Safari 6.02 Lion not prompting for pdf with password

Hi,
Safari is no longer prompting for a password when the pdf is protected.
Firefox will prompt correctly for the same PDF and so does Preview.
Normal PDF's open fine in safari.

Just a normal DSL connection. Thank you for taking an interest.
Having puzzled over this for weeks before asking the question, I (sort of) solved it this afternoon within an hour of doing so. I found and deleted the safari plist file (not that easy a task because for some reason Finder doesn't volunteer to show my user/library folder). That also erased the developer menu, but Safari is now once again working as it should with iCloud and YouTube. Because I no longer have the menu to look at it, I can't actually prove that it's showing to them as the latest version, but it certainly looks like it.
Again thank you for answering.

Similar Messages

  • HT203783 Safari and iCloud Keychain not prompting for password

    In Safari 8.0 (Yosemite) a prompt appears telling me to turn on iCloud Keychain to have a secure password suggested. I already have it on and all autofill boxes are enabled in Sarari. What is missing to have it suggest the password?

    The way to check is to go to Control Panel and search for "iCloud".  If iCloud appears (see first image below), double-click on it.  This will be the iCloud control panel for Windows.  If he is syncing his computer with his iCloud account it will look similar to the second image below.

  • How to make dyn/admin not to prompt for username and password?

    Hello all
    How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
    Your inputs will help a lot.
    Thanks,
    Sundar

    Hi,
    You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
    Gopi

  • HT1595 Will not prompt for new password, if invalid password was entered

    Will not prompt for a new password after an invalid password was entered

    I am installing a Apple TV, when I select my router from the list it prompted me for the password. I entered an old password in error, so it would not connect. Now when I reselect my router it does not prompt for a new password, it uses the old incorrect one and does not connect. I need to be able to re-enter the correct one.

  • Safari 5.0 will not prompt to remember username and passwords

    Safari 5.0 will not prompt to remember username and passwords for new sites I joined. It will remember the old ones but not the new. Under Safari< preferences> the autofill in all 3 places is checked. A box used to drop down when joining the site for the first time and say... Save Never Not Now.
    Now nothing happens. Anyone got any suggestions?
    Thanks

    Hi,
    Go to ~/Library/Preferences and move the com.apple.keychainaccess.plist file to the Trash.
    Restart your Mac.
    If that didn't help, open Keychain Access (Applications/Utilities) Select Passwords on the left.
    Delete the *Safari Forms Autofill* keychain.
    Relaunch Safari.
    Carolyn

  • Report does not prompt for parameters when SeparatePages=False

    Hi all. We are using CR2008 Basic w/SP1 along with VS2008. Within our application, reports pull up fine and prompt for parameters using the CrystalReportViewer against the web service. SeparatePages is set to True. We want to change SeparatePages to False, but when I do that any report that should prompt for parameters is not.
    The reports were created in CR 8.5. We have upgraded them to CR2008 (open, refresh, save) which has greatly increased performance. With some further testing, I've discovered that if I take a report that doesn't currently have any parameters and add one via VS2008 report designer, it WILL prompt for the parameter when I run it in our application with SeparatePages=False.
    So I'm leaning that the problem has to do with the reports originally being created in 8.5. I've tried modifying an existing report with parameters, deleting parameters and re-adding, but I still can't get these to prompt for parameters with SeparatePages=False.
    Again, these same reports prompt for parms and work fine as long as SeparatePages=True.  I'm hoping someone might be able to shed some light on this. There are over 400 reports so re-creating them from scratch under CR2008 will be a painful option
    If I need to provide any additional information just let me know. Thank you!
    Sheila

    We are still working to resolve this issue. Testing has shown that for reports that don't return a lot of data, the prompt for parameters will display. But for larger reports, we just see the hour glass and the parameter prompt never displays. It's almost like the reports are trying to return the full dataset without any paramters being passed BEFORE it will prompt for parameters. This would explain why smaller reports will prompt and larger reports never will (?). Not sure that is what is happening.  Again, with SeparatePages=True we are immediately given the parameter prompt. With SeparatePages=False we run into the issue of no prompts.
    Here's the code behind if it help:
    ReportDocument report = new ReportDocument();
    try
        String rptFileName = @"App_Data\Reports\" + Request.QueryString.GetValues(0).GetValue(0).ToString();
        log.writeLog("Loading Report: " + rptFileName);
        String rptFile = Server.MapPath(rptFileName);
        report.Load(rptFile);
        report.Refresh();
        ConnectionInfo crConnectionInfo = new ConnectionInfo();
        log.writeDebugLog("ServerName : " + rProperties.ODBCSource);
        crConnectionInfo.ServerName = rProperties.ODBCSource;
        log.writeDebugLog("DatabaseName : " + rProperties.ODBCSource);
        crConnectionInfo.DatabaseName = rProperties.ODBCSource;
        log.writeDebugLog("UserID : " + rProperties.ODBCUser);
        crConnectionInfo.UserID = rProperties.ODBCUser;
        log.writeDebugLog("Password : " + rProperties.ODBCPassword);
        crConnectionInfo.Password = rProperties.ODBCPassword;
        foreach (CrystalDecisions.CrystalReports.Engine.Table table in report.Database.Tables)
            TableLogOnInfo crTableLogOnInfo = new TableLogOnInfo();
            crTableLogOnInfo.ConnectionInfo = crConnectionInfo;
            table.ApplyLogOnInfo(crTableLogOnInfo);
    catch (Exception err)
        log.writeLog("Error Loading Report: " + err.ToString());
        this.lblError.Text = err.ToString();
        this.ErrorTable.Visible = true;
        this.ReportTable.Visible = false;
        return;
    CrystalReportViewer1.HasCrystalLogo = false;
    CrystalReportViewer1.ReportSource = report; // _serverFileReport;

  • I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried

    I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried as it my new ipod and am not able to restore it.pls help.

    i have done that .:(..PLs help me restoring it to older version.though i have a back up file.in itunes..am not able to restore it.as itunes is not asking for resotre option..pls help me

  • Adcfgclone.pl dbTier is not prompting for ORACLE_HOME variable

    hi,
    adcfgclone.pl is not prompting for ORACLE_HOME variable.
    and erroring out with
    Checking the port pool 12
    done: Port Pool 12 is free
    Report file located at /appsutil/out/portpool.lst
    RC-00203: Unable to create/write to file /appsutil/out/portpool.lst.
    Complete port information available at /appsutil/out/portpool.lst
    RC-50004: Error occurred in CloneContext:
    AC-00005: No write permissions for creating the Context file - /appsutil/temp.xml
    Raised by oracle.apps.ad.context.AppsContext
    Check Clone Context logfile /mnt/ebs/PTCH/bin/db/tech_st/12.1.0/appsutil/clone/bin/CloneContext_0421032159.log for details.
    ERROR: Context creation not completed successfully.
    For additional details review the file /tmp/adcfgclone_6999.err if present.
    DOC refrred: How To Quick Solve This Post Clone Error : RC-50004, AC-00005: No Write Permissions For Creating The Context file - /tmp/temp.xml ? (Doc ID 842948.1)
    in the above DOC please let me know how to perform ANALYSIS part..
    Database version: 12.1.0.2.0
    Applications version: 12.1.3
    OS                         : OEL6.4
    please suggest
    Thanks
    Raghavendra

    are you able to create a file with os user which is running the rapidclone in /appsutil/temp.xml
    please check and update
    use touch command to create a file
    did you gave correct oracle home when prompted by rapidclone ?
    If you have set the right permissions at /tmp and the problem remains then check if at the post cloning steps at the dbTier, the scripts asks for the "Oracle Database Home"
    Target System RDBMS ORACLE_HOME Directory [/u01/clone/db/11.2.0/] :
    post the output of below command
    $ls -ltr ( in appsutil folder )
    AppsMasti
    sharing is Caring

  • OVM Server 2.1.2 does not prompt for Networking

    OVM Server 2.1.2 does not prompt for a network setup (ie DHCP or static IPs).
    - I tried re-installing this several times
    This same machine works with native Enterprise Linux 5.2 x86-64 networking.
    The motherboard has two onboard Realtek 8111C chips (10/100/1000 Mbit)
    http://www.gigabyte.com.tw/Products/Motherboard/Products_Overview.aspx?ProductID=2842
    Will setting up networking by hand work with OVM Server 2.1.2?

    OK I finaly made my Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller to work.
    First install an Ethernet card in your box that OVM supports. This to make the OVM installation run smoothly.
    When OVM is up and running follow the steps in [Mini-HOWTO] RPMs needed to compile a kernel-module on / for VM Server to get a working environment to compile modules.
    Now get the driver for the unsupported card from ftp://61.56.86.122/cn/nic/r8168-8.008.00.tar.bz2 .
    Unpack the file by running;:
    tar -jxvf r8168-8.008.00.tar.bz2
    Now follow the steps in the included readme file to compile and install the driver.
    After this I edited the file /etc/modules.conf and changed the line
    alias eth0 xxx
    to
    alias eth0 r8168
    I then turned of the machine and removed my temporary network card.
    When booted I ran system-config-network to configure the network once more to the original values I entered when I installed.

  • I have OS X 10.8.5 trying to upgrade. Have downloaded latest OS X Maverick but to install I am prompted for the Admin Password. I don't believe one was ever set up. I have tried my Apple Id Password but not accepted, Advice appreciated.

    My system is Mac HD OX S 10.8.5. I want to upgrade 10.9.1 and have downloaded it. However, to install it I am prompted for the Admin Password. I don't believe one was ever set up. I have tried my Apple Id Password but not accepted, Advice appreciated?

    If you have 10.8.5 you don't have a PowerPC Mac (PPC).  PPC is for pre-2006 Macs.   Go to Apple menu -> About This Mac to make sure you have an Intel Mac and that you didn't flip the 5 and 8 in your operating system indication.  If you actually have 10.5.8 but you have Intel it gets a lot more complicated to install 10.9.
    10.5.8 is the maximum for PowerPC.
    10.6 can be upgraded on Intel with this tip:
    https://discussions.apple.com/docs/DOC-2455
    And it also help you get up to 10.6.6 or 10.6.8 as needed.
    https://discussions.apple.com/docs/DOC-6271
    will help someone with 10.5.8 determine if they are ready to jump to 10.7 or later.
    If you have 10.8.5, you must install 10.9.0 first (free from the Mac App Store) to get to 10.9.1.
    Backup your data:
    https://discussions.apple.com/docs/DOC-1992
    and check http://www.roaringapps.com/ and your printer, scanner, and peripheral  drivers are compatible with third party vendors before upgrading to 10.9.

  • Windows 8 setup does not prompt for license key, then fails, on hp envy notebook

    Hi,
    I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
    I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
    setup did not prompt for any license key!
    I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
    Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
    Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
    Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
    I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
    So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
    Regards
    Pierre

    Hi,
    I am trying to install Windows 8 pro on an hp envy dv7 notebook, that came with a Windows 8 home pre-installed.
    I tried by running the setup from the CD inserted while Windows was running, but setup complained that no license key matched the CD and faled. Strange enough,
    setup did not prompt for any license key!
    I tried the setup on another, older PC, there it did prompt for license key and setup ended well. At least it was not the CD.
    Then I retried booting from setup CD, it loaded files, then started the setup without promptiing for any license key, and failed again.
    Then I tried with a Windows 7 CD, same behavior, not prompting for license key and fail to setup.
    Then I "repaired" Windows by booting from CD and reformatting the hard drive, dropping all Windows partitions, then restart setup from CD, but it still behaved the same way: not prompting for license key, and failing to setup.
    I called the HP support, and they answered that it was a problem for Microsoft (what a good support, the only place where the problem occurs is the hp computer, but let the Customer call Microsoft instead).
    So here I am, did any of you use an hp computer, and succeeded in installing Windows 8 PRO NFR from Technet plus on it?
    Regards
    Pierre
    Is it a Chinese Editon preinstalled in HP notebook?
    Windows 8 preinstall machine includes a license key in system firmware. So Windows 8 setup will use this key rather than pop up product key input text pop. It is a Microsoft by design issue. So no good mathod to workaround this problem.
    http://whqlcn.wordpress.com

  • Not prompting for the parameters of stored procedures while running

    Hi All,
    I have a stored proc which takes in 3 parameters and execute a copy of a record in a table based on the 3 parameters which I pass in.
    When I use the proc in crystal reports (Crystal Reports 2008), it is not prompting for the parameter values if we execute the report directly. It's prompting the values only when I do 'Veriyf Database' from the menu. Why is it not prompting for values when executing directly. Am I missing anything here?
    Also, I have a C# .net project which uses the report and take in input parameters. Even there, previously, I used to call the VerifyDatabase () first and then the SetParameterValues () which was working fine for regular expressions. But for this report (which uses stored procedure), it is not giving the desired output (copying data), even though the report doesn't fail to run. But when I changed the order of the call to have SetParameterValues () before the call to VerifyDatabase (), it works fine (copies the data for the given input parameters).
    Please let me know what is missing here? Is the order of the call to VerifyDatabase () and SetParameterValues () matters? If so, why is it working for regular expressions and not for stored procs?
    Please clarify.
    Thanks,
    Siva.

    I recommend posting this to the Crystal Reports Design forum. As I read it:
    When I use the proc in crystal reports (Crystal Reports 2008), it is not prompting for the parameter values if we execute
    the report directly. It's prompting the values only when I do 'Verify Database' from the menu. Why is it not prompting
    for values when executing directly. Am I missing anything here?
    The issue is in the CR designer 1st. So it needs to be resolved there before moving on to the CR SDK in .NET.
    Link to CR design forum:
    SAP Crystal Reports, version for Visual Studio
    Ludek

  • Security option is not working for PDF Report

    security option is not working for PDF Report , e.g password , bug??

    what version of SQL Developer are you using?

  • Infoview not prompting for parameters

    Hi all,
    quite basic question but I have spent hours on this now so decided to ask.
    I have a Crystal report based on BW query which has date range as mandatory variable.
    How do I control whether the Crystal report promts for that variable or not when opening. When I open the Crystal Report from INfoview it does not prompt for this parameter, although it did so previously.
    Is the setting with the paramter in the CR or with report options?
    thanks

    Hi,
    can you please check if the option Save data with the report is selected? You will find this under the File menu in the CR designer. If the option is selected then the report will not try to fetch data from the database when opened and therefore will not prompt you for the date variable. In this case you will have to refresh the report explicitely in the InfoView
    Regards,
    Stratos

  • Why is Mountain Lion not available for Mac Pro 2007???

    Why is Mountain Lion not available for Macpro 2007 eventhough this computer is not having old generation hardware like of 15years ago's computers!! I am surprised to know about that. when this mac pro have 2 xeon processor, 8GB ram, OS 10.7.5 (Lion) etc etc. so why is this not compatible for mountain lion???
    Very Sad for us - the buyer of so costly Macpro ....
    so does the Apple want to say we should buy or upgrade our purchased costly apple products every 5 years ??!!

    This is a user forum. We are all users like yourself. Conjecture about Apple's products is not appropriate discussion in these forums.

Maybe you are looking for