Safari 5.1 under 10.6.8: various issues (responsability, scrolling, etc)

Hi,
here my observations, issues after upgrading to Safari 5.1 (from 5.0.1) under 10.6.8.
Scrolling is often choppy (with two fingers, with scroll wheel). Terribly annoying.
There is – not always, bit quite often – a strange refresh-effect when switching tabs or windows: the switched-to tab/windows goes blank for a very short moment before it comes back with its content (no reload involved, apparently just a display issue), of course terribly annoying.
Text input is lagging (like here, like now).
The beach ball is seen way too often, and way more often than in 5.0.1.
Text selection is lagging. You have to do it veeeeeerrrrry sloooooowly.
I guess, you can sum it up this way: responsability and UI interaction is not right.
This is not the case with regard to page loads, which is snappy, probably even better than in 5.0.1.
Another point: Window switching changed its algorithm back to how it used to be quite some time ago (maybe pre 5.x): The order of the windows does not get re-shuffled, but stays the way it was – so, on the one hand, you have to ‘caroussel’ to all of the windows to get back to the first; on the other hand, you don’t see (as in Safari 5.0.x) one window again and again just because you paused switching for a moment, or closed out some tab. A bit hard to describe, but I guess people will recognize what I mean.
Both algorithms have their pros and cons. I guess I like 5.1’s change back to the ‘traditional’ better, but it’s also a matter of taste, I guess.
RAM usage is pretty hefty as well: “Safari Web Content” 720MB, “Safari” 267MB, Flash Player (Safari Internet plug-in) 25,8MB – I have 2 GB RAM installed.
Text input is horribly lagging. Consider me brave to have finished this posting here.
Please, Webkit/Safari team, fix it.
Best,
Peter

Good news: I can report that you can successfully and easily downgrade from Safari 5.1 to 5.0.5 under 10.6.8 by means of Charlessoft’s excellent (und for a long time well respected [I’m in now way affiliated with Charlessoft]) tool Pacifist (http://www.charlessoft.com/).
Just download this Safari 5.0.5 installer (for Snow Leopard) from Apple’s site (I hope it’s okay to put this link up here; of course Apple prefers you to download only its very latest – alas, the problems with this very latest is why you’re reading this post):
http://appldnld.apple.com.edgesuite.net/content.info.apple.com/Safari5/041-0564. 20110413.Fi9pb/Safari5.0.5SnowLeopard.dmg
Then proceed as described here (look for the part named “Force Install”; don’t get confused that it mentions older Safari versions, like 5.0 and 4.0.5, the procedure is the same now):
http://appletoolbox.com/2010/06/down...-safari-4-0-5/
Also see the concise documentation that comes with Pacifist.
Basically, in all the dialogues coming up just choose “Replace” (not “Update”), a choice clearly marked in Pacifist’s documentation for cases of downgrading. One restart, and you’re back to Safari 5.0.5 without touching any other part of your OS. And, of course, Safari 5.0.5 is supposed to work under 10.6.8, since it gets installed with the 10.6.8 Combo Update, so no surprise.
(Why not just use the above linked 5.0.5 updater, by double-clicking it? This updater denies to install 5.0.5 under 10.6.8, instead claiming to require 10.6.7 – but this seems to be due only to the fact that at the time the Safari 5.0.5 installer was current, 10.6.7 was the up-to-date version of Snow Leopard. And again, I’m writing this post – and, other than the one above which I wrote from within Safari 5.1, without any hiccups – from within Safari 5.0.5, which “flies” compared to my 5.1 experience under the very same, otherwise untouched 10.6.8 installation.)
Just one further caution: After the downgrade, Safari 5.0.5 cannot re-open the last session’s (the one under Safari 5.1) windows and tabs (something to be quite expected); so, in case, bookmark accordingly before initializing the downgrade. (And, of course, you do not loose any other information, like bookmarks, history, passwords, etc. The downgrade does not effect any kind of “brutal” reset of Safari.)
Finally, after the downgrade OS X’s Software Update does offer you the update of Safari 5.1. So, you clearly can get back again to the newest and latest if you wish to.
Best.

Similar Messages

How to get webpage URL with new Safari V6.0 under OS 10.74

Now that the URL space of Safari allows searching by key words, and there's no separate Google search box, this poses a problem.
Let's say one wishes to search for images of "kendall jenner model".   This will bring you to a Google page of multiple individual images. BUT unlike prior versions of Safari, no long URL is formed so one cannot repost the URL in a forum. So now I must use Chrome or browser other than Safari to get the URL of the entire page. Here are the examples of what one is left with in the URL box:
•   Old Safari URL (or Chrome): https://www.google.com/search?q=kendall+jenner+model&hl=en&prmd=imvnsuo&tbm=isch &tbo=u&source=univ&sa=X&ei=1pw3UK63LsmwiQKvxIHoDQ&ved=0CCAQsAQ&biw=1050&bih=639
• New Safari URL: kendall jenner model (which is useless)
QUESTIONS: Using Safari V6.0, how does one get the entire page URL ?    Can the dedicated Google search box at the top be revived so that the proper URL appears in the central top box ?

Just found the cure for Safari 6.0 under 10.74
In Safari preferences, changed the default search engine from Google to Yahoo. Now whenever, for example, a search is made in Google's images, and other websites, the full URL shows in the address line.
Now all websites show the full URL, even through they were derived from search words in the URL field.

Safari 5.1 under Lion. Homepage not displayed when starting

I use safari 5.1 under Lion. In preferences i put a homepage, but when I start Safari it never display this one but always the last url when I closed.

Thanks a lot Barry and Carolyn also.
It is the good solution.
I was searching in Safari preference and it is in system preference .
François

Various Issues After Update To Bootcamp 3.2 (MacBook Pro, WindowsXP)

Hi all,
i'm experiencing various issues after i updated to Bootcamp 3.2.
I first was running Bootcamp 3.0 (everything worked just fine, except some nv4_disp.dll bluescreens). I updated to Bootcamp 3.1 and then to Bootcamp 3.2.
Everything seemed to be fine firstly, but now i noticed various issues:
1. I can't access the Bootcamp control panel (crashes when i try to open it (applecontrolpanel.exe at Offset 0004703a)
2. Everything USB doesn't seem to work (except external USB drives), like USB printer does not print, camera attached via USB does not import photos)
When i check the Driver-Manager i'm seeing multiple USB hubs, root hubs and host conrollers (4 root hubs, 2 openHCD usb host controller, 2 usb hubs...). When i try to configure the USB port the printer is connected to i also get an error ("not supported").
3. When i try the extended display settings i'm getting an "NVIDIA display panel extension can't be displayed".
MacBook Pro 13inch, Windows XP MediaCenter Edition (SP3), NVIDIA GeForce 9400M.
Thanks: Lars

Answered my own question, but want to post how I did it in case other users have the same problem.
I am assuming this issue appeared because I live in Canada. When I installed the Bootcamp 3.2 update, for some reason it changed my regional language of my system to French (Canada) - Canadian Multilingual (Apple)
To change it back I went in Windows XP to Control Panel, Regional and Language Options. Languages tab. Under Text services and input languages clicked Details.
Under settings tab changed Default Input Language from French (Canada) - Canadian Multilingual (Apple) to English (Canada) - US. Click apply.
Wait...it was working, but in the time it took me to type this it suddenly reverted and Im back to weird character mappings inspite of the language setting being changed.

I upgraded my 3rd generation ipad to ios 6.0.1 and now am experiencing various issues. Neither Pages or Numbers will open. I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone.

I upgraded my "new ipad" (the 3rd generation I think) to ios 6.0.1 and now am experiencing various issues.
1- Neither Pages or Numbers will open. I just see a gray screen that says Pages or Numbers at the top and all of my documents are gone. The icon that allows me to create a new document also does not appear. I went to icloud.com to see whether my documents still existed, which brings me to the 2nd problem.
2- It appears that all of my Pages documents are still on icloud, but all of my Numbers documents are gone. There were only about 10, but I access 2 of them nearly every day, so this is a big issue for me.
I went into Settings and all of the icloud information is correct and it "Documents & Data" is on. When I look at the storage, I see the Pages documents but not the Numbers ones. The next thing I did was turn my ipad off and back on, but this didn't fix anything. Since my Pages documents are still on icloud, I then tried to delete the Pages app from the ipad so that I could reinstall it, which resulted in the 3rd problem.
3- I cannot delete any apps. I can get all of the icons to shake and the small x IS available, but everything freezes when I click it. I can't do anything at that point except reset the ipad or wait until it eventually restarts itself. I've tried this with Pages as well as multiple other apps, all with the same result. I've also tried downloading a new app (which worked fine) and then deleting that one, but I got the same result.
3a- A small related issue to this that I am far less concerned about is that when the ipad restarts itself, it comes back on and the screen is really dark and I can barely make out what appears on the screen. If I enter my password right away, it stays that way until I go into Settings - Brightness & Wallpaper and touch the brightness setting (although I'm not actually changing the setting because it already shows that the brightness is turned up a little over halfway). If I don't enter my password right away and let it go completely dark, then click the home button, the brightness is fine.
So now I'm stuck. My guess is that I will need to restore it, but wanted to check before I take that step. Unfortunately, my laptop is on its deathbed so I haven't been synching my ipad to it and I fear my Numbers documents are gone forever. I'd like to try everything I can to fix these issues before doing the restore in hopes that I can get the Numbers documents back.
Any suggestions for any or all of these problems?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

Lumia 900 Various Issues

I recently purchased a white Lumia 900 this past weekend, and just wanted to go over some concerns/issues I've had with it thus far. I was thinking about doing a return/replace with At&t, but it seems that the issues may vary. I'm hoping many of these can be resolved with a software update. Just FYI, I already ran the update that was released on 4/16 and have also reset the phone a few times since then.
Display:
1. The display has a purple hue (most noticeable on gray backgrounds) when set to low brightness. This is mostly an annoynace since my wife has the same phone and hers does not exhibit this behavior. I'm hoping this is not a hardware issue as it displays fine above the low brightness setting. Below is at least one thread of people having the same issue.
http://forum.xda-developers.com/showthread.php?t=1599308
2. Screen response is slow. It seems that that there is a delay between where my finger is and how the screen tracks my movements. I'm hoping that can be adjusted to be similar to how the Lumia 800 responds as per this video. The tracking starts at 3:45.
http://www.youtube.com/watch?v=_KBDZrqVW-8
3. Home screen scrolling is slower than other Windows Phones. On my previous Dell Venue Pro, I could scroll through the home screen much faster. From reading about the web, it seems that the Lumia 900 is set at a much slower pace, or that the inertia scrolling just isn't set. I'm hoping that can either be changed or allow us to change the scroll speed. The combination of the larger screen, the slower screen response, and the slower scrolling just makes the phone feel slower than it should be.
http://forums.wpcentral.com/lumia-900-ace/190309.htm
Sound/Notifications:
1. There is a large volume discrepancy between the speaker and the headphone jack. I try to keep the volume at one setting (around 18) because that is most comfortable for me when listening with headphones, but switching back to the speaker, and it is just clearly too loud at that setting. I'm hoping this can be changed with an update.
http://forum.xda-developers.com/showthread.php?t=1615986
2. Changing the volume while the screen is off is very inconsistent. I have to press the volume rocker buttons several times before it makes the incremental change. It seems others were having issues with the volume rocker not working at all prior to the 4/16 update, so I'm hoping this can be fixed further.
http://forum.xda-developers.com/showthread.php?t=1607937
3. Vibrate function seems to be making a rattling noise. This one definitely seems to be a hardware issue, though what I have seems to be 'normal' for a Lumia 900. It's not as bad as others I've seen on the web, where it would be extremely loud, but it is annoying nonetheless. I'm just hoping a hardware fix can be put in place for the future. It sounds similar to that of the Lumia 900 at the end of this video.
http://www.youtube.com/watch?v=_KBDZrqVW-8
Camera:
1. The camera has issues with white balance and focus. This is definitely a software issue, since 3rd party camera software are able to take great pictures just fine, such as SophieCam. I'm hoping this can be addressed soon.
http://forum.xda-developers.com/showthread.php?t=1605444
Despite these issues, I really do like the phone. I hope many of these issues can be addressed soon via software updates. We broke contract with our previous carrier to obtain these phones, and would really like to keep them, but not at their current state with these various issues. I'm hoping Nokia will see these issues and provide quick and helpful support for them.

OK, so I've calmed down a bit and now realize some detailed explanation of the issue could help to identify it more than ranting. So, here are the usage conditions and symptoms I noticed when I got into this battry drain, laggy, warm phone situation.
1st time:
Where: At work which is outside of Phoenix in a spotty reception area. I had maybe 1-2bars of 4G showing
What: Drove to work using bluetooth audio all the way. When I got to work I was trying to download an App, but the download failed. I tried again, and the download started, then just froze at 15%. I cancelled the download and tried again. It started to download and froze again at 15%. I attributed this to the weak coverage (but since then I've been able to complete a download from the same location with the same service)
Then the battery seemed to drain as fast as I could charge it...literally. I had the phone plugged into a USB charger and the state of charge barely changed after hours of charging. I never thought to re-start. I got home and my battery was basically dead after bluetooth audio all the way home (almost 1 hr). I finally restarted and had no more issues. Didn't really think anything of it...just thought my new phone had a **bleep** battery life
2nd time (following day):
Where: At home with strong LTE coverage in Tempe
What: Woke up, paired up with my portable bluetooth stereo at home. Let the music play while I hung out in the pool for a few hours. I was simultaneously taking pictures throughout the afternoon. Battery charge quickly fell to about 25%. I started to notice that when I would zoom into the pictures I had just taken, it would take about 15sec for the resolution to re-sharpen after zooming in. About 20min later my battery critically low warning came on. So, I plugged into my wall charger. Can't remember at what point I re-started.
That was Saturday. I had no issues and great battery life on Sunday. No bluetooth audio usage. Used Nokia Drive, the phone, internet, and various apps, but no BTA.
3rd time:
Where: Driving from Tempe to work, passing in and out of coverage along the way
What: Streamed Bluetooth audio the entire drive with a few phone calls mixed in. Got to work and the phone was warm, but I assumed this was normal after an hour of usage. Got into work and noticed it being laggy in general. Turned off data and BT Gave it a few minutes to recover and for the phone to cool off with no usage. Phone didn't cool off and remained laggy, so I figured something was up. I re-started, all issues disappeared, and phone cooled off. It has been fine since.

After upgrade on OS and Safari 7.1 I can no longer do 2 finger scrolling. Anyone else find this bug in upgrade?

After upgrade to 10.95 OS and Safari 7.1 I can no longer do 2 finger scrolling. Anyone else find this bug in upgrade? If so, ideas on how to fix it?

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

The iTune cannot detect my iPhone. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.

If I take my apple ID off a computer, but everything is registered under my name, does that affect iWork, office, etc?

If I take my apple ID off a computer, but everything is registered under my name, does that affect iWork, office, etc?

Removing your apple ID won't affect the registered software. But I suspect it will have an effect on any purchases you have made through itunes or the apps store.

X-FI Titanium Pro Various Issues

?Hello Everyone,
I have been having various issues with my new X-FI Titanium pro PCI-E card.
1. With new drivers, I get crackling & popping when ever there is high CPU/HD usage.
2. With the original drivers this goes away, however now I get very loud static after about hour of usage. This is sometimes resolved by switching console modes, but most of the time I have to re-boot.
My System:
Asus M4A79T
AMD Phenom X4 955
Saphire HD4890
8 gigs OCZ pc2800 ram
700 watt OCZ power supply
TB 7200RPM WD HD.
LG DVD RAM dri've.
Creative X-FI Titanium Pro.
I have been through every forum, and all over the internet looking for an answer. Can anyone provide me with some assistance before I scrap my new toy?
thanks in advance.

$ I would highly recommend an X-Fi Titanium, but only the Titanium. The PCI-x rendition of Creative's sound card lineup is easily the best piece of hardware they have ever released. As is fairly common in the PC industry any new piece of hardware can potentially cause a user problems but I'd have to say the Titanium is your best bet.
The problems you're having could possibly just be compatibility issues with your motherboard or a mix of other hardware in your PC. All you can do is try. Personally I am having no problems whatsoever using Creative's latest driver set with Windows 7 x64 and I play quite a few games. If, by chance, you play the game Sacred 2 you could very well have audio issues though but that's due to the game being extremely buggy. Sacred 2 aside everything I throw at my system and X-Fi Titanium Fatality Pro works flawlessly. This is all just my own personal experience though. You can try and hope for the best and if it doesn't work out return the card (purchasing at a local retailer if available for a few bucks more might be worthwhile if you do need to return the product though to avoid shipping costs).

Safari only opens under 1 user,question mark appears over icon in dock...please help,i am clueless

as title says safari opens under wifes user name,it was not in her dock we found it in trash and "put back",then icon appeared on her desk top we put it in her dock,now its in dock and desk top,and other usres cannot open safari,get question mark over icon in dock,we are clueless as u can probably tell any help appreciated

ralphfromronkonkoma wrote:
we found it in trash and "put back",then icon appeared on her desk top we put it in her dock,now its in dock and desk top,and other usres cannot open safari
If you found Safari in the Trash it was probably the Safari.app itself. Icons on the Dock do not go into Trash. They drag off and "Poof".
That means that the app, itself is on your Desktop. Choose it and Get Info (command-i). Does it say, "Safari.app"? Drag it back into /Applications folder. Then drag your icon off the Dock and create a new one by dragging Safari.app to the Dock. It will create an alias which is all the Dock icons are.
The question mark means an alias has lost the path to the application. Have your other users drag it off the Dock and drag it from the applications folder to create a new alias on the Dock.

Safari 3.04 Under Leopard Broken?

I've no idea whats going on here, but ever since my upgrade to Leopard, my Safari has been giving me a very hard time...
First Safari (and Mail) refuses to load any RSS feeds 100% of the time. For the life of me, not a single RSS feed will load for any sites (including RSS feeds on Apple.com)...
Now I've noticed that for some reason I cannot get on http://www.youtube.com
Every time I type the url in it automatically redirects to http://jp.youtube.com
I tried "Reseting Safari" clearing out all cookies and history, but it still does the same thing.
I've tried it hundreds of times but for some reason Safari under Leopard will NOT let me go to the normal page...
Firefox is exhibiting none of the Safari issues I'm having... None of these issues occurred prior to my update to Leopard. Is anybody else having these strange erratic issues with their Safari under Leopard??? Or is something very strange happening on my system???

Scratch the YouTube issue, as I finally figured out I can change my local (clicking the japanese flag in the upper right-hand corner & choosing the option with the globe)...
Its odd that YouTube was defaulting to the Japanese site even after I cleared my cookies out though... Has anybody else's done this???
This still doesn't tell me why I seem to be having my RSS issues though... At this point I may just format and do a clean install... :/

How do I do a clean re-install of Safari 5.1 under Lion

I am seeing a number of anomalies in Safari 5.1 behavior/performance under Lion (10.7.1). This instance of Safari has "inherited" something via Migration Assistant that it should not have. One of the most obvious of these anamolies is that certain web sites do not display properly. Example: http://www.padilicious.com/ looks like this:
No Style Sheets are selected in Preferences > Advanced.
If I create a new user account, Safari in that instance renders this website properly. Thus, Internet Plug-in are not the source of this issue.
I have removed all extensions and reset everything in Safari. I have even deleted Safari preference files to no avail. What I think I need to do is to completely uninstall Safari and all of its related files and then reinstall it. Is this possible and, if so, how do I do that?

Here you go:
Last login: Sat Sep 17 12:10:51 on console
localhost:~ flowney$ kextstat -kl | awk ' !/apple/ { print $6 $7 } '
at.obdev.nke.LittleSnitch(2.4.2)
com.AmbrosiaSW.AudioSupport(4.0)
com.hzsystems.driver.CDSDAudioCaptureSupport(1.5)
com.pleasantsoftware.driver.showMacsterDriver(1.1.0d1)
com.Cycling74.driver.Soundflower(1.5.2)
com.kensington.trackballworks.driver(1.0.0)
com.vara.driver.VaraAudio(1.0.1)
localhost:~ flowney$
localhost:~ flowney$ sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
Password:
com.qdea.syncproxhelper
com.google.keystone.daemon
com.flyingmac.farsuite.daemon
com.flipvideo.FlipShareServer.launchd
com.bombich.ccc
com.barebones.bbedit
at.obdev.littlesnitchd
localhost:~ flowney$
localhost:~ flowney$ launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
com.wacom.wacomtablet
com.hp.help.tocgenerator
com.google.keystone.root.agent
com.flyingmac.farsuite
com.flipvideo.FlipShareAutoRun
at.obdev.LittleSnitchUIAgent
at.obdev.LittleSnitchNetworkMonitor
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae
com.valvesoftware.steam.ipctool
localhost:~ flowney$
localhost:~ flowney$ ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
/Library/Components:
iGlasses3.component
/Library/Extensions:
/Library/Frameworks:
.dat0133.000
.dat014f.000
AEProfiling.framework
AERegistration.framework
Adobe AIR.framework
AudioMixEngine.framework
EWSMac-GC.framework
EWSMac.framework
FxPlug.framework
HPSmartPrint.framework
Jackmp.framework
Jackservermp.framework
MacFUSE.framework
NyxAudioAnalysis.framework
Panda.framework
PluginManager.framework
PrintMeSSL.framework
ProFX.framework
ProMetadataSupport.framework
R.framework
StuffIt.framework
StuffItCore.framework
TSLicense.framework
cisco-vpnclient.framework
iLifeFaceRecognition.framework
iLifeKit.framework
iLifePageLayout.framework
iLifeSQLAccess.framework
iLifeSlideshow.framework
/Library/Input Methods:
/Library/InputManagers:
Menu Extra Enabler
ProfcastGaragebandPlugin
/Library/Internet Plug-Ins:
.DS_Store
ClickToFlash.webplugin
Disabled Plug-Ins
Flash Player.plugin
Flip4Mac WMV Plugin.plugin
Flip4Mac WMV Plugin.webplugin
GarminGpsControl.plugin
Google Earth Web Plug-in.plugin
JavaAppletPlugin.plugin
OfficeLiveBrowserPlugin.plugin
PangeaVR.bundle
Quartz Composer.webplugin
QuickTime Plugin.plugin
Silverlight.plugin
WebKitCIPlugIn.plugin
flashplayer.xpt
huludesktop.webplugin
iPhotoPhotocast.plugin
nsIQTScriptablePlugin.xpt
/Library/Internet Plug-Ins (disabled):
.DS_Store
AdobePDFViewer.plugin
/Library/LaunchAgents:
at.obdev.LittleSnitchNetworkMonitor.plist
at.obdev.LittleSnitchUIAgent.plist
com.adobe.AAM.Updater-1.0.plist
com.flipvideo.FlipShare.AutoRun.plist
com.flyingmac.farsuite.plist
com.google.keystone.agent.plist
com.hp.help.tocgenerator.plist
com.wacom.wacomtablet.plist
/Library/LaunchDaemons:
at.obdev.littlesnitchd.plist
com.apple.pcastweb.plist
com.apple.remotepairtool.plist
com.barebones.bbedit.plist
com.bombich.ccc.plist
com.flipvideo.FlipShareServer.launchd.plist
com.flyingmac.farsuite.daemon.plist
com.google.keystone.daemon.plist
com.qdea.syncproxhelper.plist
/Library/PreferencePanes:
Flash Player.prefPane
Flip4Mac WMV.prefPane
Growl.prefPane
MacFUSE.prefPane
Perian.prefPane
PinPoint.prefPane
TrackballWorks.prefPane
WacomTablet.prefPane
/Library/PrivilegedHelperTools:
com.barebones.bbedit
com.bombich.ccc
com.qdea.syncproxhelper
/Library/QuickLook:
.DS_Store
BetterZipQL.qlgenerator
DICOMQuickLook.qlgenerator
GBQLGenerator.qlgenerator
StuffIt.qlgenerator
iWork.qlgenerator
/Library/QuickTime:
.DS_Store
AC3MovieImport.component
AppleIntermediateCodec.component
AppleMPEG2Codec.component
CamTwist.component
ClosedCaptionImporter.component
DesktopVideoOut.component
FCP Uncompressed 422.component
Flip4Mac WMV Advanced.component
Flip4Mac WMV Export.component
Flip4Mac WMV Import.component
LiveType.component
Perian.component
QTMpeg4Codec.component
x264Encoder.component
/Library/ScriptingAdditions:
Adobe Unit Types
Numerics.osax
SIMBL.osax
Satimage.osax
XMLLib.osax
/Library/Services:
SymbolicLinker.service
WordService.service
/Library/StartupItems:
HP IO
HP Trap Monitor
Library/Address Book Plug-Ins:
.DS_Store
SkypeABDialer.bundle
SkypeABSMS.bundle
Library/Frameworks:
EWSMac-GC.framework
EWSMac.framework
Library/Input Methods:
.localized
Library/Internet Plug-Ins:
.DS_Store
ClickToFlash.webplugin
EvernoteSafariClipperPlugin.webplugin
Move-Media-Player.plugin
WebEx.plugin
Library/LaunchAgents:
.DS_Store
com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
com.apple.MobileMeSyncClientAgent.plist
com.apple.SafariBookmarksSyncer.plist
com.valvesoftware.steam.ipctool.plist
com.zeobit.MacKeeper.Helper
Library/PreferencePanes:
.DS_Store
teleport.prefPane
Library/ScriptingAdditions:
ChaxAddition.osax
Library/Services:
.DS_Store
Audio • Encode to iTunes Format.workflow
Auto Add to iTunes.workflow
Copy File Path.workflow
Create Digital Book from the Selected Files.workflow
Create Digital Book from the Selected Text.workflow
Create Multi-column Article Web App for iPad.workflow
Create Single-Page Web-App with Clipboard Text.workflow
Create Single-Page Web-App with Selected Text.workflow
Create Symlink.workflow
Create and Sync Digital Book.workflow
Create iPad Web App with Selected Photos.workflow
Create iPad Web App with Selected Versions.workflow
Folder • Copy to MobileMe Sites Folder.workflow
GraphicConverter.service
Images • Create iPad Photo Web App.workflow
Move Selected Finder Items to New Folder.workflow
Movie • Apply Color Profile.workflow
Movie • Encode Media.workflow
Movie • Play Selection in Sequence.workflow
Movie • Show Info.workflow
New eMail.workflow
OmniOutliner Professional.service
ToastIt.service
ePub test folder
localhost:~ flowney$

How can I get Safari 5.1 under 10.6.8 to display pdf documents - now all I get is a black window?

Every time a site presents pdf documents and I select one - all I get is a black window.

Lorne...
Read here ...
Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Known Issues | Adobe products on Mac OS 10.7 Lion

Merge two full-screened safari windows' bug under lion

Hi there,
After installed lion, i found an obviously bug in safari.
1. Open safari, enter full-screen mode.
2. Creat a new safari window (not a new tab), then it will moved into a other full-screen automaticlly.
3. Click in menu bar : window>merge all windows.
4. And here you go, two widows will be merged into one full-screen without the 'quit full-screen mode' buttom, and the other full-screen 'desktop' will be blank with only background. And the mission control died also XD

exactly, see~

Safari 5.1 under 10.6.8: various issues (responsability, scrolling, etc)

Similar Messages

Maybe you are looking for