Safari 6 does not display motion jpegs from IP camera

I do have several IP cameras from Axis and other companies. Until I upgraded to Moutain Lion / Safari 6, they worked fine. But in Safari 6, the motion JPEG is no longer streaming. It streams a few frames, but then stalls. Has anybody seen this as well?

I will say that since I originally responded above that although Firefox works almost all the time, I have had a couple of occasions where Firefox as become unresponsive while streaming pictures from my Panasonic cameras... The behavior is much worse on Safari where I can, in effect, only get one or a view images before it freezes and no more streaming occurs until you leave that streaming page and come right back to it, where it sends a few more frames and then freezes again... Firefox never does any of that. However, I do believe the couple of times where it has become unresponsive while streaming the same video images is likely related to a similar problem that Safari has under Mountain Lion. But until Apple makes some improvement I have basically needed to stop using Safari to view images from these cameras... I haven't tried Chrome... Maybe I will give that a shot next...
And don't forget to send feedback to Apple at
http://www.apple.com/feedback/
thanks... bob...

Similar Messages

Video does not display when sending from Final Cut Pro to Motion

Suddenly, when sending an audio & video sequence to Motion, a new Motion file is created, and all my layers come in properly, but the video does not display.
The audio plays fine, and Motion clearly know that there are video tracks there, but it does not display them.
Additionally, when rendering the Motion file back in FCP, it turns in to black video.
I have previous sequences within the same project that were sent just fine, and are editable properly, but any new ones I try to create just come out black.
Help, please?

Do you have Motion mistakenly set to render out with an Alpha channel?
Double click your Motion clip in the Timeline. Go to Modify > Composite Mode in the menu bar and set the Alpha to "None/Ignore".

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

IMovie '11 Does Not RecogniseMy Motion JPEG Still Camera?

Fallen at the first hurdle!
My Panasonic FX60 Digital still camera that shoots 1280x720 Motion JPEG is not recognised, though I can see its icon on the desktop and can copy the video onto my desktop.
If I click File>Import from Camera, I get a beautiful image of me from the iSight camera, which whilst being a pleasure to behold, does not help with the importation of video.
Will I have to copy to the desktop etc. or can the beast be made to communicate with my camera?

Ian R. Brown wrote:
... and tried dropping them on the iMovie interface but they just jump back. ...
Putting the AIC file in my "Movies" folder or anywhere else...
stop stop stop ....
iM is NOT Finalcut, as I told you before.
it is essential to use iM's own import routines to make 'videos' accessable for iM. that includes the 'right' formats (=iM cares for conversion) and the right location (= iM Events).
You HAVE to import via 'import from camera' AppleMan1958 mentioned above - the m-jpegs my Lumix FZ38 records are readable, appear as 'clips' in the camera-import dialog. I've heard of trouble when m-jpg and avchd is on same SDcard... perhaps for your first steps, keep it simple ...

Safari 5 does not display DIV properly - had to downgrade to 4.0.5

Say you have a web page with
Then some JavaScript code later:
document.getElementByID('div_a').style.display='inline';
Works fine under Safari 4.0.5 (and other browsers), ie the DIV content is displayed.
DIV is not displayed under Safari 5. No JS error raised.
/A

Entry above had html code erased. Discard and see below:
Say you have a web page with
<div id='div_a' style='display:none'> some HTML objects here </div>
Then some JavaScript code later:
document.getElementByID('div_a').style.display='inline';
Works fine under Safari 4.0.5 (and other browsers), ie the DIV content is displayed.
DIV is not displayed under Safari 5. No JS error raised.
/A

Adjusting date and time does not work for pictures from one camera.

I have a set of pictures taken with a Casio EX-Z20 camera in my Aperture 2 library. Because the clock of this camera was off by a few hours I changed them all at once with the option "Adjust date and time...". This worked well and when I sorted the images from different cameras by date in Aperture they were in the order.
When exporting all the images as JPEG the images in the set from this camera was reset to it's original.
That was very strange, I decided to try and change the date of these images in the master files as well by checking the checkbox "Also change master files".
When I change the date from 15-10-2008 18:34:44 to 16-10-2008 10:34:44 (+16 hours) the date of the image changes to 16-10-08 01:36:43 GMT+02.00 (+9 hours, 1 minute, 59 seconds).
When I change the date from 16-10-08 01:36:43 to 16-10-2008 19:36:43 (+18 hours) it ends up as being 16-10-08 10:38:42 (+9 hours, 1 minute, 59 seconds)
When I change the date from 16-10-08 10:38:42 to 16-10-08 10:48:42 (+10 minutes) it ends up as 16-10-08 01:50:49 GMT+02:00 (-8 hours, 47 minutes, 7 seconds)
I have worked around this problem by adding some hours to the desired time and eventually got it about right, but this is still a very annoying problem. Has anyone else encountered it or know of a way to avoid it?

{quote:title=JohniBook wrote:}
Has anyone else encountered it or know of a way to avoid it?
{quote}
I certainly have had issues regarding wrong dates, time stamping and DNG's in Aperture. There have been posts here from others as well with the same kind of date problems.
I have reported the bug to Apple and hope for a solution to the issue in a near future.
Regards
Paul K

Safari 6 does not display pdf files!

No matter what website I go to if I need to display a pdf file especially on government sites which I deal with a lot being a paralized vet. I have to tell you I am disappointed with the last couple vers. of Safari. Half the time auto fill doesn't work. Many times i'll just type the name of the address and in past versions of Safari it would fill in the other stuff, www., .com, etc. Well not any more. I've switched to making Google Chrome since it displays pdf's. Apple, you cn do better than this!!! O, by the way I've been using Apple products since the iic, and I've been using the internet from it's beginnings.This is the first time I"ve had any complaint about Safari up until now it's been my browser of choice.
Signed,
Disaiiusioned

David...
All browsers require some maintenance at one time or another, or troubleshooting whether it's Safari, or Chrome, Firefox.. etc. I've yet to have any issues with Safari 6 on Mountain Lion.
For the PDF issue...
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here: /Library/Internet Plug-Ins
Click Go then move the AdobePDF Browser plugin (or just PDF Browser plugin) from the Internet Plug-Ins folder to the Trash. Quit then relaunch Safari to test.
For autofill. Try troubleshtooting the Safari.plist (preferences)
Back to the Finder. Go > Go to Folder.
Type this: ~/LIbrary/Preferences/com.apple.Safari.plist
Click Go the move the Safari .plist file to the Desktop. Quit then relaunch Safari to test.
If that that helped the autofill issue, move the .plist file to the Trash. If not, move it back to the Preferences folder.
If that didn't work, Go > Go to Folder.
Type this: ~/LIbrary/Caches/com.apple.Safari/Cache.db
Click Go the move the Cache.db file to the Trash. Quit then relaunch Safari. Try autofill.

Lightroom does not import my images from 70d camera sd card when there is video on it

I am attempting to import images into Lightroom 5 from a wedding that was shot on a 70d canon camera and recorded to an sd memory card. There are also two short videos (less than 2 minutes each) on the card. Lightroom acts as if it is importing with the progress bar showing but it just hangs there and nothing gets imported. I even tried unchecking the two videos but still nothing. I had no trouble importing images when I didn't have any videos on the card.

I have the very same problem. I only noticed it in LR 5.4/5.5. If there are any videos on the card, then Lightroom is unable to see or import any of the RAW files on it. I currently have to import the videos, disconnect the camera, delete the video files, and reattach it before Lightroom can see the CR2 files. This was not an issue in Lightroom 5.2/5.3 as far as I know. I have not changed SD cards or anything else other than upgrading to Lightroom 5.4 (and later 5.5 when I found the problem). Any help is appreciated.

Camera raw does not recognize raw files from new camera

Tried downloading and installing Bridge update, to no effect. Working with Macbook Pro, OS X 10.9.4. Adobe Bridge version 4.0.5.11. Camera is Fujifilm X-E2, and is mentioned in the Camera Raw list as a file type Camera Raw should recognize.

You're wrong, reno1950.
That camera was first supported by ACR 8.3, which needs at least Photoshop CS6 to run.
Since you say you're on Bridge 4.0.5.11, you must be on Photoshop CS5.
You have two choices: either upgrade to CS6 for $200, or look for, download, install and run the Adobe DNG Converter version 8.6 on the folder(s) containing the raw files from your Fuji camera to raw DNGs that you can then open in your version of Adobe Camera Raw.
Note that neither Bridge nor Photoshop can open raw files nor raw DNGs, only Adobe Camera Raw can.

Safari does not display PDF files?

My Safari browser does not display pdf files. Whenever a site I'm reading links to a pdf file, a new page open in black but without content.

Try this ...
Open a Finder window then from the menu bar click Go > Go to Folder
Type or copy paste the following:
/Library/Internet Plug-Ins
Click Go.
If you see the: AdobePDFViewer plugin in the Internet Plug-Ins folder, move it to the trash.
Restart your Mac and try opening a PDF file.

Safari on my account does not display images when you open a picture.

I have Snow Leopard 10.6.8 installed. Safari on my account does not display images most of the time when you open a picture like (www.example.com/example/example.jpg or any other format). If the image does not display, I can drag from the corner, it displays the image. However, pdf does not work at all. I have to choose open in Preview to view the pdf file. I can even show the example:
Sometimes the images work like right now.
2. This is the time when the images do not work.

Hi all the real problem was this...
The issue was that the wee rubber eye piece around the viewfinder had slipped out of its seat slightly and was covering the sensor for the LCD. I Just checked the rubber eye piece bit pushed right down till it clipped into place and now not obstructing the LCD sensor as the picture displays both with the LCD auto off enabled or disabled !! simple thing but a massive trap !

CRVS2010 beta - Date field from database does not display in report

Hi there - can someone please help?!
I am getting a problem where a date field from the database does not display in the report viewer (It displays on my dev machine, but not on the client machines...details given below)
I upgraded to VS 2010
I am using the CRVS2010 Beta
My development machine is Windows 7 - and so is my fellow developer's
We are using Microsoft SQL Server 2000
We run the queries within VS and then we send the data table to VS using .SetDataSource
We have a few reports which display the date on our dev machines (whether we run the EXE or from within Visual Studio)
When we roll out to the client machines (running Windows XP SP3) then everything works, except that the date does not display (on quite a few reports)
This is the only real issue I have had - a show stopper for me
The rest works well - any input will be greatly appreciated
Regards,
Ridwan

Hi Ridwan,
After much testing I have it all working now using CRDB_adoplus.dll as a data source ( XML )
Alter your Config file to look like this:
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
Then using the code below, and CR requires the Schema to be able to read the date format.
private void SetToXML_Click(object sender, EventArgs e)
CrystalDecisions.CrystalReports.Engine.ReportDocument rpt = new CrystalDecisions.CrystalReports.Engine.ReportDocument();
ISCDReportClientDocument rcd;
rcd = rptClientDoc;
string connString = "Provider=SQLOLEDB;Data Source=dwcb12003;Database=xtreme;User ID=sb;Password=password";
string sqlString = "Select * From Orders";
OleDbConnection oleConn = new OleDbConnection(connString);
OleDbDataAdapter oleAdapter = new OleDbDataAdapter(sqlString, oleConn);
//OleDbDataAdapter oleAdapter2 = new OleDbDataAdapter(sqlString2, oleConn);
DataTable dt1 = new DataTable("Orders");
oleAdapter.Fill(dt1);
System.Data.DataSet ds = new System.Data.DataSet();
// We need the schema to get the data formats
ds.WriteXml("c:
sc.xml", XmlWriteMode.WriteSchema);
//Create a new Database Table to replace the reports current table.
CrystalDecisions.ReportAppServer.DataDefModel.Table boTable = new CrystalDecisions.ReportAppServer.DataDefModel.Table();
//boMainPropertyBag: These hold the attributes of the tables ConnectionInfo object
PropertyBag boMainPropertyBag = new PropertyBag();
//boInnerPropertyBag: These hold the attributes for the QE_LogonProperties
//In the main property bag (boMainPropertyBag)
PropertyBag boInnerPropertyBag = new PropertyBag();
//Set the attributes for the boInnerPropertyBag
boInnerPropertyBag.Add("File Path ", @"C:\sc.xml");
boInnerPropertyBag.Add("Internal Connection ID", "{680eee31-a16e-4f48-8efa-8765193dccdd}");
//Set the attributes for the boMainPropertyBag
boMainPropertyBag.Add("Database DLL", "crdb_adoplus.dll");
boMainPropertyBag.Add("QE_DatabaseName", "");
boMainPropertyBag.Add("QE_DatabaseType", "");
//Add the QE_LogonProperties we set in the boInnerPropertyBag Object
boMainPropertyBag.Add("QE_LogonProperties", boInnerPropertyBag);
boMainPropertyBag.Add("QE_ServerDescription", "NewDataSet");
boMainPropertyBag.Add("QE_SQLDB", "False");
boMainPropertyBag.Add("SSO Enabled", "False");
//Create a new ConnectionInfo object
CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo boConnectionInfo =
new CrystalDecisions.ReportAppServer.DataDefModel.ConnectionInfo();
//Pass the database properties to a connection info object
boConnectionInfo.Attributes = boMainPropertyBag;
//Set the connection kind
boConnectionInfo.Kind = CrConnectionInfoKindEnum.crConnectionInfoKindCRQE;
//*EDIT* Set the User Name and Password if required.
boConnectionInfo.UserName = "";
boConnectionInfo.Password = "";
//Pass the connection information to the table
boTable.ConnectionInfo = boConnectionInfo;
//Get the Database Tables Collection for your report
CrystalDecisions.ReportAppServer.DataDefModel.Tables boTables;
boTables = rptClientDoc.DatabaseController.Database.Tables;
//For each table in the report:
// - Set the Table Name properties.
// - Set the table location in the report to use the new modified table
boTable.Name = "Orders";
boTable.QualifiedName = "Orders";
boTable.Alias = "Orders";
rptClientDoc.DatabaseController.SetTableLocation(boTables[0], boTable);
//Verify the database after adding substituting the new table.
//To ensure that the table updates properly when adding Command tables or Stored Procedures.
rptClientDoc.VerifyDatabase();
MessageBox.Show("Data Source Set", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information);
Thanks again
Don

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Safari on iPad does not display GIF image anymore after upgrade to iOS 4.3

1) Could anybody (especially those in Apple iOS or Safari teams) advise me why the Safari on my iPad cannot display some images (probably in GIF formats) on some webpages anymore, after I upgrade my iPad to iOS 4.3? These images on the webpages can be properly displayed on when my IPad runs with iOS 4.2.1. There should be no problem with these embedded image files because they can still be properly display in Safari running on my Macbook air.
2) Is there any solution to this problem?
3) Is it possible to downgrade my iPad back to iOS 4.2.1?

I am having the same issue with two different ipads (one Wifi and one Wifi-3g) running on our home network (Verizon FIOS). The website in question is www.tvwc.com and the main logo in the upper left corner, a .gif, does not display, only a "?". Other images on the site, in .jpg format, display correctly.
I was running 4.2.1 and am now just upgrading to 4.3.

Site does not display in Safari

Trying to view a website that displays fine in FireFox and IE, but appears blank when viewed in Safari. Any suggestions, ideas?
http://www.casasmith.com/Web/Form/Vikings/Default.aspx

I would say that it does not display in Safari because it is not standard html document. The errors shown in the W3C Validator, especially the first one, indicate they are using proprietary Microsoft extensions. The fact that the page was created using "Microsoft Visual Studio .NET 7.1" bolsters this view. Safari is the least forgiving of browsers that are not written to the HTML/XHTML standards.

Safari 6 does not display motion jpegs from IP camera

Similar Messages

Maybe you are looking for