Safari 6.0 - https (SSL) MUST STOP Trusteer Rapport in Network Preferences!

If you use Trusteer Rapport the OS X 10.8/Safari 6.0 Upgrade will stop access to HTTPS sites.
Click on the Rapport Icon at the top of your browser and access your "System Preferences" Stop Rapport and reboot Safari.
You can start Rapport again and reboot Safari and all should be fine.

Hello,
Please note that this issue is known to us and is already fixed in our latest version.
This version can be downloaded from http://www.trusteer.com/support/rapport-installation-links
In any case and with any question, you can send an email to [email protected] or visit www.trusteer.com/support and we would be glad to assist.
Sincerely,
Trusteer Technical Support

Similar Messages

Safari (5.1.7) on Lion (10.7.4) crashes when using Trusteer Rapport? Anyone else having this issue? I notice Rapport is 32 bit unlike all else in system preferences on my MacBook Pro.

Safari 5.1.7 keeps crashing (log points to Rapport) on my Mac OS X (10.7.4) Has anyone else having this issue with Trusteer Rapport?

Hello Mr. Jelfs,
Please note that Rapport is fully compatible with Mac OS Leopard, Snow Leopard and Lion.
We operate a 24\7, free of charge support team that will gladly answer any and all your questions and queries, and would be happy to assist with any problem reported.
We can be reached either via email to [email protected] , or by browsing to http://www.trusteer.com/support/report-problem .
Regards,
The Trusteer Technical Support team.

Swf file not loading over Https(SSL) on Internet Explorer...

hi ,
I have a .swf file used in html file and i try to browse using "https(SSL)".it will loads fine in Firefox, but in Internet Explorer wont able to load. When right-clicking it says "movie not loaded".
even i googling for the same and i got below option but i am still not able to get flash on html page. it will working fine in Internet Explorer,FireFox etc when we use"http".
1) add headers like "Cache-Control: must-revalidate" or "Cache-Control: max-age=0" or "Cache-Control: no-store" etc
2) use CrossDomain.xml
we also able to load swf in https on Internet Explorer but for that we have to do below settings in Internet Explorer browser.
1) Go to Tools --> Click on Internet Option --> click on Advanced tab --> Now in security section checked mark on "Do not save encrypted pages to disk".
but above way is not a proper way to resolve the https issue
Thanks.

found this within the Adobe forums, seems to solve your issue.
I would make sure to use the crossdomain file as well.

Fail to contact HTTPS/SSL p2 repositories

I'm trying to add a custom HTTPS/SSL url repository to install from it an get. The repo is fine and can be installed otherwise. [You can only use links to eclipse.org sites while you have fewer than 5 messages. Therefore the link lacks the protocol https://]
ERROR: org.eclipse.equinox.p2.transport.ecf code=1002 Unable to read repository at bndtools.ci.cloudbees.com/job/bndtools.master/lastSuccessfulBuild/artifact/build/generated/p2/content.xml.
javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.ssl.Alerts.getSSLException(Unknown Source)
at sun.security.ssl.SSLSocketImpl.fatal(Unknown Source)
at sun.security.ssl.SSLSocketImpl.fatal(Unknown Source)
at sun.security.ssl.SSLSocketImpl.handleException(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at sun.security.ssl.SSLSocketImpl.startHandshake(Unknown Source)
at org.apache.http.conn.ssl.SSLSocketFactory.createLayeredSocket(SSLSocketFactory.java:554)
at org.apache.http.conn.ssl.SSLSocketFactory.createLayeredSocket(SSLSocketFactory.java:435)
at org.apache.http.impl.conn.DefaultClientConnectionOperator.updateSecureConnection(DefaultClientConnectionOperator.java:216)
at org.apache.http.impl.conn.ManagedClientConnectionImpl.layerProtocol(ManagedClientConnectionImpl.java:394)
at org.apache.http.impl.client.DefaultRequestDirector.establishRoute(DefaultRequestDirector.java:814)
at org.apache.http.impl.client.DefaultRequestDirector.tryConnect(DefaultRequestDirector.java:615)
at org.apache.http.impl.client.DefaultRequestDirector.execute(DefaultRequestDirector.java:446)
at org.apache.http.impl.client.AbstractHttpClient.doExecute(AbstractHttpClient.java:863)
at org.apache.http.impl.client.CloseableHttpClient.execute(CloseableHttpClient.java:82)
at org.eclipse.ecf.provider.filetransfer.httpclient4.HttpClientFileSystemBrowser.runRequest(HttpClientFileSystemBrowser.java:259)
at org.eclipse.ecf.provider.filetransfer.browse.AbstractFileSystemBrowser$DirectoryJob.run(AbstractFileSystemBrowser.java:69)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)

Am 30.06.2015 um 15:11 schrieb Peter Kirschner:
> I'm trying to add a custom HTTPS/SSL url repository to install from it an get. The repo is fine and can be installed
> otherwise. [You can only use links to eclipse.org sites while you have fewer than 5 messages. Therefore the link lacks
> the protocol https://]
And you've double-checked that that repository can be correctly loaded/used through p2's normal UI?

My print feature in safari on my I pad has stopped connecting to my printer. Everything else connects no problem

Subject:
Subject:
My print feature in safari on my I pad has stopped connecting to my printer. Everything else connects no problem

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
AirPrint Setup and Troubleshooting
http://www.apple.com/support/ipad/assistant/airprint/
How to print from your new iPad using AirPrint
http://www.imore.com/print-ipad-airprint
AirPrint Basics
http://support.apple.com/kb/ht4356
 Cheers, Tom

How To Force Access Via HTTPS/SSL?

Forgive me if this question reveals how little I know about SSL, but... ;-)
What is the standard, best practice way to force a web client (via browser)
to use HTTPS/SSL? Our configuration is that the clients hit an IIS server
first, which then uses the WebLogic proxy/forward plug-ins to the WebLogic
server. The URLs that our clients follow come from an email we send, which
has https:// on the front. Access seems to stay in https as long as they
follow our links, but if the client edits the URL and changes https to
http, the access is now without SSL. How can I restrict access to https
only, or otherwise make sure they never use non-SSL access?
Thanks in advance for any explanations or pointers to references, etc.
-Paul

Paul,
You can disable the http port between IIS and weblogic. Configure only the SSL
connection. That way if any request comes to weblogic as http , it will be rejected.
Udit
Paul Hodgetts <[email protected]> wrote:
Thanks for the reply! What if the web server (the front end IIS server)
also serves static web pages that are allowed to be accessed without
HTTPS/SSL? It's primarily the requests forwarded through to JSP/servlets
on the WebLogic server that must use HTTPS/SSL.
Thanks,
-Paul
Robert Patrick <[email protected]> wrote:
One way would be to close the HTTP port in your firewall so that non-HTTPS
traffic cannot reach the web server...
Paul Hodgetts wrote:
Forgive me if this question reveals how little I know about SSL,
but... ;-)
What is the standard, best practice way to force a web client (viabrowser)
to use HTTPS/SSL? Our configuration is that the clients hit an IISserver
first, which then uses the WebLogic proxy/forward plug-ins to theWebLogic
server. The URLs that our clients follow come from an email we send,which
has https:// on the front. Access seems to stay in https as long
as they
follow our links, but if the client edits the URL and changes httpsto
http, the access is now without SSL. How can I restrict access tohttps
only, or otherwise make sure they never use non-SSL access?
Thanks in advance for any explanations or pointers to references,etc.
-Paul

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fi network. I have reset the network settings and still Safari will not open any web pages. Help!

My wi-fi connection is enabled, however Safari is telling me the server stopped responding. My laptop is working fine on the same wi-fe network. I have reset the network settings and still Safari will not open any web pages. Help!

Ralph..........Did as you suggested and I am still getting the message "Safari could not open the page because the server stopped responding". I am not able to connect with anything on the Internet. Frustrating since I am able to connect with my laptop. Thanks for the suggestion.

Constant Error; Adobe Flash Player 11.4 r402 has stopped working. But NOT running Trusteer Rapport.

I am experiancing this unbelieveably annoying and constant Flash error; Adobe Flash Player 11.4 r402 has stopped working.
But NOT running Trusteer Rapport, I never have, and it's not even installed on my computer. So what's causing this?

There were a couple AntiVirus/AntiMalware products that keep coming up, but I haven't validated that in the lab and don't want to call anyone out publicly without reporting the issue to them first.  If you could tell me what antivirus/antimalware products and versions you have installed, that would be helpful.
So, third party stuff aside, I'd like to know more about the crashes your seeing:
1.) Please provide links to the Firefox crash reports. If you have multiples, the first few would be great.
     In Firefox, type about:crashes in the address bar
     If the link starts with "bp...", it's already been submitted -- just right-click on it and copy the link, and paste it into the reply here.
     If not, click it to submit it, and copy the subsequent link.
2.) In firefox, type about:support
     Just copy and paste the output into the reply.
3.) In Firefox, type about:plugins
     Please copy and paste the output into the reply
4.) Please provide the output of the DirectX Diagnostic Utility
     Click Start > type "dxdiag" [enter]
     Click Save All Information
     Copy the output of the file into the reply, or use Adobe SendNow/DropBox/PasteBin to share the file.
5.) If you can provide an exact URL and step-by-step instructions on repeating the crash (if it's consistent), that would be really helpful. My goal is to build out a configuration that matches yours as closely as possible, reproduce the problem and then debug it.
If you're not comfortable sharing that diagnostic information publicly, send me a private message. Just click my name and use the options on the right.
Thanks!

Column value ' ' too long - must stop', probably configuration error

Hi Experts,
I have a Proxy to File Scenario when I execute it I get this error in RWB. Can you please help me on this:
Message processing failed. Cause: com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long - must stop', probably configuration error in file adapter (XML parser error)''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'java.lang.Exception: Column value ' ' too long - must stop', probably configuration error in file adapter (XML parser error)'
Thanks
Srikanth E

Hi,
if there is any empty tag coming from source then target structure tag will not be created and because of which ur payload structure and FCC configuration is not matching.
To use map with default between source and target strcture so in case source tag dont have value target structure will be created because of mapwithdegfault fuction and ur FCC will not fail.
Open SXMB_MONI output payload and compare the structre with Data type u will se for no source value target tag is not created at all and FCC is failed.
please refer below thread,
0 byte txt file using receiver File Adapter
regards,
ganesh.

Https ssl config Oracle AS, webcache, portal...almost works

Hi,
I have searched the forums and I havent found anything that works for me.
I have Oracle infrastructure on one server, and Oracle App server/portal on another server. I can get as far as the http server showing the "welcome to oracle" page in https form. When I try to access a page in the portal (plsql) I get a blank page. It does convert the "https://myserver:xxxx//pls/portal/url/page/IRWEB/HOME
" to "https://myserver:xxxx/portal/page?_pageid=73,86254,73_86264:73_86316:73_8632...." but nothing comes up.
Also, it uses the Infrastructure server for single-sign-on...so I need to make the app server do the single sign-on. I've tried by adding /pls/orasso entry in DADS.conf of http server..
So as far as I can tell...the http server IS operating in https/ssl, but the single-sign-on and the pages in the portal are not.
I have to do everything manually since I am using 10.1.2 (no Oracle Collab Suite installed, so no SSLConfigTool and other assistants)
Here is what I've done to get https://myserver:xxxx/ to come up ok.
server 1: Oracle Infrastructure and Oracle database release 1 10.1.2.0.0
server 2: Oracle Application Server / Portal with webcache release 2 10.1.2
using Oracle Wallet for certificate,
http server -> process management "ssl-enabled",
http server -> advanced -> ssl.config: SSLWallet file:, SSLWalletPassword, virtual host for ssl
webcache -> added settings for ssl (I used the current entries for non-ssl as a guide for the ssl entries)
Interesting issue...with the ports in the ssl.conf file example:
Port 4459
Listen 4459
VirtualHose myserver.blah.edu:4450
Port 4458
When I get the blank page trying to use ssl and 4459, I can manually change the url in my browser to 4458 (or maybe its the other way around) and get this message: "Error: The portlet could not be contacted"
Is this a problem with webcache? Do I have to do any ssl config on the server with the database?
I've even tried disabling the webcache, both with the oracle sql script and through web interface but neither made a difference...same problem.
Any help would be greatly appreciated..I feel as if I'm almost there.
If I did not post enough info for accurate help, please ask what you need to know to provide help! Thanks in advance.

Hi,
Yes you can go for SSl configuration without re-installing any of the components.
Regards,
access_tammy

How do I get Safari to show http?

I have read that sites showing https are secure for payments. However I cannot get Safari to show the http part of the address. How do I do this?

Thank you QuickTimeKirk. I'd still like to know though how I get Safari to show http in the address

Https / SSL needed for my website

I hope someone can help me.
I have a website
http://www.to-shea.com
I purchased a SSL package from register.com (they host my
site too). They told me "anyone who sees my site would see the
https prefix. I received an email from them stating that they could
not put the https prefix on my site, although it is on their secure
servers. needless to say, I was quite upset. Anyone on the web
knows that an https prefix means it is a secure site. Is there ANY
thing I can do to fix this problem. (it only cost me $28.00)
Is there a program I can use to force the https prefix.
I am on a Mac (OSX) and I use Dreamweaver CS3. I am a LITTLE
familiar with html code but not a alot.
Can someone there help me???

What exactly are you asking a question about?
https and SSL are usually only used for secure transfer of
information when
ordering and sending sensitive information. You do not want
people viewing
the web site using https and not completing an order to be in
https SSL
because it slows things down. It involves encoding/decoding
of everything in
the page including graphics.
In other words- I shop at the site. I add things to the cart.
I am viewing
the site in http until it's time to check out and i am asked
for my card
numbers.
Does the certificate not work or throw an error?
Do you understand how to change links from https to http?
When to use http or https?
And if you want to force https, what is the server side
scripting language.
What's the question please.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

How the external system will talk to ECXpert 3.5 for transfering files via HTTP SSl?

We are using ECxpert3.5 on Solaris box. One of our Trading Partner want to communicate through HTTP-SSL and we are doing XML/EDI mapping. Could you guide us what steps we need to take care to implement this.
How the external system will talk to ECXpert for transferring files. (We need the syntax for the URL). How ECXpert will receive XML file through HTTP-SSL protocol from External System and file submittion.
Please send is there any other document which explain about. Thanks in advance for your help. [email protected] or [email protected]

Hi Steve,
You can bring the GRC framework to a state equivalent to a raw install by following options:
Option 1.) You should have a base-line backup before GRC installation. If so then apply that base-lin backup and deploy GRC components. If there is no base-lin backup, then
Option 2.) Uninstall and re-install J2EE and then follow up with rest of the installation process. If you don't want to go through re-install process, then
**Correction to Option 3**
Option3.) SAP is in process of creating a SAP Note for Delete script, Instead of delivering Delete Script script via OSS message. Will update you as soon as the Note gets released.
Please refere to Note # 1416728 to Manage your deletion in RAR 5.3 SP10.
Hope this helps.
Best Regards,
Sirish Gullapalli.

I am having trouble with my JAVA Applet. It isn't functioning on SAFARI. It seems to have stopped working and I used it on SAFARI last year. Any suggestions ?

I am having trouble with my JAVA Applet. It isn't functioning on SAFARI. It seems to have stopped working and I used it on SAFARI last year. Any suggestions?

Post in the Safari forum area.

Safari 6.0 - https (SSL) MUST STOP Trusteer Rapport in Network Preferences!

Similar Messages

Maybe you are looking for