrenty on this keyboard, #1 i can't find where it tells me where the serial number on the **** WIRED keyboard is, just gives me where i can find it on the WIRELESS keyboards. Ugh. So I looked under my keyboard and punched in the numbers and letters that i found on a little silver plate just below where the wire and USB ports are in the top of the keyboard and I get an 'invalid serial number' error message.
So.. could anyone help me with these problems? I'd really rather not call tech support since it took me over two hours to explain to the man that I spoke with last year about my other keyboard and I just don't have the time! Thanks in advance!
Sharon

Hello sharon:
Welcome to Apple discussions.
Run, don't walk to the phone. Call Applecare and indicate you have a warranty problem. The KB is (or will be shortly) out of warranty. It may take you some time, but it may save you some money in the long run.
Incidentally, it appears to me that your KB is, indeed, broken.
Barry

Wired Keyboard: Right Arrow Key Not Working Properly

The right arrow key on my new wired keyboard doesn't work on the first press. After the initial press it works, and if I'm only using the arrow keys themselves it works fine too. But otherwise it takes two presses to move the cursor initially.

I found the problem, at least for my keyboard. Open Keyboard Viewer from the International menu, the one that displays a flag.
Tap the right arrow key lightly. Nothing happens on the viewer. Tap any other key lightly. They display just fine. Now, give the right arrow key a firmer tap. You should see that it registers every time as long as you tap it a little harder than the other keys.
So, at least in my case, it is keyboard specific. That probably explains why some have the problem and other's don't. I will exchange this keyboard for another one until I finally get one that works. Thank God for "Keyboard Viewer" or I never would have nailed this down.
Poor quality control at play here me thinks.
John

My laptop macbook pro has a problem with usb port they are not working.

hi there i have a late 2011 mac pro, its been 2 years of purhase however reary used, now it has a problem with usb port are drawing too much power and usb ports are dissabled from the system. now i can not use usb ports. do yo have solution for it??? cheers

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best.

When I open a link to anew page, I find I have trouble getting back to the first page, so I have to close down and re-opn. The top-left back arrow does not work.

This appears to have happened since I installed Firefox 4 today.

Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
If not, see this: <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

The USB ports on the right side are not working.

HP G71-340US NOTEBOOK

tstevenson08,
It sounds like a hardware issue honestly, as discussed in a previous thread regarding this issue.

Working through David's book - trouble with Control-Left/Right Arrow

I have worked my way through David Nahmani's book in the Apple Pro Training series and it is EXCELLENT! It's the best investment I've made in a long time. The investment I made in the new computer and software would be so much less AWESOME had I not found this little gem. I do have a question, though...
When it comes to the command keys, I can't get the Control-Left/Right Arrow commands to work. They are supposed to be zoom keys - but they just wipe my window left and right. I'm probably doing something wrong. Anyone know what it is?
Thanks in advance for your help.
Gina

Gina,
The problem is that Control + Arrow Keys is the default key command to switch between Spaces (window sets) in Leopard. So, here's what you do:
1. Open System Preferences
2. Click on "Exposé & Spaces" (top row, fourth icon from the left)
3. Click on the "Spaces" tab
4. In the bottom portion of the window you'll see a section for "Keyboard and Mouse Shortcuts", in the second pulldown menu change the setting from "^ Arrow Keys" to another of the choices. I personally use the second choice, which is Command + Option + Arrow Keys.
Now, back in Logic your Control + Arrow Keys should be controlling your Arrange window zoom.
Hope this helps!

Timeline cursor has a Left/Right Arrow with red diagonal line

I am trying to edit a timeline in Premiere, but the cursor changes to a Left/Right arrow with a red line across it. I've never seen this cursor before in CS4 and it is preventing me from moving clips in the timeline.
I tried to take a screen grab to show you all, but the cursor is always hidden in the final grab.
I resorted to drawing the curson in MS Paint.
I feel like such a *******.
I have searched high and low on Google.
Please help
[IMG]http://imgur.com/Nj9ig.png[/IMG]

Hi,
I'm using Adobe Premier and trying to find the key command to move the cursor in the timeline from the beginning of one clip to the beginning of the next clip, and back, or as a way of quickly scrolling through clips one at a time.
In FCP I use the arrow commands.
Can you help me?
Thanks!
JoeyOh2012

Why after i update my left and right arrow keys stop working

my left and right arrow keys stoped working after i updated to Mavericks now the dont work

Hello ccombs2014,
It sounds like 2 of your keys are not working after updating to Mavericks. I found this section of an article for you to help troubleshoot this issue named:
One or more keys on the keyboard do not respond
http://support.apple.com/kb/ts1381
Some keys don't work as expected
From the Apple menu, choose System Preferences.
From the View menu, choose Speech.
Click the Text to Speech tab.
If "Speak selected text when the key is pressed" is enabled, the key or key combination set to speak text cannot be used for other purposes or used to type text--click Set Key and change it to a less-commonly used key combination (try to use modifier keys such as Shift, Command, Option, and Control). Or, disable the "Speak selected text when the key is pressed" option.
Click the Universal Access pane in System Preferences, click the Keyboard tab.
Make sure that Slow Keys is turned off. With Slow Keys on, you need to press a key for a longer period of time for it to be recognized.
In the Universal Access pane, click the Mouse tab, and make sure Mouse Keys is turned off. With Mouse Keys enabled, you cannot use the Numeric Keypad to enter numbers--instead the keypad moves the pointer (cursor). (There is an option to enable Mouse Keys with five presses of the Option key; you may want to turn that option off to avoid accidentally enabling it.) If Mouse Keys is enabled and you are using a keyboard with no numeric keypad or Num Lock function, see Unable to type while Mouse Keys is enabled in Mac OS X.
If the function keys on the top row of the keyboard are not working as expected, see Mac OS X: How to change the behavior of function keys.
If the issue persists, use Keyboard Viewer to help isolate the issue:
Click the Language & Text pane (Mac OS X v10.6) or International pane (Mac OS X v10.5.8 or earlier) in System Preferences.
Click the Input Sources tab (or Input Menu tab in Mac OS X 10.5.8 or earlier).
Click the Keyboard & Character Viewer "On" checkbox to select it (click the Keyboard Viewer "On" checkbox in Mac OS X 10.5.8 or earlier).
From the Input (flag) menu, choose Show Keyboard Viewer.
If the keyboard is connected and detected by Mac OS X, the keys you type will highlight in the Keyboard Viewer window. Open TextEdit (or any text application), and try to type something using the keys that were previously not responding to see if they highlight in Keyboard Viewer.
Start from the Mac OS X Install Disc, choose Terminal from the Utilities menu and test the keys which were previously not working. If the keys work while started from the Install disc, then the keyboard itself is working correctly. Use Mac OS X: How to troubleshoot a software issue to isolate the software issue that may be causing the keys to not respond.
Thank you for using Apple Support Communities.
All the best,
Sterling

Command-Left/Right Arrow not working

Very strange behavior I'm seeing today.
My left/right arrow keys work. Even Option-Left/Right works correctly.
But, Command-Left-Right do not work. No movement at all.
Curiously, Shift-Command-Left/Right work fine.
I've not changed any keyboard shortcuts recently. I've checked the keyboard shortcuts that are currently defined. Nothing that would indicate a problem, but clearly there is.

Just found a solution that worked for me here. Basically, it seems to be a bug with the Dock. If you type "killall Dock" (the command is case-sensitive) into the command line in Terminal, it restarts the Dock. After that the arrows seem to work normally again.

Safari 5.1 hotkeys with left/right arrows are not working!

Similar Messages

Maybe you are looking for