Safari 5 stops my internet completely!

I tried installing Safari 5 to get HTML5, which IE8 doesn't have, but when I install it it just stops every application's internet connection, messenger disconnects, antivirus can't update, and internet browsers (including safari)can't load anything! and it doesn't stop at my computer, but it happens to every computer using the same wireless network. It says that the web page cannot be found or I'm disconnected, but I'm connected, I try disconnecting and connecting again, but it's useless. The only thing that seems to work fine even with that is Pokerstars.net, but the only way I can use the internet is uninstalling safari, reboot my computer, and reboot the internet router. I need help because I need HTML5, and I don't like Firefox, and Chrome is too rough, and IE9 is, for now, only for Vista and 7, so Safari is the only choise left, but I can't use it.

I try disconnecting and connecting again, but it's useless. The only thing that seems to work fine even with that is Pokerstars.net,
Peculiar. That sounds like some kind of browser hijack that only gets activated when a particular Safari version is installed, although I don't know of one in particular that does that.
Still, I think it's best we try to get the malware possibilities off the table first.
Download and install the free version of Malwarebytes Anti-Malware. Update your definitions and then run a full scan of the PC. (Takes about 2 hours on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please past the contents of the log for the scan into a reply here.

Similar Messages

Safari 5 stops loading, internet connetion is bad for a few minutes

hi,
i'm new to the forum, but I have spent a lot of time here and have found some great answers but this time i can't find a solution.
i have installed safari 5.0 on my 15" MBP (running 10.6.3) and now working is impossible: pages don't load completely and if they do, it takes about 2-3 minutes. when i stop the loading process, it's impossible to use the internet for a few minutes.
as far as i know, most problems are caused by extentions, but i don't have installed any. using other browsers on this computer doesn't work very well too.
on my 17" iMac (late 2006) which is still running 10.4 and safari 4, everything is smooth and fast.
do you know what the problem could be and how i could go back to safari 4 (haven't got time machine running and the deinstallation didn't work).
thanks a lot for your help!

Hi and Welcome to Apple Discussions...
using other browsers on this computer doesn't work very well too.
For Safari...
Go here for trouble shooting 3rd party plugins or input managers which might be causing the problem. Safari: Add-ons may cause Safari to unexpectedly quit or have performance issues
If Safari third party plugins or input managers aren't the issue, From the Safari Menu Bar, click Safari / Reset Safari. Select the top 7 buttons and click Reset the relaunch Safari.
If you didn't repair disk permissions after updating to Safari 5, it would be beneficial to do that.
Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
Carolyn

In Safari, why doesn't Internet Plug-in, stop plug-in to save power work anymore?

In Safari, why doesn't Internet Plug-in, stop plug-in to save power work anymore?

Yes, the Mozilla Plugin Check page is specifically for Firefox.

Every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

every time I try to use internet, the application(firefox/safari/chrome) stop working but when I use the modem on windows it works great. whats the problem?

I just spoke with Tesco technical support (having been transferred to them by Clubcard support), who told me that the problems people are experiencing when visiting the Tesco site via Safari aren't currently being addressed because "not enough people have called to complain about it".
I asked what percentage of people he thought might make the effort to call instead of just giving up. He replied that he would be one of those who just gave up.
So it would seem that if we would like the problem to be resolved, we each need to take a few moments to CALL TESCO and ensure our complaint is logged by the technical support team.
Every voice helps

Safari randomly stops opening pages

Hi Everyone,
Since upgrading to Yosemite, Safari randomly stops opening pages. It works for a while, then if I put my computer to sleep, sometimes when I wake my computer, Safari will no longer opens pages. When this happens, all apps requiring internet are affected including Firefox and Chrome which no longer work, as well as mail and iMessage.
They only way to get it to work again is to reboot my computer - sometimes I need to do this several times.
I have deleted Safari preferences to no avail.
Can anyone suggest a solution?
Thanks
TB

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i 'kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Safari cannot find the internet plug in

I have a new Intel iMac that initially had no problem surfing any web site. I now have a problem with any page that contains "shockwave". As and example when I try to got to www.autotoll.com.hk I get stopped by the following message...
++Safari cannot find the internet plug in++
++The page “Autotoll” has content of MIME type “application/x-shockwave-flash”, but you don’t have a plug-in installed for this MIME type. A plug-in should be available on this page:++
++http://www.macromedia.com/go/getflashplayer++
++Do you want to open the page?++
I have gone to macromedia numerous times and tried to download and install Flash Player 9. I still get the same message.
I have also tried using FIREFOX and get the same message.
How do I install Flash Player 9 properly??????
HELP!!!

Re: FLASH 9 won't work with Safari 2.0.4 or Firefox (A FIX!!!)
Posted: Aug 24, 2007 4:44 AM in response to: threejay10
threejay10,
thanks for pointing me to the other discussion thread on
http://www.justin-cook.com/wp/2007/03/08/flash-9-doesnt-work-on-mac-os-x/
i am not that comfortable in Terminal so I opted for the one other option i could see that doesn't reliance on me typing a slew of sensitive characters into Terminal.
So, instead, I downloaded Pseudo from VersionTracker
http://versiontracker.com/dyn/moreinfo/macosx/9608
installed it in my applications folder. then dragged the Flash 9 installer onto Pseudo. Flash then installed perfectly and all is working well.
It seems there is a simple fix after all. Apparently Pseudo installs into the root and therefore, I assume, bypasses the permissions issues. After 2 days of trying to solve this, I"m happy it's over. Thanks again for pointing me in the right direction. I hope others can find this thread and the solution.
Cheers, TM

HT4550 The pdf engine in Safari has stopped working. I can no longer view pdf files in Safari. I get a black screen pdf files in Safari. Any ideas why?

The pdf engine in Safari has stopped working. I can no longer view pdf files in Safari. I simply get a black window when pdf files are downloaded

Hi..
Go to /Library/Internet Plug-Ins
Move the AdobePDF browser plugin to the Trash.
Try Safari.
If you have problems locating the plugin...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
/Library/Internet Plug-Ins
Click Go

Safari has stopped working! HELP!

Ok so I have been using safari for over a year now on my windows 7 hp pc. Recently however safari has "stopped working". When i open safari i get an error message stating "safari has stopped working" and then under that is a green loading bar stating "windows is checking for a solution." When i wait for a solution nothing happens and safari just shuts down. Ive tried uninstalling it and then reinstalling it but the same problem occurs. Ive even tried going into "uninstall a program" and repairing both safari and apple support center.....still no luck. Please help im using internet explorer right now and i hate is so much...i miss safari

Recently however safari has "stopped working". When i open safari i get an error message stating "safari has stopped working" and then under that is a green loading bar stating "windows is checking for a solution."
Fingers crossed, your Windows 7 will have been recording some additional information about those.
First, open your Action Center and expand "Maintenance". Click "View reliability history":
Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
You should see something that looks like the following screenshot:
Copy and paste the contents of the problem report into a reply here. For example:
Description
Faulting Application Path:          C:\Program Files (x86)\Safari\Safari.exe
Problem signature
Problem Event Name:          BEX
Application Name:          Safari.exe
Application Version:          5.34.55.3
Application Timestamp:          4f6ba239
Fault Module Name:          StackHash_7100
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          7d3a1240
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          2057
Additional Information 1:          7100
Additional Information 2:          710027e7a8d30022e5e0ee529f40121f
Additional Information 3:          5158
Additional Information 4:          5158ee4164428f7b514a5e7ee9654f7c
Extra information about the problem
Bucket ID:          2871481836

Ever since I downloaded Yosemite Safari has stopped working

Ever since I downloaded Yosemite Safari has stopped working

Dear Dr Mommy,
Please help us help you. MacBook Pros have been in continuous production since 2006 in dozens of variants. Which do you have? The oldest models that "officially" support Yosemite do not always run it well because their hardware falls into the "just barely" category.
Is this the slow computer you asked about last April 8 (15-inch Mid 2009; 4GB RAM)? If so, did you follow the suggestions in that thread about removing MacKeeper and some of the other third-party performance killers that showed up?
Do any of the following apply:
1) Are you running any anti-virus/internet security applications?
2) Are you running any "cleaning/tune-up/optimizations" applications?
3) Any peer-to-peer or torrent downloading software?
4) Any third-party disk backup software that came bundled with an external hard drive?
5) Any online backup scheme other than iCloud (Carbonite; GoogleDrive; MS One Drive)?

Safari 5.1.5 on PC. Windows 7 64 bit. My favorite browser is not working. Please help. I keep getting a window in the middle of a page saying ''Safari has stopped working'''''

Hello.
My favorite browser Safari (5.1.5 ) has stopped working. Yes I know is on a PC. But is been very good to me for a long time, untill about two months ago. I keep getting a pop up message saying "Safari has stopped working" I will close the pop up message and continue working but within a few minute, the message will pop up again. The browser opens up fast as always and runs fine but the message is a pain and annoying. I'm running Firefox now , but I want my Safari back . Please help.
Jonasfromdc

Thanks. b noir. For the quick reply post.
b noir wrote:
Fingers crossed, your Windows 7 will have been recording some additional information about those.
First, open your Action Center and expand "Maintenance". Click "View reliability history":
Once the reliability report has been generated, look for Critical events for Safari generated at the time of the "Safari has stopped working" messages. Doubleclick the name Safari in the critical events. (Don't click View solution.) Here's a screenshot showing what to doubleclick:
You should see something that looks like the following screenshot:
Copy and paste the contents of the problem report into a reply here. For example:
Description
Faulting Application Path:          C:\Program Files (x86)\Safari\Safari.exe
Problem signature
Problem Event Name:          BEX
Application Name:          Safari.exe
Application Version:          5.34.55.3
Application Timestamp:          4f6ba239
Fault Module Name:          StackHash_7100
Fault Module Version:          0.0.0.0
Fault Module Timestamp:          00000000
Exception Offset:          7d3a1240
Exception Code:          c0000005
Exception Data:          00000008
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          2057
Additional Information 1:          7100
Additional Information 2:          710027e7a8d30022e5e0ee529f40121f
Additional Information 3:          5158
Additional Information 4:          5158ee4164428f7b514a5e7ee9654f7c
Extra information about the problem
Bucket ID:          2871481836
I generated the problem report similar to the above screen shot " by way of IE 9 " but will not let me copy and paste the contents as a screen shot in reply to your post here . Copy to clipboard did not work either. I might be doing something wrong. Oh well.
By the way , the only difference is- The Problem Event Name of mine is not BEX. but rather : APPCRASH. Fault Module Name : JavaScriptCore.dll. Fault Module Version: 7534.55.2.1. The rest are very similar to the above screenshot. If you need more information then I guess I have to do it all manually. Please let me know. Thanks again.
Jonasfromdc.

When i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

when i click on safari to use the internet it says "safari cannot open the page because it is not connected to the internet", but i am connected to a wifi network so how do i get safari to work?

you may be connected to the wireless network but the question is the internet working properly on the wireless network...
what i mean is that i can make a wireless network without the internet so i can save and share files and have other devices connected to the same network access them... but you have to make sure that your internet it running properly... may have to reconfigure the router is your using PPPOE or if it was working prior to your post then try to restart your modem... that usually resolves most issues.

How to disable access to internet completely in the jnlp file

Hi All,
Can someone help me in figuring out how to disable access to internet completely in the jnlp file.
To be specific with the scenario if the client does not have the JRE installed, i would like to have it downloaded from the server where application runs instead of going to java.sun.com website which needs internet access.
How can we configure it in such a way that it does not go to internet at all.
Here is the snapshot of my jnlp file
<j2se version="1.5.0+" href="http://java.sun.com/products/autodl/j2se" initial-heap-size="128m" max-heap-size="128m"/>
I tried with the following and still unsuccessful.
<j2se version="1.5.0+" initial-heap-size="128m" max-heap-size="128m"/>
Could not find any useful information in the documentation.

see post from Mike at:
http://forum.java.sun.com/thread.jspa?threadID=704112&messageID=4082098#4082098
for how to set up your own autodownload of jre from within your internet.
/Andy

Windows 7 64-bit: Safari has stopped working

Help needed! I am one of those guys that has to use a Windows machine at Work. So I have a Windows 7 64-bit OS on my work laptop. I use Safari at home on my Macs. Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working." I have uninstalled Safari, manually cleaned up all the Safari folders that go into user account preferences, ran a registry cleaner via WinUtilities so that all traces of Safari are gone. Then did a fresh install with Administrator privileges (I even tried the install with my own login ID) but either way the result is the same -- Safari 5 crashes at random. What can I do to make Safari 5 on Windows 7 stable? Please advice.
Thank you!
TS

Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working."
Fingers crossed, the problem reports for those errors might cast some fresh light on the source of the problem.
Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent ... the Action Center?) and look for recent Safari problem reports. Open them up and look through. Do they all seem to be saying the same thing? If so, paste the contents of a typical problem report into a reply here so we can have a look.

Any program other than safari won't detect internet

any program other than safari won't detect internet eg. itunes, skype etc. I can't even system update.
Safari has no problems and I can use the internet fine.
Someone told me to check proxy settings and make sure "Use Passive FTP Mode" was ticked which it is...
Does anyone have any suggestions? I urgently need to fix this and I can't get an appointment to see anyone until next week.
Thanks!

Thanks Kaan for your reply,
Yes, Network does indicate that Airport is connected to the internet. Internet Explorer (OS X) connects instantly over the same network. Restarting Safari doesn't work. Waiting a few minutes doesn't work. Choosing a different web site to access doesn't work. Safari (1.3.1) has worked beautifully for months over this same network.
Thanks again and Happy New Year.
BJZTX
G4 Quicksilver Mac OS X (10.3.9) G4 Notebook 10.3.9

How to Get Safari to STOP asking for Password

Whenever I start up Safari for the first time, it annoyingly asks for a password, and I've dismissed this prompt without typing in any passwords, and I've been able to continue doing what I'm doing. But how do I get Safari to stop asking for a password? I've read similar posts but nothing has been asked in exactly this way, as far as I can tell. What I've done:
- Gone into Keychain Access and deleted the only Safari-related item I find there, called "Safari Forms Autofill." This works temporarily but the password prompt comes back again, and this item appears again in Keychain Access.
- Gone into Safari Prefs Autofill and made sure Passwords was unchecked; it was.
Any ideas?

Aha, I've answered my own question: You have to uncheck the "Other Forms" option in Safari Auto-Fill Prefs as well. Ho ho ho all.

Safari 5 stops my internet completely!

Similar Messages

Maybe you are looking for