Safari 6.0.4 does not open any pages (but Firefox works)

A couple of days later after the update to 6.0.4, Safari is unable to load any pages.
I have disabled all extensions and run OnyX over it, but without any success.
All options in Proxies in the network preferences are deselected.
Firefox and other applications can use the LAN-Internet-Connection without any issues.
Does it have something to do with another problem, because I can not open the Java Control Panel (it always crashes)
I have a Mac Pro 3.1 running with 10.8.3
Can somebody please help?
Many thanks
Regards
Nils

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

Safari 8.0.2 does not play any sound (but sound works in other apps).

Safari 8.0.2 does not play any sound (but sound works in other apps).

Hi Michaelgst,
Welcome to the Apple Support Communities!
I understand that you do not hear sound from Safari on your computer but you do hear sound in other applications. There may be several troubleshooting steps I would suggest to troubleshoot this situation.
The first troubleshooting steps I would recommend would be removing any unsupported third-party add-ons. Please use the information and instructions located in the attached article to complete this process.
Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues - Apple Support
Best regards,
Joe

Firefox will not open any page but I have no trouble with the pages opening with explorer

unable to connect to any page through firefox but can open all with internet explorer, why can't firefox open them. It can not be my connection or my network because I can still open with explorer and nothing has changed with my computer. Please help I really like to use firefox

Try to repair the disk permissions: http://thexlab.com/faqs/repairprocess.html
See also http://support.apple.com/kb/HT2963 Troubleshooting permissions issues in Mac OS X

Powerpoint does not open any presentation

Problems with powerpoint presentations.
It does not open any presentation, but I can use the presentation with previsualisation program, so in the presentations there are any error, it looks like the program doesn´t respond.
Thanks for your answers. I really need to use it...so... thanks

Support for Microsoft PowerPoint

When I try to open Illustrator it opens Adobe Application Manager, but it does not open any window, why does this happens?

Hi I am trying to open Illustator CC 2014 but it only opens Adobe Application Manager but it does not open any window. It's on a mac. Please help!!

Hi Henry,
Can you please also confirm the Mac OSX version?
Regards,
Sumit Singh

Iphone 4 does not open any application it happened when i updated my iphone4 in my mac book pro

iphone 4 does not open any application it happened when i updated my iphone4 in my mac book pro

Install a free app. Click App Store app, find any free app you might like, install the app. If still problems, try a Reset, hold both Home and Power buttons until the iPhone restarts.

Motion 5 program does not open any more

It is only the second time that I am using program Motion 5 and I only see the first small screen : does not open any more.
Is there anubody who can help me ?

When you say first small screen I assume you are referring to the splash screen. If so you need to double click on a template or new project icon. You can also choose from the list of projects/templates on the left listing or choose a preset on the right. Just double click on what you want or select and choose open at the bottom of the window. Motion will then open for you.

Error msg after scan "ADF does not contain any pages"

HP office jet 6600 has worked well for months, but recently 3 out of 5 times that I tried to scan from the ADF, whether one page or many, the scanner runs through its cycle and then gives me the following error: “The scanner automatic document feeder (ADF) does not contain any pages. Insert the pages to be scanned into the ADF and try again.”
Sometimes I just run it again and it works. I'm using HP scan that came with the 6600 download full driver package; running Windows 7 64-bit. I use the scanner significantly and it has operated perfectly for over a year and I haven't changed anything that I know of.Appreciate any help that somebody can give me… I have cleaned rulers and "flicked the little white thing", and some of the other things that were mentioned for similar problems.

Hello I would be happy to help you with the automatic document feeder (ADF) issue you are having with the Officejet 6600. Even though it's a different issue this document has several steps you can try; Vertical Bands, Lines, or Streaks in Copies, Faxes, or Scans. I've copied the applicable steps here for you. Clean the scanner glass and scanner lid If the scanner glass or the white underside of the lid has fingerprints, smudges, lint, dust, or other debris, this can slow performance and affect copy and scan quality. To resolve this issue, clean the product.Before you begin, gather the following materials:Several clean, soft, lint-free clothsMild glass cleaner
CAUTION:Use only glass cleaner to clean the scanner glass. Do not use cleaners that contain abrasives, acetone, benzene, or carbon tetrachloride. These substances can damage the product. Avoid isopropyl alcohol (rubbing alcohol) because it can leave streaks on the glass.Press the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the scanner lid.
Figure : Lift the scanner lid
Spray a clean, soft, lint-free cloth with mild glass cleaner.
CAUTION:To protect the scanner, do not spray the glass cleaner directly on the glass.Clean the scanner glass, and the glass strip next to the scanner glass, with the lint-free cloth.
Figure : Clean the scanner glass and the glass strip
Clean the white underside of the scanner lid.
Figure : The underside of the scanner lid
Dry the scanner glass and the glass strip thoroughly with a clean, dry cloth or chamois to prevent spotting, and then dry the white underside of the scanner lid.
NOTE:Do not use paper-based wipes or tissues that can leave fiber residue.Close the scanner lid.Reconnect the power cord to the rear of the product.If the product does not turn on by itself, press the Power button () to turn it on.Try to copy, fax, or scan again.If these steps resolved the issue, you do not need to continue troubleshooting.If the issue persists, continue to the next solution.
Clean the automatic document feeder (ADF)
Follow these steps to clean the automatic document feeder (ADF), and then make blank copies to check if the issue is resolved.Step one: Clean the ADF rollers and separator padFollow these steps to clean the automatic document feeder (ADF).Gather the following materials:A clean, lint-free cloth, or any cloth that will not come apart or leave fibersDistilled, filtered, or bottled water (tap water might damage the product)Remove any originals from the document feeder tray.
Figure : Remove any originalsPress the Power button () to turn off the product.Disconnect the power cord from the rear of the product.Lift the cover of the ADF until it stops.
Figure : Lift the ADF cover
Locate the pick rollers and the separator pad.
Figure : Locations of the pick rollers and the separator pad
The ADF coverThe pick rollersThe separator padLightly dampen a clean lint-free cloth with distilled or bottled water, and then squeeze any excess liquid from the cloth.Use the damp cloth to wipe any residue off of the separator pad.
Figure : The separator pad
Use the damp cloth to wipe any residue off of the pick rollers.
Figure :
Dry the rollers and the separator pad with a clean, dry, lint-free cloth.Do not close the ADF cover. Continue to the next step to clean the glass strip in the automatic document feeder.
Clean the glass strip in the automatic document feeder
Follow these steps to clean the glass strip underneath the mechanism in the automatic document feeder (ADF).
NOTE:The images in this step might not be of your product, but the steps are the same.If you have not done so already, disconnect the power cord from the rear of the product.Remove any originals from the document feeder tray.
Figure : Remove any originals
Open the ADF cover, and then lift the ADF mechanism.
Figure : Lift the ADF mechanism
Lightly dampen a clean, soft, lint-free cloth with a mild glass cleaner.Gently clean the glass strip inside the ADF, and then thoroughly dry it to prevent spotting.
Figure : Clean the glass strip
Lower the ADF mechanism back into place, and then close the ADF cover.Step three: Make a blank copy using the scannerFollow these steps to make a blank copy using the scanner.Lift the scanner lid.Figure : Lift the scanner lidRemove any originals from the scanner glass.Close the scanner lid.Load unused, plain white paper into the input tray.From the home screen on the product control panel, touch Copy ().Touch Start Black to start the copy.If the copy is clean, continue to the next step to make a copy using the ADF.If the copy has vertical bands, lines, or streaks, there might be dust inside the product, poor internal connections, or the product might be damaged. Please let me know if these steps resolved your issue, or if there is anything else I can do to help. I look forward to hearing from you! Thanks,

Acrobat XI does not open - licensed copy - has been working properly for several months

acrobat XI does not open - licensed copy - has been working properly for several months. i never did have any problems before this. was acrobat 10 with acrobat XI upgrade in November 2013 so 6-7 months of trouble free use

I too have the same problem working property until about January or February this year...get "bad parameter' message trying to open files and then when I did the upgrade this a.m. it will not open at all, just spins and then disappears. I had this problem about a week ago and our IT man thought he had it resolved, even then kept getting 'bad parameter' and then this a.m. right back to not opening at all. I have Windows 7 Professional v6.1 and am wondering if it's a compatibility issue? Will I continue to have these issued until I install Windows 8?

WebKit2WebProcess.exe quits several times and does not open web page.

Steps to Reproduce:
1. Setup latest Safari on Windows XP (Safari 5.1.7 for Windows).
2. Visit to http://www.navyfield.com.
Actual Result:
Safari does not open web page. WebKit2WebProcess.exe quits several times while open web page. drwtsn32 reports a log (can attach log).

Safari for Windows is unsupported and obsolete, and should not be used.

Firefox will not open ANY site. Wont work AT ALL. Nothing seems to be working.

Firefox will not open ANY site. It worked last night, but not today. I uninstalled it many times, didn't worked. It displays the screen that says "unable to connect" yet chrome and explorer both work. I have disconnected and reconnected a few times, restarted my laptop, neither of those worked either. I have also tried turning "safe mode" off after re installing firefox, but again, that did not work. I need help :(.
Although, before this, firefox was not letting me use voice recording sites or any site that let me watch television online. It would load the commercials, but not play the episode. It wouldn't even let me upload pictures to photobucket. However, it worked using chrome or explorer.

Looks like a bunch of people have this problem. Anyone got any ideas to fix this???

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or apllications

My iPhone 3gs is not able to connect through internet. I have a Airtel wireless at home.Phone connects through wireless but not opens any page or itune or applications.

Hi,
can you provide a bit more detail, as can you use the 3G network to access the web, and what security is your wireless using?
Regards
Ryan

MacBook Air can not open any pages in internet.

Hello, my new MacBook Air (just bought it) can not open any pages in internet. In >System preferences > Network it says that Wi-Fi has the self-assigned IP address and will not be able to connect to the Internet But Skype is working very OK on it at the same time... HELP... Also my old MacBook is working OK.

Be patient and wait for someone to reply. This is a user to user forum, we are all volunteers. Another thing you can do is contact AppleCare or bring your machine into an Apple Store or AASP. Perhaps they will have some suggestions.

Safari 6 on ML does not open or even let me save PDF flies

I don't know if anyone has come up with this problem, but ever since I upgraded to Mountain Lion, I can't open PDF files or save them to downloads folder or on my hard drive. Every time I click on a pdf link, Safari opens a new tab with the full address ending in .pdf in the address line, but empty page. It does not give any opttions to save the pdf either. So every time I need to download or read a PDF document on internet, I have to launch Opera. I don't want to change my default browser from Safari to Opera, but if this pdf issue can't be sorted out, i will have to migrate to Opera. Has anyone had this problem before?
There was no problems with PDFs in Safari with Lion or Snow Leopard (though I don't remember if I was using Safari 6 with them).
I am running a mid 2012 MBP, ML 10.8.0, Safari 6.0, default PDF viewer: Preview

Back up all data.
Quit Safari. In the Finder, select Go ▹ Go to Folder... from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then launch Safari and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

Safari not opening any pages

My MAC Book Air is running OS X Yosemite 10.10.1 and when updated to Safari to 8.0.2, Safari can not open any web pages.
My MAC Book Pro 15 inch works fine.
Does any one have the same problem?

Restart the computer and try again.
As a shortcut, launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select All Processes from the View menu, if not already selected.
Enter "discoveryd" in the search box. You should see a process with that name in the list on the right. Select it, then click the stop-sign icon in the top left corner of the window. In the sheet that drops down, click Force Quit. Enter your administrator login password when prompted.
The process should relaunch immediately. Test.

Safari 6.0.4 does not open any pages (but Firefox works)

Similar Messages

Maybe you are looking for